Burning Pictures To DVD-R With Individual Folders?
Apr 6, 2012
I am trying to burn pictures onto dvd-r and would like individual folders of holidays etc, but when I try in windows dvd maker I do not get folders but one long stream of pictures amount in to hundreds on one long slide show and not individual folders.
In Windows 7 how can I change "Folders View" for individual folders without changing them system wide. For example if I select "always show icons" all my folders are set this way, and that's fine. But there are a few folders I have containing jpeg images, and I want to view those as "thumbnails" without effecting the others which are set to always show icons.
This was very easy to do in Windows XP but I can't figure out how to do it in Windows 7.
Any way how or if you can lock or protect individual files or even whole folders with a password or other means? intended for a home pc which everyone uses but i do not want the others at home have access to certain files or folders?
I have windows 7 pro on two computers, how do I access complete network drives without sharing individual folders and and using passwords, I hate using passwords, and I don't have anything on my computers worth protecting, I wish windows 7 would just let me turn off all that security crap. I never had a problem with XP.
I was running out room on C drive so I moved Pictures & Documents folders to E drive. Now I'm planning to do a clean install of 7. Will those folders and contents be safe if I leave them on E drive while I'm reinstalling 7 on C drive?
I am running Windows 7 and have various Folders on the C drive, including Pictures (C://Pictures). When I open it the folders and pictures are not there yet when I right click and look at Properties it tells me there is 17.7Gb of files. I thought I had resolved the issue by going back to the restore point for the main folder (C://Pictures) and indeed they became visible again. On checking the folder this morning they have gone again. I have the same problem with my (C://Users Documents) folder - clicking on Properties tells me there are 697Mb of docuemnts but 'hovering' the cursor I'm told only 497Mb are there & the missing folders and documents are not visible.
The problem began after picking up malware which I have successfully removed from the machine at the weekend. I did use the Restore Points to successfully restore a music folder as the same problem occurred and it is still there! The Restore Point I used has now 'moved on' so I am unable to use this facility.
I'm trying to figure out how to transfer my pic files from 1 folder to another ..... the only options I have when I click on a pic is SEND: to desktop or compressed file .... I know how to send a pic via email or share it on FB, but for the life of me I can figure out how to make THEME folders . I can copy and paste .... I've got Windows 7 .... have to laugh it says I am 972 years old, one would think with that lifelong experience I could figure this out ..
I bought a Dell Inspiron 1545 laptop new in Italy in December 2009 from a major computer store. The computer came installed with Windows 7 Home Premium (Italian), and I have installed on it an original version of Microsoft Office XP 2003 Professional Edition (English). The CD-ROM unit is a Matsushita DVD+-RW UJ890.Since I bought the computer I have sometimes had difficulty burning DVDs with the built-in Windows 7 burner function that I access from Explorer. Often in the past I have ended up with partially written DVDs. Nevertheless by using high-quality DVDs I have been able to burn DVDs successfully most of the time using the Windows 7 utility. I last used the utility successfully a couple of months ago when I burned a couple of DVDs to backup some photos.
Since yesterday I have been trying to backup my most important files onto DVDs. The attempt has failed in every case. First I copy about 3 GB of files from drive C: onto drive D: in Explorer. These are several hundred files divided into three different directories, consisting mostly of PDF, Word, Excel, and JPG files, some of them with names in foreign scripts like Cyrillic, Japanese, or Chinese. Then I insert a new DVD (either Verbatim or TDK) and attempt to master the DVD by selecting the option �write to disk� from the Explorer menu (whether from the menus at the top of the screen or by right-clicking on drive D: in the lefthand pane of the screen). A window pops up asking me for the name of the disk, whether I want it to be �flash� or one-time only, and the recording speed (8x, 4x, 2x, etc.).
Once I click �continue� to start burning the DVD, a window pops up to tell me that Windows is making an image of the disk, and then the window tells me that it has begun mastering the disk, giving me a countdown of how many minutes are left (6 minutes to 11 minutes, depending on the speed I choose). But no matter what name I give to the disk and what recording speed I pick, after 30-60 seconds the popup window and the Explorer window both suddenly close and the DVD unit�s writing light goes out, but the DVD unit continues to whir at high speed forever.
Here are the results I got yesterday with 3 separate DVDs:
1. On the first DVD I used Windows 7�s burn utility on a Verbatim DVD, and I ended up with 28 files burned onto the DVD (making it unusable).
2. On the second try I used some simple burn software that I had used before � Roxio Burn � on a TDK DVD, and ended up with 4 files burned onto the disk (but from different folders than the 28 files burned by Windows 7).
3. On my third attempt, after going offline, shutting down my antivirus software (AVG), and using Task Manager to shut down processes from that other burn software, Roxio Burn, I used Windows 7�s burn utility again on a TDK DVD and ended up with the identical 28 files that had I ended up with the first time, though this time I had chosen a lower writing speed.
In all three of these attempts the DVD unit continued to whir after the windows had closed, until such time as I ejected the disk manually.When I first encountered this problem yesterday I thought the problem might be caused by my antivirus software � AVG Free Edition � interfering with the writing process, because after one particular automatic update by AVG about two months ago I began having problems with AVG blocking Skype and placing some of my Nokia cell phone software in quarantine. But by disabling the HIPS element of AVG I was able to resolve those problems several weeks ago and begin using Skype successfully again. But just to be sure, today I disinstalled AVG completely and installed Microsoft Security Essentials. Because I had read in a forum online that Windows 7 might have conflicts with other burning software that was also installed, today I also disinstalled the only burning software that I had installed � Roxio Burn � and did a cold reboot. Before attempting to burn a DVD again today, I also used Task Manager to shut down some other processes that didn�t seem necessary, such as a Nokia autolauncher and a Java autoupdate process. I also changed the time delay for Windows� sleep or power-save function to one hour.
I inserted a new TDK DVD, accepted the disk name proposed by Windows, chose for the disk to be permanent rather than flash, and chose a burning speed of 4x. After 30 seconds I received a popup window with the following message:
�ST Service Scheduling has stopped working.�I ignored this message and did nothing, because often in the past when I have succeeded in burning DVDs with Windows 7's utility I have had this message appear, but if I do nothing I almost always have the burn proceed successfully. In this case, though, after another 10-20 seconds the Explorer window and burning-countdown window both closed, the DVD light went out, but the DVD continued whirring at high velocity. The DVD unit did not respond to my pushing the expel button by hand, and when I tried to expel the DVD using Explorer I only got an error message, so the DVD could be expelled only by shutting down the computer.When I turned the computer back on, I discovered that no files at all had been written to this DVD.below are the details from the ST Service Scheduling error message (in Italian, sorry). Whenever I get these ST Service Scheduling error messages I get them twice, i.e., after choosing �Close� one time the same message immediately appears again and I have to choose �Close� a second time.
Nome evento problema:APPCRASH Nome applicazione:STService.exe Versione applicazione:1.0.0.64 Timestamp applicazione:4ae02c43
They were working then I rebooted the pc today and went to click on computer and nothing happens, the only thing is the little folder icon comes on the taskbar and that's it, it doesn't open.Also all of a sudden my events viewer doesn't work either, get this error, specified query is invalid 15001BTW system restore wasn't on, I guess when I fixed my booting problem it turned it off, the only drives that had restore enabled where my other 2 drives not the one I needed.
I have two pc's in my home. One running windows 7 32 BIT, and one running Win 7 64 bit. I created a home group on the laptop, as I want to grab some files from the laptop and bring over to the Desktop unit (the desktop unit is the one running 64 BIT win 7). Both machines have different names and the clock is set with the right time. When I create the home group on my Laptop, and select files that I want to share, the basic libraries ARE viewable on the Desktop machine.
I can see Documents, Picture folders, but I cannot open them! I can also change the password on the Laptop, and then PC will be able to enter the correct password to join the homegroup, so I know they can see each other. But again, not able to open the folders. If I go on my Laptop computer and "right click" on a folder, and then go to "share with"... the default is set to "nobody" with a lock icon next to it. If I select "Homegroup" it does not change! It stays locked with "nobody"?
On Windows 7 I installed the xbox 360 extender using Media Center, all my media files show up, but after exiting the extender, all my media files do not show anymore on their default windows folders for Pictures, Videos, and Music. Re-enter Media Center, and I am able to see all my media files, but unable to reach them through my PC, even after exiting again, and using my PC normally.
1- Advance searched my files to no avail, restored WMP library to no avail, restarted several times to no avail. 2- Used old Vista tricks in regedit to no avail, files still don't show up, they only do when I start the extender, and I see them through the extender only. 3- Restored to previous point in history on Windows to no avail. 4- Disabled WMP and WMC in Windows services and features, and re-enabled them, to no avail.
I think I might have picked up a virus. Anyway, after avoiding a crash , when going into my documents and then opening my pictures, there are no folders. But, when check "my pictures" properties, it list that I have 5,032 files using 6.32 gb. I tried to restore to different dates without any luck. I have also look at making sure it is not hidden
I imported my photos from my SDCard to my PC using Picasa 3, and everything was going smoothly... until I tried to take a look at the photos! all of the photos that I've imported using this method for some reason all became greyed out! Viewing them on Picasa3, all you can see is a grey rectangle, in place of the photos. However, when using the windows explorer folder, i can see that the photos were imported correctly (it's not just a grey box, but the actual photos), but when I try to open it (using any program: Paint, Picasa3, etc), it is still a grey rectangle instead of the photos. I tried to upload the image and send it via email, and I get the same result.In my mistake, I chose to "delete the uploaded photos after uploading" option..it's my vacation photos from Croatia I'm not sure if there were any errors when I imported it... i stepped out for a bit while I was waiting for it to import. I looked around my SD card, and looked at the "Lost.dir" folder, and copied all of what's in there.I did use Glarysoft to recover the images, and I'm using a Windows 7 laptop as my computer. Also, are there other alternatives? I did save the lost.dir with all of the photo files in it, both in my SD Card, and on my laptop.
change individual AVI icons. basically i have a DVD case template and i make ICO's for each movie and change each one with iconpackager 4.0
but it doesn't give me the "icon" tab when i right click on the movie file and select properties like xp. any way of changing each individual movie icon?
I have a few external drives that i don't always use and want to be able to have them shutdown when i am not using them. They shutdown when the computer goes into sleep mode but I would like to be able to make them shutdown (and power up) without putting the whole computer to sleep.
So I was wondering if there is a way to make a usb device think the port its plugged into is asleep in Win7 x64.
I've had three BSOD's in three days now all while playing either Skyrim and Dead Island. I have the three individual crash dumps attached.The video card I am using is new to the system and has had its drivers updated to Nvidia's latest (not those from the manufacturer's homepage).My guess is that I'm either having some kind of conflict with drivers here or that my PSU is inadequate but without being able to decipher the information in the dumps I can't tell. BSOD's are not my specialty at all but I don't want to simply ignore this.
Are there any functions or 3rd party programs that would allow me to search for text within an individual window? I am using a program that generates 1000's of pieces of data and information and it has no search function.
This happens pretty often to me... out of several "Important" updates available for download/install, one or two will have their checkboxes blank, so they are not selected for installation automatically.I can't detect a pattern of which ones are left blank. It always worries me a little, wondering if that particular update was left blank for a reason. I'm running a customized version of Windows 7 64-bit, so maybe the customization has something to do with it, but I can't see how a tweak that was performed before I even installed the OS can have impact on which updates are defined as "automatic".What does it mean for an update to have a blank checkbox in Wondows Update?
I just installed Windows 7 Ultimate x64 on my Samsung R519 laptop. I have noticed that the touchpad is more sensitive vertically than horizontally. Is there anywhere I can change individual axis sensitivity in Windows 7?
I have 3 monitors set up technically although one is my 54'' TV to play movies on while I work and play. Ultimately what I would like to do is while I'm playing movies and not using the other monitors (such as laying down to take a nap or playing movies with friends) I want to have a screensaver display on the unused monitors. I'm not sure if this is actually possible with a movie up on the TV but if anyone has any idea of a program i could use
I'm also running windows 7 ultimate if that matters any to you...
When i pass over the icon of firefox on my toolbar at the bottom of the screen( unsure of its real name but the bar with the time and start icon) each and every tab shows up separately. just today i repartitioned my hardrive, and before the reinstall it only showed whatever windows were open, no matter how many tabs were in each.If there is any way i can return it to the old state that would be fantastical, i find it much easier to keep track of my browser and the windows i have open
I vaguely recall that when I first got on Windows 7 I was able to do the new feature taskbar rearrangement with all items on the bar, but currently when I try to move one explorer item it wants to move them all, which means I can put a program to the left or right of all explorer windows, but I can't move an explorer window opened later left of any earlier one. Is that a standard limitation? is my memory failing me, or have I maybe changed some feature that does allow explorer items on the taskbar to be shuffled amongst each other, rather than being effectively attached to each other in their present order?
I have certain files and folders that I would like to distinguish from others, without creating a new folder. (I have enough folders as it is.) Is there a way to make individual file name fonts look different than others (bold, color, italics, etc)? I would prefer not to use a 3rd party file manager: I read that if a file is compressed, the file name turns blue. If it is not possible to do what I am asking above, is there any downside to compressing the files I wish to distinguish, so their file names will turn blue?
In Office 2003, users were able to change the colour of an individual Calendar entry which was within a series. As far as I can see Office 2010 does not allow this.
29th September 2012 Edit: Updated is a well known windows 7 / adobe bug which has [UR;}
So I've not long migrated from XP to 7 and I've noticed that every time I watch or stream audio my Adobe Flash Player 11 which I like to set to 50% in Volume Mixer jumps up to 75% which makes the audio playback distorted & poor sound quality.
How do I get it to stay at 50% ? Usually I do like to set volumes to 75% which is what I've got my Realtek Device set to but Adobe crackles and sounds bad at 75% so I have to set it to 50%
I have a problem getting Media Center to display my Photos showing the individual photos contents of each folder.I am running Windows 7 HP 64 bit with all updates. My MEDIA (movies, music & photos) are on a separate hdd (M). Each of the media formats has it's own folder on the M drive, Movies, Music & Photos. I have no problem with the movies or the music. However, when I choose "pictures" in Windows Media Center only the individual photos folders are shown....no photos are shown in these folders. I see the individual folders but no contents. I have set up "Libraries" on the C: drive; Music, Video & Photos. When I click on photos in the "Libraries" all the photos folders are show each with it's own photos. I have "Shared" these libraries as well as each folder on the Media drive M. The format of the individual photos is jpg. I have run SFC/Scannow.
In "My Pictures" (only), the "New Folder" option on top is gone and no matter how much I try to arrange the pictures to view my "Subfolders" instead of viewing the pictures arranged by "Day" I can't.I just want that "New folder" option up again, and to view all the subfolders (Arranged by: Folder) I made instead having it "Arranged by: Day". I can still change the "Arranged by: ___" to any of these --->Month, Day, rating, tag.And yes, I've tried changing the "Arranged by: ___" to "Folders" but nothing shows up, except the 4 options I just listed