I created backup DVDs (5 of them) of my Windows 7 system, my notebook crashed, so I copied whole system from DVDs, it said everything is ok and 100% copied, but when I start my notebook, it just loads grey screen with mouse, LED indicator of HDD is not blinking so it looks like its not working. How can I figure this out? Sorry for mistakes if any, I am not native english speaking person.
View 3 RepliesCan I continue working on my computer whilst backing up to an external hd?
View 6 Replies View RelatedI have my Win 7 PC set to back up to an external HD and have yet to get a successful backup. The Action Center gives me the message:Windows Backup failed while trying to read from the shadow copy on one of the volumes being backed up.When I look in the event viewer, I find the following error: The backup operation that started at [date] has failed with following error code '2147942405' (General access denied error).I've searched for that error code but haven't found any useful info. I've confirmed that both the Volume Shadow Copy and SPP Notification services are running. I suspect file permissions may be involved. The files I'm backing up are on both the original C: drive and another internal drive I added.
View 5 Replies View Relatedi installed windows 7, and everything seemed to work fine.
installed a bunch of programs, they also all seem to work.
but then i decided to do some backups; i created the rescue cd using windows, and then cloned the hard drive also using windows 7.
but then i noticed the backup program, and decided to click on "set up backup"; nothing happens.
if i try the same from a disk drive/properties (ie click on backup there) nothing happens either.
any ideas? maybe something i installed broke this, but it seems like a pretty basic function to break like this.
when I go to control panel and chose backup I get an error saying the page failed to load.
View 2 Replies View RelatedI just replaced the internal hard drive in my laptop, and now I'm trying to set up Windows Backup to backup to an external hard drive. It always fails, giving an I/O device error. I looked for a fix to this, and everyone says to run chkdsk on both hard drives. I ran it on the internal (running Windows 7), and it was really slow (it ran all day, and I went to bed and the computer had restarted by the time I got up). Running it on the external from within Windows, it gets stuck very early in the process and won't proceed.
View 14 Replies View RelatedWindows 7 backup program will not work for some reason now. I tried sfc/scannow and it found nothing wrong, so now what?
View 3 Replies View RelatedA friend just got a new laptop running Windows 7 Home Premium. He had an old desktop computer with an external drive for backups. He is thinking of getting a new router with a USB port so that he can connect the external drive to the router and then setup automated backups to that drive from the new laptop. Will the built-in backup program in Windows 7 HP work with a network drive?
View 1 Replies View RelatedI was contemplating using a Raid 0 array as my primary C: drive with OS. I understand all the issues with that and do regular daily backups. I used to use Acronis which had no trouble with a raid array. But on this new build I was wondering if the built in backup tools would be able to image and more importantly restore my data to the array. My back up drive is not part of the array. I would guess that it would see it just fine from the OS and have no trouble creating the backup image, I am more concerned that if I had to use the rescue disk and reload the image whether or not the array would be visible to the restore disk.
View 8 Replies View RelatedHow can I get the Windows 7 Control Panel Backup & Restore link to work? When I click on it it does nothing
View 3 Replies View RelatedI have a very important question about files I copied on to a different drive.I copied all my data(user account) from my C drive to my E drive. The E drive already had data on it before and has plenty of room.I saw that the data was copied then I did a "Windows Easy File Transfer" of the same C User data and also put it on the E drive. The windows easy transfer made one file.Then I reinstall Window 7 Pro on to C drive. I booted up the computer and looked in the E drive for my data, but Windows changed that drive to F from E. I looked in F and there were the files, but I could click on them. I rebooted the computer and upon boot-up the computer wanted to do and chdsk on F and I let it. Now I cannot see those files that I copied before the reinstall, but I can see the other files that were on that drive. Also the used space does not add up to what the drive says, so I think the files are there, just cannot see them.how I can get those files back.
View 7 Replies View Relatedmy dad screwed up his computer somehow, so i took out the hdd and copied all his c:userusername files from his vista machine and then reinstalled windows 7. now i have all that data and his 1000s of files, but they're not like they were. now there are only a few files all tagged something like serdata123243895863823982374834293247238438.ms i know the data is there because they're the same size as it was whenever i copied them. anyone have any idea what the hell i do now?
View 8 Replies View Relatedif my current desktop - not just the picture but also the shortcuts and files on there- can be copied to a new profile? If so, how do I do this and have the programs work? Currently just have a new profile but haven't copied any of my files to it yet. Been having admin issues with the existing profile like not being able to do certain deletes, thumbnails not all showing. etc.
View 3 Replies View Relatedmy dvd drive can not read copied cds?
View 6 Replies View RelatedI just want to apologize in advance for this dumb question and if this is not the right place to post this or if this is something too random to help me with (I'll be honest with you, I'm not going to use my newfound knowledge for a good cause; I'm trying to hack into my dad's password-protected admin account from my limited account because the parental controls he set up on my account won't even let me save any pictures. I think it's ridiculous.) but I figured it was worth a shot. The title is pretty self-explanatory...I just need to know how to paste this certain executive file I copied into the System 32 panel. Let's hope this works so I can finally download Skype without the constant inquiring of my dad's admin password!
View 1 Replies View RelatedI recently got a new iMac so am trying to copy/move some files around. However ANY file i copy onto the hard disk (which is in NTFS format) are not visible in Win7. The folder into which i copied into is visible but shows size as 0 bytes, whereas there is around 1.7TB of data in that folder. ALl older folders which were created/modified in Win7 earlier are visible. If i attach the disk to the Mac, the the files are there.. Am using Paragon NTFS if that matters...
View 14 Replies View RelatedI am now sharing a computer with someone (we each have our own User Account). I copied all of my folders/documents that were under the Program Files folder on my previous computer onto an external drive.Can I now just copy those folders and paste them under the Program Files folder on the new computer I'm now sharing?
View 1 Replies View Relatedthe windows7 is copy and is not genuine
View 4 Replies View RelatedWhenever I select multiple photos from either a separate location on my hard drive or from my iPhone and paste them into a folder on my Hard drive, Windows will copy them and then just stop so I have to click Paste and check Do This For the Next * Conflicts and select Don't Copy and it will copy a few more photos.
View 9 Replies View RelatedI've tried to search this but have had no luck. My wife's computer has XP Pro 64-bit installed and she wants to try (again) to upgrade to Windows 7. I have 2 hard drives for her computer, the one with the XP OS is installed and the other with Windows 7 is waiting to be installed. I only planned on installing one HD at a time, but if I can install both and copy her user files and emails from one HD to the other, that would be an option too. Eventually I want to have just the Windows 7 HD installed and archive the XP HD in the safe.Several months ago she wanted to try Windows 7 but I anticipated that she may want to switch back to XP if she didn't like the new system. I bought a new HD and installed it in her computer, then installed Windows 7 Pro on it. The new system works fine and was updated to a current state as of several months ago. I realize there will be lots of Windows 7 updates to install, and I'm willing to spend the time necessary to do that. However, I'm looking for a short cut for installing all of her personal settings and Outlook email files from XP to Windows 7. I'm thinking that I could copy her entire User file from the XP system and after Win 7 is finally updated and current, paste that User account into Windows 7. MS Office 2003 is already installed on the new HD. I realize it won't be a 100% "one for one" swap and that I may have to tweak several settings from her XP User account, but is using the XP User account even feasible? If I can't paste her XP User account, can I copy her XP Outlook PST file onto a flash drive and then paste that PST file into Windows 7? I don't see why that wouldn't work, but there are a lot of issues that I'm not aware of. Does anyone have any better suggestions on how to import her personal settings and emails into Windows 7 on the new HD? P.S. I didn't realize this was my first post. I've been lurking and reading for quite a while. I live in the Largo, Florida area and have been very active in computers for several years, but just recently upgraded to Windows 7 on my personal computers. I'm getting more comfortable with Windows 7 each day, but now that I've broken the ice with this first post, I hope to become fairly active. I hope that I can eventually contribute to the forum. I'm glad to be here!
View 5 Replies View RelatedI have windows 7 on my HP desktop and i needed windows xp for a certain program for school so i created a partition of 40 GB and formatted it as NTFS... I booted the installation disk and it was loading setup and it said the thier is no disk drive or partitions so i booted 7 back up and Googled it and it said something about raid drivers and SCSI or something needing to be updated... so i booted into setup and noticed that my SAta controler or waterva it is was set to raid so i set it to IDE and booted it this time after loading setup fles my partitions were there so i selected the 40 gb partition and pressed install it copied seup files for Windows xp and said rebooting... it rebooted and all i see is ( _ ) <-- that thing blinking forever so what do i do i've been googling it for ever and cant find what i want so either what do i do to fix it and install windows xp so it's working or just get rid of xp and it temporary copied install files
View 4 Replies View RelatedI'm trying to back up my "data" drive to an external hard drive. The properties on the disk show that there is 910 GB of data on the disk. But, when I select all files on the drive (hidden files/folders shown), it only adds up to 899 GB. Even worse, when I begin copying files, only 835 GB is found and begins to copy. What could be causing this/how can I copy ALL my data? Running Windows 7 Professional x64 Drive contains media files (lots of media files), software installers, .iso files, backups, and system images. Plus a lot of other stuff. Image of drive + file information: [URL] Edit: Tried taking ownership of all files and directories, and allowing my user full control.
View 1 Replies View RelatedI have been trying to find a way for Windows Vista and 7 to use the Folder.jpg file in a folder as an album artwork icon (in lieu of a folder icon with skewed and obscured artwork), and since Windows no longer natively supports this feature, the best workaround I've been able to find is to replace the folder icon manually. This creates a desktop.ini file with an absolute path to the Folder.ico file I also have in each album folder. I then changed the desktop.ini to reference a relative path, like this:[.ShellClassInfo]IconResource=Folder.ico,0Here's where my questions arise:1. When I copy that desktop.ini to another folder with a Folder.ico file, Windows doesn't read it, even after restarting the computer. I've searched the web on this and have found thread after thread where people have the same issue, but no one seems to be able to resolve it without manually changing the icon, either through the Explorer interface or using the command prompt. Is there a way I can get Windows to read the manually-copied desktop.ini of every sub-folder in my music directory?
2. On a related note, when I copy my customized folders with the relative-path desktop.ini from my Windows Vista computer to my Windows 7 computer, the artwork doesn't show up there, even for the folders I got to look right in Windows Vista. Am I going to have to manually re-associate the desktop.ini every time I upgrade computers or reinstall the OS?The album artwork looks so good, but I don't want to go through hundreds of folders and manually associate the folder to read the desktop.ini file. That would take so long, and just the few I've done manually so far have killed my wrist.
This issue is absolutely frustrating. I recently did a reinstall of Windows on my Gateway LT20 laptop. I did so from the recovery console (Press F8 at boot, restore from recovery partition and retain user data).After the reinstall, I decided to Backup the rather large collection of personal files that I have on the C: drive. (Actually, this would be a second backup) As I began copying folders over to the external drive, permission dialogs would occasionally pop up......very odd as I am the sole user of the computer and am the admin. I noticed an "account unknown" set as the owner in the security tab and I figured that it was because the files were carried over from the previous install and the unknown account was just my admin account from before. So, I took ownership of each folder (and selected "replace owner on subcontainers and objects). Alas, I was still getting the UAC permission dialog when copying some subfolders. I said 'screw it" and just clicked "OK" to get on with the backup. This is followed by a "do you want to merge folder A with folder A?" dialog.
And so the folder begins copying to the new drive with it's subfoldersHere's the weird part:After I click "OK" the displayed amount of data left to be copied shows zero.....but it keeps copying data. And it just keeps going. The status bar of the copy dialog box shows a smaller amount of data to copy than there actually is in the source folder. And by the time the main folder is done copying, the resulting folder is larger than the original O-o What the deuce?! The properties dialog box tells me there is more files present than what's in the original folder.I.....I just want to copy my damn music and photos to a portable drive. Why do you curse me computer gods?!! *shakes fist at sky* I'm very confused and want to know why and how a source folder that is 18GB turns into a folder that is 28GB when copied.
I copied several large files (between 1 and 4 GB) from one USB hard drive to another. At the target destination several of the files had defects. They were in general not completely unreadable. Most could still could be opened but had clearly corrupted data. how can this be detected/prevented. Doesn�t Windows 7 have some kind of an integrity check when copying files? Also is there any good software to compare files for being exactly identical down to the last bit? Ideally with the capability to compare whole folder contents so that it hasn't to be done file by file.
View 8 Replies View RelatedGot this problem where I can't boot into Windows 7, but I can boot into other things like Linux and Hiren's boot CD. I have access to all of my data on my internal hard drive, and would like to copy this to an external hard drive so that I can wipe the computer clean and reinstall Windows 7. How can I do this? I tried Puppy Linux, but I was unable to do stuff with the external HD as I got errors saying the external HD was write-protected.
View 4 Replies View RelatedI have recently been using some .bat tools to speed up searches in root directories.The tools search for the files in a list.txt, and copy them to a new folder which appears on my desktop. It has been working, until I used a new version today.It copied the files correctly, but I could not see the new folder appear on the desktop. I searched for it and found it where it should be, C:UsersEvanDesktopWhy does this folder exist, but not appear visually on my desktop? is it an error in my.bat file or something else
View 2 Replies View RelatedI copied a folder with C# .NET programs from my Windows XP machine to my new Windows 7 machine. However, on Windows 7 the folder has a lock symbol on its folder icon and I can't use any of the programs in it, although I can browse the folder and subfolders within it.I right-clicked on the folder and checked permissions. They were all grayed out.I added my individual username and selected Full Control, and the check marks for that username are now in full black (not grayed out). I went into Advanced and selected "Replace all child object permissions with inheritable permissions from this object" which is unchecked by default. I clicked "Apply" and "OK." But I still can't use any programs in subfolders, and the root folder still have a lock symbol on it. The propagation did not take effect, as all security checkmarks are grayed out on subfolders.
View 1 Replies View RelatedI have tried to copy a complete file heirarchy from one drive to a folder on another drive but found several files and folders are not being copied.
There is no report of files missed or any kind of error message.
I am actually trying to copy the contents of a friends hard drive onto a backup drive since he is getting a new computer and wants to ensure nothing is lost. I have mounted his internal 2.5 sata drive in a caddy and am copying it to my computers second internal drive.
I expected not be be able to copy certain system files. I also expected I might not to be able to copy some of his personal files due to the standard windows system protection (I am system administrator on my PC whereas of course he was administrator on his PC where the files and folders were created which I thought might be an issue). When I first tried to view some folders I was asked by the system if I wanted to allow permanent administrator priviliges to them (namely his personal directory under "Users" ). I replied yes and was thereafter allowed to descend into and view those files. Now when I copy the entire heirarchy of some 35GB I find the new folder is only 15GB. It is not just down to any compression as I have confirmed that there is only about 1/3 of the expected number of files to what was in the original. I have since tried individually copying some of the sub-folders that were missed and they copy fine on their own. As you can imagine, trying to dentify what has copied and what has not is a mammoth undertaking.
Now Windows 7 does not start from the new drive, I get "a disk read error occurred".Then I bootet from a Windows 7 rescue CD and used these commands without success:bootrec /fixmbrbootrec /fixbootI even recovered the BCD with these commands:Bcdedit /export C:BCD_BackupBootrec /rebuildbcdI have no clue what else I could do now. The partition is marked active. The Windows 7 partition is readable from within Linux, I can see everything there. I ran chkdsk from the rescue CD with no success.
View 7 Replies View RelatedMy setup: Windows 7 Pro (locale: Polish) and a NAS drive (D-Link DNS-323) attached via a router. Just recently upgraded from XP to 7. The NAS drive reports an NTFS partition.The problem I've just discovered: when copying files to the NAS drive, if a filename contains certain characters, such as curly quotes, angle quotes, bullet characters, subscript characters, em-dash etc., only the short 8.3 filename gets copied to the NAS drive.(I would not sweat it if the troublesome characters just got dropped, but what happens is that meaningful filenames are replaced with gibberish as above.)I use the NAS drive as a backup/mirror location for the local drives, so this is a big issue, since my backups are now severely clobbered. I discovered the problem while testing my backup regime, then found out the filename change occurs no matter how the files are copied - whether it's the backup application, a file manager or just Windows Explorer.And (of course) the problem did not occur when I was running XP, and nothing on the NAS drive changed since I installed 7 a week ago. Files that were previously copied onto the NAS drive (under XP) still show up fine, which tells me that 7 is actively interfering with the copy operations.
View 2 Replies View Related