I have downloaded the .iso file for Visual Studio Express 2010 and when I right click an hit Burn disc image there is nothing in the drop down box for Disc Burner and the status is: The disc burner wasn't found. Make sure you have the disc burner installed and you have the right permission the burn this disc.
View 3 Repliesmy question is "does my laptop have a dual-layer dvd burner?"my laptop specifications are on this link:[URL]...
View 1 Replies View RelatedI can't burn a cd,I get error message cdwriterxp.ocx.mini.burner not found. My lap top is an acer 5517
View 1 Replies View RelatedI have a HP dv9920us. A month ago I upgraded to win7 from vista. Everything was working fine until a couple of days ago when returning from work I found a black screen and an error message " no operating system found". No attention paid since I thought that my hdd went bad. So got a new one installed it but got the same message. So went into BIOS and saw that no hdd was detected. My laptop has 2 sata ports so I changed port and to my relive BIOS recognized my hdd in this 2nd port leading me to believe that the first port had gone bad. I did a clean win7 install. Everything went fine. Installed drivers etc no problem. During the first boot after and right after the post message the laptop just suddenly shut down and rebooted and then shut down again just after the post message. This loop went on for a couple of times and finally ended to a black screen with the message " no operating system found". Checked the BIOS again and the hdd was there. Booted the machine with the installation dvd in the drive this time and after the same loop for a couple of times (boot-post message- shut down- reboot ) instead of going to the no "operating system found" it continued and loaded win7. I've performed every possible test that I know for checking memory, hdd etc and everything looks good. The bottom line is that now the only way that I can use my laptop is to boot it with the installation disc in and it loads and works perfectly. If I try to boot it without the disc I end up with the "no operating system found".
View 7 Replies View RelatedI recently rebuilt a computer that had a P4 3.2 Ghz, 2 Gb ram, and windows XP. I put in an asus p5n-e sli motherboard, 6 Gb of ram, and an intel celeron E 3200 2.4 Ghz dual core. The computer is my parents, and the new parts are from my computer that I just upgraded. After I installed the new parts, windows would not start, nor would it boot to a disc to attempt repair. I put the hard drive into my computer to get the files that I needed off of it, then wiped the hard drive with it installed in my computer. I put the freshly wiped drive into the other computer in which I would receive "boot mgr not found ctrl + alt+ del to restart" I then tried to install a fresh copy of windows 7 thinking that boot mgr is part of windows. I tried to boot to the install cd, it loads the files, but then just sits at the starting windows screen and does nothing. I put the hard drive back into my computer and installed windows 7 on it from there, then put it back into the other computer. I still am getting the "boot mgr not found" message and it will not boot to windows. It still will not boot to any disc, even a windows repair disc did not work. If i put the drive into my computer, it will boot just fine
View 5 Replies View RelatedI have an Acer Aspire with Windows 7. I went to burn a dvd with Windows DVD Maker and it told me that there wasn't a dvd burner installed. What do you recommend I do?
View 3 Replies View RelatedIt is super cool.but the software does not support blu ray burning! Is there any free blu ray burner programs that are very good!
View 3 Replies View RelatedI did a fresh install of Windows 7 Ultimate 64-bit from a DVD with no problems. Once Windows 7 booted, Device Manager saw the drive and the proper model number. Says it was working properly. I could even flash the firmware. What I can't do, is eject the tray or see the disc. I can't eject manually or via Windows 7. And Windows 7 doesn't see the Windows 7 Ultimate DVD stuck inside.
I flashed the firmware w/ Vista 64-bit firmware, Vista 64-bit from the previous version, XP, Vista 32-bit...didn't matter.
So I bought a brand new Sony drive people on Newegg had zero problems with in Windows 7. Just installed it and I have the same problem!!!!
Both drives are SATA. I have 2 SATA HDDs as well. The order shouldn't matter with SATA right? Still I changed the DVD drive to be first in the chain, rather than 2nd, but that didn't help either.
I have an Acer Aspire with Windows 7. I went to burn a dvd with Windows DVD Maker and it told me that there wasn't a dvd burner installed.
View 1 Replies View RelatedThe drive will recognize a recorded disc and display and pla ythe contents. If I put in a blank disc, it will pop up the "What do you want to do" window and will start the process by allowing you to choose as USB or Data disc and will allow you to name the disc. The DVD window opens but you can not Drag and drop. Highlighting the files and clicking burn, copy and paste or send to options do not work either. The computer will just ding like it received an incorrect command. I do have a CD/DVD burning software program installed and it works to burn discs. I had not used it before today. This came installed on the system. I have not installed, deleted, downloaded or made any changes to my system. One day the disc burning function in Windows 7 worked and the next day it didn't. I ran the troubleshooter for burning discs and it said everything was fully functional. I prefer the Windows 7 option to running a separate program. I have rebooted and I also tried a rollback to a previous date. Nothing has worked.
The computer is HP and is about 1 yr old. It came with Windows 7 home premium. This is not an upgrade from a different operating system. I am very technical, but this has me stumped.
my dvd burner is not working after switching to windows 7
View 1 Replies View RelatedI was wondering if somone could help me out. My dvd r, rw was allowing me to watch movies. but now windows 7 is only recognizing it as a burn and will not allow me to play dvds. If I put a DVD in to play it, the disc ejects and windows asks me to insert a a disc into d drive.
View 5 Replies View RelatedSays "finishing" but never does. If I reboot the computer and start again its ok but I dont like wasting a blank DVD every time.
View 2 Replies View RelatedIm unsure what the problem is and have tried looking on the internet to find help but so far havent had any luck. When I try to burn a disc my laptop reads the disc fine and acts like its burning until a few minutes later when it comes up with an error message! Does anyone know how i can fix this? I have an Acer Aspire 5536 laptop and Windows 7.
View 9 Replies View RelatedHas anyone been able to get the VirtualXP environment to see a physical DVD burner as a burner, rather than just a DVD drive?
I've configured the setting to use my physical F: drive which is a LG DVD burner. However any software I have loaded into VirtualXP does not recognize this drive as a burner.
I can put a DVD in the physical drive and access it via the virtual environment. That part works just fine. But no burning capability.
I guess this would be moot if I could get Nero to install on Windows 7/64.
I purchased a LITEON DVD 8X Burner , with lightScribe technology but it did not come with any instructions on how to actually make a label using the DVD burner
View 3 Replies View RelatedI just got a Liteon DVD Burner and Player it was working fine yesterday, no problems, now the drive isn't being recognized.. what happened, The light comes on and you hear that its running but my comp says that there is no drive there.... i was watching a movie last night and was working at 1 am
View 2 Replies View RelatedI purchased an external cd dvd burner off of ebay and it is not recognized on my computer do I need to get software? I don't see a brand name anywhere on here and am trying to burn a cd.
View 2 Replies View RelatedI purchased an external cd dvd burner off of ebay and it is not recognized on my computer do I need to get software? I don't see a brand name anywhere on here and am trying to burn a cd.
View 1 Replies View Relatedsomeone has deleted burner how can i get it back?
View 2 Replies View Relatedi cant get the computer to reconize the burner it will show a green light open and close and i can hear it turning but it isnt being reconized by my computer it did work one time and hasnt done it since
View 2 Replies View RelatedDrivers for cd burner dvd/cd-rom drives?
View 1 Replies View Relatedas usual I turned off my laptop and after a while a turned on again to use my laptop but it couldn't reach operating system and showed error : " OPERATING SYSTEM NOT FOUND" !
I tried all instructions to solve the problem and finally run by windows start up CD to re-install new windows. this time I faced error: " No drivers were found. click load driver to provide a mass storage driver for installation"
My uncles laptop burner is acting like storage device. The icon on computer is a storage device icon. Every time he inserts a DVD movie it doesn't auto play, in windows media player you would usually see the DVD on the side but you see it as storage device icon which you can't play it. The only way to play it is by playing the .vob file on the DVD. I checked device manager and i found the burner is in the disk drive section which is really strange. Any ideas on how solving this?Details: Toshiba Satellite Pro L500
View 4 Replies View Relatedwell i've got a dvd burner that i can hook up to my rig via a usb port i was wondering if i can install windows via that or do i need an internal dvd burner/reader in order to install the os?
View 3 Replies View RelatedBy mistake, I purchased an Sony IDE DVD burner/writer with no cables from a discount store in Toronto. I can't return the item. I got an IDE to SATA adapter,connected everything and fired up and I get the power to the drive as I can open the DVD drawer, but the machine first gets stuck at the HP splash screen on my HP Compaq dx2300 mini tower, offering me standard options to enter the BIOS setings. If I don't do anything, machine continues to boot into Windows 7 with no further problems because secondary booting device is hard drive right after CD which is primary (as set up in BIOS by HP factory), but you can't use that brand new Sony IDE DVD burner.
How to make the machine recognize it? I set the jumper on the IDE DVD burner to MASTER, but some people on internet say you should remove the jumper completely and let the machine sort it out. Also, in control panel under 'Device Manager' it says I have IDE ATA/ATAPI channels 0 and 1 working properly. To me, it seems also like I have an IDE 40-pin connector on the motherboard.In BIOS however, all I see is 4 SATA ports although if I go into any of them, there is an option to auto-detect IDE hard drives. The only thing is that I don't need IDE hard drive detection, but IDE DVD-RW drive detection. Are there any differences between setting up IDE optical drives versus setting up IDE hard drives. Do I even have to be concerned about BIOS?
Looking for driver for LG GSA-E60L DVD-Burner for Windows 7.
View 1 Replies View RelatedSo the other day I logged on to my computer to find all my downloads gone and not reach able and the folder has a huge error something like File osociated cant be found. I have system restored to the previous today and it didnt work What do I do?
View 2 Replies View RelatedDoes anyone know how to make an eject button on the desktop for the CD Burner? My CD Burner's button is recalcitrant and I'd prefer not to have to start up my Nero to eject the disk.
View 5 Replies View RelatedOS: Windows 7 Ultimate x64
CPU: AMD Athlon 7750 x2
RAM: 4GB
GPU: Nvidia GeForce 9500gt
HDD: Seagate 1TB
I am not sure if the problem with my DVD burner is a software related one or a hardware related one. I am using HL-DT-ST DVDRAM GH22NS70 SCSI CdROM device. Of late, most of the times when I am trying to burn a disc, it shows Program Memory Area Update Failure. The errors are random. At times I can burn 2-3 discs before the error pops up. At times it happens during burning the first disc. The type of files I am burning also has no effect as the error occurred as I attempted to write various types of disc.I sed ImgBurn and Nero but the problem persisted.
When I burn a 3.5GB RAR File using Windows 7's built-in burner, it's always getting "stuck" at random parts of the process. Sometimes, it gets stuck at the middle of the process, sometimes towards the end, and etc. When it gets stuck, you will see that the rate (KB/s) will not vary and it is constant. I use a LG Hitachi GBW-T10N Bluray Combo Drive with my laptop and it has the latest firmware UN09. Why is this so?By the way, this doesn't happen when I burn using ImgBurn.
View 6 Replies View Related