I have 3 Virtual Machines on my 2TB drive, but it's close to full already and most of them are right at the end of the disk, where the drive is slowest. This doesn't make for an overly enjoyable experience when in use so, if possible, I'd like to move the VMs to the start of the drive in an effort to speed them up somewhat.I've got Auslogics Disk Defrag Professional, which allows for system files to be moved to the start of the drive, but I can't see an option for moving files of my choosing.Getting another drive and copying files across isn't an option either, as I don't have one to hand.
I have installed Microsoft Virtual PC in my new sony viao windows 7 computer. Then, I installed XP computer, vista computer and windows 2003 server computer in my MICROSOFT VIRTUAL PC. Now, I want to connect 3 computer in network. so that I can ping each computer with other. I also want to control things in xp and vista computers using windows 2003 computer.
I see a lot of questions on drivers and devices for Virtual machines. (Hyper-V, VMware, "XP mode", Virtual PC, etc)
Its important to understand that the devices the virtual machines see are not the actual hardware in the machine.
That is to say...the virtual machine might know that there is a network card available to use, but it doesn't know that the physical network card is a Broadcom 3c905 (for example). The virtual machine thinks that it is a pre-defined device that is written specifically for use in the virtual machine.
Same goes with other hardware, your Nvidia 9800 GTX would show up in the VM as a totally different piece of hardware. And this virtual piece of hardware does not have the features or power of the 9800 GTX nor does it require its device drivers.
Virtual machines use 2 types of devices. Emulated and Synthetic.
Emulated - Drivers/Devices that require a lot of physical box overhead to process for the virtual machine. Basically there is a lot of translation that the hypervisor (virtual pc, hyper-v, etc) must perform for the virtual device to utilize the physical device. These are the types of devices/drivers you will see used in Virtual PC and MS Virtual Server 2005 and some others.
Synthetic - Virtual Devices/Drivers that are highly optimized to perform very seamlessly with the underlying physical device. Hypervisor intervention/translation is kept minimal and therefore performance is greatly improved. Virtual machines using synthetic drivers are often said to be "enlightened". These are generally seen in bare metal hypervisors like Hyper-V and ESXi.
The important thing to take away from this post is that the actual physical devices in your computer are NOT what the virtual machine sees.
The network traffic from your virtual machine is passing through the physical network card, but the virtual machine will "see" a totally different device than what is actually in the computer. This goes for any device.
Currently I'm building a server for a client who wants to run several copies of Diablo 3 on multiple Virtual Machines.Further, they also need the ability to use a hardware unity function.
Got a new Windows 7 Enterprise 64 bit machine, found that it did not come with virtual PC. Downloaded the critical patch Windows6.1-KB958559-x64-RefreshPkg.msu and installed it. Windows Virtual PC shows up in my Start Menu. Good so far. I go through the steps to create a virtual machine and use the option to 'use an existing vhd file' and when I click 'Create' I get the above pop-up message "Cannot attach the virtual hard disk to the virtual machine. Check values and try again". A factual message but completely useless as with all error messages from Microsoft. I have tried the following:1. When I attach that vhd using Disk Management, it mounts in drive E:, I can see the files and browse the dirs in E:. In the Disk Management View, the drive shows up as 127 Gigs but 107 is unallocated space. The physical size of the vhd is only 25 Gigs2. Others in my company were able to create the virtual machine with the same vhd, checked the byte size and timing, so nothing is wrong with the vhd file itself.
3. Tried to create after shutting down all virus protection including the Micorsoft antimalware protection service. No luck4. Tried Vhd resize to resize the vhd to a smaller size (since it showed up in disk management as 127 Gigs, I thought maybe it was that size), but VHDResizer could not open the input file, gave an errors "Can only load fixed or dynamic drives"
Our office has an old program that we still need to use when upgrading our PC's to Windows 7. The program will run fine if you start a windows virtual PC and install and run it. However, based on the needs of our office, I need to be able to run Windows XP mode and simply have an icon for our users to click to take them to the application.If I install the program in windows XP mode, and then add a shortcut to the file under all users/start menu, a shortcut is placed in the appropriate place on the windows 7 machine and I can copy that shortcut ot the desktop. The program runs fine until you restart the computer. Once you restart the computer and double click the link on the windows 7 desktop to the program running in windows XP mode, it says:
Cannot start virtual application. The application is blocked from running as a virtual application.
I read some other posts saying to put a new shortcut in the all users/start menu folder. This works, but only until our users restart their computer. The next time the computer is up, the problem happens again. This is not an acceptable solution to have to create a new shortcut for each workstation each time the computer is restarted.
Right now I've got a dual boot with xp and windows 7 on an IDE disk. I want to clone my windows 7 installation to a brand new, empty (Sata) disk. If I restart the system after the cloning, will the SATA disk have a boot record? What boot options will I have? 2 former ones and a messed up 3rd one?
I have a desktop computer. It has a phenom x6 1045t, 4 gigs of ram, an hd 6870, and a 530 watt psu, running windows 7. A month ago, it was running perfectly here in my dorm room. I went on winter break and drove it home with me. It was running perfectly there, too. I have just come back to school from winter break and I cannot get it to start properly. Literally NOTHING has changed with the hardware since about 4 months ago, when I first upgraded my video card to the 6870. It is plugged into the same surge protector in the same outlet it was a month ago, when it was last here. Here's what happens when I try to start it: It goes through the initial ASUS booting screen, then onto the starting windows screen. Then, out of nowhere, my monitor says it's "going to sleep," the lights on my keyboard flash, and it restarts the booting cycle. However, if I tell it to boot into safe mode, it starts without any issues. I need some help identifying the problem here. My first thought was a power issue, but again, it worked fine a few days ago, and it was working fine in these outlets before. I was very gentle in the move, so i doubt the PSU was damaged. The fans are all spinning and the LEDs still come on. Hard drive must be fine, otherwise it wouldn't work in safe mode. Ran a memory test, RAM is fine too.
Additional info: Actually, it successfully started yesterday too, in my dorm room. I used it for about half an hour then let it hibernate, and only now am I having issues. Also, the fan on my video card was going crazy, but after I re-seated it, it calmed down. I rechecked all the wiring as well and everything seems fine.
I have a network of about 90 computers connected together and i am currently running server 2003. Now when i go to network place on my xp machine, i am able to see all of my computers that are connected together. But when i go to network place on my window 7 machine, i am only seeing some of my window 7 computers and not the xp computers. The network discovery is turned on, on all of my window 7 and still nothing.
Does Virtual box write to the disk or does it contain it within your host operating system?
I have tried to understand it but can someone pls confirm that what it does is that if your OS is windows7 then what happens is that all virtual OS you add are actually processed and executed by NTFS Windows7?
Reason I ask is b/c linux needs ext2/3/4 to work not NTFS so how can that happen?
Sony repaired this laptop (replaced Bluetooth module) and when I got it back I can no longer open Virtual Machine (XP mode). Error message attached. 7 Professional was installed as upgrade from Home premium and worked fine prior to repair.
Our office has an old program that we still need to use when upgrading our PC's to Windows 7. The program will run fine if you start a windows virtual PC and install and run it. However, based on the needs of our office, I need to be able to run Windows XP mode and simply have an icon for our users to click to take them to the application. If I install the program in windows XP mode, and then add a shortcut to the file under all users/start menu, a shortcut is placed in the appropriate place on the windows 7 machine and I can copy that shortcut ot the desktop. The program runs fine until you restart the computer. Once you restart the computer and double click the link on the windows 7 desktop to the program running in windows XP mode, it says: Cannot start virtual application. The application is blocked from running as a virtual application. I read some other posts saying to put a new shortcut in the all users/start menu folder. This works, but only until our users restart their computer. The next time the computer is up, the problem happens again. This is not an acceptable solution to have to create a new shortcut for each workstation each time the computer is restarted.
I recently downloaded and installed the necessary files to install the virtual PC on my computer. I'm running Win7 Pro, but needed XP in order to run a software program that is vital to my small business. I was able to accomplish downloading and installing the files in the order suggested. But here is where I am now: The software I'm installing for XP is old and is in 3 parts. You first install disk 1 (main program) then reboot (although it didn't tell me to reboot, that info is in my notes). then you have to install disk 2, followed by a 3rd disk that runs the hardware key. I was able to install disk 1. (or at least I believe it installed). I rebooted and could not locate my program. I went to the Virtual PC and selected WIN XP mode which said it was starting, but about 1/3 of the way thru - it stopped. I tried this several times and got the same results. I'm at a loss. Should I have enabled something somewhere that I neglected to do? I read another post that said enabling virtual computer in the BIOS. I didn't do anything with the BIOS since I'm an not very familiar with WIN7.
My system disk is about 80% filled up and I am looking to move the system files to a new disk for increased efficiency. I believe the way to go is diskcopy, creating a clone of current system disk to a new disk.smI am looking at EaseUS Disk Copy Home Edition 2.3.1 and MiniTool Drive Copy both freeware.
first time installer of an SSD here! I'm extremely excited to pop this bad boy in mainly for a faster overall boot of my computer. Recently, my friend gave me his Crucial M4 64GB SSD, which I am very thankful for. I plan mainly to put Windows 7 64-bit on it and that will be all. I was reading this guide: (SSD - Install and transfer the Operating System)
Once I opened up the command prompt, I did all the processes stated until I got to, "Clean" for whatever reason, after typing in the command a prompt came up that stated:
"Virtual Disk Service Error: Clean is not allowed on the disk containing the current boot, system, pagefile, crashdump, or hibernation volume."
So, what I'm asking is there anyway I can bypass or fix this problem so I can continue the process of putting Windows 7 on the SSD? And another question is, would it really be worth buying the $20 program that the guide offers?
I have been trying to install windows 7 but when I select the partition to install it says something like that "it has current MBR partition table ..on EFI systems windows can only be installed on GPT"While following the above instructions and using "OPTION 2" I get this error when I type "convert gpt" "Virtual disk service error"
I'm running Daemon Tools Lite, and have a conceptual problem. If I create a virtual disk, and then mount an .iso image of an OS on it, and then click on setup.exe to install the virtual OS, Windows 7 triggers a UAC warning.I don't understand why anything happening on the virtual disk would be subject to the host Windows 7's settings. It makes me fear that I'm not actually virtual, though the drive path certainly looked virtual.
I a machine with Win 7 (Utlimate) with several users (lets call them A,BC..). I have installed MS Virtual PC on it and have 3 Virtual Machines (all Win 7s - lets call them X,Y and Z).
I want to know is it possible that if User A logons on, VPC X gets fired automatically, if User B logons, VPC Z gets fired?
if there is a way to open the Command Prompt during Windows XP installation (booted from CD) and find a way to attach a Virtual Hard Disk so you could install XP on it (just like with Windows 7 and 8)?
I want to open some old files on an old external NTFS hard drive formatted in WinXP on my win7 laptop that recognises but rejects the old XP-formatted disk as an "invalid disk".
Rather than installing XP on the laptop as a dual boot along side Win7, I would like to know if I install XP-mode Virtual PC on my Win7 laptop will I be able to open my XP disk from within the XP-mode Virtual PC?
Virtual Disk Service often stops working in my notebook HP G60 125NR.the dependencies PLUG-N-PLAY and REMOTE PROCEDURE CALL are running.Without VDS, my Notebook does not recognize many USB devices and USB HArd Disk.HOW TO ENSURE THAT VDS DOES NOT STOP? Or. HOW TO RESTRART IT?
So, I have a disk with Windows 7 installed on the 3rd partition of that disk. I want to move that installation to the first partition of the disk.Repartitioning and boot settings aside, is there a way to do that? (besides using sysprep)Last time I tried that, windows would load slowly and after ''Preparing your desktop'' screen it would just show the one-color desktop, no icons, no explorer shell loaded.Alt,Ctrl,delete works, for running ''explorer'' from task manager, but computer, control panel or anything system-related does not open, instead it pops up an error window with, (e.x.)''{ED7BA470-8E54-465E-825C-99712043E01C}'' not found.
I've bought a Toshiba STOR.E D10 Zwart 1,5TB so that I can use e-SATA to connect it to my laptop. I've got a HP Probook 6555b with Windows 7 64bits. When I use the USB connection (this hard disk has both USB an eSATA) all works fine, no problem at all. When I connect it with the eSATA cable I can find the external hard disc and brwose through the files that are on it. However when I try to move files from my laptop onto the hard disk (or the other way around) after about 10 seconds it slows down and stops half way copying. Next Windows Explorer is not responding.
I am trying to upgrade my son's laptop from Vista to Windows 7. My son's computer is a Toshiba Qosmio and I ran the Toshiba Upgrade Tool with no problems. The problem I have now is that the virtual memory service is not starting so when I start the install of windows 7, I get the error "windows could not retrieve information about disks on this computer". I tried to manually start the service and get the error "service failed to start".
If I put it on automatic, it just stays on "starting". Obviously, this is not allowing windows 7 to see my disks. Disk management does not show my disks due to virtual memory service not being able to start. The computer is ready for the upgrade, just can't get passed this problem. I don't want to use the recovery disks if I can help it.
I installed MagicDisk awhile back because I was trying to mount a copy of memtest. Anyways, I ended up uninstalling MagicDisk, but the virtual cd-rom drive it created stayed behind.However, every time my computer either boots or even wakes up from sleep mode, windows automatically reinstalls the drivers and re-enables the virtual cd-rom drive. where to find the registry files I have to delete to tell my windows installation that I don't want that drive anymore?
I downloaded Oracle's VirtualBox because I wanted to test it out, but it created a 25GB virtual hard disk that I want to remove.Since I am using an SSD I have limited space (120 GB) and during the virtualbox setup I pressed cancel on the "create virtual disk" but it went ahead and did it anyways.I uninstalled virtualbox since, but the hard disk didnt remove itself along with the unistillation.
