It seems my "Configuration Registry is corrupted".after much goggling the only fix I've found is using a repair disk or install disk to do that whole Bootrec /rebuild bcd thing. All good, this is what I would like to try. the cd drive is booting first. I put in my original windows 7 install disk OR my windows 7 repair disk (homemade), with either one, it boots straight to windows every single time. I thought maybe something was up with my repair disk or something so I remade one, same files, sizes, etc, all the same.I tried the install disk on another pc, works correctly. I can read/write to my cd's when I have the OS booted up.everything works 100% fine.As I said my OS works totally fine and I've been using it for a long time now. I wanted to disable DEP, and that's when I noticed the "Configuration registry corrupt" message.I downloaded easyBCD and it also confirmed the "Configuration registry corrupt" message and was unable to access it.
how can I repair corrupted registry keys? Many people told me not to use Registry Cleaner! But if there a good Registry Cleaner please tell me! I use Revo uninstaller to full delete uninstalled programs registry! But there are old registry I have.
I have a HP mini, microsoft 2005 pretty sure its a Windows 7.Basically I pulled the battery out by accident at a bad time. I had left the laptop on all night. It has always been slow but when I opened it it was very very slow. I saw a sign from AVG, with a window box saying AVGDIUX.. an error message. I made a mistake and pulled out the battery.Now when I switch it on it only goes to a start up repair screen. It runs a check for problems, tells me it cannot fix it automatically and then offers to shut down the computer. Scan results are:
Number of repair attempts: 5 Session details System Disk = DeviceHarddisk0 Windows directory = D:Windows AutoChk Run = 0 Number of root causes = 1
[code]....
I switched it off and pressed F8 repeatedly at start up. I can get to the F8 screen with the different options. I tried to go to safe mode/safe mode with command prompts but automatically goes to the start up repair screen and then goes through the same process i.e. saying it is doing a check and then that it can`t fix it etc.
Got a BSOD with STOP error C00021a. Unplugged all peripherals except mouse and KB. Ran an sfc scan, but not all file corruptions could be repaired. Looked at the cbs.log. Three entries keep repeating, but I cannot find the files to replace them with the original ones from the CAB folder on the installation disc. ps1xml exists in several places in the Registry. The value is Microsoft.PowerShellXMLData.1.
The �offenders� are as follows:
2010-09-05 23:18:25, Info CSI 000001b6 [SR] Cannot repair member file [l:44{22}]"Registry.format.ps1xml" of Microsoft-Windows-PowerShell, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
my computer, a toshiba satellite L655D-S5159, has been broken recently. At first, I got an infinite startup repair loop, because of a corrupted registry. I checked the registry files and they are all 256kb. I tried to run sfc /scannow and chkdsk /f /r, but that didn't do anything. Then I tried to run bootrec rebuildbcd, and now I'm getting error 0xc0000225 at startup.
I have had this problem a few times and it causes the laptop to jam ever minute for five secs.Win 7 Pro 32bit on ProBook 4310s. I thought a reload would help so did thisIt was doing it updates and a pop up "The configuration registry database is corrupt". Now the problem is back after reload. Device mgr shows no errors at all. About the fourth time this has happended and I am presenting tomorrow.
I don't see my optical drive on my computer window box. I uninstalled the driver for my optical drive and reinstalled it (HL-DT-ST DVDRAM GSA-T50F). I still do not see the optical drive listed. In the device status window, under the general tab of the device manager window, is shown this message:
"Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)"
When I uninstall and allowed the computer to find the driver online, the same failure is shown. The computer window box still doesn't show my optical drive.
I am receiving a "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)None of my USB ports are working. I have tried to update driers, and modify the registry, but nothing seems to work. I don't have a way to get the information off my system, as none of the ports work, so I can't reset the machine to factory settings.
I've unistalled Amd Driver from Device Manager, Unistalled Catalyst software and ran Driver Sweeper. There is only 3 registeries that the Driver Sweeper CAN'T delete and these are under SYSTEM folder. I've tried to change user privilegies but this far I've not succeeded.
While windows was uploading some updates yesterday, I cleaned my registry using Iolo's system mechanic tool and that's where the problems started. (I already read and understood your message: don't use those tools and stay out of your registry. A lesson I learned too late, unfortunately.)My computer rebooted and after a couple of minutes I noticed the message: " failure configuring windows features reverting changes ". I managed to bypass this loop by running in safe mode and recover my computer to a restore point in the past. This only worked partially: I get windows to run in normal mode but I get this message: "system failed while restoring the registry from the restore point. Restore point damaged or was deleted during restore". So it didn't restore but I can get into my windows now.So I don't get the 'reverting change loop' anymore, so I can access my computer but what's the mess? Well my computer is slow as hell.Like mentioned above, I already looked around on this forum and wrote down what I already tried. [code] My computer is terrible slow because of a registry defrag/optimization of a registry tool (in combination with windows update) --> I need to find a way to get back my old registry files but system recovery ain't working.
I'm having trouble with my very new computer (Lenovo Y480 with Windows 7 Home Premium 64 bit), which I've narrowed down to the following sequence:
1. I restored computer to original factory settings (to rule out possible causes)
2. I ran msconfig, and checked the boxes 'Safe Mode' and 'Networking.' I got the following error message:"System configuration cannot save the original boot configuration for later restoration. Boot changes will be reverted. The system cannot find the file specified"
3. The default boot option disappeared from the boot menu (Windows 7, default OS, current OS).
4. When I restarted my computer, it would not boot and gave me the error 0xc00034, stating that the file BootBCD was missing.
I did not do anything else with my computer after restoring the factory settings, and I did not connect to the internet. I originally encountered the problem when I wanted to try installing Windows updates in safe mode after some of the installations failed. I have replicated the error several times, including after successfully installing all Windows updates.
When I try and open Programs and Features on my Windows 7x64 laptop it crashes momentarily with the proverbial, "explorer.exe is stopping" and explorer.exe is now restarting and I get to try and open Programs and features again. I went to the Event Viewer to troubleshoot what was causing this and it appears to be the MSI.dll according to the details in Event Viewer.
I had a major hick-up yesterday with Acronis, i managed to fix it but now i can't see my WD 3TB MyBook for some reason. The drive is ok cause if i put in on my laptop everything is working .Here's a pic of my device manager:I did try to reinstall the generic usb drivers with no luck, Reinstalled the WD SES Device driver , same thing, nothing.
Intel I7 2600k Asus P8X68-V PRO/GEN 3 16 GB Corsair Vengance 1866 OCZ Vertex2 180 gb Asus GTX580 CUII Windows 7 Ultimate sp1
When I am using my computer I get the message The recycle bin on c: is corrupted. Do you want to empty the Recycle Bin for this drive I've tried a couple solutions I've found trying to reset it, but no luck.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit Processor: AMD Phenom(tm) II X4 945 Processor, AMD64 Family 16 Model 4 Stepping 2 Processor Count: 4 RAM: 7935 Mb Graphics Card: ATI Radeon HD 3300 Graphics, 384 Mb Hard Drives: C: Total - 715401 MB, Free - 567343 MB; Motherboard: ASUSTeK Computer INC., M4A78T-E Antivirus: avast! Antivirus, Updated and Enabled
my pendrive is been shown but it cant read the files in it ..it says the data is unreadable and corrupted..it was working fine ..but i dont know what hapeenf..whn i chkd in command prompt it said that it does not hav system files!
"windows asking for startup repair every 2-3 days and i have to again instakk a new windows but it again gets corrupted i have tried every anti virus but each antivirus says my pc is clean?
i just salvaged my pictures from an accidently formatted hard drive, unfortunately most of them are corrupted. Here are some samples of how they look, and how they don't look.
I just purchased a new USB 256 GB flash drive to transfer documents from my desktop to the flash drive after the process completed I rebooted the computer when I opened my computer the flash drive was showing invalid characters when I opened a flash drive document they also had invalid characters labeled to them and I get the following error " The filename, directory name, or volume label syntax is incorrect."
I'm having displays issue where either black horizontal lines appear (while in Free-cell viewing photos) when maximized or text and icons are missing from windows such as device manager. In the case of the latter, when moused-over, the graphic or text (which was previously invisible) appears.The video card is an ATI Radeon HD5770 1024 mb GDDR5 PCI-E and both the monitor and computer are about a year old.These problems just started happening out of the blue.Since, I have updated the video card driver numerous times but to no avail.
I had a hd go out on me. So I order a new 1.5 tb hd and install win 7 fresh on it. When I try to access my old hd it just states it has drive I with no info and ask to be formatted before used. I want to recover my old files off of it.
I've moved tons of files to an external hard drive [Samsung external USB HD (FAT32)]. After that, I've tried to eject the device in Windows 7, via Safely Remove Hardware but Windows said that the device was in use, even though everything (applications and windows) were closed. I decided to use USB Safely Remove software to eject my portable HD. I really don't know if that was the problem, but since then I found a lot of folders inside my external HD corrupted.
In the corrupted folders, JPG files looks like this. I can't read the other files (PDFs and PSD) in those folders, Adobe Reader and Photoshop says that the file is damaged. I've tried Windows 7 error-checking but the files are still corrupted.
My 3Tb HDD recently started acting up. I use SSDs in a RAID0 to boot with and pretty much everything else, including desktop, downloads, documents, etc. are redirected to the HDD. It started with missing icons for shortcuts and then folders became inaccessible with an error message of "The file directory is corrupted or unreadable." The folders, that contained plenty of files, were reporting 0 content and more folders started to become affected.I restarted my computer hoping it was a temporary glitch but now windows is telling me the drive needs to be formatted. Disk Management reports the drive to be operational with 2794.52 GB RAW and Healthy (Primary Partition). I booted linux from a USB stick and was unable to mount the drive. Kaspersky Rescue Disk simply doesn't recognize the drive. Possibly the oddest thing, though, is that EaseUS Data Recovery software is reporting only about 770GBs for the partition. Whats strange about it is that's right around the amount of free space that was on the drive.
I haven't run a CHKDSK or checked for bad sectors yet because I'm hoping to try to recover the files if possible. I have backups of the important files but there's a huge amount of data that isn't backed up that I'd at least like to try to get to before reformatting or doing something else that will ruin any chance of recovery
i'm using an hp laptop with windows 7 home basic 64 bit . i have a big problem in downloading files . whenever i download any file from the internet with any extension and try to open it , it says "file is corrupt" . also , while playing a Internet video , it stops playing suddenly , although the grey tape ( that shows the downloaded part of the video) is full . i tried many different browsers , also i tried downloading Internet videos using real player , it always doesn't work.
I have a bigger problem now... I had a lot of restarts since a unknown problem appeared (what makes my windows freeze + restart all the time). Beacuse I restart my computer each day when he freezes, i have now problems like files and folders being corrupted and inaccessible. Can't access a folder or open program. It even says that some .exe program is corrupted or web browser too... but i can open 99% of them only not 1 or 2. I think that reinstalling my win is the only way out of these many problems i have now beacuse restarting my computer each day by 2-3 times isn't a solution.
I have a computer where all the drivers are corrupted ive seen this on vista as well. Basically all the drivers are bad the sound the network and audio all have yellow exclamation points on them.
I'm transfering all my data to a new hdd using gparted. My ubuntu partition went fine but my windows 7 is corrupted or broken. I tried twice to clone the partition but the new one is behaving oddly. url...first when windows starts theres nothing on the screen, i have to ctrl+alt+del and create a explorer.exe process, then I can't navigate because any attempt to enter "computer" or any explorer windows returns a warning with "no such interface supported". All my data is still there but is currently unusable.I really want to clone it because reinstalling everything is going to be too much time consuming.
I damaged my drive, while I use decrypting my BitLocker encrypted External Hard Disk, due to numerous disconnection because of loose USB port. The Decryption was almost half way done. Now the drive is not shown in My Computer but it is detectable through other O/S like MAC, Linux as Unknown partition.
I'm getting the winload.exe missing or corrupted error, and I can't seem to find a fix for it if you have an oem computer, and thus no installation disk. I cannot go to the startup repair option (pressing f8 while on the screen), it just does nothing.
I started up my computer around an hour ago and found the following message; "The file system32/hal.dll is missing or corrupt.re-install the file." So, at a loss as I'm not a Tech-person in any yway, I turned to the internet and found, after several XP posts, some to do with Windows 7. I'm on 64-bit, and have tried inserting my installation disk as well as the system repair.I've looked at this, but seeing as I'm Windows 7 & not XP I can't see why it would work; Error Message: Windows could not start because the following file is missing or corrupt I'm following another Microsoft guide that asked to me run a command in a command prompt, Bootrec.exe which in turn gave me 4 options, only I'm not sure which option to choose.
