Disable Print Service From Logging An Error Message?
Dec 5, 2011
I ran across away to disable SChannel from logging an error message in event viewerI there a way to get PrintService to do the same? Everytime I print I get an error in event viewerThe document Microsoft Word - 2012-2, owned by XXX, failed to print on printer HP LaserJet 1020. Try to print the document again, or restart the print spooler.the printer prints fine and I am tried of getting these and if I can can just disable this from logging then I want to do it. Below is how to do it for SChannel, does anyone know how to do it for PrintService? I searched the registry for PrintService and nothing showed up.[CODE]
In an attempt to log on to Windows 7, I could not get to the desktop and the error message: "Failed to connect to a windows service. Windows could not connect to the System Event Notification Service." It also, said, "Location is not available: C:Windowssystem32configsystemprofiledesktop." I ran system restore and was able to get the desk top screen, however, nothing responded and in an attempt to shut down, I had to hit control/alt/del which now has me stuck in Logging off.....
Windows 7 ultimate (legal) version : 6.1.7601 Service Pack 1 build 7601 x64 Proc : Intel core i7 CPU 970 @3.2 GHz, 3201 Mhz, ram: 24GB
So the problems I used to have was when as soon as I logged on to skype or pressed print screen, the entire computer would freeze and there was nothing else I could do exept for a hard reset. When looking for a solution online I found a command for cmd prompt which disabled some debugging; ( even though I have absolutely no idea what this does, I always feel like shutting down parts of windows is not such a good idea)
bcdedit -debug off
I used this command rebooted and to my relief i was able to take screen shots without freezing my entire PC. Unfortunately when I run skype now and log in, my computer freezes and gets a BSOD : 0x00000101, Something about a time signal from a co-processor which wasn't received on time.
I am really curious how to disable Windows logging. I was reading something on Wikipedia about privacy and security; and came across something interesting that I cannot find much about on Google. It stated that "many programs and operating systems are set up to perform data logging of usage". For example, this might be recording the times when the computer was in use, or some applications we use on Windows. Whoever wrote the article stated that its possible to disable Windows logging - but my question is - is it?
I am running Windows 7 Ultimate x64, and have been for years. I have had no problems previously that I was unable to fix.
This morning when starting up my pc I got the error message "Failed to connect to a windows service" In addition it has defaulted to windows classic theme and I can not re enable Aero.
I looked at the Event log but it is simply beyond my level of understanding how to address the errors. Also all errors shown seem to be relativity longstanding/ recurring.
New computer build with fresh install of Windows 7 (64) on formatted hard drive. I have no printers installed and am allowing window to download all updates. I can't install any printers as windows print spooler service is not loaded. If I go to services, and attempt to start the service, I get an error message that says "Windows could not start the Print spooler service on Local Computer" "Error 1053; The service did not respond to the start or control request in a timely fashion".
All dependant services are loaded and running. I have restored the computer to an earlier point and was able to determine the spooler services are running. I continue to allow updates and at some point the service becomes corrupted again. I check in services.msc after every restart. I can't seem to figure out what's corrupting the spooler service. I've even gone as far as to re-install a system image created just after all motherboard divers where installed. The service appears to be working fine and during the process of doing Windows updates,after a random restart, it's not working again. Once it stops working it never comes back until I do a system restore.
I have recently adquired a new Dell laptop with Core 2 processor and Windows 7 Home Edition (64 bits) installed from factory. I have this problem: I can not add any printer to the system, because when I try to do it the following message: "Windows can not open Add printer. The local print spooler service is not running. Restart the administrator or the system". Trying to being smart and not to bother you guys with an already known way to solve the problem I have search a lot of forum in where I found a lot of persons with the exactly same problem. The solutions that other persons gave to the problem does NOT work in my case. I mention here the principal ones: Use "Fix it" tool from Microsoft, Does not work, the tool can not restart the printer spooler service. Go to the Control Panel -> Services ( or, equivalent, Execute: service.msc) and check that Spooler Service is running, if it is not: make it start and check Automatically?
How do i disable the feature that says Print cartridges are not compatible on a HP Photosmart C309G Printer. The cartridges fit in the printer but do not have 4 copper contacts on the bottom. That may be the reason they won't work.
I use W7 + SP1. I tried to update my Apli Master 6 program but for some reason it did not install properly. I tried to uninstall the partly installed program but this failed to happen. Now, I keep getting a pop-up notice from the ISD with a 'runtime error' message. I tried to stop the ISD by going to C/Control Panel/Admin Tools/Services/ Interactive Services Detector and stopping it. However it keeps reappearing with the same message, and will not stay "Stopped." How can I disable it completely?
Is it possible to print just a selection from a Live Mail message? I have highlighted a section, but print options don't allow for Selection to be checked (actually, it is a radio button, but is dimmed).On printing, of course, the entire e-mail message prints with headers and footers, and this is not what I want. I am getting tired of copying and pasting into Word to get a printout.
I just installed Windows 7 on a brand new DIY build. It works great except EVERYTIME I start up the computer I get a small window in the middle of the screen that has this at the top: Msg, and a sentence in the window that reads "Your version is the latest version." I then press "OK" and it disappears.How do I get this to quit appearing on start up?"
I am not sure if this problem is due to networking or security issue so just posted in this General discussion section.
These 2 days my Windows 7 Build 7232 got a problem that there is an alert message to show "I/O Error 103" when logged into Windows. I check in TECHNET support site and know it was due to "Cannot connect to the registry on site server X in site Y.".
The iso file of the Build 7232 was scanned with Kaspersky and found without malware nor virus.
I just bought a new Dell laptop 6 weeks ago. The laptop is running Windows 7 Home Premium 64bit, Original Install, OEM.
About two weeks after purchasing the laptop Windows startup recovery would run every time I turned on the laptop. Just a few days ago the I started getting the BSOD after logging in to the desktop. If I try to start an application immediately after logging in, I won't get a BSOD. If I log in and leave the latptop unattended I get a BSOD.
I am having difficulty with drivers on my Acer Aspire 5253 system using Win 7. It is a couple months old. Within the last month, I have been getting random blue screen of death error messages in which the computer shuts down to prevent damage. The computer boots up fine without any problems. The blue screen that I see contains the same information each time.
I have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
Is there a registry setting or option to turn off the message "other users are logged on" you get when you try to turn off or restart/ Windows 7, vista, xp etc? Whats a "quite command"?I guess I'm looking for no warning even if other users are logged on and multi RDP.Also where are the settings to turn on or off the various windows warning messages and notices? (I'm NOT referring to the "action center" messages).I'm doing a lot of virtual testing and multi RDP etc.Also how do you go through 2 subnets, where one is a virtual VMWare subnet Real PC -> Physical router (ADSL Modem Internet gateway) 1 -> Physical sub router 2 -> VMware subnet router -> VMWare workstation.
I have disabled the search indexing service, & would like to know is it possible to disable the message bar that pops up every time I use advanced search."Your searches might be slow because the index is not running. Click to turn on the index.
I have Windows 7, Live Mail. Mail with attachments come in with no problems, like photo attachments, but my mail will not go out with photos attached. They are not huge files. I get an error message "error/tasks" but then that screen freezes.
Before my computer was working fine when i am connecting to the internet using a portable usb internet huawei. Then one morning when i tried to connect i got this "Error: 720".
This is a new laptop, Windows 7 Home Premium 64 bit, and I have installed drivers for both my HP Laserjet CP1215 and Canon MP150, Whenever I try and print a document, from WordPad, Adobe Reader, Word, whatever, it just appears in the print queue with the Status as "Error - Printing".If I run the HP diagnostics utility, it can print test pages, no problem. So the USB connection and actual printer are fine. They also work fine with other PCs. I've checked the print spooler is up and running in "Services"
Attached is a screen shot of the error im getting when trying to print via IE9. It does NOT do this in any other program such as outlook, acrobat etc.-I have read and executed many of the fixes that Microsoft provides to no avail. -Re-installed IE9 did not work either.-Reset IE options-Disabled script alerts within IEALSO- It will not allow me to save a HTML file. "Save page as"....It seems as if this is a common problem but I have not found a common solution.
I bought a new laptop with Windows 7 Home Premium 64bit a couple of months ago and havent been able to print anything at all. The printers that i have are HP Officejet K7100, HP Deskjet 960c. Both printers are recognized and the status on the control panel is all good, until i actually print something, thats when the spooler seems to begin the print job but it just ends up saying theres an error and no page is actually printed.
At work we installed 2 new desktop computers in a network with windows 7 so we had to update our Canon IR 2200 driver to make the printer work properly.
Sometimes when we want to print files the machine is printing nonsense (zdingbats on the upper side of the paper but only a few lines not the whole page) and we have to cancel the printing task on the printer because apparently once it starts it won't stop.
On the screen of the printer in the journal there is written: document name: parallel port print job (instead of microsoft word, excel, ...) username: / (instead of the name of our network)
bug in the driver or is there something wrong with the connexion?
I just tried to print, only to find out the printing menu from MS word wasn't opening. I checked the print spooler service, and it's stopped. When I try to start it, I get the error 1503 message.
I've tried the following:
- Manually start it. Made sure the RPC service is running (yes it is) - System restore to a date I believe it worked - sfc /scannow (doesn't find anything) - some other cmd command which had "= rpcss" in it - Some said .NET update may do something, didn't
I saw something else about renaming .mui to .exe and the original spooler .exe to .bak. Tried that and the service just reported it couldn't find the files, so I reverted that.I can't recall off the top of my head what the files names specifically are, but the two files that are the spooler (spoolersv.exe and spoolersv.exe.mui?) are within the correct directory in Windows. I really am at a lost, and classes started this week for me so I'm drained right now... its tunneling engine service would do the same thing (error 1503 out of nowhere), so I had to reinstall that and add something in its registry directory. Easier using that for Sven Coop and Synergy Coop?
