Burn Avi For Dvd Playback?
Nov 15, 2011
not using Windows DVD Maker or nero as of right now im using nero but it always loads when i boot up and there are tons of stuff thats not needed only thing i use it for is to burn data to dvds mainly avi to watch on my tv using my dvd player Windows DVD Maker takes to much of the time on the dvd only 150 min. per a dvd when i use nero im able to burn 3-4 videos to a dvd is there a way to change the time into gbs in Windows DVD Maker are is there a software that would just do the job im looking to do im going to try imgburn and see how the playback is with that
View 6 Replies
ADVERTISEMENT
Aug 28, 2011
Today, i was trying to burn an ISO today when i got this message."The image didnt burn burn because an error occurred. The drive reported that it is performing a long-running operation, such as finishing a write. the drive may be unusable for a long period of time. (Error code: 0xC0AA0207)"Haven't started a write since my computer turned on.
View 1 Replies
View Related
Oct 25, 2012
I can burn a normal audio cd, yet i can not get it to burn mp3's (data cd, also says for mp3's in software) i have tried a few burning programs and always get the same result. so i figure its a windows 7 issue.
View 3 Replies
View Related
Oct 16, 2012
the movie plays on the computer with sound but when burnt to dvd no voice
View 1 Replies
View Related
May 11, 2011
I'm using Samsung laptop with TSSTcorp CD/DVD TS-L633J recorder. Windows 7 x86_64. Can any tell me what are the possible problems (and solutions) of my CD/DVD burner? I bought this new laptop from Dubai, so even if I do have warranty, I can't use it here in my country Philippines, since warranty is exclusively for Dubai only. My CD/DVD drive can easily play DVDs (even the blank one) without any hassle. Unfornately, it can't read blank CDs unless there are already files burned in it. It can reformat CD-RW, but once the CD became blank, it can't read it anymore. Same thing happens to when I try to burn files on a DVD. It appears that it is burning, but when it finishes, it suddenly gets an unexpected error. I tried all types of disk like DVD+R, DVD-R, CD-R and CD-RW, but it allends the same. My CD/DVD burner cannot burn disks.
I already uninstalled the drive, but it's all the same. I run "Fix it", but it gets an unexpected error and won't scan the drive.
View 9 Replies
View Related
Oct 22, 2009
I am not new to IT, but i absolutely confused now. I have downloaded the win 32 upgrade pack (the student offer) and it appear to be an exe file. How can i burn it on the dvd and make it bootable?
View 4 Replies
View Related
Jan 1, 2010
okay so I'm new to Windows 7 and this PC
- Windows 7 Home Premium 64-Bit
- Intel i7 Core, Gigabyte motherboard, 4GB of DDR3 Ram
- graphics card ATI Radeon HD 4600 Series, using DVI connection with my Samsung SyncMaster 2233SW monitor
I have downloaded and installed DviX codecs, K-Lite Codec pack and updated the latest drivers straight from ATI's website for my graphics card and system.
The problem I am having is when inserting a DVD (store bought, Region 1). I have already right clicked on my DVD Drive (D: )and changed it's Region play back to Region 1 (this was my first hurdle).
Using Windows Media Player that came with Windows 7 (11 or 12?) I attempt to play this DVD, and it says playing, but I cannot access any DVD menus, title screens or whatever. No sound or anything is happening, only a black screen. Seems to recognize it as Play-list 1 (D: ), but I can't get it to play, right click on the drive in Windows Media Player, play is grayed out. Tried using Windows Media Player Classic and DviX player as well, and I cannot get a DVD to play.
In Windows Explorer, it shows TS Video Files and TS Audio Files, as if I was burning it or something. (I don't know if this is how Windows 7 shows all DVD's)
Tried the one HD video that comes with Windows Media Player, some 30 seconds of nature, and it plays fine, so I can play video.
Oh and I popped in a music CD and it plays fine as well.
View 7 Replies
View Related
Aug 12, 2010
Not sure where to put this but I have a folder with VOB files. How do you burn VOB files to DVD. Or should I say who makes a good program for this?
View 8 Replies
View Related
Nov 29, 2010
Is it possible to burn a bin file to a DVD in Windows 7 or do I need additional software?
View 4 Replies
View Related
Jun 4, 2012
I have burned CD's and DVDs before no problem. Now I get a window 'Error - there was a problem burning this disc' after maybe 2 minutes of building the image file. Using the built in burn appl in 7 Pro. DVD +R disc is fine, doesn't begin to even burn. Can't be hardware because it's worked fine before. Can't be intermittent as I haven't removed/touched any internals. Tried making the pagefile larger, to match ram of 2GB ( min 2048, max 4000). Same. Lots of room on the hard drive. Can't believe it would be because data is 3.64 GB because 7 should just use the hard drive if it runs out of ram.
View 3 Replies
View Related
Dec 21, 2011
my CD drive will not burn any CD, it reads them ok when i put in an audio cd or a driver CD but everytime i try to burn something it fails. Is is very loud when tryin to do this and seems to be reving up and stoppin before it spits out the CD. I have tried burning with Nero, what i always use and also tried WMP and got the same result. Could the disk drive be broke?? is there a command i can run in cmd maybe like chkdsk to check it??
View 2 Replies
View Related
Aug 6, 2012
I have been trying to make my USB drive bootable with this ISO with several programs for quite awhilenow. method that i can use to make this NON iso image bootable? Or atleast figure out what kinda of boot file its using (such as linux, windows, etc) so i can configure the best program i've found so far? Its called YUMI - Multiboot USB Creator. It has the ability to be able to boot several types of ISO images ranging from Linux Ubuntu, Windows, Hirens Boot CD, to HP Automatic Firmware update, even Acronis! and more.plus its free! how to figure out which type of boot to choose by browsing contents after mounting the image and then configure this program with the proper settings. I did find something that said Windows, but its a folder. Not only that but as I've said I've tried several different USB to DVD tools, all of them windows and none of them worked.
View 6 Replies
View Related
Feb 3, 2010
I've not needed to burn a dvd or cd on my laptop since I've had it (got a desktop and use that mostly) ... but I went to burn a file onto a cd-rw disc tonight and I keep getting the message that the disc is either write protected or that there is no disk in the drive.I've tried checking for updates to the driver, but there isn't any and I have the most up-to-date driver.I've tried uninstalling the driver and reinstalling it - still nothing.And I've also tried removing the drive through device manager, and reinstalling it and yet still nothing.I've searched around on the net for solutions and on here but can't find anything so
View 9 Replies
View Related
Jul 24, 2011
I would like to burn the movies from a DVD to my laptop. Can I do this with Windows 7 or I need another software?
View 2 Replies
View Related
Aug 9, 2011
I used to be able to burn them. Not sure where to start.
Sony Vaio VGN-NS230E.
imgburn log:
Code: I 00:08:29 ImgBurn Version 2.5.5.0 started!
I 00:08:29 Microsoft Windows 7 Professional Edition (6.1, Build 7601 : Service Pack 1)
I 00:08:29 Total Physical Memory: 3,009,572 KB - Available: 777,384 KB
I 00:08:29 Initialising SPTI...
I 00:08:29 Searching for SCSI / ATAPI devices...
I 00:08:29 -> Drive 1 - Info: MATSHITA DVD-RAM UJ880AS 1.20 (D:) (SATA)
I 00:08:29 -> Drive 2 - Info: ELBY CLONEDRIVE 1.4 (E:) (SCSI)
I 00:08:29 Found 1 DVD�RW/RAM and 1 BD-ROM/HD DVD-ROM!
I ran the Microsoft FixIt application but it did not resolve the problem. Fresh install of windows 7. Brand new cdr's. Also, when I insert a blank CD, it doesn't show up in My Computer, however if I insert a CD with data on it(or music), it shows up. Also should point out I have VirtualCloneDrive installed.
View 3 Replies
View Related
Jun 23, 2009
can anyone tell me why I lose lots of disk space every time i burn a dvd with 7 . and where to look for all of the temp files. and why it takes two hours or more to encode?
View 4 Replies
View Related
Oct 16, 2012
i tried burning a few files using - CD-RW CD -R DVD +R DVD-R DVD+RW DVD-RW but all of those just dont work, i tried -dvd decrytpor - img burn - CDburnerxp - Daemon tools - Power iso but every single one says burn sucesfull but the disc is still blank.
View 2 Replies
View Related
Jun 4, 2011
how can i burn cd's from my laptop?
View 1 Replies
View Related
Sep 13, 2011
my laptop shut down before I could burn the recovery disc #4. How do I burn only disc #4?
View 2 Replies
View Related
Apr 20, 2012
how to copy original dvd and cd
View 8 Replies
View Related
Dec 3, 2012
Why cant my drive D able to burn cd dvd
View 1 Replies
View Related
Jan 25, 2009
I get no video either in Media Center or Media Player. I do get the audio however. Right now I'm using VLC for my dvd playback. I like the zoom in Media Center though.
Anyone ever had this problem. I'm using 64-bit windows 7.
View 9 Replies
View Related
Nov 14, 2009
since I changed from Win XP to Win 7 I encounter freezing during playback of DVD's. I tested several DVD's and the problem occurs with both WMP and PowerDVD 6 as well as PowerDVD 9. The only difference between PowerDVD 6 and WMP is that the former freezes every 5 minutes for approximately 5 seconds whereas WMP freezes every 2 to 3 minutes for 10 minutes. So, the latter is useless at all.
My graphics card driver is up to date. I deactivated hardware acceleration in PowerDVD. I would be grateful for further suggestions as I would like to keep Win 7.
View 8 Replies
View Related
Sep 11, 2012
windows updated some keyboard drivers or something before i turned off and removed my graphics card to try sort out the heat sink. Anyway, since then my pc has been unable to detect any of the audio ports attached to the motherboard. I've tried various suggestions on other threads but none have worked hence my first post.I understand for any help ill likely need to give more information and ill happily provide such details.
View 5 Replies
View Related
Oct 12, 2012
My only way of watching my blu-rays is on my computer. I've been using PowerDVD 11 Ultra for a while without significant problems. I recently noticed, however, that it was stopping playback during movies, simply pausing and then crashing. I decided to reinstall in the hope of getting smooth playback. After doing so, I had a new problem: all blu-ray video was now very light, forcing all darks to be gray, instead. I should note that I have a Radeon 5770 card and Catalyst's video settings are disabled to allow the player to function without interference (Catalyst 12.6). Despite that, however, PDVD still just gives me gray blacks. I tried downloading TotalMedia Theater and WinDVD trial versions to find a program that works right. To my shock and horror, I have the exact same problem with them, too. What is wrong with the blu-ray playback that has caused programs to play incorrectly? I am convinced that the problem is not related to my computer. One moment, everything was fine. The next moment, everything was bugged. Please note that all other video looks perfect, whether it be DVD, video files, or online videos with my Catalyst settings applied to them.Does anyone have any ideas as to what is going on? Does Blu-Ray software actually work right on computers? I noticed that the Cyberlink forums have plenty of people talking about this same issue happening with PDVD12. Considering that I had the exact problem with the other two programs, I think this goes beyond software developers.
View 1 Replies
View Related
Nov 13, 2011
Yes, I STILL need to burn to a regular CD as CDA is all that will play in my car. I have an audiobook in one large file & have tried breaking it down into several smaller files for burning. The first file burns just fine, but all subsequent files fail as it claims they're too long for the cd, even tho the size is a miniscule CDA. Older versions of windows used to prompt you for subsequent discs but I can't get any program (Roxio, Ashampoo, Cyberlink) to do so--they all return too large for disc.
View 4 Replies
View Related
Aug 4, 2011
I unfortunately forgot my windows 7 password of my netbook. However, I was able to find this bootable iso image that removes and windows password. it works great when burnt on a cd and booted from bios but as u know netbooks dun have cd drives. so my qeustion is is there a way to burn the iso image to a usb flash drive from which i can boot from it?
View 1 Replies
View Related
Jan 2, 2011
New HP Laptop with Windows 7 - Windows Backup software doesn't recognise DVD as writeable, but Windows7 Explorer writes just fine to the same DVD-R.If I do Control Panel>System and security>Backup and Restore click on Backup Now ....this gives "Backup in progress..." bar - gets to about 25% and stops with the message "Insert Removeable media "Windows backup needs a CDDVD or USB drive to continue" (even though there is a DVD-R in E:, to which I have just successfully burned a very small test file using Explorer. E: shows on Backup pane as being selected as destination drive).If I click on "More information" another dialogue box pops up with instructions to "Label and insert a blank media"Please write the following label on a blank media and insert it into E:"FREDDY 02/01/2011"even though there is a labelled disc in there.(Of course that's a bum instruction from Windows anyway - it won't accept forward slashes - but that's OK - I label it without those. Still doesn't work.)If on the other hand I just select a file in Explorer and burn it ends up on the DVD no problem. With that same successfully burned DVD - Backup will still not recognise the DVD-R.I can use a DVD-R with a small test file burned OK to it, or a virgin disc from the box - makes no difference......
View 2 Replies
View Related
Mar 10, 2011
I have a video that I can put on U-Tube for friends to view, but can't seem to burn a DVD from it. What is the "magic" software (needed or included in Windows 7) to do this, and what steps are needed?
View 2 Replies
View Related
Mar 10, 2012
I have toshiba notebook and I would like to download all drivers and burn them to a DVD .How do i go about getting all my drivers from my notebook?
View 1 Replies
View Related
May 16, 2009
I know it's doable. I did it for 7100. I can't seem to do it for 7127 though.
Basically, I loaded the ISO in PowerISO. Then I told it to burn it to the USB stick. That's it. Now I can't find out how I did it. I tried a search on here and on Google.
Anyone know what I'm talking about?
Never mind. It was UltraISO that let me do this.
View 0 Replies
View Related
