Disk Scanner At Start Up
Jan 2, 2010Every 2nd day when i start up Windows i get a message that it wants to scan my drive C.
Now i acdendilty told it to oncce, and now i would like to stop it coz it is annoying
How do i stop it?
ADVERTISEMENT
Load A 32 Bit Program Epson Perfection 1650 Scanner Disk Into 64 Bit Operating System
Aug 3, 2012how do i load a 32 bit program my epson perfection 1650 scanner disk into 64 bit operating system
View 1 Replies View RelatedBenQ Scanner Drivers For Acer 6698 Model Scanner?
Jul 7, 2012BenQ Scanner drivers for Acer 6698 model scanner for Windows 7 or Ubuntu 12.04 (Linux). Works fine in Windows XP Pro, but not in newer versions or past Ubuntu 9.x
View 2 Replies View RelatedWindows 7 Recovery Disk (usb) Won't Start
Dec 4, 2012I had a external hard drive that was no longer recognized by windows. I have an old(er) desktop without a hard drive sitting around so I plopped the corrupt drive into it (SATA2)
I have a bootable usb drive with the windows installation disk that I want to use to run chkdsk on the drive. When I start the computer I get the usual "windows loading files" with grey status bar then the "starting windows" splash screen. Then the screen goes black and I can hear the mechanical drive spinning in my case.
why I can't get the installation/recovery disk to fully load? I have tried booting without the hard drive connected and I am able to get to the windows 7 recovery console running. Boot order is set to boot from usb first
Disk Read Error On Start Up?
Jan 4, 2011I have a 1TB Seagate external drive connected to my computer. When I start the computer I get a Disk Read Error. If I disconnect the external drive, Windows 7 loads properly. Apparently, my system is trying to load Windows from the external drive.
So, how can I get my computer to ignore the external hard drive at start up and load Windows from my C drive (as it always did on my old XP machine)?
Windows 7 Will Not Start From HDD Or Boot Disk
May 22, 201101May I replaced the hard drive and re-installed W7 on the new HD. Spent a couple hrs on phone w. MS to get them to reactivate my key. Once installed and activated W7 did the updates I expected it to. But eventually, it gave me error messages on some updates, which I ignored. Over the next 3 days, things would run fine, but the "shutdown" button on the start menu would always tell me it had updates. Each time I shutdown, it would say "Installing 1 of 3 updates". I would restart the comp and get the same update indicator. Eventually I ignored it.Yesterday, 21May, I decided to restart, since it hadn't been done in awhile. It shutdown fine, but when it got to the "starting windows" screen where the colored dots fly in to make the windows logo, it froze w. the red and yellow dots in mid flight. I never saw the other dots, the logo, or anything there after.
I did a hard shutdown, tried to restart, and got a choice to run window repair (recommended) or start normal. "Start normal" freezes at the above mentioned screen w. the dots. The repair option loads files and then freezes at a black screen w. "Microsoft Corporation" and a progress indicator bar that never progresses.I eventually got the comp to boot from the W7 disc and reinstalled W7. Process was smooth, everything was running well. Or so I thought. This system has never woken up from sleep mode, so in the past, I have disabled the function. Last night, I forgot to. Woke up this morning and the comp was asleep. As usual, it would not respond so I had to do a hard shutdown. I now have the same freezing issue I described earlier. Thinking I could just reload W7 again, I booted from the disk. This time it froze at the same screen w. the red and yellow dots and wouldn't progress. It won't let me have the option of reinstalling. Thinking that it might be the HD, I put in the old HD, which I had wiped clean, and it froze at the 2 dots.I put the disc into another comp and it spun up just fine, w.o freezing, so its not the disc.
Summary: Comp freezes at the 2 dot screen on the old HD which is clean, on the new HD, from the boot disc of W7, and from a burned copy of the W7 ISO boot file. Whether I boot from the HD or the discs, I freeze at the 2 dot screen when trying to start W7 normally. When I try to repair, it freezes after loading files. It also freezes while trying to boot in safe mode and from the "last known good config." Microsoft says I probably need to update my Mobo Bios, but I don't know how to do it w.o being in W7.
Mobo: Biostar A880GU3
CPU: AMD Phenom II 965
GPU: ATI HD 5770
PSU: Corsair 750w
RAM: 4GB (2x2) DDR 3
HDD: WD 320gb
OS: Win 7 Pro 64bit
Can't Get To Start Menu To Run Restore Disk
Jan 30, 2012My internet company removed a virus along with some of my windows files now i can run my restore disk because i cant open up windows it starts to open but wont go past the windows 7 logo so i am stuck [url]...
View 2 Replies View RelatedCreated A Disk Label And Now Windows 7 Won't Start
Jun 28, 2011I have been trying to format a partition I created on my harddrive for my laptop. I booted from a disk into a program called GParted (live CD version). I used this to format the partition I created. Then, once I had finished attempting this task, my lack of expertise in computing took it's toll. I chose the option to create a disk label on the partition. I mistook this operation for something innocuous. It gave me a warning of some sort, which I ignored since I didn't think would be a problem since the recently formatted partition would be empty. This operation took a few seconds (30 or so) and once completed the drive map above said 685 GB unallocated space (or the size of my entire hard drive). I was very scared at this point so I restarted my comp and booted to hard drive and all I get is a blank screen and a mockingly blinking cursor. Now I am trying to see what my factory recovery disk can do for me. Using the windows recovery console I have attempted to repair this. Looking at the details, it runs a few tests. then sees that there is no valid partition, and tries to repair the partition. I restart and nothing has changed. Reattempting the repair just does the same thing and doesn't have any visible affect. Although it looked bad at this point there is some good news. In the recovery console I have attempted to load drivers from the other recovery disk. When the window opens to browse the disk I am able to navigate to the other drives (that I thought were gone) and it seems that all my system and personal files are still intact. I rebooted into GParted and it seems that the original hard drive is visible again and intact. However, I still can't boot!
I do have one option that is unnattractive to me. I have considered reinstalling windows to the partition I created, then once in the OS I could backup all my files to an external device, then redo everything from scratch. However, I am concerned that in the process of installing Windows 7 that I might everything for real. Maybe someone could affirm or repair my paranoia about this? However, I don't want to do this because I have been setting up this laptop for the last 2 weeks and I really don't want to spend the next 2 weeks doing it all over again (although it wouldn't be so bad if i could recover all my downloads and personal files).
Unable To Start Check Disk On Startup
Dec 13, 2011Anyways, every time I try to schedule a "Check Disk" it NEVER starts on a restart. I already did the "sfc /scannow" command on the cmd prompt. In fact it said it was UNABLE to fix some problems. I have attached a file of my "SFC scan log". Inside it says it was unable to fix "Chkdsk.exe" Go figure. Alright, just some extra information. I also think my computer is confused of itself . I mean, it seems to not know if its a 64 bit or a 86 bit! I was told to install a hotfix for "Chkdsk.exe" here [URL]. But it did NOT work. I attempted to install both 64 bit AND 86 bit hotfixes, and yes they were both windows 7 (Chkdsk.exe) hotfixes.
My system specs:
- Toshiba Qosmio X505 Laptop-
Windows 7 64bit (Yes it says 64 bit but I've tried to install other kinds of hotfixes for both 64 and 86 bits and none of them worked!)
Intel Core i5
4gb Ram
Nvidia Geforce GTS 360M
Unable To Start Up From Windows 7 Repair Disk
Dec 17, 2012When I recently tried to boot up my system all I could get is a blank screen. Tried to boot up using Windows 7 repair disk but it goes into a loop at the "starting windows" screen consequently won't boot up for me.
View 1 Replies View RelatedWindows 7 Won't Start - Disk Read Error
May 23, 2011My computer was working completely fine and I went to restart it and it wouldn't go anywhere after the boot scree just a read disk error. I restored my bios settings to default and still no luck. I then put in a windows 7 disk and went to repairs and did a start up repair got a harddrive error 0x0. When I go to look in my computer when I click browse, I can see my other hard drive, but my main one is still there but and no info. When I click on it, it asks if I want to format it. There are lot of important files I cannot lose.
View 2 Replies View RelatedWindows 7 Home Preium Disk Won't Start Up
Apr 4, 2011I'm usually verygood with installing and redoing my computer but I'm having a slight problem with my Windows 7 Home Premium Disk when I restart my computer it won't load up it will start the Windows 7 and go into my desktop.Once I try to do it the other way my computer Frezzes up.My Mother Board is ASUS M2N -MX SE Plus, ATI Radeaon Video Card, 1.00 GB in Memory, 32 Bit System, AMD Athlon Processor 4200+ 2.20GHz.I've had this computer for maybe about 3 - 4years now with no problems with it that it just needs to be redone every month or so.The Windows 7 CD itself is scratched and it's been used on two other computer's with no problem at all and now it won't work on mine, Why?
View 2 Replies View RelatedErrors After I Start Programs (corrupted Disk)?
Oct 27, 2011When I started my computer today windows was unable to full start. It got the the colorful welcome screen, and froze. I restarted and it went to chkdsk.So i ran chkdsk because it was highly recommended when I started my computer today.After a good 30 minutes it finally ended and told me a few files were unreadable and a few were deleted, scanned, etc. here is an image to help show what I mean:Afterwards, when I attempted to run Google Chrome, and a few other programs, I obtained an error message at the bottom of the screen, and when i clicked on the balloon, to hopefully get a reason or options on how to fix it, I got nothing and it popped up again, and again, and again.It is not stopping anything, it is not ending a program or closing any; it is just annoying and a little uneasing on my part of keeping this computer running.Here is an image to help express exactly what I see: how I could just turn the alert balloon off, but I would like a complete fix, not just 'duct tape'.Also, I have been getting this whenever i try to 1 uninstall a program and when I try to save an image/file:
View 4 Replies View RelatedMoving Virtual Machines To Start Of Disk?
Nov 1, 2012I have 3 Virtual Machines on my 2TB drive, but it's close to full already and most of them are right at the end of the disk, where the drive is slowest. This doesn't make for an overly enjoyable experience when in use so, if possible, I'd like to move the VMs to the start of the drive in an effort to speed them up somewhat.I've got Auslogics Disk Defrag Professional, which allows for system files to be moved to the start of the drive, but I can't see an option for moving files of my choosing.Getting another drive and copying files across isn't an option either, as I don't have one to hand.
View 6 Replies View RelatedAcer 4738g Windows 7 Start Up Disk?
Jul 6, 2011My ACER 4738g is not starting up, intially after the bios screen, the next screen is resuming windows and after its stuck with message ''setup is starting services''. Nothing is happening after that. I do have a boot CD and i tried ALT+F10 also.
View 3 Replies View RelatedComputer Does Not Start In Dynamic Hard Disk
Jul 25, 2012somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition. from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.
if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.
but system is not booting...not opening..so i cannot go to disk management. hrad disk is showing some partitions with system reserved. except system reserved all the partitions are shwoing dynamic.
and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD. reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming.
the one partition in which i installed OS previously, only in that formatting option is coming. in other partition neither formating option is coming nor extend.
Windows 7 Copied To New Disk, Does Not Start Any Longer?
Jan 17, 2013Now Windows 7 does not start from the new drive, I get "a disk read error occurred".Then I bootet from a Windows 7 rescue CD and used these commands without success:bootrec /fixmbrbootrec /fixbootI even recovered the BCD with these commands:Bcdedit /export C:BCD_BackupBootrec /rebuildbcdI have no clue what else I could do now. The partition is marked active. The Windows 7 partition is readable from within Linux, I can see everything there. I ran chkdsk from the rescue CD with no success.
View 7 Replies View RelatedDisk Defragmentation Cannot Start - Task Scheduler Not Running
May 29, 2011When I try to run Disk Defrag I get this error message, "Disk Defragmentation cannot start because the Task Scheduler service is not running. Start the Task Scheduler service and try again." How can I correct this problem?
View 2 Replies View RelatedWindows Enable To Start After I Messed Up With Disk Management
Jul 7, 2012I had Windows 7 Prof. 32 Bit version installed on C. I had two more volumes D and E.So i needed one more volume therefore i shrinked the D and took 16 GB from it and made it new volume as NTFS formatted drive M. When doing it windows showed some warning that "you wont be able to boot except from your current installation" I cant remember exactly.After that the colour changed from blue to geenish yellow.When i restarted the windows logo started and the system crashes and BSOD with STOP Error : 0x0000007b (0x80786B58, 0xC000034, 0X0000000, 0X0000000)I ran diskpart Here are the results:My all 4 partition had become dynamic and i think this is the reason that windows wont boot.
View 1 Replies View RelatedOn Blank Screen No Error Messages Won't Start From Recovery Disk
Oct 17, 2012My toshiba satellite wont start. goes straight to blank screen with flashing mouse no cursor. on blank screen no error messages wont start from recovery disk
View 7 Replies View RelatedLenovo G560 Laptop Fails To Start - Insert Windows Installation Disk And Restart
Mar 28, 2012My lenovo G560 laptop fails to start. Its showing one message. Insert your windows installation disc and restart your computer. But I don't have disc..
View 1 Replies View RelatedDynamic Disk To Basic Disk When Windows 7 Is Installed On Dynamic Disk
Mar 13, 2011so i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?
View 1 Replies View RelatedHard Disk Boot Failure Insert System Disk Press Enter
Mar 29, 2012im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
View 6 Replies View RelatedWindows 7 Disk Boot Failure Insert System Disk And Press Enter?
Jan 5, 2012windows 7 disk boot failure insert system disk and press enter
View 1 Replies View RelatedDisk Boot Failure, Insert System Disk And Press Enter?
Aug 27, 2011I woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
View 5 Replies View RelatedDoes Repair Disk Include All Software On The Computer At Time Disk Was Made
May 31, 2012After I got my new laptop, I installed antivirus, windows updates, etc, removed bloatware and installed the software that I actually use. Then I created my System Repair disk (single disk). Does this disk include all software and windows updates that were on my computer at the time I created the disk? I have read that System Repair disks will only have the factory settings of Windows 7, but I don't know if this is the case for all System Repair disks or only those that came with the computer and were made before the computer was purchased?I've also read that a System Repair disk could include a system image. Is this true and done by default when the System Repair disk is created?
View 1 Replies View RelatedDisk Boot Failure, Insert System Disk And Press Enter
Oct 13, 2010I've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
View 9 Replies View RelatedBOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER
Feb 17, 2010I have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine.
I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
Disk Boot Failure Insert System Disk And Press Enter
Jan 10, 2013My friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
View 3 Replies View RelatedUnable To Install To Disk, Turn On Disk Controller In BIOS?
Aug 14, 2012trying to install Windows 7 on sony laptop with a copy that is different from the original copy of Windows 7.did partdisk, clean all, create partition, and dvd install gave the "can't install to disk, turn on disk controller in BIOS" error. there is no disk controller function in my BIOS.if partdisk clean all was successful, does that mean the HDD and its controller board are ok, that is, not physically damaged, and the problem is with software/installation/setup etc.?what should i do next, in order to have a successful install?
View 9 Replies View RelatedHard Disk Error 'disk Structure Is Corrupted And Unreadable'
Sep 10, 2012I have IOmega 1 TB hard drive. 2 days ago, my comp restarted suddenly after which my external drive is corrupted.I get the error 'H: is not accessble' The disk structure is corrupted and unreadable.It shows up in the disk management as RAW file system,I have almost 700 GB of important documents, pictures & files that I don't want to lose.Does anybody know of any good recovery software that can help.
View 5 Replies View Related