Computer Turns On Back When Hibernate
May 6, 2011
I am having a problem with a new installation of Windows 7 Home Premium. I have always liked the Hibernate feature and used it extensively when I was running Windows Vista Ultimate. Since installing Windows 7, whenever I run Hibernate the computer turns back on. When I used Hibernate in Windows Vista Ultimate I knew that the programs that I left open would be where I left off when I restarted the computer from Hibernate. Now, it just seems to turn on when it wants to. I am sure it is a setting in the Power Settings category in Control Panel. I'm just not sure how to set.
View 10 Replies
ADVERTISEMENT
Aug 13, 2012
i am able to turn my computer on for a few seconds but then it automatically shuts itself off after a few seconds but the thing is after letting it sit for a couple seconds it says something about how the clocks on my processor have been overclocked too high and asks if it wants me to restore them, so i do that and then the computer works fine, but then when i turn it off and turn it back on it does the exact same thing until i get that message again.i've tried manually reducing the clocks on my cpu even though they were already at stock clocks and that didnt work
system specs:
windows 7 ultimate 64bit
intel core 2 quad q6600 @ 2.4ghz standard clocks
4gb ddr2-800 ram
ati hd 4760 1gb ddr3
View 2 Replies
View Related
Oct 22, 2009
When ever I start a game the monitor goes blank, well almost blank (little white blinking cursor in top left) for a couple of seconds and then its fine again.
Anyone have this issue?
View 9 Replies
View Related
Apr 11, 2011
I have a Compaq-CQ5302F,when I turne it on it goes right back off. The motherboard is Pegatron(Evans)?
View 2 Replies
View Related
May 7, 2011
when i put my computer into sleep mode, the computer turns off for 5 seconds and turn's on alone.
View 2 Replies
View Related
Jun 12, 2012
My first guess was that since we have an electrical instability in our home, perhaps the uneven flows of power would sometimes send a false signal to the power unit of the computer and trigger a start-up (quite often the lights in our home will briefly, and sometimes violently, wave up and down, especially at night).
View 3 Replies
View Related
Dec 27, 2012
so basically most nights when i go to bed i will put my computer on sleep, but recently my computer has been turning itself on during the night, i checked task scheduler and there is nothing there that would trigger this, although i tried the powercfg lastwake command in command prompt and got this
View 1 Replies
View Related
Jan 5, 2011
Have new PC and it used to hibernate after a period of time. The fans will shut down, monitors shut down etc. When I wake it then fans start back up, I have to relog in to Windows etc. Suddenly it no longer does this. I do not recall changing any setting and have gone to screen saver and set power saving settings etc. This is my first Windows 7 machine so not sure if i need to do something elsewhere
View 2 Replies
View Related
Jan 24, 2012
i hav this friend of mine whose computer turns off itself few seconds later after turning it on,it has been running perfectly before this,until he installed another 1GB DDR2 ram..i cant figure out what the problem is.
View 4 Replies
View Related
Sep 16, 2012
i have installed 2 case fans to have to air flow. and when i booted the pc couple of mins later, it suddenly turns off. i unplug both of the case fans and did the same thing.
View 6 Replies
View Related
Dec 20, 2011
When I turn on my computer it turns off, I fix my computer by restoring for a few hours then the problem comes back.
View 4 Replies
View Related
Feb 18, 2012
I have just finshed building my computer and when I turn it on nothing displays on the monitor ! The case fans are running but theres no display. Also I noticed that when I turned it on the CPU fan would spin for a while then stop spin then spin again. I have tried to unplug the CPU fan and replug it back in and it still happens. Is it because of a faulty Mobo?
View 7 Replies
View Related
Jan 1, 2013
Okay, so a while ago I finished building my new Pc. It was working fine for about 3 days but then it would randomly go black and show the message, "Please select a proper boot device and press a key". Prior to this I had accidently been turning off the power to my computer (it was in a weird position, so when i stretched i would kick the cable). Could having turn off the power caused this? I only did this twiceI also tried connecting it to different sata ports and nothing
View 7 Replies
View Related
Nov 18, 2009
I upgraded to Windows 7 when it was first released and for some reason cannot use the sleep function. My power options in the control panel are set to "Balanced." I've opened up every menu I can think of and changed the settings but can't figure out why I can only use hibernate.
View 9 Replies
View Related
Oct 31, 2012
I got my laptop a few weeks ago and noticed that it will sometimes go into hibernate, and other times it will not, and instead hang on a black (but enabled/on) LCD. When you touch the keyboard, it even makes Windows 7 dings for incorrectly pressed key (meaning the OS is still on). If it is going into sleep or hibernate due to low battery and this error happens, it will just keep beeping really loudly at me until the laptop dies (I'm assuming that's the motherboard's part, though).I have no idea what to do, and I'm really freaking puzzled right now. I've already tried turning hybrid sleep on and off, and neither of them yielded any positive results. Anyone have any clue what I should do?
PS: I've noticed last night after gaming for a bit, that the fans remained in a full blast state (yes, even when the game is closed). This might be related to it although I am not sure. Also, I cannot upgrade my video drivers because the graphics are integrated with the Intel Integrated Graphics, meaning the drivers are made by the manufacturer.
Here's my laptop specifications by the way:
-1920x1080 LED Backlit Display
-2GB GDDR5 AMD Radeon 7970m
-Intel Core i7 3720QM Quad-Core Processor (2.60GHz), 6MB Cache
-8GB Corsair Vengeance DDR3 1600MHz (2 X 4GB)
-Genuine MS Windows 7 Home Premium 64-Bit Edition
-Slot 1: 256GB Samsung 830 Series - Solid State Drive
-Slot 2: 500GB SATA 3.0Gb/s, 7200RPM, 16MB Cache HDD
-Integrated High-Definition Audio with THX TruStudio Pro and up to 7.1 Channel support
-Wi-Fi Link 802.11A/B/G/N Wireless LAN Module with Bluetooth - Up to 300 Mbps
-SuperSpeed USB 3.0 Ports
View 5 Replies
View Related
Feb 8, 2011
Like it says on my title. I put my computer into sleep mode when i am stepping away from my computer. It succesfully goes into sleep mode then i come back and it is on wanting a password. So i sit there wondering if i turned it off or not Well i watched a few days later cause the problem still hasent stoped and i watched it go into sleep mode then a few minutes later turnes back on
View 6 Replies
View Related
Nov 20, 2011
Turns out all my problems were an aged battery, according to the tech shop who reinstalled windows after some deeprooted viruses. But now my laptop won't shut down all the way, but the screen turns off. The keyboard's LEDs stay on, and the fan keeps blowing. It stayed that way for at least five minutes, between me getting a snack and coming back. I don't know if they reinstalled from the disc that shipped with the laptop or gave me a knew windows 7, but this particular issue only started when they reinstalled the OS.
View 9 Replies
View Related
Mar 3, 2012
I'm having some problems with my computer shutting down randomly. No BSOD. I just reset the BIOS and removed a single GPU, so I am no longer in SLI mode.
View 9 Replies
View Related
Mar 10, 2012
As the title says, if I turn my computer off, wait for every hard drive to stop spinning, then turn my subwoofer off at the switch on the back (not stand by mode) it will turn the computer back on again...I thought it was some kind of WOL or something, but i've turned all that off and it still keeps waking it up
View 9 Replies
View Related
Aug 28, 2011
When I turn my computer on nothing happens. The power light comes on and I hear ONLY the fans turning. Nothing happens on the screen, it just stays black. It does say NO VGA signal.
View 1 Replies
View Related
Jun 5, 2012
I have this problem with a Packard Bell Desktop computer, It randomly crashes when doing startup, I dont know if its the motherboard, or the HDD. But it crashes after 4-5 min of driving, it starts up at BIOS Screen, with 3 beeps and then it goes to windows startup restore, and it cant startup windows either. So im trying at the moment to format the computer, but it gets the the "Windows Is Loading Files" At the second part of it, it gets half way in the loading, and it random turns off, and it keeps happending all the time, I dont know if its the HDD, or any Hardware Problem in the BIOS, or GPU
View 5 Replies
View Related
Jul 19, 2012
When the the computer turns do not see the POST process and the windows loading processOnly when the system up then seeing the Desktop After a short time.A similar process happens when doing Switch User while the screens have a black screen until it shows in this process.
View 2 Replies
View Related
Jan 24, 2013
my computer tower turns on but when i hook up the connection cord with the monitor it says that there is not a signal.
View 4 Replies
View Related
Aug 5, 2011
I have an ASUS G51JX-X2 laptop with 8 GB RAM (4 2GB chips). I've had this computer for about 18 months without any problems. A couple of days ago, I noticed that the computer hung up when trying to hibernate. The screen was black and the hard drive light was off, but the touchpad, wireless, bluetooth, and power lights remained on. I left it and went to work, and when I returned it was still in this state so I held the power button to shut it down. The computer started normally, but then that night when I went to shut the computer down, it did the same thing. I made some changes to disable the services at start up in an attempt to narrow down the problem and I discover that is I choose restart, the computer shuts down and restarts fine (although it sits with the screen black and the lights on for a while). It will not shut down or hibernate though. what's going on:
I thought I might have gotten a driver update so I looked at Windows Update and I hadn't gotten anything since 7/21. I did get one on 8/3, but that was after I started having problems. Using msconfig I disabled the start up services (except MS) and start up items to see if that helped and rebooted. The reboot worked, but then the shutdown failed again. I read in some forums that it might be related to the wireless, so I used the switch on the front of the computer to turn off wireless and bluetooth before shutting down - no luck. I thought it might be a problem with the memory since that's a relatively recent upgrade so I created a boot CD and ran memtest86+. It ran all night through 4 passes and no errors. I ran chkdsk on the hard drive just to be safe and it didn't find any errors. I checked to see if ClearPageFileAtShutdown was set to 1 in the registry, but it is 0. I checked to make sure that the bios is up to date and it is (version 208).
View 1 Replies
View Related
Jan 23, 2012
I have an inspiron 1545 running windows 7 (x64) and I am having problems waking up my computer from sleep . Usually, when I put my computer to sleep, I have problems waking up my computer. The screen stays relatively dark when I move my mouse although I can see some light coming from the bottom part of the screen (so the screen seems to be on, just not showing anything sueful). When I try to press the space bar multiple times, my computer gives me a warning ding and it plays a sound when I insert or remove my usb mouse.
View 1 Replies
View Related
Dec 6, 2011
My computer is several years old, and just a few weeks ago started having a problem waking from standby. Up until now, it had no issues going into and coming out of sleep.Now, whenever it goes to sleep (whether due to inactivity or putting it to sleep manually), it won't wake up. The lights come on, the fans come on, but the monitor stays in standby. I've looked around online and found that many people get a black screen when booting up, i.e. the monitor comes alive and they may get a mouse cursor, but that's not what's happening to me. I don't get a black screen--my screen is never getting a signal from the computer. I have to do a hard reset, after which I get the 'Start Windows Normally' screen.I've tried uninstalling and reinstalling the graphics drivers, changing hybrid sleep settings, using hibernate instead of standby, uninstalling random programs, etc, to no effect. I don't think I had any major windows or driver updates that caused it.
View 1 Replies
View Related
Jul 2, 2011
I've been experiencing this problem for about a week now. It started seemingly randomly, as I haven't made any significant changes to my computer. If I try to hibernate or shut down my computer it hangs up on either "Logging off" or "Shutting down" and stays there. I've let it run for as long as an hour, but ultimately I have to crash my computer every time I need to turn it off.
View 4 Replies
View Related
Dec 10, 2012
My computer will not do anything past turning on. It is frozen on the first screen it shows, which is the screen that gives you your computer info and tells you to press F1 to resume. It says S.M.A.R.T. Capable and Status BAD; AHCI Port0 Device Error. It obviously does nothing when I click F1, I have tried control alt delete and clicking the escape key. The only action I have is to turn it off!
View 1 Replies
View Related
Dec 11, 2012
since a few days the hibernate option is not working on my computer. I tried the Microsoft fix it programs for disabling and enabling hibernation, but it didn't help.
View 1 Replies
View Related
Dec 17, 2009
Everytime I put my computer to sleep or hibernate and wake it up, the computer restarts. How can I figure out which driver is causing this?
View 2 Replies
View Related
Nov 12, 2012
W7F_12-11-2012.zip what is causing this crash?
View 1 Replies
View Related
