Whenever I have tried to do the update to instal Service Pack 1 the process has always failed, giving me "error 80073712". I have tried doing some of the possible solutions found throughout the internet, including disabling anti-virus software, downloading SP1 manually and installing it on my own, attempting to install in safe mode, doing check disk, but nothing seems to work. What can I do?
View 10 Replies
I have been trying to install SP1 since Apr 2011. I keep getting the error 80073712. I have been able to install all of the other updates. I have downloaded and run system readiness tool. I have run troubleshooting/fix problems with windows update I have run sfc/scannow. I have run MS Fixit as well.
I seem to have a corrupt manifest file. My laptop came windows 7 loaded so I only have recovery disks and a recovery partition. I don't want to have to do a complete recovery and have to install all my software again.
Here is the message in the checksur file.
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 13.0
[Code]......
Windows7 can not update and download Kermel-Mode Drive Framework 1.11 for windows 7(KB2685811) User-Mode Driver Framework 1.11 for windows7(KB2685813)
View 4 Replies View RelatedI am trying to download/update the 'windows 7 service pack 1 for X64 -based Systems (KB976932) and I can't download it. What do i do?
View 1 Replies View RelatedI had the same 3 updates continually installing everytime I logged on. They were sucessful in update history but kept comming back. I ran the system rediness tool, but it didn't help. I ran the microsoft fix it soultions for windows update normal then aggressive. Now I get this error while checking for updates. I tried to run sfc /scannow and then sfc /verifyonly but get the following error: windows resource protection could not perform the required operation. I also tried to install the latest service pack got the following error: error_sxs_componet_store_corrupt(0x80073712). When I look at programs->installed updates nothing listed, also when I look at programs->turn on/off windows features nothing listed.
View 6 Replies View RelatedI am having trouble installing sp1 despite other windows updates having been flawless so far. I tried following instructions found at the Windows site but the System Update Readiness Tool didn't find any errors and repair installation aborts. Sorry to bother you with another "sp1 fail" thread but I have exhausted my search options for solution here and in other sites, which makes this request for help my last resort.
View 5 Replies View RelatedI have windows 7 pro with SP1.I'm having a problem with three updates.
KB2633171
KB2676562
KB2679255
I have installed them numerous times.I check the update history and it says they were successful. (If that's the case why are you wanting to install again? ) Now when I try to "check for updates" I get the error 80073712.I have tried Microsoft fixit numerous times. I have tried the hotfix KB947821(also numerous times) to no avail.
As I open windows update, and check for updates, after a while it gives me an error:
"Windows could not search for new updates. An error occured while checking for updates for your computer. Error(s) found: Code 80073712."
I have also tried Windows Readiness Tool, it doesn't fix my computer, I still can't check for updates successfully.
I got notification 1/9 that 14 updates are available for Windows 7 Pro, 64-bit. All installed but 1. Update KB2773072 generates error code 80073712. I have re-tired multiple times each after a system reboot. The update is RECOMMENDED not critical. I can probably go without it. It appears it is related to gaming applications. I don't game. getting the update installed?
View 6 Replies View RelatedI installed a lot of updates yesterday, except DotNet 3.5 SP1 and Windows 7 SP1, because WU gives me the following errors when I try to install such updates:
800B0100
80073712
I already tried the Update Readiness Tool and nothing.
I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error: I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.
View 6 Replies View RelatedI'm working on a client's laptop, compaq Presario CQ57, 2gb ram 250 GB HDD.
I installed a new harddrive and installed a new copy of Win 7 Home Premuim x64 After it reboots, it just hangs in the welcome screen with the Windows logo.
I reboot via Windows 7 repair disc and run C: chkdsk /r and I get this message "disc check error 766f6c756d652e63 3f1"
I'm trying to install Boris FX RED 5 trial on Windows 7 64bit. Each time I try to install it I get the following error message:'Error 1926. Could not set security for file C:Windows. Error: 0. Verify that you have sufficient privilages to modify the security permisions for this file.'I contacted Boris FX who told me it's a Win 7 error. I have an administrators account and UAC is set to off. I've never encountered this installation error before since I installed Win 7 about a year ago.I can't find an '. Error:0.' file or folder. I tried to change permissions on the 'Windows' folder but this wouldn't work.
View 3 Replies View RelatedI was installing windows with a clean install and everything went smooth.
The installation got to "completing installation" and after about 15 minutes, i heared few "beeps" from the computer (not the speakers).
the computer restarted itself and then installed the registery files...
after that, it went to a blue screen with a flower (like in the start of the install) and said: "Starting Services ".
after about a 4 seconds, it said: "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click OK to restart the computer, and then restart the installation"
when i clicked on "OK" the computer restarted it self and repeat to show the message.
i tried to redownload and reburn but it repeat it self, both 64bit ver. and 32bit ver. so it isnt a corrupted file.
i got no other OS on my computer, because after 4 years my computer started to slow down, so everyone told me to format, so i formated the computer and wanted to install windows 7 so i got no other computer to play games on (im using a old laptop right now).
can anybody help?
I took advantage of the student offer for Windows 7 upgrade!
I downloaded the Windows 7 installer and when I try to run it I get this error.
"We are unable to create or save new files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write files and that the folder is not read-only"
It is saved to the desktop!
Any suggestions?
I'm trying to upgrade my Toshiba (Satellite) Vista to Windows 7 Home Prem. edition.
Everything seemed to be going well until the end and I entered into (any) user account. Windows 7 started to prepare the user account...suddenly I get a IRQL_NOT_LESS_OR_EQUAL error...that's it...no help at all? Restarted and got the error Stop 0x000000A at about same place. Gee's, this was supposed to be a simple install now; stupid MSFT.
I have 2 other computers I wanted to upgrade but now...?
Because I have default windows 7 in my notebook, I have followed your excellent tutorial in Method #2 and almost finish installing XP deluxe version. suddenly! a Blue Screean appear in the display like this… A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUTDOWN TO PREVENT DAMAGE TO YOUR COMPUTER
IF THIS IS THE FIRST FIND YOU'VE SEEN THIS STOP ERROR SCREEN
RESTART YOUR COMPUTER. IF THIS SCREEN APPEARS AGAIN FOLLOW THESE STEPS.
CHECK FOR VIRUSES YOUR COMPUTER. REMOVE ANY NEWLY INSTALLED HARD DRIVE OR DRIVE CONTROLLERS.
CHECK YOUR HARD DRIVE RUN CHKDSK/F TO CHECK HARD FOR HARD DRIVE CORRUPTION AND RESTART AGAIN COMPUTER.
*** STOP: 0x 000000713 (OXF7802524,0XC00000034, 000000,000000 ).
i have restarted the computer, the display blue screen appear again in the same error,
Whenever I try to install the driver for my onboard sound card(Asrock C-media Ac97) the following error is rendered: I found the driver on this thread: UDA051_build01_Logo51.3_Standard_.rar (PeterBoard's post)
View 2 Replies View RelatedI have been trying to install Impulse but have been encountering the following error that aborts the installation process.
Error
Error getting file security: C:usersLaughingmanDesktop
GetLastError: 5
Is this a problem with impulse not supporting/blocking the install on Windows7, as Ive heard they block some games from windows 7, or is this an unrelated error that needs a different fix?
I have an old Dell XPS Gen2 desktop that is running WinXP. I wipped my Raid0 hard drives to perform the install of Windows7. After helping the setup see my raided hard drives, I started the install.
After the second step in the installation process I keep getting an error message that says something like: "Windows could not configure your computer's boot sequence. The installation could not continue"
Does anyone know what I'm missing? Could my bios be too out of date for this setup? or is it something else?
I've tried to install Windows 7 numerous times. It gets through the entire process and then I get a blue screen of death at the "Completing Installation" screen.
It says there is a problem with igdkmd32.sys which is an Intel graphics accelerator driver.
The thing is, when doing a search, I don't have that file on my computer at all. My only graphics driver in the system area is my GeForce 7600GS. There is nothing showing the Intel one so nothing to disable.
How can I fix this and get Windows 7 installed?
WIN 7 installs a-ok to Seagate 500GB Sata HDD when drive is direct connected to main board using SATA data and power cables. Problem is, WIN 7 fails to find the same drive when the drive is installed into a KingWin removable drive bay. Drive shows a-ok in setup (BIOS). Ubuntu or Mint Linux installs a-ok onto same drive in the KingWin removable drive bay.
View 9 Replies View RelatedI just got a new laptop and im trying to put windows 7 on it. 64bit. Everything goes well until it goes to first boot up. When it goes to first boot up after that display of weird lights on the bottom. It restarts it self and then goes to boot though vista, Which isn't there any more cause i wanted to format to get rid of blotter where. After it boots though vista it goes to a grey screen then all of a sudden a ERROR comes up in what looks like a text document.
View 9 Replies View Relatedi am trying to put win 7 onto a medion pc which has vista 32bit, i have tried doing a clean install and an upgrade but it will not run for more than one restart.one of the erorr msgs were unverified and the others are anything from system repair to the pc not booting up
View 3 Replies View RelatedI've had a few problems with my Acer desktop so decided to do a fresh reinstall.I downloaded two different copies of Windows 7 Home Premium 64 bit SP 1 (one from the Del forum, can't remember where the other was from!). Burnt one to an ISO DVD and the other to a ISO USB drive. I installed the latest BIOS.I disconnected all HDD apart from the one I wanted to install onto - which I did a format of (from within Windows 7 - the fast format).The Windows 7 install get's to the "Expanding Windows files" which sticks at 0%.I then get a error (x80070017) which says it cant extract the files?
View 2 Replies View RelatedIt gets to starting windows. "second screen of install process" then I get the Blue Screen Of Death.
STOP: 0x0000001E (0xffffffffC0000005, 0xFFFFF8000BCE9E324, 0x0000000000000000, 0xFFFFFFFFFFFFFFFFF)
Or it just resets the computer. I have tried everyting. This is a new computer built by me with the first time an operating system has been put on it.
Basically my friend asked me to install seven on his laptop for him so that it would dual boot his current os and seven. Both are 32 bit so thats ok. The laptop is an Acer Aspire 5920, and had two partitions on the laptop when I looked at it. The main one was for vista and it was called ACER. The second seemingly has no purpose and he never used it and was called DATA. So I thought that it would be easy enough, just format the DATA partition and install seven on it.
So I started up the win-7 install disc and installed it to the DATA partition after formatting it with the win-7 partitioning tools. This was ok and at the end of installation it wanted to restart and I let it. It then rebooted and completed setup. This should be it done. So I removed the disc and booted like normal, the windows boot manager came up like ususal giving me the choice of what os to boot into, so I booted into vista to check it was all right. It was. So then I decided I would go ahead and set up his user and all for him so I booted into seven. I managed to set it up and it once again (like normal) wanted to restart. So it did...
But now it boots past the bios screen and nothing appears. Even after 10 minutes nothing loads. Only a single underslash i.e. _ flashes. (EDIT: This is the BSOD!) The bootloader doesn't even appear! Just the underslash! I have never encounted this problem before and I am extremely confused as to why this has happened! I tried the install again but the same result came up.
I tried to do a repair install and it said:
Windows installation encountered an unexpected error. verify that the installation sources are accessable, and restart the installation.
Error Code 0xC0000096
Can someone help me with this problem, I want to avoid doing a full install
ive got a dell xps 1530 laptop running on vista business 32 bit ,4gb ram, intel core 2 duo t5450 166ghz and a 250gb hd partitioned into 215gb os ntfs [c] 15gb recovery ntfs [d] 2.50gb media direct fat32 [f] 134mb unallocated and 2.50gb
i want to upgrade to 64bit
ive got a 64 bit windows pro upgrade disc from software4students ,ive tried to do a custom install and get the error code 0xe0000100 ,searched the web and read up on it ,can anyone give me any advice on how to install it,ive got no addional discs as the dell came with it all as a image on the hd,got the proper licences and keys tho.
windows 7 7100 install error please help me
windows 7 7100 x86 boot dvd pc but install error message
a required cd/DVD drive device driver is missing if you have a driver floppy disk. CD, DVD, or usb flash drive please insert it now.
I've installed Windows 7 32-Bit RC1 on my desktop without issues using Daemon tools and mounting the ISO and installing to a separate partition, that's all very peachy. The original OS was Vista HP 32-bit.
Can't say the same for my laptop running Vista HP 64-Bit. Using the same method, the installer gets to about 12% and then comes with this error.
Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070241
I've downloaded more then 10 GB in the past 3 days re-downloading .ISO from both the Microsoft site and Bittorrent sites and seeing if they're corrupted. They're not. I get the same error every single time. Something else is the problem.
I tried installing BOTH the 32-bit and 64-bit inside my Laptop Vista 64 bit OS and I get the same error.
I've also unzipped the .ISO to my drive and tried installing that way. Same deal. Why did my Desktop go so smooth but my laptop is a living hell?
