When I try and open Programs and Features on my Windows 7x64 laptop it crashes momentarily with the proverbial, "explorer.exe is stopping" and explorer.exe is now restarting and I get to try and open Programs and features again. I went to the Event Viewer to troubleshoot what was causing this and it appears to be the MSI.dll according to the details in Event Viewer.
I had a major hick-up yesterday with Acronis, i managed to fix it but now i can't see my WD 3TB MyBook for some reason. The drive is ok cause if i put in on my laptop everything is working .Here's a pic of my device manager:I did try to reinstall the generic usb drivers with no luck, Reinstalled the WD SES Device driver , same thing, nothing.
Intel I7 2600k Asus P8X68-V PRO/GEN 3 16 GB Corsair Vengance 1866 OCZ Vertex2 180 gb Asus GTX580 CUII Windows 7 Ultimate sp1
When I am using my computer I get the message The recycle bin on c: is corrupted. Do you want to empty the Recycle Bin for this drive I've tried a couple solutions I've found trying to reset it, but no luck.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit Processor: AMD Phenom(tm) II X4 945 Processor, AMD64 Family 16 Model 4 Stepping 2 Processor Count: 4 RAM: 7935 Mb Graphics Card: ATI Radeon HD 3300 Graphics, 384 Mb Hard Drives: C: Total - 715401 MB, Free - 567343 MB; Motherboard: ASUSTeK Computer INC., M4A78T-E Antivirus: avast! Antivirus, Updated and Enabled
my pendrive is been shown but it cant read the files in it ..it says the data is unreadable and corrupted..it was working fine ..but i dont know what hapeenf..whn i chkd in command prompt it said that it does not hav system files!
"windows asking for startup repair every 2-3 days and i have to again instakk a new windows but it again gets corrupted i have tried every anti virus but each antivirus says my pc is clean?
i just salvaged my pictures from an accidently formatted hard drive, unfortunately most of them are corrupted. Here are some samples of how they look, and how they don't look.
I just purchased a new USB 256 GB flash drive to transfer documents from my desktop to the flash drive after the process completed I rebooted the computer when I opened my computer the flash drive was showing invalid characters when I opened a flash drive document they also had invalid characters labeled to them and I get the following error " The filename, directory name, or volume label syntax is incorrect."
I'm having displays issue where either black horizontal lines appear (while in Free-cell viewing photos) when maximized or text and icons are missing from windows such as device manager. In the case of the latter, when moused-over, the graphic or text (which was previously invisible) appears.The video card is an ATI Radeon HD5770 1024 mb GDDR5 PCI-E and both the monitor and computer are about a year old.These problems just started happening out of the blue.Since, I have updated the video card driver numerous times but to no avail.
I had a hd go out on me. So I order a new 1.5 tb hd and install win 7 fresh on it. When I try to access my old hd it just states it has drive I with no info and ask to be formatted before used. I want to recover my old files off of it.
I've moved tons of files to an external hard drive [Samsung external USB HD (FAT32)]. After that, I've tried to eject the device in Windows 7, via Safely Remove Hardware but Windows said that the device was in use, even though everything (applications and windows) were closed. I decided to use USB Safely Remove software to eject my portable HD. I really don't know if that was the problem, but since then I found a lot of folders inside my external HD corrupted.
In the corrupted folders, JPG files looks like this. I can't read the other files (PDFs and PSD) in those folders, Adobe Reader and Photoshop says that the file is damaged. I've tried Windows 7 error-checking but the files are still corrupted.
My 3Tb HDD recently started acting up. I use SSDs in a RAID0 to boot with and pretty much everything else, including desktop, downloads, documents, etc. are redirected to the HDD. It started with missing icons for shortcuts and then folders became inaccessible with an error message of "The file directory is corrupted or unreadable." The folders, that contained plenty of files, were reporting 0 content and more folders started to become affected.I restarted my computer hoping it was a temporary glitch but now windows is telling me the drive needs to be formatted. Disk Management reports the drive to be operational with 2794.52 GB RAW and Healthy (Primary Partition). I booted linux from a USB stick and was unable to mount the drive. Kaspersky Rescue Disk simply doesn't recognize the drive. Possibly the oddest thing, though, is that EaseUS Data Recovery software is reporting only about 770GBs for the partition. Whats strange about it is that's right around the amount of free space that was on the drive.
I haven't run a CHKDSK or checked for bad sectors yet because I'm hoping to try to recover the files if possible. I have backups of the important files but there's a huge amount of data that isn't backed up that I'd at least like to try to get to before reformatting or doing something else that will ruin any chance of recovery
i'm using an hp laptop with windows 7 home basic 64 bit . i have a big problem in downloading files . whenever i download any file from the internet with any extension and try to open it , it says "file is corrupt" . also , while playing a Internet video , it stops playing suddenly , although the grey tape ( that shows the downloaded part of the video) is full . i tried many different browsers , also i tried downloading Internet videos using real player , it always doesn't work.
I have a bigger problem now... I had a lot of restarts since a unknown problem appeared (what makes my windows freeze + restart all the time). Beacuse I restart my computer each day when he freezes, i have now problems like files and folders being corrupted and inaccessible. Can't access a folder or open program. It even says that some .exe program is corrupted or web browser too... but i can open 99% of them only not 1 or 2. I think that reinstalling my win is the only way out of these many problems i have now beacuse restarting my computer each day by 2-3 times isn't a solution.
I have a computer where all the drivers are corrupted ive seen this on vista as well. Basically all the drivers are bad the sound the network and audio all have yellow exclamation points on them.
I'm transfering all my data to a new hdd using gparted. My ubuntu partition went fine but my windows 7 is corrupted or broken. I tried twice to clone the partition but the new one is behaving oddly. url...first when windows starts theres nothing on the screen, i have to ctrl+alt+del and create a explorer.exe process, then I can't navigate because any attempt to enter "computer" or any explorer windows returns a warning with "no such interface supported". All my data is still there but is currently unusable.I really want to clone it because reinstalling everything is going to be too much time consuming.
I damaged my drive, while I use decrypting my BitLocker encrypted External Hard Disk, due to numerous disconnection because of loose USB port. The Decryption was almost half way done. Now the drive is not shown in My Computer but it is detectable through other O/S like MAC, Linux as Unknown partition.
I'm getting the winload.exe missing or corrupted error, and I can't seem to find a fix for it if you have an oem computer, and thus no installation disk. I cannot go to the startup repair option (pressing f8 while on the screen), it just does nothing.
I started up my computer around an hour ago and found the following message; "The file system32/hal.dll is missing or corrupt.re-install the file." So, at a loss as I'm not a Tech-person in any yway, I turned to the internet and found, after several XP posts, some to do with Windows 7. I'm on 64-bit, and have tried inserting my installation disk as well as the system repair.I've looked at this, but seeing as I'm Windows 7 & not XP I can't see why it would work; Error Message: Windows could not start because the following file is missing or corrupt I'm following another Microsoft guide that asked to me run a command in a command prompt, Bootrec.exe which in turn gave me 4 options, only I'm not sure which option to choose.
kodak all-in-one 7200 printer wireless software will not load, because it says due to corrupted window 7 os Help but keep getting kodak wireless added to all other to all other computers in house. what part of my o.s. do I need to modify to load kodak version 6.2.0 ?
how can I repair corrupted registry keys? Many people told me not to use Registry Cleaner! But if there a good Registry Cleaner please tell me! I use Revo uninstaller to full delete uninstalled programs registry! But there are old registry I have.
I was having troubles with deleting some files and folders in windows 7, I used a software called longpath. It works fine. Do I have any other options to do that thing? Or is it ok to be with longpath?
i have a system with a corsair force 3 60GB SSD with Windows 7 on it. Recently, when i tried booting the system, it would not boot into windows, instead it would get stuck on the "Loading Operating System .................................................................." page and then it would ask to load an operating system and press ENTER.
I have inserted the drive into another computer by USB to check the system files and it seems fine, i can read and write to and from the drive and i can see the system files on my other com.
I have also tried booting the Drive from other computers but same issue. I am not sure if its a driver issue or a corrupted windows file.
I have tried other methods, setting the drive to first boot, forcing the system to boot from the drive, setting to ACHI mode, inserting the drive into different SATA ports and controller, all to no avail.
System: AMD Phenom II x6 t1055 Biostar A770E3 / A78XAA3S-R03 v6.0 2x4GB Kingston pc3-10600 (1333Mhz), just new installed. ATI HD5750 True Color Windows 7 x32 & x64 Ultimate NL Retail
I had some issues after doing what an Anti Virus software asked me to do and register cleaning.Windows looked acting slow and some futures (both still) don't work.I have to mention that I had a bad memory that killed two slots on the main baord.Previously the Windows 7 x32 didn't start completally, it didn't get to the login screen. The mouse pointer was vissable and the screen was black.
I looked on the net for answers, but found non. So, I tried to expermimanted some F8 functions ad the MBR screen. I found one that did work, something for domein users. All the other options didn't work.I got it started (safe mode) and deleted the last month installed software.Did a chkdsk /F and restarted. [URL]I found one site with the command sfc /scannow to check the system files and fix them.After a while (not minutes as it says) I got the notification that not all system files could be fixed.It installed a log file ad WindowsLogCBS about 24MB.How to fix these errors?no reinstallation. I have software that came from GiveawayOfTheDay, the software can only be installed once.Or,After a reinstall, would it be possible to reinstall the software from the Old installation. Actually stupid to do, can have bugs too.
Is there a total Windows 7 x32/x64 repair disk that comes with the programs itseld and can check the net for information and can install and deinstall software for download?I forgot to burn the one that came with Windows 7.I downloaded a Repair disk, but it kept asking for Backup and Command prompt didn't work either.Guess, the DVD program did need those files on the Windows HDD installation too.Autoback up was disabled, don't know how. So, no backup at all. No restore points either.
my dvd rom is working but its driver is crrupted when i try to auto fix the problem i got a msg( Windows cannot load the device driver for this hardware. The driver may be corrupted or missing0. (Code 39)
My hard disk is corrupted and it causes frequent blue screen and restarts. I bought a new hard disk and transferred the data to the new hard disk. While transferring the files from old hard disk to new hard disk, the pc still encounters frequent blue screen and restarts, causing the data transfer to suddenly stop when it restarts.
Now I have installed the new hard disk and everything works fine.
The problem is when I open some word and excel files, the files are blank (like a new document) or show me a error message. This is probably caused due to the sudden restart while I was transferring files. I remembered some of the corrupted files are being transferred when the pc restarts by itself.