I have Windows 7 x64 Pro. Well I have been going fine with my Sony DCR -PD170 firewired to my PC. I plug it in and it pops up asking me if I want to the whole or part of the video and so on. Then I let Windows Update load the SP1 service pack and it will not load. So I go to my laptop that is Windows 7 HP x64 that also went to SP1 and it works! So I look at its drivers and they are "msdv.sys" & "ksthunk.sys". I try copying them to the same local in the desktop and no good. I try other folders like windows, Sys32/drivers/ and so on but to no avail. I even direct it to them on my desktop.
I have just tried to upload some video from my gs75 camcorder to my computer. The computer shows that the camera is connected but only for webcam. I tried installing the software but it is not comaptible. Is there a driver out there that I can get to make this camera work with Windows 7?
I could not detect the camera in my notebook. The mess age that appears says that I need to install the driver. But I could not meet the correct driver.
Have a new camcorder, the videos from which I wish to record on a DVD for posterity and sharing.Apparently there are several modes that my PC asks about before making the DVD.I read, somewhere, that for the "best" pix quality, you should tell it to make a "Data Disk," and not one of the picture options.
i have an old-school Sony DCR-TRV103 camera that has digital recording on hi8 tapes. I'm trying to transfer the videos from the tapes to my laptop. One laptop is running Windows XP with a firewire port and the other is an ultrabook running Windows 7 (usb ports only).I'm looking for the most inexpensive way to be able to transfer videos to the laptop. As far as I can tell, the video camera only has a firewire out. I have tried connecting the camcorder directly to my windows XP laptop, and am able to see the camcorder, but I am unable to get the video playing.Is there someone who can tell me step by step how to transfer the video and what the best laptop to use for this?
Win 7 Enterprise, 8Gb RAM, 1Tb HDD, AM3+ processor running at 4000, 3 port firewire card, 2 monitors, the graphics system runs DX10 no problem, 8 1Tb usb HDDs running from powered hub. I have 3 camcorders all using the same video cassette type (Canon, Panasonic, Sony). I can see each on the devices and printers window and the IEEE 1394A devices are reporting no errors. Have tried each separately, all refuse to be seen by the software.Using either Adobe 2 (yes I know its old but it works) or MS Live Movieplayer each does not see any of the cameras. The cameras worked with the software on an old XP system. Where am I going wrong?
I have a MiniDV video camers, the only output it has is 3.5mm jack to R/W/Y composite, My mobo is an Asus P5Q Pro Turbo so have o way to plug directly in, does anyone know of a cheap way to got the job done?
My windows 7 pc locked up so did a hard boot. Not it is hanging on the "starting windows" screen. In safe mode same thing, but can see the last driver listed before hanging is null.sys. I see the hard drive light continuing to flash after waiting 30 or so minutes no change.I've tried regular boot, last known good boot, safe mode, startup repair... they all hang.Any suggestions on getting this pc booted or what the issue is? Not sure if hard drive ran out of space due to some operation or maybe a virus or something else.
how can i import a movie in windows 7 from my sony camcorder? The installation of the hardware worked fine but i can´t find a program where i can import it??
Fresh install loading Windows 7 it asks for mass storage device driver with CD for motherboard open on Z77-DS3H and drivers available where is mass storage?
My HP pavilion laptop does not recognize my Samsung mini camcorder. (After connecting a firewire cable to the DV port on the camera and then plugging the other end into to laptop USB port).
During a recent windows update my pc froze, (mid-update) and I restarted my machine. Now windows gets stuck at the black" Loading operating system..."screen. After a long wait it will eventually display boot from cd/. When I boot from my windows dvd my os is not shown in system recovery. I Have also tried running start up repair from recovery with no luck.
Every time I shut down my computer, not restart, when I turn it back on my Nvidia drivers don't load and I have to reinstall them. Restarting the computer works fine, it's only after a full shutdown. I tried reformatting just to see if that would solve the problem, it didn't.
System: Intel i7-920 @ 3.8 GHz MSI Big Bang XPower Elpida 6GB (6x1) DDR3 573 MHZ MSI GTX 560 Ti (x2) Samsung 1TB, WD 1TB MSI Quantum Wave soundcard, Asus wireless card Windows 7 Ultimate x64 Corsair AX850
So this is not the first box I've built but it is the first time I have not been able to boot easily for so long. The symptoms are that it hangs at the windows logo on the start screen, most times. If I do a safe boot, then sometimes it will boot successfully afterwards.
I can play Call of Duty 4: Modern Warfare, watch movies but opening a picture would cause a BSOD. I fixed the last symptom by reseating the card and installing the latest driver (195.62) while only the vga monitor is connected. It still hangs at the start screen though on a cold boot.
I have used the Windows 7 mem test to confirm it's not memory. I have then done a boot log (ntbtlog.txt) and I can see the following lines repeated as it tries and retries to load drivers:
Did not load driver @hal.inf,%acpi_amd64.devicedesc%;ACPI x64-based PC
Did not load driver @cpu.inf,%intelppm.devicedesc%;Intel Processor
... (more of the previous line)
Did not load driver @oem6.inf,%nvidia_dev.05e3.01%;NVIDIA GeForce GTX 285
This happened on the driver that came with the device too. I can tried repair installs and clean installs of my OS. I tried deleting the driver altogether and then letting windows load a driver for it and same result. Aside from sending the card into the manufacturer for testing, are there any ideas out there on what i can do?
Sadly, I am actually enjoying the challenge. Mostly because on the rare occasion I can boot normally and use my pc normally and leave it on for easy's sake.
I'm at my wits end now though, After several attempts at installing Win 7 RC (64bit) I realised it wouldn't let me becasue I hadn't added the latest drivers for my motherboard. Now it appears to have installed but whenever windows starts, it reboots at the point where the first 'red dot' appears (the four colours swirl in to make the window).
I ran in safe mode and it appears to reboot whenever it gets as far as 'system32/drivers/disk.sys'
I have installed to three different HDD, both IDE and SATA. All clean before the start. I've used an IDE DVD drive and a USB external, and my BIOS is totally up to date. I've now striped the PC of everything none essential.
The latest drivers for the motherboard are the Vista 64bit variety because there are no windows 7 drivers (that I could see).
P.S. I also obtained a copy of the 90day release version of 64bit Ultimate, which a friend has successfully installed on his Vista laptop. I've tried installing this with all the same configs and same problem every time.
Computer Stats: 2009 Macbook Pro running Windows 7 Ultimate x32 via boot camp, all drivers up to date as of last night, no non-factory parts or tampering with any system files. Issue: Around a month ago, I noticed my laptop freeze up whenever I left it unattended for more than half an hour. Sometimes it would lag for 30 seconds or so and then be fine, sometimes I would have to reboot entirely. This happened again two days ago and upon rebooting it became stuck during the animation at the "windows loading" screen. I restarted and used F8 to pull up the advanced boot menu, chose "system repair", and it went through two loading screens before presenting a black screen of death that never seems to change. Booting in safe mode works, which I've used to scour the internet for fixes and ways to get incredibly drunk. Attempted Fixes: A full system virus scan (duration: 13 hours) with Kaspersky, Malware Bytes, and Panda. Nothing was returned save a few false-positives from torrents (only trusted trackers, nothing dodgy file-wise). Used the "repair my computer" option at F8'd start-up multiple times to no avail. Used "sfc/scannow" twice, which downloaded some windows updates but didn't fix anything. Yelled really loudly at computer and raised my hand as if to smack it, intimidating it into submission but not fixing core issue.
Here is the result of my bootlog, but before that I'll note that it hangs on "Loaded driver SystemRootsystem32DRIVERSCLASSPNP.SYS" for about thirty seconds when loading in safe mode. I thought that might have been the root and downloaded another copy of classpnp.sys, but again it didn't change anything:
Quote: Loaded driver SystemRootsystem32DRIVERSCLASSPNP.SYS Did not load driver @hal.inf,%acpiapic.devicedesc%;ACPI x86-based PC Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery
[Code].....
edit: I made a system recovery disk and attempted to use both its automatic fix feature and its "detect memory problems" feature. Both came back completely fine. Nothing has changed.
edit: Startup Repair has verified that the root cause is a driver. However, I've no idea which one. Surely that's contained somewhere in the bootlog.
One particular site that is not loading at all, on any browsers on my computer is [URL]. There are many more that fail to load as well. I did test these sites on my iPhone with no problems though. There are a handful of other sites that do open but do not load properly [missing images, ect.] I also thought that it might be malware but I installed & scanned my computer with four different programs which did not solve the problem. I'm guessing that it still may be some problem on the software side with settings but I can't seem to figure out where to look. BTW, I've been using Microsoft Security Essentials as my antivirus program for the past couple of days now. Prior to that I was using Avira but it seemed to be giving me problems so I uninstalled it and installed the Microsoft app.
Until yesterday I had two different versions of Windows installed on two different hard drives, one on C: and one on E:. Yesterday I decided to remove the one on E: and started using CCleaner to just wipe the drive clean. I stopped in the middle and decided to format the disk instead because it was going to take a few hours using CCleaner's wipe. But by then Windows was having trouble with that drive and although it was detected, I couldn't format it or do anything to it for that matter.So I downloaded a copy of Natty and running it from the disk, I was going to try formatting it from there, but it was not detecting that drive. Fine. I understand there is a way to mount the drive and I just have to figure that out.
i have a big problem my window is not able to load properly after window 7 log my pc gets hang and nothing can be done 1st i thought it can be because of corrupted window so i tried to install new window that's window 8 but new setup is also getting hang what to do guys?and good thing is that window 7 is working fine in safe mode but its not working in normal mode in any case nor in normal window or in normal setup mode
I have read a lot on this getting stuck. I had an issue with it getting stuck, so I had HP to send me the recovery disks and I backed everything up and did a clean install. It did its thing and now it is at the Windows is loading files screen. Bad news is, it has been on this screen since last night at around 8:00 (12 hrs), Good news is, it has been moving. I put a sticky note on the progress bar, even this morning it has moved about a half an inch. Should I be worried or just patient? It said it may take up to 3 hours and it has been 12 hours.
I did a clean windows 7 installation after formatting my Hard drive the installation went clean i noticed that after switching my computer it takes me directly to " starting windows " and then to " Login screen " but in my previous installation i use to get,As shown in the picture, the black screen showing microsoft corporation logo with green bar and i am not getting the same in my new installation what went wrong.
i followed the same issues and solution shown here:[URL]..but the problem is, when i go to that folder using command prompt, i dont see any cachecat.cache file, only driver.rtl in codeintegrity.
