Corrupt User Profile When Removing And Adding Computer To Domain?
Nov 23, 2011
We have removed a computer from the domain because of some network issues.When we logged in to the computer as a local administrator we've noticed that the user folder of the domain user who was previously logged to that computer was almost empty(except for the appdata folder).When we joined the pc back in the domain the computer made a new profile.Unfortunaly the user did save some documents on his dekstop in the old profile.
I'm trying to run a script at the end of sysprep that will add a Domain group to the local Admins group. I found a few scripts while searching around, but none will work for my application.
This is what I have so far.
Code :SET objNet = CREATEOBJECT("WScript.Network" )' Set the user you want to make local administrator herestrUser = "<username here>"strNetBIOSDomain = objNet.UserDomainstrComputer = objNet.ComputerNameSET objGroup = GETOBJECT("WinNT://" & strComputer & "/Administrators,group" )SET objUser = GETOBJECT("WinNT://" & strNetBIOSDomain & "/" & strUser & ",user" )' ignore error if user is already a member of the groupON ERROR RESUME NEXTobjGroup.Add(objUser.ADsPath)ON ERROR GOTO 0
The problem I'm having is that I need to be able to provide a username and password of a domain admin so that it can authenticate. how to do this when I try to add the user.
I have the same issue the other user mentions. I can log on as a domain admin, but not as a domain user. There are only 4 profiles in the registry, with no .bak extensions:
1 is the default user 2 is the localservice account 3 is the networkservice account 4 is the local "Administrator" account
I was assuming the problem was with the default user, so I followed the article previously mentioned, and changed the RefCount from "1" to "0", and the State was already set to "0". I am still unable to log in with any domain account except for domain administrators.
I had a domain on my computer that was restricting me from changing passwords etc on my computer. I removed my computer from the domain but now i have seemed to have lost all the data that was on my computer, inc music and important documents.Can anyone help me recover these?
actually i put a server,and to create one system as a domain member , that was not installed properly that why i delete this active directory and reinstall and to make a domain members except that system
My computer after I type in my password to log in says that my user profile cant be updated. I can access it in safe mode which I am currently on. I have already installed malware bytes and run it in addition to combo fix. Maybe I did something wrong while using either of those programs and they did work correctly but nothing has changed.
I'm a software developer at a small shop and we're exploring the idea of having a bare bones Linux box or something else with lots or RAM and CPU to run VMWare and Windows 7 VM to host our development environment. We are often installing new components for our development tools and other trial software and the like to research new technologies. Ultimately our machine is so bogged down after 6 months or so that a reformat is necessary. This takes about a day to get everything back into a state to resume development.
We'd like to have master VMs that we keep up to date with the latest Windows updates, antivirus definitions, and versions of the common tools that we all use like Notepad++, Sysinternals Suite, and others. Every so often each of us will grab the master VM to our host machine to have the same copy of our most up to date development environment. Is there some way to copy down the user profile data so that we can restore it on the new VM when it is deployed? Items of personal preference like desktop shortcuts, Windows themes, pinned items on the taskbar, and other organizational items would be a pain to lose.
I need to replace a W2K computer on a domain with a Windows 7 computer(laptop), but I want to keep the same computer name.I need the ip, username, profile to stay the same. Can I delete the computer from the domain and name the new computer that name I deleted and still keep the users profile on the new machine, as if it was the old one?
when i try to create a new user profile ~ with or without a password, it shows up on the main login page, but when i click on it to open, the message "UserProfileService_service failed the logon_user profile cannot be loaded". i have searched microsoft support with little solutions listed. and the ones that are listed seem too technical for me to be trying on my own. there are many posts there with this problem, but they all seem to be several years old.
i am using windows 7. i have never been able to create any accounts other than my administrator account & the one account i use for all my general computer use. i have been using norton 360 with no problems. i have resorted to just using any "log in/log out' links on all the sites my husband wants to use.i am really not all that confident doing anything super technical to fix this, since i don't have a real understanding of different extensions or types of files. i am afraid i could really mess everything up really bad. but, it would just be SO MUCH EASIER & FASTER if i had my account & my husband had his own account.
My wife's Dell desktop (after a nighttime thunderstorm) will not permit her to log on. When she enters the password she gets the following message: "The User Profile Service service failed the logon. User profile cannot be loaded". Has anyone encountered this issue and is there a user fix, or should we take the computer back to where it was bought for service?
Not sure if this is where I should be posting this. Please redirect me if there is a better forum that I should use.I use my own laptop while working as a contractor. I am running Windows 7 ultimate x64 Sp1. The laptop uses homegroup to connect to other PCs whilst at home.To access network devices whilst at work I use the Cisco VPN client to attach to their network. This works great for most things I need to do, however,.If I need to access a shared directory on one of their servers the authenication window that appears.automatically adds my laptop name as a domain name. As this is not the domain of the server I fail to authenicate. The added domain name is not in the username box as in previous versions on windows but appears in the text part of the dialogue box so I cannot delete it.Is there any way that I can stop this from happening adn gain access to the files I need without resorting to a friendly staff member and a USB stick?
So a new box recently built, when booted, defaults to the local administrator account.This is a Windows 7 machine for a Linux guru that doesn't want to be bothered pressing more buttons than is necessary, if you get my drift. So my question is, after pressing Ctrl+Alt+Del...how do I dictate to Windows that the preferred used is "HisDomainAccount" on our company domain, as opposed to the local admin account?
When joining a set of laptops to the domain it prompts for domain admin credentials and appears to be successful, but gives an error of 'Changing the Primary Domain DNS name of this computer to " " failed. The name will remain domain.local The error was: The RPC Server is unavailable.
When attempting to add Domain Users to the local administrators group: Windows cannot process the object with the name "domain users" because of the following error: The RPC server is unavailable.
This happens even when wired on the network. I have tried uncommenting the localhost line in HOSTS, and manually adding the DNS server (which is also the DC).
So I had an issue with our windows 2000 server and took it off the network. Won't get into that right now. I ended up just setting up a workgroup for the time being until something can be done about the server. Three computers running windows 7 were pulled from the domain and put on the workgroup with no difference to the user profile. The desktop and all local data stayed the same. But for the 4th computer when it left the domain and restarted it had a new local profile and has a new desktop with all the data from the domain profile gone. My question: is it possible to either get a copy of the data from the domain profile, which I don't see under user accounts and can't switch to it as a different user, or to do a system restore to before leaving the domain then copy the data? The biggest issue is the loss of the pst file and a few files on the desktop that were not backed up recently. Is there anything I can do to get that data?
I changed the values in HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionProfileList in order to move the default user locations to my second partition. I then created a new user profile but when I try to login I get the message 'The User Profile Service failed the login'. When I set these values back to normal, new accounts work fine but I really want my user accounts on the second partition.
I recently took my pc in for repair of the raid drive. The service center used a software which allowed them to change my password, so that they could access the pc. however I believe it damaged my profile because now, I can not change the password from password and outlook no longer remembers any of my email passwords, I must reenter them all each time I run outlook. I am trying to avoid creating a new profile.I am running Windows 7 Professional 64x with a mirrored 2TB drive. Simple peer to peer workgroup
I have a Dell XPS M1730 with Windows 7 Ultimate and it was doing an iTunes update and the lid got closed during the update process. Now when I start the computer up it says "the user profile service service failed the login, user profile cannot be loaded". The computer starts up in safe mode and won't let me do a system restore because it says it is shut off.When I look at User Profiles in Windows 7, it states that the users profile is as backup and the default profile is the local profile. How can I fix my computer to get my user profile back up and working?
I am a lab technician for Microsoft classes at a community college. One of our students somehow messed up his hard drive. The computer is running Windows 7 Enterprise SP1 64-bit. The system has two administrator accounts and one standard user account. I am still able to logon with those accounts and there are SID keys for each of these users in the registry.
Now when we create a new user, the account is created without any problems. The user shows up on the logon page and after running the net user command, it shows up there as well. When I try to logon with the new user, I get a message: The User Profile Service failed the logon. User profile cannot be loaded.
None of the new user accounts show up in the registry. The other anomaly that I see is that the Default User folder is missing in each of the Users subdirectory for the three accounts where I have no problems.
I have read the Microsoft Knowledge Base Article 947215 and none of the methods apply to my problem. I also checked Local Group Policies and the Do not logon users with temporary profiles setting is not configured.
I get an message that says my profile is not loaded correctly after logging into AD Domain or my account sometimes takes forever to log onto AD Domain.
I have a laptop with Win 7 Home Premium, and one user account with administrative rights. Now, I would like to add two standard user accounts. How would I do that?I have experimented with copying over User files and folders, but I have really no idea what I should copy, if anything at all.
A twist on the creation of user folders on a drive other than C: in Win 7 Ultimate. Does anyone know if one could designate a user folder location such as E:Data instead of using the users name and being a subdirectory of "Users". I am the ONLY one on my computer - and it would seem much easier to look to the top folder in the E drive than clicking thru E:, users, name, documents, project. I fully realize that I can set up shortcuts, but when you are in an application that wants to place a file somewhere else and presents you with an explorer windows it is a pain. The only method I thought of is using redirection with symbolic links.
I have a batch file that I used on XP to run an MMC that I created for common management tasks. In the MMC I have the ability to run regedit as a root forest domain privileged user (for remote system registry editing), password resets (using AD) remote computer management, and several web links for common sites the team uses. I did this so it was all in one place and it worked awesome in Win XP. When I run the batch file it reports that the directory could not be found.[CODE]
I have verified that runas is in the same place as in XP, as well as MMC. I have run the batch file with elevate access as well as run the command prompt with elevated access (in fact that was copied from an elevated command prompt). The account I'm running it on has admin rights on the box, though UAC is set, I own both the account this was run from and the "root forest" privileged account, this account is NOT a domain admin.This is all being done on Win 7 Pro in a large enterprise domain environmentthis batch file worked and still works on Win XP in the same environment.
I cannot log on to either of the accounts on my HP laptop running Windows 7. I get a message saying " The User Profile service failed the logon" User Profile cannot be loaded. I cannot procedd any further with loading up.
I'm tired of my actions being blocked so I just want to leave the administrator account and delete the rest of them since I'm the only one on my pc. I can have only the admin account with these other accounts deleted without it causing any computer problems correct? I believe this is the case but I just want to make dang sure first.
I'm in the midst of implementing Windows 7 Professional in a high school. Currently I'm running a Win2k3 R2 active directory where each machine has its own login. I created my cloned image and replicated it to several student computers to test. For some reason on only 1 of the machines it won't save any domain user's profile information to the hard drive in the user folder.
Whilst trying to join the local homegroup network, I found out the issue was that my WORK laptop was connected to a domain & unable to share files because of being connected to this EX company domain/network.Naively, without first checking consquences, disconnected from the WORK domain & made the computer use for home & renamed it. Upon doing so, was asked to re-boot.On re-booting, the adminstator login password had resorted back to the one when setup originally?? As my normal password was not being accepted. I must add - I NO LONGER WORK FOR SAID COMPANY AND HAVE NO WAY OF ACCQUIRING PASSWORD/NETWORK/DOMAIN ACCESS DETAILS ANYMORE!I then used the windows password unlocker tool (£20 paid) to gain access back to my laptop. Obviously now realising a lot of very important information, emails, all desktop icons & file locations were no longer where they were supposed to be I spent an hour searching everywhere... The hard drive is still saying it has 150gigabyte of use & certain files display more data in 'properties' than is actually displayed in the folder itself.After doing a little research it looks like all my files, emails etc are in this imaginery 'domain' that I am now unable to access at all & no longer have the details to re-join again! A few files are still dotted around where they are supposed to be but a lot no longer accessable.With no access details to re-join this domain, is there any way AT ALL of re-claiming these files?
