COD 4 and/or COD will not load or start in win7 Professional. Both set to run as admin. Windows updated. Nvida GF 650 is video card. Will not load either Singleplayer or Mutli-player. I recently put this PC togeter so Win7 is a new install. I have no problems with running other programs, videos or music. Why Activison?
View 6 RepliesSo ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 4 Replies View RelatedMonday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
View 4 Replies View RelatedI'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD
cmdGuard
cmdHlp
CSC
DfsC
discache
ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
I have been trying to use the installer dvd to try and repair windows. At the screen where I can select to load drivers, I don't see an option from the place that says "Select an operating system that you want to repair". I hit next, and I go the startup repair from recovery tools. Every time I run the tool, I get a message that says that the tool may have completed successfully, reboot to find out
View 9 Replies View RelatedMy Dell Studio 17 shut down yesterday after sitting idle. Now i cannot boot windows. I get this endless loop that ultimately leads me to startup repair which either hangs or errors out. Attempting to start in safe mode takes me to same place.I know the root of the problem is bsod as I see it flash when attempting to load windows.I was able to launch system restore tool from advanced options (f8) but after selecting restore point the cpu seems to hang after over an hour of Initalizing.I can bring up command prompt by the way.
View 3 Replies View RelatedThe only executable program I can run is Internet Explorer 64-bit. All other programs do not open when I click them - either the shortcut or the icon in the folder.This includes all Microsoft Office programs, AntiVirus programs, Firefox, etc. When I click the program, the timing circle comes up next to the cursor for a couple seconds, then disappears. I've tried looking at task manager when I click the program. For many programs (not all), the task process shows up in "Processes" tab for a second, then disappears. The program never shows up under tasks in the "Applications" tab of Task Manager.For some programs (mostly MS Office) I get a prompt "There was a problem sending the command to the program". Windows/Programs I can open: Windows Explorer (for My Compter, My Documents, etc.), 64-bit IE, Wordpad.
Methods I've already tried:
1. Restart, both cold Windows restart, and restart in Safe Mode with Networking.
1. Removing all startup items using msconfig window. Even when all were removed, I can't open any programs.
3. Using Cntl-Alt-Delete to correct windows file associations. typed in "assoc .exe=exefile.
2. Restoring default registry files. Direction was taken from here:
This problem started after I tried to remove an Antivirus2010 bug. I followed the instructions found here and then tried Adaware to remove any additional spyware. My thought is I screwed something up when replacing the HOSTS file, or I removed something I shouldn't have using the AdAware anti-spyware program.
I was on the internet using my laptop when it just quit and shut down. Now I have this problem with progams not loading. I cannot load most of my programs from either icons or start menu, I am only able to get on the internet with IE 64 bit loaded from the start menu.I haven't downloaded or made any changes. I seldom use this computer for anything but email and internet access.
View 11 Replies View Relatednew HP computer that the internet was installed on this last week. The phone guy hooking it up got on his computer and said he was all set. He went to turn on computer on gets a blue screen with the window 7 icon but it is frozen on there and he can't get anything else to come up on the screen.
View 3 Replies View RelatedWindows froze(windows 7-64 bit) and I powered off the computer and powered up Windows loaded until the colored flag came up and stuck at that point. Have tried to repair and use a good restore point, but no joy. Sticks at same point.Used windows install disk to enter repair and tried to restore system, no joy, same sticking point.
View 10 Replies View RelatedI'm trying to get my nephew's laptop (acer aspire 5749) to boot up (apparently battery ran out during shutdown and not worked since) - on power up it gives the option to repair or start as normal. Repair takes you (eventually) to a grey screen with wavy ribbons at the top, a moveable mouse cursor but nothing else happens (even after leaving it for 24 hours). "Start windows normally" takes you to the loading windows screen, then it reboots itself (and the repair options come up again...).
Have booted with a windows repair cd but the same grey screen/wavy ribbons thing happens again and nothing happens (even after leaving it 24 hours).
Booting into safe mode gives no joy either and stops the boot up process during the drivers loading up. It used to stop at one of the AVG drivers so I used the AVG repair utility (midnight commander) to rename all the AVG stuff but then it just stops at another driver instead (now it stops at classpnp.sys).
I've done the memory check on the AVG disk which passes fine so I'm guessing I need to run some checks on the hard disk itself. I've just downloaded the Ultimate Boot CD ( Ultimate Boot CD - Overview ) but don't know which of the utilities you'd recommend I try first?
I've recently been having trouble with my computer. I turned it off one day, and when I tried to turn it back on the computer would never start. It would say loading windows, and it had the windows logo and everything, but then it would just stop. I tried to go through safe mode but that wouldn't load either. So I tried using my repair disks, but the repair disks won't load up either. I went into BIOS and made it so it would boot from the CD first, but... nothing. It just goes to this grey screen with that sweepy background graphic you get when you first get windows, and does nothing.I have a laptop, Windows 7 64 bit.
View 1 Replies View RelatedI have a new monitor, and also a new USB to RS 2343 converter cable that both came with a CD that apparently has Drivers for the devices on them.
They don't start automatically in auto-play to load, and my reading of the file labels in the CD makes no sense to me.
So, with the CD in the drive just sitting there, what do I do to actually get the PC to recognize the Drivers in the Folder(s), and load them in the appropriate places ?
I turn on my computer and confronted with a screen that reads, "Windows failed to start. A recent hardware or software change might be the cause. It then displays two options: "Launch Start Up repair" or "Start Windows Normally." Regardless of which one I choose, the monitor ends up going blank a few seconds later after a loading bar or Windows logo. Nothing happens after that, just blackness on the monitor. I have tried going into the F8 options, and unfortunately none of them appear to be working. Safe mode, Low resolution, Repair your computer, and all others seem to fail. I have misplaced my Windows 7 Discs in the process of moving from one house to another and I am unable to get to the discs for a recovery.
View 8 Replies View RelatedI dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal. First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly. After that my laptop has not been working. The machine turns on and gives me two options. Start windows normally or do a repair. Upon starting windows normally, it loads so far before sending me back to the two options of start windows normally or repair. On the second time I clicked repair. My laptop then goes so far before presenting me with a blue screen that is usually the screen where my accounts are. The cursor still moves but it loads no further even after leaving it an hour. I decided to make a repair disk, hoping that the problem was because of windows. the disk loads, gives me a choice on the keyboard language then does nothing. I honestly have no idea what to do, I want to keep all the files safe on my computer as I havent backed them up and I have worked so hard on the projects.
View 1 Replies View RelatedIm having a couple problems with my computer, firstly when i boot up The icon for the LAN onnection has a red cross to say its not connected even though it is and it will recognise that it is after approx. 5 minutes and will only say network instead of the actual name if my connection (network99) secondly when i log on from booting up the desktop take a while to load and all the icon thumbnails load slowly one at a time and its really slow.
View 1 Replies View RelatedI have a video card that used to boot up in windows 7 - but know this computer with a GeForce 9500GT video card boots up with the Vista boot up logo.I found out this was the video card because I have another card with another GeForce video.I took the swapped the video cards, and the indication changed. The original computer booted with the windows start up screen. And the test computer booted up with the vista boot up screen.
I was told by a local computer repair facility this had something to do with video drivers.I tried what the organization suggested and uninstalled all video drivers (I used generic Windows 7 Video Drivers).Then the organization recommended downloading the latest video drivers for the GeForce 9500GT.This video card has 512GBytes of memory. I did this.Then I was told to install the newly downloaded video drivers.I resrted the computer with the Vista login screen with windows 7 operating system,and the vista login screen was displayed.
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
View 3 Replies View RelatedF keys will not work either! I don't think I have a disc to restore from, what else can I do?
View 4 Replies View RelatedMy dell n5030 laptop isnt getting past the windows start up screen. It boots up fine up to the part where the four balls become the windows logo, but then freezes there everytime. When i try to select the windows start up repair it blacks out the screen and I cant do anything.
I know its not a faulty hard drive because its newly fitted and this problem occured previously on a different hard drive aswell.
Recently my computer is always at 100% even when no apps are running. But as soon as i run Task manager load reduces. This doesnt happen in safe mode. Im sure that this is a virus. When i scan my computer with Avira Antivirus (Free) it doesnt detect anything
View 16 Replies View RelatedI have Windows Ultimate (x64).I use the Asus Suite II supplied with my Asus Asus P8Z68-V Pro Gen3 Motherboard (which I like for fan and temperature monitoring) Ai Suite II always loads BUT "on screen" it is messy during loading because a seemingly AI Suite bar sized white artefact appears top left of screen for 10- 20 seconds before disappearing when the AI suite icon appears in the notification tray. Sometimes a white square also appears temporarily.I have noted that if I exit Ai Suite II and reload via the Asus AI suite supplied Shortcut I never get these artefacts AND the suite loads instantaneously (I note however Asus uses AI Suite II.exe via the shortcut but via the Asus installed Task Schedule it open via "AsRoutineController.exe -open"I have also tried unloading AI Suite II and AsRoutineController.exe and loading AsRoutineController.exe and it too loads cleanly and almost instantaneously.
1) Why does Asus use the Task scheduler instead of loading via the normal Windows Startup procedures?
2) Could it be so each can be easily disabled if required) and is that the ONLY reason?
3) what is the -open switch in the command line?
4) Is there ANY good reason why I should not disable the AI Suite II in the Task Scheduler and add it the the Normal Windows Startup applications I use the Free version of Startup Delayer as it has served me wonderfully with my current Win 7 O/S (and my previous XP) in ensuring all desired Notification Tray Icons display EVERY time).
Today I PROVISIONALLY made the change and AI Suite II opens cleanly (as other Startup apps) without temporary white artefacts and with no noted side effects so far. I am nervous however, to make it permanent without advice from knowledgeable Seven Forums members on this subject
my daughter has a two year old Toshiba Satellite laptop, AMD, Windows 7 64 bit. (I don't know all the specs to her machine) Windows will not load.Gives me two options at start up, normal or Repair start up, I have tried.both, normal brings me back to the same menu, so then I check repair, itruns through to the windows loading, then goes to a blank screen with the cursor.When she got this pc I created 4 recovery discs from the start menu the.4th one I have labelled Recovery Environment 64 bit. Can anyone guide me here?If her hard drive was fried would I still get the Windows starting up menu?I have never tried to repair a laptop, have done it a quite few times on my.desktops, but am at a loss since there are no messages at all during start up.Okay, I have tried using the disks, the first one seemed to run through,then I had to shut system off and put the 2 and 3rd recovery disk in, but this is part of the message I received when I tried to run those disks.Intel UNDI, PXE-2.1 (build 002)This product is covered by on or more of the following.PXE Rom the same message seemed to fill the screen - looks to me a failed drive?How do I check that? When I went into the Bios it seemed surprisingly limited (sparse) , not sure if it said hard drive or not Can I fix this without taking it to a shop? and if I had to buy another HD.for the laptop is the Windows 7 OS on those 4 recovery discs I made or will I have to buy another licence?
View 5 Replies View Relatedthe thing is, after some usual Microsoft updates on my Windows 7 Home premium, it refuses to load, stuck at "windows loading" right after bios loads, i have to shut down the PC and restart, and it loads, but then it installs the updates again, and the same thing happens, how do i solve this
View 6 Replies View Relatedwindows 7 32| installed by the manufacturer so I don't have any discs to reload it..I'm sending this on my mac because I cannot start windows on my laptop Yesterday it went into some sort of thing where I tried to restore it the way it came from the manufacturer but it's in some sort of loop.I started in SAFE mode and used the restore setting but now it starts trying to load but I get this error message: "the computer restarted unexpectedly or encountered an unexpected error, windows installation cannot proceed. To install windows click OK to restart then restart the installation"... [setup is preparing your computer for first use]
View 1 Replies View RelatedI am about to buy a new desktop and notice that most of them now come with Windows 7 Home Premium. I was wondering if it's possible to load Windows 7 Pro? My CD of 7 pro is 32 bit version. Will it be compatible with a 64 bit machine?
View 2 Replies View RelatedI have tried 5 times to load Windows 7 Service Pack 1 and each time it fails. I have made sure there is enough disk space, updated the drivers & run cCleaner registry check - all to no avail.I have also explored the Microsoft suggestions for the failure to load. It would appear that it might be caused by the Background Intelligent Transfer Service as this doesn't start. It won't start if you access it manually through the control panel either.
View 3 Replies View Relatedmy computer its not loading it just stopped. I tried the doing the factory default recovery it went through the process but their was an error and could not complete it said to turn off the computer. I restarted and it saying now windows could not be installed I have to restart the computer to install windows ever time the same thing please help me. Toshiba NB505
View 1 Replies View RelatedMy Windows 7 DVD will not load on my PC. My DVD drive is fine (it will read or load any other DVD that I care to throw at it)
My disc is OK as it can be read on any other PC that I care to put it in.
The PC that I am trying to load it on to is running Vista Home Premium at the moment.
Can anyone help please?
i was upgrading to windows professional when i shut down to early and now keeps saying re start over and over again i need 2 install again
View 2 Replies View Related