I have for years used Adobe Audition 1.5 and 3.0 to extract files from CD for my syndicated radio shows. In February I bought a Lenovo lap top loaded with windows 7, and cannot do this task with 1.5 or 3.0
View 9 RepliesDuring an upgrade from XP to Windows 7 Ultimate I used Easy Transfer.Towrads the end of the transfer back to the computer from an external disk, the transfer crashed. I was able to complete the upgrade but a few files are missing.I am unable to transfer again the files.Is there a way to look into the MIG files, locate certain files and extract them?
View 3 Replies View RelatedI cannot extract files to install, what should i do?
View 4 Replies View RelatedI tried using 7-zip, but I don't have it in the menu when I right click which it's supposed to be. So I went to the series of iso files and extracted them to a new folder but 4 minutes later all the files were in just one big iso and when I tried to extract that, it said the archive couldn't be accessed. I'm not trying to make a bootable disk; I need the files within the iso and I would rather not waste DVDs unnecessarily.
View 6 Replies View RelatedMy ST3500418AS 500GB died and took my Windows 7 with it, so I had to do a fresh install to another hard disk.
Unfortunately, Backup and Restore cannot see the backup location from my previous install, so I can't get my files back that way.
I presume that the VHD file I see in the backup folder is the system image of the previous install.
Is there any way I can extract my files from this VHD using some software package, or even convert it to another format such as ISO and extract my files that way?
There's a lot of great pics and stuff there that I don't even remember where I got it from, so I'm pretty desperate to get it all back.
I have a dell xps 14 ,core i7 740qm,window 7 64bit home premium,4gb ram,500 hdd 7200rpm and dvd burner.Since the day i bought that laptop i can't extract some rar files.I have tried copying it to my hard disk and even tried make an image copy and open it in virtual drive but still no luck,it keep showing me that window don;t know how to open it.Other desktop pc DVDdrive can extract it easily.I have installed 7zip and WINRAR.But the extraction isn't happening.Since then when ever i want to extract a zipfile (which i can't extract on my laptop)i have to borrow a friend pc to extract it.
View 2 Replies View RelatedHow to Extract Files from the Windows 7 Installation DVD ?
View 0 Replies View RelatedI downloaded a torrent to my laptop, and I want to extract the files within it to put into a different folder. But the extract option isn't on the right-click menu.
View 4 Replies View Relatedhow to read and extract pbf files to windows 7?
View 3 Replies View RelatedI am a software vendor and ship files to customers that are usually zipped. When customers extract the files on their Windows 7 machine, its blocked. I have the flexibility to run a command after the extract; is there a batch command to bulk unblock the files? I tried takeown and icalcs /grant but the unblock still shows up
View 5 Replies View RelatedHow to Extract Windows 7 System Image Files Using Disk Management ?
View 0 Replies View RelatedMy font collection is in need of a radical overhaul. I use High Logics Main Type as my font manager. But that's by the by, this isn't about fonts solely. I've come across the situation where I need to collect all the files together from multiple sub folders before. I want to know the easiest way of extracting all the data from, say, 500+ sub folders, and dumping it all in the parent/a.n.other folder. At the moment, with fonts, it's a piece of pish, I search for ttf files in the main folder with locate32, highlight them all, cut 'n' paste into the new folder. I then use RED 2.1 to delete the empty folders, go back into the parent folder to see what folders are left, open one, get the file extension, use locate32 to search for file extensions in parent folder, and so on and so forth. Easier to do than type, but still a bit long winded. Does anyone know of an easier way or a 3rd party portable app.?
View 2 Replies View RelatedAnyone know how to extract the bookmark stored in the browser?My previous laptop died on me.I have transfer the hdd into an external casing
View 1 Replies View RelatedWhen I try to extract Sony Notebook Utilities, BIOS update, and other things, this stupid error keeps popping up.
Can anyone be kind enough to download the drivers, extract them, and reupload them for me? I have tried all of the extract options and none of them work.
http://esupport.sony.com/US/perl/swu-download.pl?mdl=VGNSR490&upd_id=4792&os_id=36#
http://esupport.sony.com/US/perl/swu-download.pl?mdl=VGNSR490&upd_id=4618&os_id=36
I can't use the .exe provided because it will only install on the Vista OS, extracting it would bypass this check and force install.
Picture of the error: http://i29.tinypic.com/fmjcdl.jpg
I've got an Epson printer where the only driver is one that came with Windows 7 X-64.
There hasn't been a driver for this printer since XP from Epson BTW - an A3+ size Photoprinter 1290.
There weren't even any VISTA drivers from Epson - but I skipped VISTA anyway. The printer is STILL good and I like the occasional A3+ size prints so I don't want to get rid of it -- newer printers are usually A4 max unless you spend serious money. And if a device is still perfectly functional why should I junk it.
Is there any decent tool to extract the driver out of a running Windows 7 system and install in Windows 2008. In theory it should be possible.
Otherwise Windows 2008 server seems to run anything Windows 7 X-64 does.
is it possible to extract a .exe file or a installer instead of installing it on the HDD ???
View 3 Replies View RelatedA few months ago I went on a rampage (stupidly) trying to get rid of TuneUp Utilities. I'm not sure but I believe it was during some registry cleaning-up that I must have screwed something up.Ever since my System Restore hasn't worked right, I've not bee able to have a successful system restore since.Wasn't an issue until now when I very much want to restore. (I uninstalled Steam and I'm hoping a restore will reverse that so I don't have to download my game library again.)I tried to restore to a point created yesterday and got teh same error I've been getting:Quote:"System Restore failed to extract the file(C:$Extend$RmMetadata$Txf) from the restore point. An unspecified error occurred during system restore.(0x80070005)" I've been trying to research the problem but have heard everything from "It's Norton!" (I do not run Norton nor have I ever) to "Unplug all your USB devices" to "Your accout doesn't have proper permissions."Does anyone know what this actually is and if it's fixable without formatting the system?
View 2 Replies View Related"extract all" is a standard context menu command in windows XP, Vista and 7. But this command seems to be overriden when one uses PowerDesk, replaced by the PowerDesk Zip/Unzip utility. I would like to have the option of the original windows command back in the context menu, but don't see any way to restore it.
View 5 Replies View RelatedHow to extract from rar and maintain original folder dates? have a memory stick which I need to copy to other USB stick with original folder creation dates. I have created a rar from original USB stick with original folder dates but when trying to unrar, there always folder date is changed to present one.
View 1 Replies View RelatedI have WinRAR and have extracted Windows XP Professional ISO file which I downloaded from school's MSDNAA's web site.
But I can't seem to locate one. Is there a way to obtain Windows XP equivalent (not 3rd party applications) of Hyper Terminal to use it for Windows 7 Ultimate x64?
My friend installed Windows 7 Home Premium on her laptop. Her previous Operating System was Vista, which was factory installed. Every file she had on Vista was put into a folder titled Windows Old after Windows 7 was installed; we both knew this would happen so my friend backed up some files.
This laptop, an HP Pavillion dv6700, has WiFi capability. The problem is the software/ drivers for this are in the folder Windows Old and can't be opened and used. Is there a way to extract these files so they may be used again?
I have a problema with windows 7 professional (64 bit, sp1), and offline files.I'm trying the functionality of offline files with a NAS network (WD my book live).Specifically, I do not want to synchronize files with certain extensions (.nef and .cr2). With gpedit.msc in Computer Configuration -> Administrative Templates -> Network -> Offline Files, I enabled "exclude files by caching", entering (in the appropriate field), *.nef; *.cr2 But the files with this extension are synchronized anyway.
View 1 Replies View RelatedI have my tower pc on constant all day- to record a streaming IP Camera from my work.Initially, I saved these files into my docutments- which they would save as .avi files, and after every several days I would delete them as they would take up ALOT of space on my pc.My pc is 250GB in size, and usually it would be about 80GB full before I had the IP Camera. Just recently, I noticed all of the IP Camera avi files seemed to have disappeared from my documents if I went directly to the folder... I could still see them in documents when I was choosing a location to save the recordings.Upon right-clicking the avi files in the latter, the files would be of no size and wouldn't play.Now my computer is 210GB full in the matter of a week.
View 1 Replies View RelatedMy wife has Windows 7 home premium x64 on her laptop and is using Word 2007. The problem she is having is she will open a word file, change it up, save it, then re-open it later and its the old file not the new one. Where as I can open the edited file on my desktop running the same OS but with Word 2010 and the file that opens for me is the newest version.
View 3 Replies View RelatedMy offline files seems to work offline all the time, even when it shows me being online. I sync most of my business files to my laptop for working at home at night. When I edit a file from my Win 7 (pro, 64-bit) laptop, then go to edit it again, I get the version I had changed, but no one else does. This is causing huge difficulty, because my employees will start working in a sales forecast spreadsheet after I reconnect to the network and supposedly sync, but they don't get the latest version. Even doing a manual sync seems to make no difference.
View 2 Replies View RelatedI have a system with 32gb DDR3-2400, a 256GB SSD and a couple of spinners. I have set up 4gb of the RAM to be used as another RAMdisk using the softperfect software. This problem has been going on for some time, but has been more of a problem since I started using the RAMdisk. Not because the RAMdisk itself isn't working well, because the stuff that is stored there keeps getting reset.I have pretty much identified that when updates are installed through windows update (either from Microsoft update or from my WSUS server), the following are reset to defaults
1. Pagefile is automatically managed and stored on the C: drive and is set to 32gb
2. The TEMP and TMP environment variables are reset to the C:users default location
3. The temporary Internet Files location is reset to the default C:users... location
There may be others that I have not discovered.I have manually set my swap file to 1024/2048 on the D: drive (a spinner), on the belief that it should rarely if ever be needed with a system equipped with 32GB of RAM. I'm certainly not inclined to waste 32GB of space on my SSD for an unused object.I have placed the TMP/TEMP files, cookies and Temporary Internet files on the RAMdisk to squeeze a little extra performance out of the system. (Yes, I know, I'm not really getting much benefit).Photoshop and a few other programs also use the RAMdisk as a scratch disk, and were the main reason I set it up in the first place.This is becoming a real pain when it gets reset as I have to manually change everything again. Anyone know a way to make windows leave settings at what I set them, instead of having it continually reset the values to what it wants? I'd prefer to have it my way. I know there will be proponents of "leave things as windows wants it".
Is there a way to make SFC use the Windows 7 DVD for files to be replaced instead of the files on the hard drive?
View 9 Replies View RelatedI didn't used to have this problem before. For some unknown reason, all my video files have a separate PNG file next to it with a picture of the thumbnail. I don't remember changing any viewing options that may have triggered this.
View 2 Replies View RelatedI have likeimg0000.pngimg0001.pngimg0002.pngtcup tp 5000Do you know a program which can search for missing files in this row?
View 3 Replies View RelatedGreetings Again,
My file and storage system is set up like this:
C: Drive - 120 GB SSD This is my Win 7 64-Bit Ultimate Boot drive. It has my most important Microsoft programs on it. Out of the 111GB available, I've used 42GB, leaving me 69GB free space. I want to keep this area open.
My next drive is a 1TB WD Caviar Black segmented into 3 partitions.
E: Drive = Program FIles This has the majority and rest of my programs. It also includes USERs Files. I've use 96GB out of 150GB. Out of that 96GB, 64GB are in USERS files.
F: Drive = Data Files. This stores all of my data except for media. I've used 91GB out of 350. I want to leave this be.
G:| Drive = Medsia FIles This stores all Media = Vids, Music, Graphics, Pictures. I've used 80 GB out of 500GB
I also have a 64GB ~ 55GB actual storage SSD drive that is partitioned but has no data on it or assigned drive letter.
Here is what I want to accomplish. i want to move my actual Program FIles to the 64GB SSD, assign it a drive letter, and keep the USERS files where they now reside on the F: dirve
My main concern is that in moving all these files around and splitting the USERS files from the Program Files that I'll mees up my Registry. Will someone please suggest some links I might read that will best help me acheive these moves.
I'm running Windows 7 Professional 64-bit and having the same problem. You can easily resolve the "Hidden File" problem by right clicking on the file, select Properties, and remove the check box next to "Hidden". If you tagged all the photos in a folder, simply select all (ctrl-A) and do the same. It solved the hidden file problem for me without having to show all hidden files.The problem I'm running into that I can't fix is that even after doing this, Carbonite now recognizes these files as system files and refuses to back them up. Even if you try to manually force Carbonite to back them up, it immediately unselects the check box. Hopefully somebody knows of a solution. It's weird, because I was tagging photos just a few weeks ago, and didn't have any problems at all. I don't know if there was an update at some point that screwed this all up.
View 1 Replies View Related