Change Windows 7's Start Screen?

Mar 18, 2011

My new laptop always opens Win7 (when I turn it on) to the disk directory page. How do I make it NOT do that?

View 1 Replies


ADVERTISEMENT

Change Scheduled Start To Windows Start

Oct 18, 2012

I have Windows Ultimate (x64).I use the Asus Suite II supplied with my Asus Asus P8Z68-V Pro Gen3 Motherboard (which I like for fan and temperature monitoring) Ai Suite II always loads BUT "on screen" it is messy during loading because a seemingly AI Suite bar sized white artefact appears top left of screen for 10- 20 seconds before disappearing when the AI suite icon appears in the notification tray. Sometimes a white square also appears temporarily.I have noted that if I exit Ai Suite II and reload via the Asus AI suite supplied Shortcut I never get these artefacts AND the suite loads instantaneously (I note however Asus uses AI Suite II.exe via the shortcut but via the Asus installed Task Schedule it open via "AsRoutineController.exe -open"I have also tried unloading AI Suite II and AsRoutineController.exe and loading AsRoutineController.exe and it too loads cleanly and almost instantaneously.

1) Why does Asus use the Task scheduler instead of loading via the normal Windows Startup procedures?
2) Could it be so each can be easily disabled if required) and is that the ONLY reason?
3) what is the -open switch in the command line?
4) Is there ANY good reason why I should not disable the AI Suite II in the Task Scheduler and add it the the Normal Windows Startup applications I use the Free version of Startup Delayer as it has served me wonderfully with my current Win 7 O/S (and my previous XP) in ensuring all desired Notification Tray Icons display EVERY time).

Today I PROVISIONALLY made the change and AI Suite II opens cleanly (as other Startup apps) without temporary white artefacts and with no noted side effects so far. I am nervous however, to make it permanent without advice from knowledgeable Seven Forums members on this subject

View 1 Replies View Related

How To Change The Screen Resolution In Windows 7 When It Is Not Allowing To Change

Oct 3, 2011

i'm not able to change the resolutions in win 7

View 1 Replies View Related

Windows 7 Hangs On Start Screen And Cannot Run Start Up Repair

Nov 3, 2012

My dell n5030 laptop isnt getting past the windows start up screen. It boots up fine up to the part where the four balls become the windows logo, but then freezes there everytime. When i try to select the windows start up repair it blacks out the screen and I cant do anything.

I know its not a faulty hard drive because its newly fitted and this problem occured previously on a different hard drive aswell.

View 6 Replies View Related

When Reboot, The Screen Eventually Goes To A Black Screen Saying "Windows 7 Failed To Start?

May 12, 2012

My wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.

If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.

View 9 Replies View Related

Black Screen After Windows Start Up Doesn't Go To Login Screen

Nov 12, 2011

I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.

View 1 Replies View Related

How To Change Start Up Sound In Windows 7

Jan 16, 2010

I have a 64 bit OS and I recently upgraded from Vista to Windows 7. In the sound menu of Win 7 you have a choice "Play Windows Start up Sound", check box. If unchecked no Start up Sound. I would rather have my own sound and when I searched the web I found a program which opens up the "dll" file to change the sound, "ResHack". When I tested the sound I wanted to use it played but on rebooting my computer it went back to the Windows 7 default sound. Microsoft really bugs.

View 9 Replies View Related

Change Name Of Start Button In Windows 7?

Nov 5, 2012

change name of start button in windows 7?

View 2 Replies View Related

Change The Color Of The Start Bar In Windows 7 Basic

May 4, 2012

i tried windows 7 basic , in short i disabled the aero skin (i was able to change the color to black)

now can i change the color of the bar? for example black?

View 2 Replies View Related

Windows 7 Will Not Start Or Reinstall After Motherboard Change

Sep 11, 2011

My motherboard died on me, and so I had to change it together with the processor and RAM as there were no socket 775 motherboards available locally. However, Win 7 blue screens every time on start up, but very briefly, so I can't see the error message.

Win 7 repair then kicks in, but finds nothing wrong, so it goes round and round like that ad infinitum.

All the repair methods I have found require that you work within windows, which is patently stupid if you want to repair because you can't get windows to work - it's a bit like trying to open a box with a tool that's inside it!

I tried a new install, which has backed up my old Windows as Windows.old, and it goes though all the paces, but then refuses to accept the activation code.

I am now stuck with a non functioning PC, and am scared to add anything in the future in case of this type of thing.

View 9 Replies View Related

Change The Windows 7 Start Button Color?

Apr 25, 2012

So is there a way that I can change the color of the blue orb? also can I change the glow color too?

View 1 Replies View Related

Windows 7 Will Not Start Could Be Hard Or Software Change

Jan 5, 2013

I have tried to log into my Dell Inspiron laptop this morning and get the message as detailed above. It gives me 2 options launch startup repair or run windows normally neither do anything. I've tried running in safe mode and it takes me back to the same screen.I have the original OS disks from Dell etc if I need to reinstall, but just don't know how since I can't get past the same screen.

View 2 Replies View Related

Start Up Windows 7 Screen And Then It Freezes On This Screen?

Nov 4, 2011

Acer Aspire AS5741-5763 15.6" Laptop (2.26 GHz Intel Core i3-350M Mobile Processor, 4 GB RAM, 320 GB Hard Drive, Super-Multi Drive, Windows 7 Home Premium 64-bit) Mesh Blackmy acer laptop gets to the start up windows screen and then it freezes on this[URL]his is a picture of how it freezes)

View 5 Replies View Related

Windows 7 Start Button And Font Change Sharp?

Dec 2, 2012

I am facing problem in my Window 7 display due to my kid accident click the setting change (I don't know how they change) that cause the "start" button change from icon to the word "Start" with window image, also my font seem to be smaller than previous, did any senior can help me to restore to the normal view

[url]...

View 2 Replies View Related

Windows Failed To Start / Recent Hardware Or Software Change

Feb 21, 2013

when i am formatting my laptop with windows7 usb drive it completed 85% and after that i am geeting the below error: windows boot manager windows failed to start. A recent hardware or software change might be the cause. to fix problem:

1. insert your windows installation disc and restart your computer.
2. choose your language settings, and then click "next."
3.click "repair your computer."

if you do not have this disc, contact your system administrator or computer manufacturer for assistance.when i click on enter it go to another window where it shows us to press F8 but when i m pressing f8 it goes to same error window.

1) when i restarted it start with dell logo i press F2,F12,F10 all three i have press to open bios setting but nothing works it will go to same window so now i a not able to get into windows bios setup

2) i tried to format it again as my dvd writer does not work so i tried with usb when i restarted my laptop it does not load the files and agin redirect to the same error window.

View 2 Replies View Related

Windows Failed To Start, A Recent Hardware Or Software Change Might Be The Cause

Oct 4, 2012

I am currently using a different computer to ask for help, Everytime I startup my computer it says "Windows failed to start. A recent hardware or software change might be the cause. Of course, normally their is Launch Startup Repair, And Start windows normally. If I press enter on either of those it says "windows is loading files" It does that twice with a white bar then returns me to the same screen with the same 2 options. It is the same problem no matter what, I have tried pressing enter on startup to go to safe mode, but safe mode does the exact same thing. I tried going to the system recovery page, it does the same thing, cannot access anything on my computer. But, if I enter on Star windows normally twice, it does indeed say starting windows, then back to same screen first time, Then second time it will go to Aptio setup utility-Copyright (c) 2011 american megatrends, inc. It has the Main, Advanced, Security, Boot, Exit options with computer specs, product information so on so forth. I have absolutely no idea what any of these do, so I usually exit and again the process repeats, I go back to the 2 options, they either bring me to that Aptio Setup page, or back to the same page. It's frustrating that I cant use system recovery since it goes to the same page and Startup repair wont work, I have absolutely no idea what to do and am in need of serious help. This problem occured when a windows thing popped up saying "A virus may be on your computer" generally I clicked it, my computer shut down automatically and thats what started this whole repetetive process.

View 9 Replies View Related

Windows 7 64-bit Failed To Start A Recent Hardware Or Software Change?

Jan 10, 2013

After a power failure my windows 7 system will not boot....tried startup repair 3 times also from the dvd. all safemodes will not boot, when the windows animation starts the cpu restarts. also system restore to an earlier time fails.

View 2 Replies View Related

Blue Screen At Start Up, Wont Start At All?

Feb 25, 2011

using windows 7, have a blue screen at start up issue, memory dump. Sadly the PC wont start so unable to try too much, it lets you select user, attempts to ,log onto the user then just goes to mthe blue screen and starts the cycle again. It will not start in safe mode either, basically the same result although sometimes it loads and you are in but when you try to do anything it goes to the blue screen again. I did get the error code (not always the same on the blue screen but this one comes up most time), "driver IRQL not less or equal"

View 2 Replies View Related

Windows 7 Fails To Start - Recent Hardware/Software Change Message

Jan 7, 2012

I'm running Windows 7 64 bit on a gigabyte ga-x58a-ud3r

A few weeks ago, I shut down my PC completely for a regular cleaning. I do a regular cleaning once a month, this was the first time I had an issue.

After I finished, I powered up the machine, and Windows would continually fail to start - rebooting at some point while the Logo load screen was up.

After several Google searches, I tried pretty much everything I could think of or advice i came across - Nothing worked. I could not boot from the Win7 Disk, System Repair did not work, advanced boot options did not work, etc. At this point I thought the HDD might be bad (WD Caviar Black 1 TB).

So I went and purchased a new HDD, the same model actually as it was on sale. Windows installed fine, everything got up and running with no issue.

I then took my HDD which I had believed had failed and plugged it into a Thermaltake BlacX Docking station and I was able to locate the drive in the device manager after scanning for new hardware.

I actually was able to go into the hard drive and recover the few bits of data I hadn't backed up (mostly gaming files). The HDD was completely fine. Fast forward a few weeks, and feel free to laugh at me here - I'm in the exact same situation with the new HDD once again after cleaning my PC case.

So, I'm not sure what is happening. I've rebooted the PC many times without issue but today was the first time that I fully powered down the PC to do a cleaning.

I suspect something is causing Windows to fail to recognize the HDD itself, but honestly this is way beyond my knowledge how to fix. I took a risk and I removed the sata cable from the "GSata" slot on the motherboard and put it into one of the standard ICHR10 - to no effect.

I've once again exhausted every option I actually know how to safely do, advanced boot options, repair attempt from Win7 Disk, etc. Nothing is working. I'm debating running out yet again and grabbing a cheap HDD just to get myself up and running again, but I thought I'd turn to Tom's Hardware first for some ideas - and because I don't want to be going through this issue everytime I want to give the PC case a good cleaning.

View 18 Replies View Related

Screen Resolution Can't Get It To Change Back To Full Screen

Dec 9, 2008

i'm having some trouble with my screen resolution . i set it at (800x600) cause i'm using a 51 inch big screen hd tv. it go's full screen but then for no reason it puts the bars back on the sides of the screen. i checked and it still reads (800x600) and i can't get it to change back to full screen until i reboot. works fine in vista . i'm not seeing anything about drivers failing so i'm not sure what's happening.

View 5 Replies View Related

Change From The Welcome Screen To The Logon Screen, Startup?

Apr 17, 2011

I am just a home user, and am not connected to any company network. ason JasonDiv11 has chosen the best answer to his/her question.Click here to view the answer that was selected.

View 2 Replies View Related

Screen Resolution Change, Border Around Screen, Etc

Jun 30, 2012

for the past month i have had an issue where before the log in screen would show, it would be a blank screen with a cursor, that i could move. (It worked normal in safe mode) I normally would just ignore this problem and it seemed to go back to normal after a little while. Well yesterday it didn't go away, so i went online looking for a solution, in safe mode. I've read to disable/enable drivers, re-install drivers, just plenty of things. And the result of all this is that my screen resolution wont go back to normal, and there is a black border around my screen, around a half inch. Also, my computer has been running EXTREME slow lately.

View 1 Replies View Related

Program To Change The Start Orb/bar?

Aug 27, 2011

im looking for a program to change the start orb/bar however I ONLY want suggestions to programs you have used,Also i would prefer editting the registry to using a program, if someone knows how,

View 1 Replies View Related

How To Change The Start Menu

Jan 2, 2013

how to change the start menu with picture ?? is there any changer like start button changer (auto) only on click change without number....

View 2 Replies View Related

Change Windows 7 Logon Screen?

May 23, 2012

I have bought hp probook 4530s recently which came with orignal windows 7 home premium. I want to change the logon screen of windows.

View 3 Replies View Related

Change Windows 7 Boot Screen?

Jun 26, 2009

Does anyone know if it is possible (will be possible) to change the Win 7 boot screen?I have read that MS have built Win 7 so that the boot screen cannot be fiddled with, thus protecting the PC against changes more than earlier windows version have done

View 9 Replies View Related

Change The 'Starting Windows 7' Screen?

Sep 26, 2009

Is there a way to change the background image that displays during boot before it gets to the login screen?

View 5 Replies View Related

Change Screen Resolution In Windows 7?

Feb 14, 2012

I am using windows 7 in my Dell Inspiron N5010. It has native resolution of 1366x768. When I bought the laptop resolution was correct. But I re-installed the OS recently again and now is showing max resolution is 1024x768. Because of this I am getting blurred videos. how can I change the resolution back to 1366x768.

View 7 Replies View Related

How To Change Screen Size On Windows 7

Sep 5, 2011

i would like 2 know how u change the screen size on a casino game on the laptop. It's big in size & the very bottom where the screen cuts off shows the score. everything else on my laptop screen is good.

View 8 Replies View Related

How To Change Screen Size On Windows 7

Oct 18, 2012

How to shrink my laptop screen back to normal.

View 1 Replies View Related

Change A Image (Start Up, Locked)?

Oct 12, 2012

Am I allowed to change the image of Windows when the computer shut down, start up or is locked? I mean this: I want put photo's there maked on school

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved