I just downloaded Outlook hotmail connector from the official download website, and installed it to try, and explored it , it was working fine!After that I deleted the account and reconstructed it using pop3 conf., but didn't like the idea of no status update reflect to the webmail , inally decided to use the IMAP Configuration to have the features of the connector which I tried First,I deleted the pop3 account to return back to the connector configuration, the config. done successfully, but when outlook start it fail to pass the receive process , and produce the following errors:x8004102A , x80041050 after restarting the outlook and trying again send/receive, the receive process comes to no end. until errors appear or cancelling it.I just noticed that it restored the contacts, drafts and the folder structure on of my account from the first ever imap account which I created ( and deleted ) at the beginning .By the way I deleted the first imap account fromoutlook and from the C:UsersXuserAppDataLocalMicrosoftOutlook ,,,,
Pop account emails show up in sent folder as properly sent with time and date sent.They aren't going anywhere. Have sent tests to myself to no avail.Also emails sent thru Gmail IMAP never make it to any sent folder in Outlook and I get an error message stating that the server will not allow sent emails to be placed in the Outlook sent folder.
I'm using OL 2010 with Windows 7 Pro x64. I have this problem of OL not syncing all my imap accounts. I have various imap account for different purpose. One for reading tech journal, one for ebay and so forth. Right now, I will only see there is incoming mail when I click on it. Once I look on the folder once then I will see new mail w/o having to click the account to see new mail
I haven't discovered a way yet of switching a POP3 account to IMAP without deleting and re-defining the email account in Outlook 2010.IMAP is a better way if you access the same email account from multiple machines. If the account was originally defined with POP3 there doesn't seem any mechanism to change it to IMAP without deleting and re-creating the entire account.
This means backing up and restoring all the messages, address books etc before doing this -- a bit of a pain if you have to do this for 50 - 100 users and their email accounts.
I had configured Outlook to collect email from three IMAP accounts and all worked well for a time (about a month). Suddenly, Outlook started displaying "unable to synchronize folders" and stopped collecting emails entirely.
I am using both a laptop and tablet to check email I have set up both devices with imap accounts.
The issue is that I don't want to lose all my old folders and email from the old pop3 account and I can't find a way to move or copy them to the newly created account on my laptop so I'd like to leave the old account, inactive, in Outlook.
Also, I don't want to get messages into two different folders. Is there a way to disable the old pop3 account without removing it?
I have tried deleting the password so it won't send/receive from that account but all I get is the constant "enter password" box which is naturally not an ideal state of affairs.
PS it probably isn't relevant but FYI the tablet is a Motorola Xoom Android and the laptop is an Asus running Win 7 Home Premium and Outlook 2010 as in the subject line.
I use Outlook 2010 to process several email accounts. I noticed a few days ago that a couple of the email accounts had vanished from the list. I also noticed that one still present was not sending or receiving. I tried re-entering the password and when that didn't work I deleted and re-entered the account. It tests fine but the test message never shows up in my Outlook inbox. It does show up immediately on my phone when I check my mail there.
After pressing "send/receive" pretty often my Outlook 2010 stops responding, blue ring is spinning and if I click anyplace I'm getting "fog" over screen. When I want to close program, Outlook offers to find fix or restart or shut off, if I choose fix it is searching and after while is restarting program. I have talked to Microsoft techs, they checked, everything was fine, and suggested to restart Outlook if it will happen again. I do not think this is the way how Outlook 2010 should work.
I'm using Outlook 2007 and an IMAP server through Godaddy (which I am quickly disliking after many years). I run several accounts, two of which are IMAP (the others are POP). This morning, all of a sudden, the previously retrieved messages on ONE of the IMAP accounts no longer appear in Outlook, despite being on the server -- I can see all of them via webmail. There is only one folder - the Inbox. The other IMAP account still functions normally (which is also through Godaddy), and all my saved folders that reside locally all function normally too -- none of that mail is gone as best I can tell.
I can receive new mail without issue, and send mail as well, but cannot access the old mail via Outlook. I don't get any error messages, I haven't changed any settings, and I've run Microsoft's "Outlook 2007 Inbox Repair Tool" - SCANPST on all my PST files. The tool found errors in all the files, and it repaired them, but that has not changed a thing.
My glitch is I am also trying to install Office 2007 on my NEW win 7 machine. It installs fine and everythiung looks right except that I can't use the "Send/Receive" function. I set up the mail box and even tested it within the set up wizzard. I worked fine, but I can't send or receive in the Ofice application. I get an error mesage: "An error occured. An object could not be found. I reinstalled Office a few times and nothing is missing. Does this maybe have something to do with having the Office 2010 starter app that came with the machine on the machine but its not installed/activated. What module does "Send/Receive "use so I can search for it and install it if missing.?
I've been trying to create a Task in Outlook from a Word Document that I have created on this computer. The idea is that a shortcut to the document is created as an Outlook Task. Click on the shortcut, and voila - there is the document.The "Create Microsoft Office Task" icon DOES send the document to Outlook as a Shortcut in a Task, however, when I open the task, Outlook says:"Outlook blocked access to the following potentially unsafe attachments: Shortcut to 'document name'."It's NOT an unsafe attachment; Outlook WILL OPEN this document if I send it as an email attachment. Outlook will open .docx files types.
I am trying to move one pst file from one laptop which has Outlook 2010 32 bit to another laptop which has Outlook 2010 64 bit installed, steps taken 1) Copied the pst file from the User/AppData/Microsoft/Outlook folder to usb. 2) Pasted the file from usb into User/Documents folder. 3) Tried to open the file in Outlook and I get the error that Outlook encountered errors while opening the file. Now how is that possible when the file is working perfectly in one laptop but when I copy and paste it into another it gets corrupted? Is it due to 32 bit to 64 bit outlook? I tried to repair it using scanpst and it brought back few mails?
I have a new Dell Inspiron 14Z running windows 7 pro 64bit and i'm using Microsoft office 2010. I'm trying to retrieve archived emails that i backed up on an external hard drive from a previous computer, the files are .pst which is an outlook format but i keep on getting an error message saying the file is not an Outlook data file (.pst). i dont have any other way to retrieve these emails since they were deleted from the server and its about 1.5 years of work emails. Not sure what to do? should i move the files from the external driver to a different location on the computer and open them, or are they corrupted and need to be fixed?
I installed Microsoft Office 2010 but what is send/receive? Does that mean if I click on it. The emails in my draft will be sent? Or I just receive the latest emails into my account?
I have problem with my outlook ; newly when i start my outlook it start to send /receive so it crash during receiving & my outlook will close & this circle will continue so please attend to the error
I just installed Office 2013 and decided to give the updated Outlook a fair try. I'm coming from using Thunderbird as my main e-mail program.
I have 10 gmail IMAP accounts setup in Outlook, using to be what I believe are the default settings (I haven't changed anything in any of the accounts). I am not working offline, and I have Outlook set to send/receive every 10 minutes.
In Thunderbird, anytime a new e-mail message is received, it is automatically downloaded and I get an alert sound.
However with Outlook, in order for the e-mail to be downloaded, I have to click on the Inbox of the respective e-mail account in order for it to be automatically downloaded.
This isn't an e-mail account problem because I immediately receive new e-mails via IMAP in Thunderbird and on my phone.
when I click Send/Receive in Outlook 2007 it fails and I get an Error message - 0x80040600. I've tried running the Repair Tool in SCANPST.EXE but this doesn't help, it states that all errors have been fixed, but then I still get the error message. I'm not running Exchange.
I am in the process of assisting some users in switching from Win XP/Office 2003 -> Win 7/Office 2010 and have hit a roadblock. I have a user that has an excel macro that opens an ADO connection to a SharePoint and grabs a record of the excel files on the SharePoint. The macro works perfectly on XP/2003 and XP/2010 but fails on 7/2010.
They are using this connection line: Code: davDir.Open "", "URL=http://SharePoint/Directory/URL", _ adModeRead, adFailIfNotExists, adDelayFetchStream Set davFiles = davDir.GetChildren() Once they have the record they iterate through each Excel file on the SharePoint to open and parse them.
On Windows 7/2010 I get these errors when it gets to the davDir.Open line:When they error trap it throws this error:Quote: Object or data matching the name, range, or selection criteria was not found within the scope of this operation. Without error trapping it throws this error:Quote: Run-time error '-2147217895 (80040e19):Automation error I can connect to the SharePoint fine via IE or File/Open in Excel 2010. I have tried every variation of the URL I can and I just keep getting the same error.
outlook error 0x80042108b I can recieve mail from this server but not send any mail I have just set up this new work account, the rest of the poeople in the office can send and recieve ok I have uninstalled Macfee software but still no joy
i am running windows 7 64 bit i have microsoft office 2010 minus outlook, so i have just bought outlook 2010, installed it,but every time i try to open now i get a pop up saying the server is unavailable?
I'm running Windows 7 Professional 64-bit and Microsoft Home and Office 2010. Everything was working fine yesterday, but when I came back to work today and attempted to open Outlook 2010, I instantly received a message saying: "Outlook failed to launch in safe mode. Do you want to start repair?" If you try to open it again, it opens a second process of OUTLOOK.EXE*32 in the Task Manager. Here is what I've already tried to do while troubleshooting:
- Restarted the computer - Performed a MS Office Repair, it completed, rebooted (Did this twice) - Uninstalled MS Office 2010, rebooted, reinstalled it, rebooted, but same problem occurred - Verified that the other Office programs work (Word, Excel, etc) - Tried to run "outlook.exe /resetnavpane"
I'm currently stumped at the moment. I cannot even access the profiles through Control Panel > Mail.
Outlook won't send emails. I get "sending reported error (ox8004010f): The operation failed. An object could not be found." I see other has had the same issue
There are a lot of questions about this and none of the proposed solutions seems to work for me. Now that MS has moved on to the 2013 version of the software, it still does not work on 2010. What did people do? Here is the problem have a .pst file from Outlook 2007 on an old computer. I want to use that same .pst file on a new computer running Outlook 2010. I want all my new mail to go to the old .pst file and nowhere else. Now here is what I've tried and what seems to happen:When starting O'2010 it needs your email address. I create that but then it creates a new .pst file named myname@mydomain.com.pstAnd it creates it in C:/Users/myname/AppData/Local/Microsoft/Outlook. If I try to move the new .pst file to the folder entitled C:/Users/myname/Documents/Outlook Files, then when I restart Outlook it recreates the deleted .pst file back in the AppData folder
I have just completed transfer to a Solid State Drive using a clean install of win 7 and all programmes etc.Everything appears to be running well but I need help in restoring my Outlook account. On first starting Outlook on the new drive I was asked to set up an account but obviously don't want to end up with two of them so I backed out.I do have my original .pst file backed up to a memory stick.
I`d like to know how to backup the outlook :contacts,emails, archive. I try this way ! File/open/export/export to a file/Outlook data file( pst.) browse location/Select Folder to Export From/etc.maybe i did wrong!I have 8 gb to backup and the is a sign said that icant backup more then 4 gb .
I do not get a Page set up dialog box when I click Print - only a Print Options with Properties that if you change gives a message saying that some of settings changed may not work in Outlook and to use the Page Setup dialog box