Im unsure what the problem is and have tried looking on the internet to find help but so far havent had any luck. When I try to burn a disc my laptop reads the disc fine and acts like its burning until a few minutes later when it comes up with an error message! Does anyone know how i can fix this? I have an Acer Aspire 5536 laptop and Windows 7.
View 9 RepliesOS: Windows 7 Ultimate x64
CPU: AMD Athlon 7750 x2
RAM: 4GB
GPU: Nvidia GeForce 9500gt
HDD: Seagate 1TB
I am not sure if the problem with my DVD burner is a software related one or a hardware related one. I am using HL-DT-ST DVDRAM GH22NS70 SCSI CdROM device. Of late, most of the times when I am trying to burn a disc, it shows Program Memory Area Update Failure. The errors are random. At times I can burn 2-3 discs before the error pops up. At times it happens during burning the first disc. The type of files I am burning also has no effect as the error occurred as I attempted to write various types of disc.I sed ImgBurn and Nero but the problem persisted.
When I burn a 3.5GB RAR File using Windows 7's built-in burner, it's always getting "stuck" at random parts of the process. Sometimes, it gets stuck at the middle of the process, sometimes towards the end, and etc. When it gets stuck, you will see that the rate (KB/s) will not vary and it is constant. I use a LG Hitachi GBW-T10N Bluray Combo Drive with my laptop and it has the latest firmware UN09. Why is this so?By the way, this doesn't happen when I burn using ImgBurn.
View 6 Replies View Relatedmay sound daft but im stumped...Trying to install windows 7, tried installing 64 bit first, but had issues booting from disk, so tried 32 bit, which seems to load and reboot fine, howeever, it stops during install and asks "select drivers to be installed" I looked on google and found the windows 7 drivers I need for my model laptop (toshiba satellite l300d) and downloaded the zips. Problem is, I cant seem to burn them to disk, im using xp on other pc, and trying to burn with imgburn, but the files are not supported?
View 4 Replies View RelatedHow to make Windows Boot Manager Boot an ISO from your Hard Drive ?
View 0 Replies View RelatedRecently I have encountered BSOD quite regularly, whenever I'm playing pc games ( I get BSOD regardless of what I'm playing), burning an DVD ( I'm probably the only one left that still use dvd driver and buy blank dvd) or just surfing the web for more than 2 hours. Whne BSOD happens, the error is Kernel data inpage error. I had look it up and it have to do with the HDD, but I'm the only one receiving that error while trying to burn a dvd.
View 1 Replies View RelatedI'm trying to copy an audiobook cd to a blank cd. It ripped to windows media player, but when I tried to burn it to a cd-rw disk I got the message "Windows Media Player could not complete burning because the disc is not compatible with your drive. Try inserting a different kind of recordable media or use a disc that supports a write speed that is compatible with your drive." Is there a different type of disk I should be using?
View 1 Replies View RelatedI bought a Dell Inspiron 1545 laptop new in Italy in December 2009 from a major computer store. The computer came installed with Windows 7 Home Premium (Italian), and I have installed on it an original version of Microsoft Office XP 2003 Professional Edition (English). The CD-ROM unit is a Matsushita DVD+-RW UJ890.Since I bought the computer I have sometimes had difficulty burning DVDs with the built-in Windows 7 burner function that I access from Explorer. Often in the past I have ended up with partially written DVDs. Nevertheless by using high-quality DVDs I have been able to burn DVDs successfully most of the time using the Windows 7 utility. I last used the utility successfully a couple of months ago when I burned a couple of DVDs to backup some photos.
Since yesterday I have been trying to backup my most important files onto DVDs. The attempt has failed in every case. First I copy about 3 GB of files from drive C: onto drive D: in Explorer. These are several hundred files divided into three different directories, consisting mostly of PDF, Word, Excel, and JPG files, some of them with names in foreign scripts like Cyrillic, Japanese, or Chinese. Then I insert a new DVD (either Verbatim or TDK) and attempt to master the DVD by selecting the option �write to disk� from the Explorer menu (whether from the menus at the top of the screen or by right-clicking on drive D: in the lefthand pane of the screen). A window pops up asking me for the name of the disk, whether I want it to be �flash� or one-time only, and the recording speed (8x, 4x, 2x, etc.).
Once I click �continue� to start burning the DVD, a window pops up to tell me that Windows is making an image of the disk, and then the window tells me that it has begun mastering the disk, giving me a countdown of how many minutes are left (6 minutes to 11 minutes, depending on the speed I choose). But no matter what name I give to the disk and what recording speed I pick, after 30-60 seconds the popup window and the Explorer window both suddenly close and the DVD unit�s writing light goes out, but the DVD unit continues to whir at high speed forever.
Here are the results I got yesterday with 3 separate DVDs:
1. On the first DVD I used Windows 7�s burn utility on a Verbatim DVD, and I ended up with 28 files burned onto the DVD (making it unusable).
2. On the second try I used some simple burn software that I had used before � Roxio Burn � on a TDK DVD, and ended up with 4 files burned onto the disk (but from different folders than the 28 files burned by Windows 7).
3. On my third attempt, after going offline, shutting down my antivirus software (AVG), and using Task Manager to shut down processes from that other burn software, Roxio Burn, I used Windows 7�s burn utility again on a TDK DVD and ended up with the identical 28 files that had I ended up with the first time, though this time I had chosen a lower writing speed.
In all three of these attempts the DVD unit continued to whir after the windows had closed, until such time as I ejected the disk manually.When I first encountered this problem yesterday I thought the problem might be caused by my antivirus software � AVG Free Edition � interfering with the writing process, because after one particular automatic update by AVG about two months ago I began having problems with AVG blocking Skype and placing some of my Nokia cell phone software in quarantine. But by disabling the HIPS element of AVG I was able to resolve those problems several weeks ago and begin using Skype successfully again. But just to be sure, today I disinstalled AVG completely and installed Microsoft Security Essentials. Because I had read in a forum online that Windows 7 might have conflicts with other burning software that was also installed, today I also disinstalled the only burning software that I had installed � Roxio Burn � and did a cold reboot. Before attempting to burn a DVD again today, I also used Task Manager to shut down some other processes that didn�t seem necessary, such as a Nokia autolauncher and a Java autoupdate process. I also changed the time delay for Windows� sleep or power-save function to one hour.
I inserted a new TDK DVD, accepted the disk name proposed by Windows, chose for the disk to be permanent rather than flash, and chose a burning speed of 4x. After 30 seconds I received a popup window with the following message:
�ST Service Scheduling has stopped working.�I ignored this message and did nothing, because often in the past when I have succeeded in burning DVDs with Windows 7's utility I have had this message appear, but if I do nothing I almost always have the burn proceed successfully. In this case, though, after another 10-20 seconds the Explorer window and burning-countdown window both closed, the DVD light went out, but the DVD continued whirring at high velocity. The DVD unit did not respond to my pushing the expel button by hand, and when I tried to expel the DVD using Explorer I only got an error message, so the DVD could be expelled only by shutting down the computer.When I turned the computer back on, I discovered that no files at all had been written to this DVD.below are the details from the ST Service Scheduling error message (in Italian, sorry). Whenever I get these ST Service Scheduling error messages I get them twice, i.e., after choosing �Close� one time the same message immediately appears again and I have to choose �Close� a second time.
Nome evento problema:APPCRASH
Nome applicazione:STService.exe
Versione applicazione:1.0.0.64
Timestamp applicazione:4ae02c43
[code]....
I can burn a normal audio cd, yet i can not get it to burn mp3's (data cd, also says for mp3's in software) i have tried a few burning programs and always get the same result. so i figure its a windows 7 issue.
View 3 Replies View RelatedI have an Acer Aspire with Windows 7. I went to burn a dvd with Windows DVD Maker and it told me that there wasn't a dvd burner installed. What do you recommend I do?
View 3 Replies View RelatedIt is super cool.but the software does not support blu ray burning! Is there any free blu ray burner programs that are very good!
View 3 Replies View RelatedI did a fresh install of Windows 7 Ultimate 64-bit from a DVD with no problems. Once Windows 7 booted, Device Manager saw the drive and the proper model number. Says it was working properly. I could even flash the firmware. What I can't do, is eject the tray or see the disc. I can't eject manually or via Windows 7. And Windows 7 doesn't see the Windows 7 Ultimate DVD stuck inside.
I flashed the firmware w/ Vista 64-bit firmware, Vista 64-bit from the previous version, XP, Vista 32-bit...didn't matter.
So I bought a brand new Sony drive people on Newegg had zero problems with in Windows 7. Just installed it and I have the same problem!!!!
Both drives are SATA. I have 2 SATA HDDs as well. The order shouldn't matter with SATA right? Still I changed the DVD drive to be first in the chain, rather than 2nd, but that didn't help either.
I have an Acer Aspire with Windows 7. I went to burn a dvd with Windows DVD Maker and it told me that there wasn't a dvd burner installed.
View 1 Replies View RelatedThe drive will recognize a recorded disc and display and pla ythe contents. If I put in a blank disc, it will pop up the "What do you want to do" window and will start the process by allowing you to choose as USB or Data disc and will allow you to name the disc. The DVD window opens but you can not Drag and drop. Highlighting the files and clicking burn, copy and paste or send to options do not work either. The computer will just ding like it received an incorrect command. I do have a CD/DVD burning software program installed and it works to burn discs. I had not used it before today. This came installed on the system. I have not installed, deleted, downloaded or made any changes to my system. One day the disc burning function in Windows 7 worked and the next day it didn't. I ran the troubleshooter for burning discs and it said everything was fully functional. I prefer the Windows 7 option to running a separate program. I have rebooted and I also tried a rollback to a previous date. Nothing has worked.
The computer is HP and is about 1 yr old. It came with Windows 7 home premium. This is not an upgrade from a different operating system. I am very technical, but this has me stumped.
my dvd burner is not working after switching to windows 7
View 1 Replies View RelatedI was wondering if somone could help me out. My dvd r, rw was allowing me to watch movies. but now windows 7 is only recognizing it as a burn and will not allow me to play dvds. If I put a DVD in to play it, the disc ejects and windows asks me to insert a a disc into d drive.
View 5 Replies View RelatedI have downloaded the .iso file for Visual Studio Express 2010 and when I right click an hit Burn disc image there is nothing in the drop down box for Disc Burner and the status is: The disc burner wasn't found. Make sure you have the disc burner installed and you have the right permission the burn this disc.
View 3 Replies View RelatedSays "finishing" but never does. If I reboot the computer and start again its ok but I dont like wasting a blank DVD every time.
View 2 Replies View RelatedHas anyone been able to get the VirtualXP environment to see a physical DVD burner as a burner, rather than just a DVD drive?
I've configured the setting to use my physical F: drive which is a LG DVD burner. However any software I have loaded into VirtualXP does not recognize this drive as a burner.
I can put a DVD in the physical drive and access it via the virtual environment. That part works just fine. But no burning capability.
I guess this would be moot if I could get Nero to install on Windows 7/64.
I purchased a LITEON DVD 8X Burner , with lightScribe technology but it did not come with any instructions on how to actually make a label using the DVD burner
View 3 Replies View RelatedI just got a Liteon DVD Burner and Player it was working fine yesterday, no problems, now the drive isn't being recognized.. what happened, The light comes on and you hear that its running but my comp says that there is no drive there.... i was watching a movie last night and was working at 1 am
View 2 Replies View RelatedI purchased an external cd dvd burner off of ebay and it is not recognized on my computer do I need to get software? I don't see a brand name anywhere on here and am trying to burn a cd.
View 2 Replies View RelatedI purchased an external cd dvd burner off of ebay and it is not recognized on my computer do I need to get software? I don't see a brand name anywhere on here and am trying to burn a cd.
View 1 Replies View Relatedsomeone has deleted burner how can i get it back?
View 2 Replies View Relatedi cant get the computer to reconize the burner it will show a green light open and close and i can hear it turning but it isnt being reconized by my computer it did work one time and hasnt done it since
View 2 Replies View RelatedDrivers for cd burner dvd/cd-rom drives?
View 1 Replies View Relatedmy question is "does my laptop have a dual-layer dvd burner?"my laptop specifications are on this link:[URL]...
View 1 Replies View RelatedMy uncles laptop burner is acting like storage device. The icon on computer is a storage device icon. Every time he inserts a DVD movie it doesn't auto play, in windows media player you would usually see the DVD on the side but you see it as storage device icon which you can't play it. The only way to play it is by playing the .vob file on the DVD. I checked device manager and i found the burner is in the disk drive section which is really strange. Any ideas on how solving this?Details: Toshiba Satellite Pro L500
View 4 Replies View Relatedwell i've got a dvd burner that i can hook up to my rig via a usb port i was wondering if i can install windows via that or do i need an internal dvd burner/reader in order to install the os?
View 3 Replies View RelatedBy mistake, I purchased an Sony IDE DVD burner/writer with no cables from a discount store in Toronto. I can't return the item. I got an IDE to SATA adapter,connected everything and fired up and I get the power to the drive as I can open the DVD drawer, but the machine first gets stuck at the HP splash screen on my HP Compaq dx2300 mini tower, offering me standard options to enter the BIOS setings. If I don't do anything, machine continues to boot into Windows 7 with no further problems because secondary booting device is hard drive right after CD which is primary (as set up in BIOS by HP factory), but you can't use that brand new Sony IDE DVD burner.
How to make the machine recognize it? I set the jumper on the IDE DVD burner to MASTER, but some people on internet say you should remove the jumper completely and let the machine sort it out. Also, in control panel under 'Device Manager' it says I have IDE ATA/ATAPI channels 0 and 1 working properly. To me, it seems also like I have an IDE 40-pin connector on the motherboard.In BIOS however, all I see is 4 SATA ports although if I go into any of them, there is an option to auto-detect IDE hard drives. The only thing is that I don't need IDE hard drive detection, but IDE DVD-RW drive detection. Are there any differences between setting up IDE optical drives versus setting up IDE hard drives. Do I even have to be concerned about BIOS?
Looking for driver for LG GSA-E60L DVD-Burner for Windows 7.
View 1 Replies View Related