I used to be able to burn them. Not sure where to start.
Sony Vaio VGN-NS230E.
imgburn log:
Code: I 00:08:29 ImgBurn Version 2.5.5.0 started!
I 00:08:29 Microsoft Windows 7 Professional Edition (6.1, Build 7601 : Service Pack 1)
I 00:08:29 Total Physical Memory: 3,009,572 KB - Available: 777,384 KB
I 00:08:29 Initialising SPTI...
I 00:08:29 Searching for SCSI / ATAPI devices...
I 00:08:29 -> Drive 1 - Info: MATSHITA DVD-RAM UJ880AS 1.20 (D:) (SATA)
I 00:08:29 -> Drive 2 - Info: ELBY CLONEDRIVE 1.4 (E:) (SCSI)
I 00:08:29 Found 1 DVD�RW/RAM and 1 BD-ROM/HD DVD-ROM!
I ran the Microsoft FixIt application but it did not resolve the problem. Fresh install of windows 7. Brand new cdr's. Also, when I insert a blank CD, it doesn't show up in My Computer, however if I insert a CD with data on it(or music), it shows up. Also should point out I have VirtualCloneDrive installed.
I am trying to burn an *.avi file onto a dvd disk to play on the TV. I am using Windows DVD Maker and when I add the avi file then press Burn, it reports that a dvd burner can not be found. Yet there is a dvd burner on my computer loaded with a blank dvd.
I have a lot of photos on my hard drive. I would like to burn a DVD with these photos and use that DVD in a Sony DVD player hooked up to my TV. What are the steps I take to burn the DVD? So far I seem to be getting DVDs which will show up on my other computers but not be DVD player.
Today, i was trying to burn an ISO today when i got this message."The image didnt burn burn because an error occurred. The drive reported that it is performing a long-running operation, such as finishing a write. the drive may be unusable for a long period of time. (Error code: 0xC0AA0207)"Haven't started a write since my computer turned on.
I can burn a normal audio cd, yet i can not get it to burn mp3's (data cd, also says for mp3's in software) i have tried a few burning programs and always get the same result. so i figure its a windows 7 issue.
how can I play a video in jet audio (or any other media program) on one monitor while I play a fullscreen game on the other. I can get it to work with streams off of website like own3d.tv and twitch.tv, and I can even run the streams in full screen. However when I try to run a movie through jet audio or even just play music through zune player, they freeze up. The audio will still come through, but either the picture is frozen in place or the zune player seems to get frozen.
I'm using Samsung laptop with TSSTcorp CD/DVD TS-L633J recorder. Windows 7 x86_64. Can any tell me what are the possible problems (and solutions) of my CD/DVD burner? I bought this new laptop from Dubai, so even if I do have warranty, I can't use it here in my country Philippines, since warranty is exclusively for Dubai only. My CD/DVD drive can easily play DVDs (even the blank one) without any hassle. Unfornately, it can't read blank CDs unless there are already files burned in it. It can reformat CD-RW, but once the CD became blank, it can't read it anymore. Same thing happens to when I try to burn files on a DVD. It appears that it is burning, but when it finishes, it suddenly gets an unexpected error. I tried all types of disk like DVD+R, DVD-R, CD-R and CD-RW, but it allends the same. My CD/DVD burner cannot burn disks. I already uninstalled the drive, but it's all the same. I run "Fix it", but it gets an unexpected error and won't scan the drive.
I am not new to IT, but i absolutely confused now. I have downloaded the win 32 upgrade pack (the student offer) and it appear to be an exe file. How can i burn it on the dvd and make it bootable?
I have burned CD's and DVDs before no problem. Now I get a window 'Error - there was a problem burning this disc' after maybe 2 minutes of building the image file. Using the built in burn appl in 7 Pro. DVD +R disc is fine, doesn't begin to even burn. Can't be hardware because it's worked fine before. Can't be intermittent as I haven't removed/touched any internals. Tried making the pagefile larger, to match ram of 2GB ( min 2048, max 4000). Same. Lots of room on the hard drive. Can't believe it would be because data is 3.64 GB because 7 should just use the hard drive if it runs out of ram.
my CD drive will not burn any CD, it reads them ok when i put in an audio cd or a driver CD but everytime i try to burn something it fails. Is is very loud when tryin to do this and seems to be reving up and stoppin before it spits out the CD. I have tried burning with Nero, what i always use and also tried WMP and got the same result. Could the disk drive be broke?? is there a command i can run in cmd maybe like chkdsk to check it??
I have been trying to make my USB drive bootable with this ISO with several programs for quite awhilenow. method that i can use to make this NON iso image bootable? Or atleast figure out what kinda of boot file its using (such as linux, windows, etc) so i can configure the best program i've found so far? Its called YUMI - Multiboot USB Creator. It has the ability to be able to boot several types of ISO images ranging from Linux Ubuntu, Windows, Hirens Boot CD, to HP Automatic Firmware update, even Acronis! and more.plus its free! how to figure out which type of boot to choose by browsing contents after mounting the image and then configure this program with the proper settings. I did find something that said Windows, but its a folder. Not only that but as I've said I've tried several different USB to DVD tools, all of them windows and none of them worked.
I've not needed to burn a dvd or cd on my laptop since I've had it (got a desktop and use that mostly) ... but I went to burn a file onto a cd-rw disc tonight and I keep getting the message that the disc is either write protected or that there is no disk in the drive.I've tried checking for updates to the driver, but there isn't any and I have the most up-to-date driver.I've tried uninstalling the driver and reinstalling it - still nothing.And I've also tried removing the drive through device manager, and reinstalling it and yet still nothing.I've searched around on the net for solutions and on here but can't find anything so
not using Windows DVD Maker or nero as of right now im using nero but it always loads when i boot up and there are tons of stuff thats not needed only thing i use it for is to burn data to dvds mainly avi to watch on my tv using my dvd player Windows DVD Maker takes to much of the time on the dvd only 150 min. per a dvd when i use nero im able to burn 3-4 videos to a dvd is there a way to change the time into gbs in Windows DVD Maker are is there a software that would just do the job im looking to do im going to try imgburn and see how the playback is with that
can anyone tell me why I lose lots of disk space every time i burn a dvd with 7 . and where to look for all of the temp files. and why it takes two hours or more to encode?
i tried burning a few files using - CD-RW CD -R DVD +R DVD-R DVD+RW DVD-RW but all of those just dont work, i tried -dvd decrytpor - img burn - CDburnerxp - Daemon tools - Power iso but every single one says burn sucesfull but the disc is still blank.
Yes, I STILL need to burn to a regular CD as CDA is all that will play in my car. I have an audiobook in one large file & have tried breaking it down into several smaller files for burning. The first file burns just fine, but all subsequent files fail as it claims they're too long for the cd, even tho the size is a miniscule CDA. Older versions of windows used to prompt you for subsequent discs but I can't get any program (Roxio, Ashampoo, Cyberlink) to do so--they all return too large for disc.
I unfortunately forgot my windows 7 password of my netbook. However, I was able to find this bootable iso image that removes and windows password. it works great when burnt on a cd and booted from bios but as u know netbooks dun have cd drives. so my qeustion is is there a way to burn the iso image to a usb flash drive from which i can boot from it?
New HP Laptop with Windows 7 - Windows Backup software doesn't recognise DVD as writeable, but Windows7 Explorer writes just fine to the same DVD-R.If I do Control Panel>System and security>Backup and Restore click on Backup Now ....this gives "Backup in progress..." bar - gets to about 25% and stops with the message "Insert Removeable media "Windows backup needs a CDDVD or USB drive to continue" (even though there is a DVD-R in E:, to which I have just successfully burned a very small test file using Explorer. E: shows on Backup pane as being selected as destination drive).If I click on "More information" another dialogue box pops up with instructions to "Label and insert a blank media"Please write the following label on a blank media and insert it into E:"FREDDY 02/01/2011"even though there is a labelled disc in there.(Of course that's a bum instruction from Windows anyway - it won't accept forward slashes - but that's OK - I label it without those. Still doesn't work.)If on the other hand I just select a file in Explorer and burn it ends up on the DVD no problem. With that same successfully burned DVD - Backup will still not recognise the DVD-R.I can use a DVD-R with a small test file burned OK to it, or a virgin disc from the box - makes no difference......
I have a video that I can put on U-Tube for friends to view, but can't seem to burn a DVD from it. What is the "magic" software (needed or included in Windows 7) to do this, and what steps are needed?
