I recentlry installed windows 7 professional 32 bit on a travelmate5720 acer and when i 'm trying for example to install adobe flash player BSOD appears and you know the rest.My question is should I keep windows 7 and try to find the correct drivers, if there are any, or should I reinstall windows xp which were working fluently. Here is my zip file after bsod error finder and the report file but it's in greek
View 4 RepliesI have an Acer Aspire 5720. It is not listed on Acer's website as compatible with Win 7, however many other models with the same specs are. I have been able to find drivers for most of the hardware. The only ones I cannot locate are a Windows 7 x64 driver for both the Alps Touchpad and the Bison Crystal Eye webcam. I am an adventurous one, and have a solid backup, so I am going to try it anyway. I was just looking for any assistance in locating those two drivers.
View 1 Replies View RelatedI just uprated my Acer TravelMate 4060 laptop with Windows 7 x86 Ultimate. I found all the missing drivers besides Graphic driver. (Graphic chipset is Intel 915GM Express). and wherever I check, I couldn't find anything useful. As I understand there is no driver for Windows 7 out there that would suppose Aero. For now it is working on it's generic driver. So I was thinking that meybey there is a way to tweak it somehow.
View 1 Replies View Relatedi'm trying to find drivers for the my windows 7 enterprise 32 bit acer travelmate 7730G machine....installed a graphics driver but my hdmi only plays the picture on my tv , no sound and my shortcut keys(like the lock) don't work..
View 4 Replies View Relatedi don't find sound driver for acer travelmate 4600 for window 7,can u give me link?
View 7 Replies View Relatedthinking of putting windows 7 64bit onto my laptop, it needs formatting anyway but would it run Windows 7 ok?
Acer TravelMate 4230
Mobile DualCore Intel Core 2 Duo T5500, 1666 MHz (10 x 167)
System Memory 1014 MB (DDR2-533 DDR2 SDRAM)
Video Adapter Mobile Intel(R) 945 Express Chipset Family (224 MB)
Audio Adapter Realtek ALC883 @ Intel 82801GBM ICH7-M - High Definition Audio Controller [B-0]
It seems that when i want to paste a file to my usb, it says "the disk is write protected". but when I used the USB to another computer, i can paste files. . . I don't know why such thing happens, is it because I have to adjust a setting or something in my system that will allow me to copy files from my laptop to my usb?
View 1 Replies View RelatedI got an acer travelmate 6465WLMi running 64-bit Windows 7 and after some digging around I managed to get the smartcard and 4 in 1 cardreader to work with drivers from a different travelmate. Only problem I have now is that I can't find any 64-bit drivers for the fingerprint sensor. When I went to check the first time device manager showed it as an SMSC fingerprint sensor but checking their site didn't assist at all, any working driver? ([URL] didn't work although one site mentioned they're used in acer laptops...
View 4 Replies View Relatedcan't find an audio driver for my Acer Travelmate 8100..
Realtek ALC880(D) @ Intel 82801FBM ICH6-M - High Definition Audio Controller [B-2] PCI
any ideas please?
I just bought a new acer travelmate 5760-2434G64M laptop with windows 7 ultimate x64.Everything is perfect except the control panel harware and device doesnot show fingerprint device. also the Bio-protection software cannot detect the device.Device manager shows driver for Secure biometrics devices (EgisTec ES603).It shows the driver is up to date and working properly.I have tried installing the driver form the DVD provided and also from Acer website.
View 3 Replies View Relatedi have an acer travelmate 4200 and im trying to get the wireless drivers working, here is the drivers page i found, i tried a couple of the driver's, but i havent found any that work, Acer Support: Downloads & Support Documents - Notebook / TravelMate / TravelMate 4200
View 1 Replies View RelatedInspiron 17R 5720 preloaded with Windows 8 but my bosses mother would not be able to navigate through the tiles. I therefore installed all of the available drivers from dell.com and device driver cd.Last piece is to find the SM BUS CONTROLLER driver.Can someone point me in the right direction? Already tried intel.com and dell support (only supports laptop with preinstalled windows8 so I'm out of luck there).I know it Applies to: ChipsetIntel Management Engine Interface | Intel Management Engine
View 3 Replies View Relatedi have a acer aspire one 255 my windows is not working but it doesn't have a disk drive installing with usb dosn't work . can i take the hdd and install my windows on my sony vaio because has a disk drive.
View 1 Replies View RelatedI have ACER Aspire 1652 laptop which was preinstalled with XP it has a Centrino 1.73 G and 2 GIG of memory installed and 80 gig hard drive and I want to install Windows 7 but ACER do no longer supply any drivers for Windows 7 for chipset, graphics, LAN drivers for Windows 7. Does Windows 7 have the necessary drivers?
View 9 Replies View RelatedEach time I turn on my laptop it shows a little blue screen then quickly changes to a black screen. The black screen states that windows was not shut down properly and to try one of the sfe modes and those do not work. I do not have any back-up or restoral disks, so what can I do.
View 4 Replies View Relatedwhile i trying to install the flash player11 it often shows the message timeout.help me to install flash
View 3 Replies View RelatedWhat happens is that when I try to install windows 7 it gets to the "expanding files" and then I get the BSOD. It says: A problem has been detected, blah blah
PFN_LIST_CORRUPT
[WALL OF USELESS TEXT]
*** STOP: 0x0000004E
I would upload some crash file but I don't have an OS but I'm trying to get a high quality camera ASAP
System specs:
Motherboard: Asus M4A78T-E
CPU: AMD PHENOM II X4 3,0GHZ
RAM: [KINGSTON HYPERX DDR3 1600Mhz 4GB] x2
VGA: EVGA GTX470
I've been getting blue screens for the past 2 days everytime I try to install Diablo 3 or render game footage with a program. It also happened once for no reason.
View 9 Replies View RelatedI already have Win7x64 installed but right now is crippled by a virus. So instead of installing a anti virus program I just decided that I want to start anew and reformat everything and install Windows 7 fresh. So I throw the disc in and boot from it, it loads up some "files" and goes to the Windows 7 animation, then it blue screens. The error message that I get out of it says wimFsf.sys is the culprit and after that it says page_fault_in_nonpaged_area. I tried swapping out ram sticks, right now I have 2 2 gig rams in there,I tried taking one out, switching the spots, and even put 2 1 gig rams in there but nothing worked.
View 9 Replies View RelatedMy friends netbook crashed and I am helping her install windows 7 64bit. The install starts off fine; but at about the 50% mark I get a BSOD
KERNEL_DATA_INPAGE_ERROR Stop
0x0000007A
ataport.sys
I have installed Windows 7 professional on my daughters laptop, it seems to have installed ok, then its comes up with a blue screen with the following code STOP 0x0000007, and then restarts, I have tried system restore, reinstallation
View 5 Replies View RelatedI have managed to achieve the BSOD quite a lot, and have tried re-installing Windows 7 x64 on my computer three times today.
I have received the BSOD:
after trying to reformat my F: drive.
Uninstalling my Nividia drivers for a new one
After using Firefox for a while it just won't open and BSOD follows shortly after
I believe after installing Windows Live applications it startes to give me BSOD
After the first BSOD I start to get the error message:
Check filesums or somehting about the computed sums is not correct.
First thing, my build:
Board: Gigabyte GA-P55A-UD4
CPU: Core i7 870 @ 2,93 Ghz
Graphic: Sapphire AMD Radeon 8670 Mushkin 2x2Gb Red Culvert Kit @ 1600Mhz CAS 6-7-7-18
Seagate 320 GB SATA II HDD + WD Caviar Black 1TB SATA III HDD
Running: Windows 7 Ultimate
Trying to install: Windows 7 Ultimate
PSU: LC Power Arkangel 850W
I have Windows 7 Ultimate installed on my 320 Gb HDD and everything is running ok. I just bought a WD Caviar Black 1TB SATA III disk and I want to install Windows 7 there, since the disk is faster. Here's what happens. When I connect the disk (it is connected GSATA 3 connectors), the disk will be recognized in bios and in Windows, but wont show under My Computer. I figured it must be some software bug so I formatted the disk in diskpart (clean format) and installed Windows 7 on it. At that time the GSATA 3 interface was set to IDE mode. It ran fine but after installing a big batch of Windows updates, the system hung at windows startup screen. After restoring the system to a previous state (i.e. before the updates), the system booted up normally.
I didn't know what was wrong so I formatted again, and this time I set the GSATA 3 to AHCI mode, since I realized this is a better option. When installing in AHCI mode, the computer expands the windows files but when the system is restarted, I get a BSOD (code Stop 0x000000B4 video driver failed to initialize) at Setup is updating registry settings. I really want to use the AHCI mode, but I cant get the system to work in IDE either so its really a bugger. I have no idea what could be causing this as the system works fine when using the other disk. Can the BSOD be caused by the HDD? Anyway, I really want to start using the disk. I have tried installing Windows 7 from a dvd as well as from a USB key.
Recently I have been trying to upgrade one of our computers (Dell Dimension 9150/XPS 400) to Windows 7. While this Dell model is old, a brief search on the internet shows that several people have gotten Windows 7 to work on this model just fine, so I'm inclined to believe this should be doable. I have performed multiple clean installs of Windows 7 Professional (64-bit) on this desktop, but inevitably I will eventually start getting a BSOD. When the computer restarts, I get the notification "Windows has recovered from an unexpected shutdown" with the following details:
Problem signature: Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033 Additional information about the problem: BCCode: 24
BCP1: 00000000001904FB
BCP2: FFFFF88002AFF318
BCP3: FFFFF88002AFEB70
BCP4: FFFFF800028EC185
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1 Files that describe the problem: C:WindowsMinidump-52112-24616-01.dmp
C:UsersCherylAppDataLocalTempWER-40014-0.sysdata.xml Read our privacy statement online: Windows 7 Privacy Statement - Microsoft Windows If the online privacy statement is not available, please read our privacy statement offline: C:Windowssystem32en-USerofflps.txt
Here are download links to the files that "describe the problem": Minidump file & Sysdata file.
The BSOD is kind of a crap shoot; on some installs of Windows 7 it happens occasionally while on others it happens as soon as the desktop loads. The problem gets worse (or more likely to occur) the farther I progress in "setting up" the computer. Here is a general procedure I have been following:
1) Clean install of Windows 7 Professional (64 bit) on hardrive
2) Install all the Windows 7 Updates (the only drivers installed are those recommended via Windows Update as Dell offers none for this computer on Windows 7)
3) Install Microsoft Security Essentials
4) Install Microsoft Office Professional 2010
5) Install Microsoft Updates for Microsoft Office
6) Install other programs I need
One time I got all the way to step 6 and was ready to transfer backed up files to the desktop when I started getting a continual looping of the BSOD...with the most recent install, I only got to step 3 before the first BSOD occurred. I have tried running CHKDSK but that does not find anything nor seem to prevent any problems. I ran a memory test via advanced setup (where you press F8 while the OS boots) and that said something like "Problems were detected...you will need to contact your hardware provider" or something to that effect.
However, no specific information was revealed; perhaps a summary is supposed to come up once you reach your desktop but this was during an install where the BSOD was continually looping so I never could see the desktop for more than a few seconds. Reinstalling the original Windows XP OS doesn't seem to fix the problem; regardless of OS, drivers, or other programs installed, the BSOD inevitably shows up and does not seem tied to a specific update, program, or action.
i've just installed Windows 7 ultimate x86 on my new SERVER PC and i have BSOD when it expand windows files, so i choose install it's hard drive on an another pc, then i pull back the hard drive to my server and it's work and logging to my dekstop but it's just for a while when my server pc be BSOD again?
View 1 Replies View RelatedJust kind of confused about the BSOD errors. Just installed Windows 7 last night to this laptop and I immediately started getting them. I tried getting debugging tools to read the .dmp files, but that just wasn't working. Then I tried working with BlueScreenView and I accessed all the .dmp files that I've acquired, six in total. Each seemed to have different files highlighted red, though I noticed one file that all of them had been highlighted red; NT Kernel & Systems. My only guess to fix this problem would be to just reinstall Windows, or would there be an easier way to fix this problem?
View 2 Replies View RelatedI am trying to re-install windows 7 home x64. I keep getting 0x0000000A after starting up disk. I can't even start up my PC ether. I would like to get my pictures on my HDD before install.
View 2 Replies View RelatedFirst thing, my build: Board: Gigabyte GA-P55A-UD4 CPU: Core i7 870 @ 2,93 Ghz Graphic: Sapphire AMD Radeon 8670 Mushkin 2x2Gb Red Culvert Kit @ 1600Mhz CAS 6-7-7-18 Seagate 320 GB SATA II HDD + WD Caviar Black 1TB SATA III HDD Running: Windows 7 Ultimate Trying to install: Windows 7 Ultimat PSU: LC Power Arkangel 850W
Ok so here's the deal. I have Windows 7 Ultimate installed on my 320 Gb HDD and everything is running ok. I just bought a WD Caviar Black 1TB SATA III disk and I want to install Windows 7 there, since the disk is faster. Here's what happens. When I connect the disk (it is connected GSATA 3 connectors), the disk will be recognized in bios and in Windows, but wont show under My Computer. I figured it must be some software bug so I formatted the disk in diskpart (clean format) and installed Windows 7 on it. At that time the GSATA 3 interface was set to IDE mode. It ran fine but after installing a big batch of Windows updates, the system hung at windows startup screen. After restoring the system to a previous state (i.e. before the updates), the system booted up normally. I didnt know what was wrong so I formatted again, and this time I set the GSATA 3 to AHCI mode, since I realized this is a better option. When installing in AHCI mode, the computer expands the windows files but when the system is restarted, I get a BSOD (code Stop 0x000000B4 video driver failed to initialize) at Setup is updating registry settings. I really want to use the AHCI mode, but I cant get the system to work in IDE either so its really a bugger. I have no idea what could be causing this as the system works fine when using the other disk. Can the BSOD be caused by the disk? Note: I have tried installing Windows 7 from a dvd as well as from a USB key.
I installed 285.62 P08 Nvidia Driver from the Dell webpage two days ago and it was fine and everything was good after the restart from the installation. After finishing up my session, I noticed that there is a window update so I shut down and left the computer to do the updating on it's own. Today, I switched on my computer to look at my timetable for today and after that put it to sleep mode.
After "waking" it up, I was met with a BSOD after like 5 minutes of use. I then decided to system restore to before i did the updates. It still BSOD albeit it took a longer time before that happened. Right now im using Safe mode + Networking to type this message out. (The computer does not seem to BSOD in safe mode so far). I did the steps listed but I could not get the perfmon step working. "An error occurred while attempting to generate the report".
Specs:
Windows 7 64bit
OEM
About 7 months old both hardware and the OS
I triggered a BSOD in normal mode:
KERNEL_DATA_INPAGE_ERROR
STOP: 0x0000007A (0x0000000000000020, 0xFFFFFFFFC000009D, 0xFFFFFA800798E078, 0x0000000000000000)
Physical Memory Dump FAILED with status 0xC000009C
I have a problem with my laptop. It's 3 years old but it's still fuctioing verry vell, accept that every time I try to start it the BSOD apears, and that happens about 2-3 times the it start normaly.
View 12 Replies View RelatedMy new acer laptop suffer in bsod randomly, but rarely happened during gaming. It happen almost everyday. Manage to see "power state failure" during the blue screen. Find out a very weird dump file which is 899mb
View 2 Replies View Related