OK, so, after discovering that EVENT VIEWER had errors regarding my 500GB drive having bad clusters, I decided to make a "CHKDSK E: /F /R" (where E: is my 500GB drive).So, when doing small tasks with it running, I found that my computer went terribly slow... Memory is at 90% of usage (1.8GB on 2GB). CHKDSK in the processes says it's using 1 192 588 K of RAM o_O
View 6 RepliesI find that if I run chkdsk and watch the memory usage in task manager it jumps by about 50MB every 2 seconds or so until it either finishes or hits around 3.2GB at which point my physical memory shows 99% used (I'm running 4GB), and the system of course slows to a crawl.f you just run a quick chkdsk on your boot drive you may not notice it, but try running something longer like chkdsk /r on a flash drive or chkdsk /f on a bigger internal drive (but not your OS drive as this would require a reboot) and watch the memory usage climb. I have duplicated this on both systems I have running Windows 7. My XP machine (checking the same USB flash drive) uses a much more normal amount of memory for chkdsk (20 - 30 MB).
View 9 Replies View Relatedhow to convert a shared video memory into dedicated video memory and system video memory? me and my friend have the same specs computers but the same game runs slow in my computer but it runs smoothly in his computer?
View 1 Replies View RelatedWhen I try and Disk defrag a message comes up..."Disk degramenter has detected that Chkdsk is scheduled to run on the volume Cf. (C. Please run Chkdsk /f. " What is this and where and how do I run this? I have trying everything. But I am pretty Computer dumb.
View 7 Replies View RelatedChkdsk is becoming extremely annoyingOne day it does chkdsk for no reason at alThen some day it does it againHow do you disable chkdsk?
View 4 Replies View RelatedIm trying to run CHKDSK. Upon restarting my notebook, its just a blackscreen and windows does not start up. After 30-40 mins it goes into sleep mode and when I go out of it, everything runs fine, but I dont think CHKDSK has run.
View 1 Replies View RelatedI ran the chkdsk /r upon next reboot.The DOS screen was displayed and running.I stopped watching the screen, and hours later upon checking, the screen is not displaying anything.The machine is a laptop hooked up to a docking station.I checked the monitor connections, they keep going to powersave, I undocked the laptop and the display there will not show anything either.The battery and wifi lights are steadily flashing.Windows 7 Pro x64..What is going on? is the chkdsk done? should i hard reboot the machine?
View 2 Replies View RelatedI am trying to run CHKDSK on an external drive that appears to have some bad sectors. I get the standard "Access denied as you do not have sufficient privileges. You have to invoke this utility running in elevated mode." error. Elsewhere in this forum are similar complaints that tell me I must run the CHKDSK command as Administrator and get a command prompt that reads "C:Windowssystem32>" instead of "C:UsersAdministration>". Well by running the cmd.exe command as Administrator I finally got the recommended command prompt (the "elevated" command prompt some are calling it).
View 2 Replies View RelatedI made a chkdsk and found errors which were repaired by not allowing the bad fragments to be written on. When I use chkdsk /v it continually shows 8kb in bad sectors. Does anyone know if these are the bad sectors that were sent into limbo or the total bad kb on the hard drive? I have made back ups of my documents and the OS. I think that these bad sectors were caused by a recent freeze which required a bad shutdown. If so I may not be required to replace the harddrive.
View 4 Replies View RelatedI'm using acer aspire 4930 was using it fine then one day starting up takes 30mins, and doing anything on it will either takes forever or not reponding at all. So i start up in safe mode and found out that my second partition is unaccessisble. I tried using check disk the normal way, but it says windows cant access it. So how do i fix this as i do not want to lose my files.Path D: could not be opened. System error [1392]: The file ordirectory is corrupted and unreadable.
View 1 Replies View RelatedWhen i turn on my PC Windows always checking my harddrive.
View 2 Replies View RelatedYesterday I tried to install an image mounting program (Alcohol 120%) on Windows 7 Professional x64. When the instillation started it prompt me to restart my computer (which is normal). When my computer restarted I got 5 error messages at the logon screen (in the following order):
(1) The file or directory C:Windows
escache is corrupt and unreadable. Please run chkdsk utility.
(2) The file or directory Program FilesCommon FilesMicrosoft Sharedink is corrupt and unreadable. Please run chkdsk utility.
(3) The file or directory C:Program FilesCommon FilesMicrosoft Sharedink is corrupt and unreadable. Please run chkdsk utility.
(4) The file or directory Program FilesCommon FilesMicrosoft Sharedink is corrupt and unreadable. Please run chkdsk utility.
(5) The file or directory C:Program FilesCommon FilesMicrosoft Sharedink is corrupt and unreadable. Please run chkdsk utility.
After hitting âOKâ on each message and typing my password Windows logged me on to a temporary profile.
I went to my C: drive and tried to run the chkdsk but I got this message: âWindows canât check the disk while itâs in use.â So I chose to schedule a disk check next time I log on. Then I restarted and let chkdsk run. Then I got this error message:
âCannot open volume for direct access.
Autochk cannot run due to an error caused by a recently installed software package.
Use the system restore feature from the control panel to restore to a point prior to the recent software package instillation.
An unspecified error occurred (766f6c756d652e63 3f1)â
I then skipped check disk and tried to System Restore and got this error message:
âThe disk C: has errors
Windows has detected file system corruption on C: you must check the disk for errors before it can be restored.â
Windows seems to be taking me in circles, and I am unsure of what to do. I would really like to avoid reinstalling windows and starting from scratch.
If anyone has had this problem or knows what to do, any help would be appreciated.
i am having a problem with my memory getting tied up / used up and not being able to access it again until i reboot.
machine: dell xps studio 8100
os: win 7,
processor: i7 2.8
ram: 16gb (max it will take)
video: ati radeon 5700 (running 3 monitors)
versions: as far as i know i am running current versions of everything, including video drivers, flash, chrome, etc. (i've tried running chrome with both the build in version of flash and the system version -haven't seen a difference)
browser: i nearly exclusively run chrome / canary with auto-updates so am at the latest builds.what seems to cause me to use up / run out of memory is after i play videos (Internet, netflix, etc.), the memory seems to get used, but is not returned to the system, even if the browser is closed and re-opened.right now for example things are working fine; i rebooted my system a couple hours ago (but have not played any videos). i have adobe lightroom running, picasa, chrome and canary (currently 4 web browser windows open with 52 tabs open). task manager currently shows me using 8.20gb of ram, that seems pretty reasonable to me.
normally my system will keep running properly (if a program is closed, memory is freed up) right up until i start to play any videos (Internet, netflix, etc.) then it will start using up more memory. (of course i expect it to use more memory during playback) however, even if i restart the browser, the memory does not get freed back up. for example, just prior to the reboot, with everything closed, i was using right around 8gb of ram. once i rebooted, i was using 1.something gb of ram prior to opening any programs.however, once i start playing some videos, i never seem to be able to get my ram freed back up again unless i reboot the whole system. this is not just a problem with how much memory the system shows as being available, i frequently actually run out of memory. (task manager will show me as using around 15gb and then everything starts swapping out like crazy).
I wanted to delete a folder in my documents but it was giving me an error which I cannot remember exactly now, but after doing some research, most sites had suggested that I run a Chkdsk. My computer successfully completed the Chkdsk, but now my computer is in some sort of coma where it loads up fine, but after logging in, there is no text whatsoever on the screen. On top of this the start bar does not work and any explorer based functions are extremely large,pixelated and absent text.I'm using Windows 7 Ultimate x32 on a 2009 Toshiba Satellite In the last year of high school and don't have most of my files backed up anywhere?
View 1 Replies View RelatedI was trying to partition my 500gb hdd in my laptop. So i could run windows xp and 7 on the machine. But before partitioning it it said i needed to run the Chkdsk utility. so i had it run on startup. Now for about the past 6-10 hours it has bean on stage 4 of 5 going from 32% to 34%. How do i stop it? I dont wont to hurt my computer. i have windows 7 home premium installed on the machine that has the problem.
View 14 Replies View RelatedI am using Windows 7 64 bit Home Edition. Is it appropriate to use chkdsk periodically to check the health of my C: & D: file systems? Can running chkdsk cause any harm to the file system?
View 3 Replies View RelatedI just installed an Intel 330 120G SSD in my netbook. Macrium Reflect worked brilliantly to clone and resize the partiions to fit from a larger 250G hard drive to the new 120G SSD.After swapping in the new SSD, I wanted to make an image of the completed install but Reflect balked for the C: drive with an "MFT error" and a suggestion to run ChkDsk.I did as instructed and ChkDsk returned a bunch of errors but I suspect they are not really errors but rather unexpected results from an SSD. There were about ten of these...CHKDSK is verifying files (stage 1 of 3)... 0 percent complete. (0 of 151808 file records processed)Attribute record (128, "") from file record segment 1536 is corrupt.
View 7 Replies View RelatedI upgraded from Vista to Win 7 using the HP upgrade disk. About every 2 weeks chkdsk will start at startup. The countdown won't stop and I can't skip it by pressing any key. When it counts down to 1 it freezes and I had to press the power button to restart. Then when it restarts the problem reoccurs.
In the past if I press F8 and choose last known good configuration, the system will normally boot. And then I'll schedule a disk check next time I start the computer and this will normally fix the problem. There won't be any check disk error in 2 weeks.
But this time no matter what I do I can't get it fixed. sfc /scannow didn't find any errors. I ran the system repair by pressing F8 at startup and it said it fixed the startup problems. But the disk check I scheduled at startup still won't run properly. It shows up and then disappears without actually doing anything.
I'm using Avira now but the problem was there when I was using Avast. I don't know what might be causing the problem.
I have CHKDSK running at startup and when the "press any key to skip in..." prompt appears the system freezes completely when the counter reaches 1. If I press any key the system freezes instantly. I did a chkdsk /r in repair console and it did not found any problems, but the startup chkdsk prompt won't go away.
Is it possible to disable the chkdsk autostart with repair console or startup repair? System is running 64-bit Windows 7 Ultimate and hard drive in question is 5x 500 GB RAID5 array.
I'm sick of chkdsk running at start up!!!!How do i remove this sh*t from my computer!?!?
View 2 Replies View Relatedi am getting lately often chkdsk launching on boot and also when i use it to check the situation on the reported partitions (at least two physical drives so far) it reports errors almost on every run even if sometimes they are like 10 minutes after the previous "scan and fix errors" .... Surface / sectors tests and WD diagnostics tool scan (all drives are WD) are coming up clean ...What's the deal here? Doesn't look like the drives need to be replaced right? one especially is like two weeks old
View 1 Replies View RelatedI tried 'Scheduling disk check' from both cmd and tools but every time I restart my computer, or turn it off and then on, it will skip the chkdsk and start Windows normally.I am getting a lot of 'corrupted file' errors and it's suggesting I run a chkdsk, but like I said, I can't figure out a way to do so. It's causing me a big headache.
View 5 Replies View Relateddo scan in window defender and chkdsk do the same jobs?
View 9 Replies View Relatedmy computer was not booting up so last night I went to the built in startup repair in Windows 7 and through the command prompt did a "chkdsk c: /f /b" which I saw online. It took about 15 hrs to get where it is at now which it finished the stage 5 and now says "Free space verification is complete." I thought that meant it finished but im assuming not because it won't let me type in the CMD box. Its been at this point for about 2 hours now and im wondering if I should try to shut down and boot up my computer or wait out until it does more. Also during stage 4 it said a couple times that windows repaired bad clusters?
View 1 Replies View RelatedMy problem was that startup repair wasn't workiing and was in loop, i tried everything and didnt know what to do, anyways i was bored so i kept trying the infinite loop tutorial several times only to see I/o errors..... I kept trying one got through so i closed the cmd and reatarted the laptop only to find the CHKDSK waiting, i thought this was good but it has taken 18 hours to get to 2% complete and its only in stage 1
View 5 Replies View RelatedThe past few days my computer has been giving me many errors. The way it started were lag spikes. I had opened word to write a bit, and it started lagging alot. My computer has always been fast, and although it could sometimes slightly slow down, it was never this bad. I mean, it was slower than my old laptop with 1gb of ram. I saved and closed word, and went to task manager to troubleshoot if there were problems. All normal. I closed task manager, and went to the start menu to shut down, just in time to get a Bsod. Yes I would love to share any dump files, however i now barely can access it (I just managed to run cmd for a bit) since windows explorer keeps crashing. Ok, so the only thing i know about the bsod is that it gave me the "KERNEL_INPAGE_ERROR", giving the the error code 0x000007e(i think). Also what i noticed was that the error when explorer.exe crashes it gives me the InPage error too. A bit of Google searching easily revealed that the INPAGE ERROR is often related to hard drive problems. Then, the next day, when i restarted the computer it went to chkdsk, (i never scheduled it) and scanned. What caught my eye was that it said "Recovering Orphaned File ### in directory ###, and it said there was not enough space on the drive" (where ### is was a random number that meant absolutely nothing to me) in some points. So the probability that i have a defective drive was getting higher. I decided i needed to do a virus check, but the result was a simple advertising software, which told nothing of the story, so i knew this wasn't a virus cause. I started up my computer, and, although explorer.exe kept crashing literally every 5 seconds, i managed to open up cmd prompt, and typed in "chkdsk /r /f' for a deeper scan. I restarted the system and let it run for a rough 4,5 hours. It founds many bad cluster and apparently "replaced" them. It found bad cluster everywhere on my drive, from files in system32 to my minecraft worlds! Now, I have just started another scan (it is still running) and it pointed out those exact same bad cluster and said it was replacing them.
So the big question is: Is my drive failing? Or is it just windows which is screwed up?
I am really hoping to get over this problem as soon as possible, because, even though i have this laptop i used to write this, my desktop computer is important too.
As for the memory dump files and chkdsk logs, they should be on my computer, and ill post them as soon as chkdsk finishes.
I just started up my Toshiba laptop after it overheated and shut down, and Windows showed the Starting Windows screen, then I got a black screen with chkdsk running on it.
View 3 Replies View RelatedI accidentally clicked on schedule chkdsk and I do not want to spend hours waiting so How would I disable it, what does this mean in "regedit": Autocheck autochk/r??c:autocheck autochk* and I want to change it so it can act they way before when I clicked on schedule chkdsk
View 1 Replies View RelatedI'm using a fairly new laptop, had it for less then a yr. It came w/ Vista and I never had to use Chkdsk on it. I used the Windows 7 upgrade disc about 3 weeks and upgraded to Windows 7 w/ no issues. Love it so far.Today my computer froze while shutting down. I had to hold the power button to turn it off. I then wanted to chkdsk, but it will not run suppostedly because "due to recent software installation" and it gives me error 766f6c756d652e63 3f1.
View 9 Replies View RelatedRan chkdsk /f and typed "Y" not windows will not start
View 1 Replies View RelatedI own an older Win 7 X64 PC. The thing runs fine without problems except when I try to schedule it for a disk error check (Chkdsk) upon restart? When I schedule that the PC is able to reboot, start up and go into error checking and finish part 1, but when it gets to part two it crashes about 25% of the way through it? When I say crashes, what happens is the monitor light goes from blue to amber and the thing just sits there like it went to sleep. No matter what I do it won't come out of this? If I hit the restart button it starts with three beeps and just sits there. I have to completely shut the PC off, let it sit there for a few seconds then restart it.
Once I restart the PC I have to cancel out of the disk check or else it will go through the same thing again. Once I cancel out fo the disk check it boots up and runs fine without any problems that I'm aware of?
How do I get this PC to run a disk check (chkdsk) all the way through to completion without it crashing? Should I just put the thing back to a version that was working (from backup)