Deferred Procedure Calls And Interrupt Service Routines High CPU

Dec 1, 2011

Recently I have noticed higher than normal CPU usage from my laptop which I know will reduce battery life, cause higher temperatures and slow the computers performance.The task manager did not tell me too much so I decided to have a look in the Resource Manager.Sure enough under the CPU tab of the Resource Manager there is a process called System Interrupts that has a description of "Deferred Procedure Calls and Interrupt Service Routines" with a average CPU usage of about 30%.I did notice that when I first turn my laptop on and boot in to Windows that this process uses about 1 - 5 % CPU usage and my temperatures stay at about 28 - 32 degrees Celsius.Usually after some time of using the laptop I notice this temprature rises to about 48 - 54 degrees Celsius and when I check the process it is using around 30% CPU usage, usually to resolve this I restart my laptop and everything goes back to normal and the process is back down to 1 - 5 % CPU usage.I done a little research online and found that clean boot of Windows may solve the problem, I did this then re-installed all the required drivers from my system manufacturer, installed Avast Antivirus Pro then done a Windows Update.

View 1 Replies


ADVERTISEMENT

Higher CPU Usage Due To Deferred Procedure Calls (DPC)

Feb 10, 2010

Running Windows 7 64-bit and just downloaded the lastest updates from Microsoft last night. Now my CPU is sitting at 20% due to Deferred Procedure Calls and Interupt Service Providers running constantly according to the resource monitor. What could cause this issue? Could it be a driver that downloaded from MS? I believe the fix for this would be to just restore back to before the install but I have a question about restore points. When I open up the restore point menu and it shows all the dates, do I pick the date of the MS update or one day earlier?

View 7 Replies View Related

High DPC With POWER Service

May 31, 2011

I have high DPCs when the POWER service is running. If I turn it off, the DPCs go back to normal. Why? What is this trying to run that is causing this?

View 1 Replies View Related

High DPCs With POWER Service Running?

May 31, 2011

I have high DPCs when the POWER service is running. If I turn it off, the DPCs go back to normal. Why? What is this trying to run that is causing this?OK, U can't tell. How can I troubleshoot this now that I know the culprit?

View 3 Replies View Related

High DPCs With Power Service Running

May 31, 2011

I have high DPCs when the POWER service is running. If I turn it off, the DPCs go back to normal. Why? What is this trying to run that is causing this? Windows 7 ultimate x64.

View 1 Replies View Related

To Retract The Incoming Calls

Oct 29, 2012

Im trying to retract the last incoming calls to my cell#(314)914-1356 from about 2pm. till present time

View 2 Replies View Related

Right Click Calls For Installer Of Acrobat?

Jul 29, 2010

Each time I right click, in say explore or search type program..like everything for example, my computer tries to configure/install acrobat. I guess there is something left over somewhere from maybe windows installer or even adobe installer.

View 6 Replies View Related

Software To Make Telephone Calls

Dec 6, 2009

I have a fax modem pci card that I use to send the occasional fax. Is there telephone software somewhere in 7 that would enable me to use the card to make telephone calls through the pc and use the pc as an answering machine ?

View 2 Replies View Related

Make And Receive Telephone Calls Via Voice Modem?

Oct 22, 2011

All I want to do is make and receive land line phone calls on my pc. NOT VOIP. Using a USB headset and USB voice modem. Please can you tell me the specification I need for the modem and suitable software to make it all work?

View 4 Replies View Related

A Clock Interrupt Was Not Received On A Second Processor

Apr 29, 2011

ive been getting these BSOD'S quite frequently i think i may need a new cpu or ram?

View 9 Replies View Related

Telephone Wall Jacks Will Interrupt

Apr 13, 2012

I was wondering if anyone can help me with this issue. My computer has been receiving the Blue Screen for quite a while and this is the error message that comes up with error.

View 3 Replies View Related

Clock Interrupt Was Not Received On Secondary Processor

Nov 2, 2011

Where my BSOD's were not often at all.However these other days in the week, they've been happening every 2-3 days. But that has also dissapeared. Now i BSOD really often, when ever the computer feels like it.This started happening as i said 2 weeks ago when i changed my Motherboard and Processor. Because my old one was a AMD 5200+ Dualcore on a M2N-E Asus AM2.They both died at the same time. So i got myself a ASRock N68-S UCC.But do note that the first four to five days this didnt happen.Everything was fine after changing my hardware. So .. Ive read my minidumps with "whocrashed" and it indicates it is most likely a driver/ software problem and NOT hardware.Yes indeed this is a wall of text, but as a gamer i cannot proceed to enjoy my hobby with a BSOD constantly popping up.My usual temperatures for the CPU are about 35C at idle and 40C - 50C Ingame. Same goes with GPU and just about everything else.I am running on the latest drivers for all of my components, ive tried rolling back to see if the BSOD's dissapear but nope.So im guessing it's not those.I compressed the minidump into a rar file and uploaded it. There is a file also called "Additional info" make sure to read it!It contains important information gathered by "whocrashed".

View 9 Replies View Related

A Clock Interrupt Was Not Received On A Secondary Processor

Dec 21, 2009

I'm on windows 7 x64 bit and ive suddenly been getting this error messege alot. Everytime i play TF2, within like 10 minutes of starting the computer BSODs and give me the error messege "a clock interrupt was not received on a secondary processor" its happened like 5 times so its not a fluke. The latest hardware changes i have done:3 weeks ago: bought a pci GPU to run a third monitor and replaced a wireless G adapter with a wireless N adapter 1 week ago: went back to my wireless G adapter because the wireless N adapter SUCKED (who set of headaches...)I only started getting this error messege about 3 days ago. Ive read some forums and people have been saying that it could be a core on the CPU going bad. I'm thinking about replacing my cpu soon, but i dont want to do it then still get the same error messege.

View 4 Replies View Related

Bsod, Clock Interrupt Not Received On Secondary Processor + 1 Other?

Feb 26, 2012

am getting 2 bsod on computer after installing a printer? was working without flaw up until then. first (and most persistent) is the one on the subject line and the other is "problem has been detected and windows has been shut down to prevent damage"I've attached photos of both with appropriate minidumps for anyone who would like to give this a shot. I already uninstalled any drivers associated with the printer. I had a video card radeon hd 4670 that I uninstalled and actually got to go 4 hours without a reboot, but it happened anyway. I have bitdefender total home security running, but I have for the better part of a year without any trouble.

View 1 Replies View Related

BSOD Only While Playing Games (clock Interrupt Not Received)?

Jul 23, 2012

So i've been getting very regular blue screens only while playing games, and I thought it was about time to try and fix this as it has been happeneing nearly every 10-15 minutes after playing. (specifically the games played are bf3, arma 2, guild wars 2 and counterstrike global offensive). The error I get on the blue screen is "A clock interrupt was not received on a secondary processor within the allocated time interval" and it's the exact same message every time. Sometimes my computer will lock up and play a horrible sounding noise (sounds a bit like "errrrrrrrttttt") it will mostly BSOD shortly after but sometimes it even comes back. I downloaded blue screen viewer and it seems from there that a driver called "ntoskrnl.exe" is the main culprit, however some other drivers are showing up as the cause, this one (ntoskrnl.exe) seems to be the main one causing it. I've attched the mini dump files for the last 5 blue screens.[CODE]

View 9 Replies View Related

Clock Interrupt Was Not Received On A Secondary Processor Within The Allocated?

May 29, 2012

clock interrupt was not received on a secondary processor within the allocated?

View 2 Replies View Related

BSOD Playing World Of Warcraft Clock Interrupt Was Not Received?

Feb 21, 2012

So a few days ago this problem started when playing just WoW, My computer would randomly lock up for 5-10 seconds at a time, during this period the sound would loop and the entire computer would lock up. The problem got worse and worse to where most of the time it happens now i have to do a hard reset of my system. It is still isolated to WoW most of the time however i have started getting short lock ups when playing other games, never lasting more than a couple seconds in those.Not sure why this problem just started but here are a few facts:Since it started i have updated my BIOS as well as my Graphics drivers, ive checked for virus and also done a system restore. attached is my JCGRIFF2 File and below is my DXDIAG.[CODE]

View 5 Replies View Related

Clock Interrupt Not Received On Secondary Processor Within Allocated Timeframe?

Oct 17, 2010

I have done a quick search around here to see if I could locate this problem so as not to replicate it but couldn't find anything so I'll fire away.I recently bought Windows 7 Pro 64-bit upgrade, I'm currently running XP Pro 32-bit. I ran into some problems during setup, most of which I managed to fix, but the latest one has me stumped.Basically when the setup reaches the 'expanding Windows files' part of the setup I get a BSOD which reads: Clock interrupt not received on secondary processor within allocated timeframe.[CODE]I suppose I can safely assume that the problem is hardware related, but exactly what is beyond me. I was wondering if it could be to do with the memory not being paired? I have recently replaced my hard drive with a new one as my last XP installation's registry became corrupt beyond the point of salvaging.

View 9 Replies View Related

Windows 7 Sp1 High Cpu Usage (35%) High System Interupts

Mar 22, 2011

I just installed windows 7 ultimate sp1 - Like the title says I'm seeing 35% cpu usage with nothing going on. I googled around and ran traces to see which driver it was, turned out the ahci driver was doing it. The USB driver showed similarly high latency but that can be delt with later. Most forums recommend upgrading your drivers but this problem has stayed constant both with microsoft's stock drivers for everything and after running windows built in search for drivers even after I manually grabbed the latest drivers for everything. url...BIOS is up to date4 GB RAM - Corsair something or otherEVGA Geforce 8800 GT450W psu1 DVD burner (sata)5 hard drives (sata) plugged into all but the first sata port because that caused nothing but headaches for me. Update - switching from AHCI to IDE in BIOS fixed the problem.

View 3 Replies View Related

Re-installing Windows 7 Procedure

Jan 19, 2013

I am thinking of re installing window 7 onto my laptop, which currently is on window 7, but of a different language. I would like to install an english version of window 7.

View 10 Replies View Related

Simplify The Email Addressing Procedure In WLM?

Jan 17, 2012

When addressing an email, I begin by clicking on "to". Then the list of contacts appears and I have to click on the contact's name, select from "to/Cc/Bcc" and then click on the 'okay'. This seems to me to be a rather laborious procedure. Is there a way to modify WLM to simplify the addressing procedure. For example, after selecting (to/cc/bcc), a single click on the contact adds the addressee without having to move the cursor over to the far end to hit "OK"?

View 5 Replies View Related

Whats The Procedure For Swapping Gfx Cards ?

Feb 13, 2009

I'm getting an eVGA e-GeForce GTX 285 soon, and I currently have a BFG GeForce 8800 GTX in my system. I usually uninstall the graphics driver I have installed, and then swap the card and install it's new driver. Is there any other "better" way, or is that pretty much the standard procedure?

Is a registry sweep recommended to get rid of any remaining driver components? Do you recommend any programs to do this?

View 3 Replies View Related

Driver's Uninstall Procedure Crashes?

Apr 18, 2012

I'm having major trouble with my audio card driver (M-Audio Delta) so I wanted to uninstall it. I went to "Programs and Features" and click uninstall. It immediately gave me this error:[CODE]

View 1 Replies View Related

Procedure To Install Webcam In Windows 7

Jul 27, 2011

I WOULD LIKE TO ASK YOU THE PROCEDURES TO FOLLOW FOR INSTALLING THE WEBCAM IN MY COMPUTER

View 1 Replies View Related

Remote Procedure Call Failed And Did Not Execute

Aug 23, 2011

When I insert USB Drive, the folder just load but its not opening at all, plus all the icon was gone. I have done scans for both malware and antivirus but none found. The only solution for this is when I remove the drive and restart the pc. I also experience this when sorting items without the usb inserted. After this problem I often get "The remote procedure call failed and did not execute." Which restart is the only option.

View 3 Replies View Related

Installing Software On Windows 7 - Specified Procedure Could Not Be Found

Dec 2, 2010

I've a problem to install any software on windows 7. I cant even install games which is compatible with wins 7. This message will appear when I want to run/install a software. "The specified procedure could not be found".

View 11 Replies View Related

Installation Procedure Of Asp In Dell Vostro With Windows 7?

May 4, 2012

sir i wan to know the installation procedure of asp in dell vostro with windows7

View 1 Replies View Related

The Procedure Entry Point Could Not Be Found (Malware/Virus)

Apr 2, 2012

Since about a couple weeks ago my computer has been working fine. Then when i woke up on March 25, the minute my computer started i received an error message. I thought everything was alright but when i went to open my browser i received the message " The procedure entry point _except_handler4_common could not be located in the dynamic link library msvcrt.dll." and "The procedure entry point _ftol2could not be located in the dynamic link library msvcrt.dll.". Everytime i try opening a programs like Photoshop,Word, Malwarebytes and ESET... it gives me that message(I tried dowloading and running rkill with different names but the message also popped up). Strangly I can still open SuperAntiSpyware and open games like Chess. I have tried running Microsoft Security Esssentials with no results. I have tried running SuperAntiSpyware in all modes (including the rescue scan) and it said that everything is clean. When i clicked on something that was only avaliable to the paid version my internet browser(Internet Explorer) popped up(So i think its like the Security scam that does not let you use programs).

View 14 Replies View Related

Reinstalling Operating System - What Is Proper Procedure With Dropbox

Feb 10, 2012

My computer had a bit of a melt down and now I think it best just to start from scratch. I am going to re-install the O/S on my Toshiba Satellite L500-19x.I use Dropbox quite a bit. Do you know the 'proper' way I should handle the process in regards to Dropbox? Will others lose access to my 'shared' folders when I do this?

View 3 Replies View Related

Error : The Remote Procedure Call Failed And Did Not Execute

May 28, 2012

I keep getting the The Remote Procedure Call Failed and did not execute error when opening my control panel or windows explorer on Windows 7.I've made sure the RPC is on and that the second service is on manual so that isn't the problem.

View 1 Replies View Related

When I Start The Computer Up It Says "the User Profile Service Service Failed The Login?

Oct 6, 2011

I have a Dell XPS M1730 with Windows 7 Ultimate and it was doing an iTunes update and the lid got closed during the update process. Now when I start the computer up it says "the user profile service service failed the login, user profile cannot be loaded". The computer starts up in safe mode and won't let me do a system restore because it says it is shut off.When I look at User Profiles in Windows 7, it states that the users profile is as backup and the default profile is the local profile. How can I fix my computer to get my user profile back up and working?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved