I've been experiencing this problem for about a week now. It started seemingly randomly, as I haven't made any significant changes to my computer. If I try to hibernate or shut down my computer it hangs up on either "Logging off" or "Shutting down" and stays there. I've let it run for as long as an hour, but ultimately I have to crash my computer every time I need to turn it off.
View 4 Replies
I upgraded to Windows 7 when it was first released and for some reason cannot use the sleep function. My power options in the control panel are set to "Balanced." I've opened up every menu I can think of and changed the settings but can't figure out why I can only use hibernate.
View 9 Replies View RelatedI got my laptop a few weeks ago and noticed that it will sometimes go into hibernate, and other times it will not, and instead hang on a black (but enabled/on) LCD. When you touch the keyboard, it even makes Windows 7 dings for incorrectly pressed key (meaning the OS is still on). If it is going into sleep or hibernate due to low battery and this error happens, it will just keep beeping really loudly at me until the laptop dies (I'm assuming that's the motherboard's part, though).I have no idea what to do, and I'm really freaking puzzled right now. I've already tried turning hybrid sleep on and off, and neither of them yielded any positive results. Anyone have any clue what I should do?
PS: I've noticed last night after gaming for a bit, that the fans remained in a full blast state (yes, even when the game is closed). This might be related to it although I am not sure. Also, I cannot upgrade my video drivers because the graphics are integrated with the Intel Integrated Graphics, meaning the drivers are made by the manufacturer.
Here's my laptop specifications by the way:
-1920x1080 LED Backlit Display
-2GB GDDR5 AMD Radeon 7970m
-Intel Core i7 3720QM Quad-Core Processor (2.60GHz), 6MB Cache
-8GB Corsair Vengeance DDR3 1600MHz (2 X 4GB)
-Genuine MS Windows 7 Home Premium 64-Bit Edition
-Slot 1: 256GB Samsung 830 Series - Solid State Drive
-Slot 2: 500GB SATA 3.0Gb/s, 7200RPM, 16MB Cache HDD
-Integrated High-Definition Audio with THX TruStudio Pro and up to 7.1 Channel support
-Wi-Fi Link 802.11A/B/G/N Wireless LAN Module with Bluetooth - Up to 300 Mbps
-SuperSpeed USB 3.0 Ports
I have an inspiron 1545 running windows 7 (x64) and I am having problems waking up my computer from sleep . Usually, when I put my computer to sleep, I have problems waking up my computer. The screen stays relatively dark when I move my mouse although I can see some light coming from the bottom part of the screen (so the screen seems to be on, just not showing anything sueful). When I try to press the space bar multiple times, my computer gives me a warning ding and it plays a sound when I insert or remove my usb mouse.
View 1 Replies View RelatedEverytime I put my computer to sleep or hibernate and wake it up, the computer restarts. How can I figure out which driver is causing this?
View 2 Replies View Relatedi just built this computer i did everything try to put it to sleep or hibernate, the screen will turn off but the computer is still running, i've tried to enable hibernation option by turning it on in command center powercfg -h on. and i went to disk clean up the Hibernation File Cleaner is not there.when it put powercfg a it saids "the following states are available standby "s1" hibernate"i also went to bios and the setting is on S1, i also disable the network adapter from waking the computer up.i have
Processor - AMD Anthlon ii x4 635
MotherBoard- msi 785gm-E51 (MS-7596)
Graphic Card - nvida geforce 9800 gtx+
ram- 4g ddr3 1600
System - windows 7 64 bit.
When I sleep or hibernate my computer, within 10 seconds of it turning off, it turns back on again by itself. When it turns back on, there is no output on my monitor. I used remote desktop from another computer to see whether it was just the video that wasn't being reposted, but when I tried to connect, it couldn't find the computer. None of the keys work on my keyboard, including the sleep and power buttons.
I have an ASUS P5LD2 Deluxe motherboard, and an Intel 3.0 GHz processor. I'm also running the x64 version of Windows 7.
Any ideas how to stop it starting up autonomously ?
My Windows 7 64-bit laptop crashes when I return to my computer after sleep/hibernate.
I cannot set up symbols on MS debugger (after many attempts) I have attached screenshots of cpu-z (both tabs) and my event viewer which lists 24 critical failures, all event ID 41: "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
p.s. Dunno if this is important but the machine is a Sony Vaio but I have uninstalled all sony bloat ware (except Vaio Control Center)
My laptop is a vaio ( VPCEA12EG). newly when I hibernate it , it automatically shutdown and after turn it on again the following massage apears.
View 9 Replies View RelatedOk so when I had XP I would always use hibernate and only about once a week I would actually reboot the computer completely. Now that I have Windows 7 I would like to do the same. But now when I click hibernate the screen goes black and everything shuts off but the computer acts like its in standby. The lights are still on and computer is running.
Once this happens I cannot get back into windows or reboot without holding down the power button to force a reset. Each time that I have done with Windows 7 boots an error saying the computer was not shutdown correctly. Anyone know why it won't completely power off when I click hibernate. I have tried it about 5 separate times and it has not worked once.
I always seem to get that dreaded BSOD warning a lot of times after I hibernate. The night before I'll set my computer into hibernation. I'll wake up the next morning, press the power button on the computer, and receive the "windows did not shut down correctly" black screen error. The computer always starts up fine, but then I get the message:
Quote: Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8005BC9060
BCP3: FFFFF80000B9C4D8
BCP4: FFFFFA800BD27D10
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1 I have a HP p6234f running Windows 7 64bit OS which was installed in this computer when I bought it two years ago.
I have a dell XPS1702x laptop Windows 7 64, this problem came up in the last 5 days after I installed a logitech M705 mouse and software.When ever I put my laptop in sleep or hibernate and start up again I get a blank screen, but the laptop seems tobe running I have to turn the computer off and then on again using the power button. My computer then restarts and opens in the Error Recovert Screen stating that the computer was turned off improperly and ask if I want to restart Windows. I have preformed a complete Virus scan with Nortons 360, I have updating all my software, uninstalled the mouse and returned to my old mouse and the software for the new mouse and the problem is still there.
View 3 Replies View RelatedI have been trying to make my computer go into hibernation but it comes out of it 5 mins later. I have tried everything. disabling mouse to wake up, turning off power management on lan, turned off wol, and disk defragmentor.
View 1 Replies View RelatedI've got a new ASUS gaming laptop with Windows 7 64-bit OEM and I've been getting a few BSOD errors while bringing my laptop out of sleep/hibernate. Its not always but its often enough to be a nuisance. My drivers are all up to date
View 4 Replies View RelatedI have two new laptops (an HP and a Gateway) with Win 7 Pro on each, and set up exactly the same. On the Gateway, the sleep and hibernate work fine.On the HP, the sleep and hibernate are greyed out.Using cmd: powercfg -a The Gateway shows " the following sleep states are available ... Standby (S3),Hibernate Hybrid Sleep"..The HP shows "sleep states not available..system firmware does not support standby state" "legacy driver vgasave .. prevents this standby state"..How can I get my HP to support sleep/hibernate?
View 3 Replies View RelatedIs this possible? I have my hard drive on my laptop truecrypted. So when I wake it up from hibernate I have to enter my password at the bootmanager, and then a windows password when I log in, too much work. Especially when the bootmanager password is like 30 characters and the windows one is like 20. So is there a way to only ask for a password from sleep but not from hibernate?
View 1 Replies View RelatedI never used the sleep & hibernate in windows 7 & I would like to know what they do & what is the deference between them.
View 4 Replies View Relatedmy system (ASUS A6Va laptop) I have trouble with sleep and hibernation. Computer can enter sleep mode normally, but when I wake it up I get the black screen and have to hard reset. Now I know this a somewhat common problem with no universal solution, but the more interesting problem I have is with hibernation. When I choose hibernate option computer tries to go to hibernate mode but after some time (not longer than 20 seconds) it just gets back to login screen with my session active. The interesting part of all that is that my hiberfil.sys file is smaller than my RAM. It is only 1.4 gigs in size, when I have 2 gigs of RAM. I tried disabling and enabling hibernation but it's still only 1.4 gigs big.
View 1 Replies View Related2 hour hibernation for both CPU and monitor worked perfectly for about two weeks, waking up with a touch to the spacebar. Then a few days ago the monitor would not wake up but the computer did. Now if I turn off the AC .
power to both units and then re-boot the monitor will turn on but will go back to sleep in about 15 minutes with the blue light blinking. The computer will complete a DL or backup with monitor sleeping so it appears OK.
Checks so far:
1. Updated drivers for both monitor and video card with latest available. Also updated chipset and BIOS (504).
2. Swapped monitors between computers and the problem went to the second monitor. Main monitor worked all day on second computer.
3. Spoke to ASUS tech support and was told that the monitor is controlled by the OS. Suggested I enable ACPI 2.0 support (default disabled) and disable ACPI APIC Support (default enabled) in BIOS. Won't boot to OS when ACPI APIC Support disabled.
4. Found a few similar cases on the Internet but no solutions.
5. Even tried turning off hibernation and setting monitor timeouts in the Powercfg using CMD prompt.
6. Re-installed OS, big mistake as it took several hours to get re-registered.
some time recently my desktop stopped "sleeping" whenever i am not at my desktop I always put it to sleep (trying to save power on a 1200watt PSU) Yet recently when I set it to sleep my display will turn off but all my fans and lights etc are still running. The same goes for hibernate mode as well. With this I have to fully shut down my PC a couple times a day which isn't my ideal situation
View 2 Replies View RelatedWindows 7 will will shutdown if I hold down the power button, however it will not shutdown when manually hitting "Shutdown" or just pushing the power button once.Everything looks normal when it's shutting down, it says it's shutting down. The lights on the case and fans go off, the fans shut off, yet a few seconds after the fans shutdown completely, the computer magically starts back up again. So it does shutdown (technically, all the signs are there) but it starts back up.Aside from the shutdown feature not working, sleep doesn't work (I don't use hibernate because I don't want to waste SSD write cycles). When I put the computer into sleep mode, it shuts down the fans and lights, however just like the shutdown issue, the computer powers itself back on (wake on LAN is off). Even though it is powered on, it isn't out of sleep mode. None of the peripheral devices work and I can't get the monitors to turn back on, therefore I have to hard boot the computer by holding down the power button. When I turn the computer back on, it is back where I left it before I put it into sleep mode.
View 6 Replies View RelatedI've tried removing AVG using their removal tools and instructions. I've tried fully removing my video and mobo drivers with driver sweeper and installing the latest GPU and Motherboard drivers and flashed the latest Motherboard BIOS. I've scoured forum after forum and seen similar issues and tried countless solutions. I haven't seen someone with my -exact- problem and -exact- spec/error reports so I'm caving lol. I build and maintain PC's as a hobby and I like to solve problems on my own know-how but I am at wits end with this BSOD.
Quick specs:
Windows 7 Ultimate 64-bit
8 gigs DDR3 Gskil
AMD Phenom II X4 955 Denab
Nvidia GeForce GTS 250 (x2 SLI)
Asus M4N75TD nForce 740a Malwarebytes Antimalware
my pc used to freeze after sleep or hibernate, now, it freezes after restart or just turning it on.
View 5 Replies View RelatedI have a Lenovo ThinkPad T400 running a fresh install of Win7 Pro x64 with SP1. I did the clean install as normal, getting necessary drivers from Lenovo and leaving the rest to Windows. In the past this has worked well.
This time I am having an issue where resuming from sleep or hibernate takes longer than starting the system from shutdown. Looking at the event logs it seems to be driver related. I open the lid, press the power button, and I get nothing other than a power light, no HDD access light as usual. This usually takes quite a while. Once I get to the logon screen, it is unresponsive to both password and fingerprint reader. It sits like that for a while and than after logging on everything works fine.
The machine has ran Norton Internet Security 2012 from day 1 and I have no reason to believe that this is malware related.
I have saved the "Diagnostics-Performance" section of event viewer an EVTX file which should be attached to this post. It will open in event viewer.
EDIT: It says I am not permitted to upload this kind of file? I have uploaded it to MS SkyDrive instead. [URL]
Lenovo ThinkPad T400
Win7 Pro x64 SP1
Intel C2D T9400
8GB RAM
Crucial M4 64GB SSD
500GB Secondary HDD
14" WXGA+ 1440x900
Switchable Intel/ATI Graphics (ATI disabled)
For the past few days Windows refuses to shutdown. Everytime I select the sleep, hibernate or shutdown options it will reboot/reawaken straight away. I have tested the RAM which had no problems, I reinstalled Windows completely which didn't help & I checked power settings in BIOS to disable auto-restart. Laptop works fine when on, just refuses to power down - only holding the power button will get it to stop doing anything!
View 9 Replies View RelatedBSOD on an Acer Aspire 5750. It is pretty much brand new, but I have been trouble shooting this for about 3 weeks and have just now learned about the dmp files but am not yet good at reading them.
BlueScreenView seems to point to some kernel exe that is at the very core of Windows 7, but from what I have read it is most surely a driver as it only happens when waking up from sleep.
whenever my laptop is in sleep it goes into hibernation after a period of time.. the only problem i have with this is that the hibernation feature freezes my comp due to a known issue that has no drivers yet.
So just give me the steps.
Not sure this should go here; i only have "normal" sleep on my Thinkpad, hibernate or hybrid sleep doesn't work : Screen goes to sleep but if i move the mouse i see nothing happened (i'm on the lock screen).
View 4 Replies View RelatedI have seen a lot of these topics around, but I can't see to find any that answer the question.
Windows 7 will will shutdown if I hold down the power button, however it will not shutdown when manually hitting "Shutdown" or just pushing the power button once. Everything looks normal when it's shutting down, it says it's shutting down. The lights on the case and fans go off, the fans shut off, yet a few seconds after the fans shutdown completely, the computer magically starts back up again. So it does shutdown (technically, all the signs are there) but it starts back up.
Aside from the shutdown feature not working, sleep doesn't work (I don't use hibernate because I don't want to waste SSD write cycles). When I put the computer into sleep mode, it shuts down the fans and lights, however just like the shutdown issue, the computer powers itself back on (wake on LAN is off). Even though it is powered on, it isn't out of sleep mode. None of the peripheral devices work and I can't get the monitors to turn back on, therefore I have to hard boot the computer by holding down the power button. When I turn the computer back on, it is back where I left it before I put it into sleep mode.
I have a curious problem with sleep mode on my Win7 build. These issues are usually traced to needing an updated driver for the video card, but I have the most recent one and it didn't make a difference.
My system specs can be seen by clicking on More Information under my avatar, then Member Configuration. Win7 on an SSD on an Asus P7C55D Deluxe.
When I select "Sleep" from the shutdown menu, the system does go into what I usually see for sleep mode. It powers down the monitor and the moving drives, and the power light goes into a slow blink state. So far, normal. If I press the power button to come out of sleep, drives spin but the monitor does not come on and I can't do anything. Not what one wants, but not unusual if there are drivers or hardware that do not support sleep mode.
Then I pressed the hard-reset button. BIOS started as expected, but when it came time to start Win7 it restored the last session state, as if coming out of hibernate. That's unexpected: It went into the sleep state, but also wrote out hiberfile.sys. Or was that "it hibernated, but also went into sleep state?"
And Hibernate does not appear on my Shutdown menu as a choice. So for a while, I would select Sleep, cut power, and reboot. Recently, I assigned the Hibernate function to the power button, and I get a clean Hibernate when I press that button.
how I can get true Sleep mode? This same machine does true Sleep mode in XP if I boot my XP drive, with the same video card and even the same ancient SCSI card.
I am currently experiencing a BSOD after I put my computer into hibernate/sleep mode. Model: U46E-BAL6 ASUS, After I restart my computer, the windows crash report says the problem lies in my 080712-18283-01.dmp 080712-18283-01.dmp and a 2nd BSOD happened a little after, and the problem file is 080712-16395-01.dmp 080712-16395-01.dmp I have attached both files below, could someone take a look and solve the problem?
View 1 Replies View Related
