Not All Files Being Copied/not Appearing In Properties
Apr 24, 2011
I'm trying to back up my "data" drive to an external hard drive. The properties on the disk show that there is 910 GB of data on the disk. But, when I select all files on the drive (hidden files/folders shown), it only adds up to 899 GB. Even worse, when I begin copying files, only 835 GB is found and begins to copy. What could be causing this/how can I copy ALL my data? Running Windows 7 Professional x64 Drive contains media files (lots of media files), software installers, .iso files, backups, and system images. Plus a lot of other stuff. Image of drive + file information: [URL] Edit: Tried taking ownership of all files and directories, and allowing my user full control.
In terms of security on my computer it leaves a concern; i just want to known if its safe to have these unknown accounts and they're not for example a remote hacker of some sort especially when the last "account unknown" is related to a network of somesort that has access to files on my computer through a network/proxy which does concern me quite a bit and i hope not... although ive done some brief research on unknown accounts each forum is telling me a different story. If its any relation there was a standard user account that was created on windows 7 but has been deleted im just wondering if any one of them accounts has any relation to the unknown accounts.
I have a very important question about files I copied on to a different drive.I copied all my data(user account) from my C drive to my E drive. The E drive already had data on it before and has plenty of room.I saw that the data was copied then I did a "Windows Easy File Transfer" of the same C User data and also put it on the E drive. The windows easy transfer made one file.Then I reinstall Window 7 Pro on to C drive. I booted up the computer and looked in the E drive for my data, but Windows changed that drive to F from E. I looked in F and there were the files, but I could click on them. I rebooted the computer and upon boot-up the computer wanted to do and chdsk on F and I let it. Now I cannot see those files that I copied before the reinstall, but I can see the other files that were on that drive. Also the used space does not add up to what the drive says, so I think the files are there, just cannot see them.how I can get those files back.
I recently got a new iMac so am trying to copy/move some files around. However ANY file i copy onto the hard disk (which is in NTFS format) are not visible in Win7. The folder into which i copied into is visible but shows size as 0 bytes, whereas there is around 1.7TB of data in that folder. ALl older folders which were created/modified in Win7 earlier are visible. If i attach the disk to the Mac, the the files are there.. Am using Paragon NTFS if that matters...
I have windows 7 on my HP desktop and i needed windows xp for a certain program for school so i created a partition of 40 GB and formatted it as NTFS... I booted the installation disk and it was loading setup and it said the thier is no disk drive or partitions so i booted 7 back up and Googled it and it said something about raid drivers and SCSI or something needing to be updated... so i booted into setup and noticed that my SAta controler or waterva it is was set to raid so i set it to IDE and booted it this time after loading setup fles my partitions were there so i selected the 40 gb partition and pressed install it copied seup files for Windows xp and said rebooting... it rebooted and all i see is ( _ ) <-- that thing blinking forever so what do i do i've been googling it for ever and cant find what i want so either what do i do to fix it and install windows xp so it's working or just get rid of xp and it temporary copied install files
I copied several large files (between 1 and 4 GB) from one USB hard drive to another. At the target destination several of the files had defects. They were in general not completely unreadable. Most could still could be opened but had clearly corrupted data. how can this be detected/prevented. Doesn�t Windows 7 have some kind of an integrity check when copying files? Also is there any good software to compare files for being exactly identical down to the last bit? Ideally with the capability to compare whole folder contents so that it hasn't to be done file by file.
I have recently been using some .bat tools to speed up searches in root directories.The tools search for the files in a list.txt, and copy them to a new folder which appears on my desktop. It has been working, until I used a new version today.It copied the files correctly, but I could not see the new folder appear on the desktop. I searched for it and found it where it should be, C:UsersEvanDesktopWhy does this folder exist, but not appear visually on my desktop? is it an error in my.bat file or something else
I have tried to copy a complete file heirarchy from one drive to a folder on another drive but found several files and folders are not being copied.
There is no report of files missed or any kind of error message.
I am actually trying to copy the contents of a friends hard drive onto a backup drive since he is getting a new computer and wants to ensure nothing is lost. I have mounted his internal 2.5 sata drive in a caddy and am copying it to my computers second internal drive.
I expected not be be able to copy certain system files. I also expected I might not to be able to copy some of his personal files due to the standard windows system protection (I am system administrator on my PC whereas of course he was administrator on his PC where the files and folders were created which I thought might be an issue). When I first tried to view some folders I was asked by the system if I wanted to allow permanent administrator priviliges to them (namely his personal directory under "Users" ). I replied yes and was thereafter allowed to descend into and view those files. Now when I copy the entire heirarchy of some 35GB I find the new folder is only 15GB. It is not just down to any compression as I have confirmed that there is only about 1/3 of the expected number of files to what was in the original. I have since tried individually copying some of the sub-folders that were missed and they copy fine on their own. As you can imagine, trying to dentify what has copied and what has not is a mammoth undertaking.
I have a new computer with Windows 7 on it - and I want to copy the files from my old computer to my new one. I'm looking at copying about 300 GB worth of data.When I copy all files and insert them onto my new desktop, I notice that all of the date/time stamps are changed to today's date.Is there a way to preserve the date/time stamp for each file, so that it keeps the original one?
a number of backup copies of large files on external USB-connected NTFS drives differed from the source versions still on my hard drive. I also discovered that I could reproduce the issue with newly-copied files.Here are the specifics of the issue, following a series of experiments:
- On my system, copies of large files, files typically larger than 500MB, are corrupted (altered) roughly 30% of the time when copying them under Windows 7 64-bit to USB-connected NTFS-formatted external drives.
- No error occurs / no error message appears during the copy
- The file size of copy is always identical, whether or not data was altered during the copy process.
- File differences are confirmed via either the command-line "FC" command or a utility such as WinDiff
- The issue impacts copies made via the Windows GUI -OR- via command-line copy or xcopy
- The issue occurs with multiple external USB NTFS-formatted drives, no matter what make or model.
- Subsequent attempts to copy an affected file will ultimately yield an identical copy. This would seem to rule out interference by an external program such as an anti-virus program (and the only AV I am running is Microsoft Security Essentials)
- The USB drives involved pass error checks, and copies made to these drives on other (non Windows 7) systems produce identical copies
- So far, the third party utility "TeraCopy" manages to consistently produce clean copies, and therefore is a temporary workaround. This utility apparently works because it, by default, bypasses the NTFS memory caching operation used by the Windows 7 OS...a caching system which I have so far found no way of disabling.
- The problem does not appear to impact relatively small files (1 to 100MB or so). I have not found any particular threshold, but I have seen the issue impact numerous files in the 500MB neighborhood.
- The problem seems to date at least to the version of Windows 7 that was in release as far back as the Fall of 2010, as I discovered corrupted backup copies of files dating back that far. Again, the files are corrupted with respect to the original copy...NOT with respect to file structure itself.
why my system will no longer display the contents of my CD/DVDs? I have been going through some older CD/DVD (RW) that have various files on them, zip, jpg, txt, doc etc. Looking from Explorer 'Computer' the disk will show once inserted and state it has (for example) 23.2MB free of 702MB but when I select the drive to view the contents all I see is desktop.ini and nothing else. Strange since it recognizes the media has 23.2MB free which means there is data present.
Now, I absolutely know this system showed contents at one time (like yesterday)for anything I inserted to read. I've rebooted also. I can also move the media to another machine, running Linux ;-) and it displays the contents just fine. I have tried other media that I know I have recently written (from this system) and they show exactly the same thing now one file desktop.ini and that's it. I have seen this before under W2K, WXP and now Windows 7 but this system is brand new and much more modern hardware but never ever found a solution.
I have a collection of mp3 files which I save in E:MusicMP3 Files and then in sub directories by artist.Inside some of the particular artist folders there keep appearing files called folder.jpg which are obviously album coverart for the artist.My question is where on earth these are coming from, I do not put them there in fact I delete them when I find them but they often re-appear soon afterwards.
i want to change the properties of an album like artists,tracks etc.but i can'tthe properties, it wonti think the problem lies hereiwent to help and support and read the following note: The Remove Properties dialog box only removes properties that were added using Windows. If you added properties using a different program, you must remove those properties using that program.
I was trying to unhide some files and now I've gone and changed some permissions which has resulted in files being classed as hidden. I can see them (they're at 50% transparency) but how do i get them back to being normal?
2. Removed HDD to export data to a HDD on a Windows 7-32bit (HDD is a hitachi deskstar HDT722516DLA380)
3.Connected HDD to the laptop via a USB kit i bought
4.Everything seems fine
5.Attempt to move files -Access Denied-
Heres my problem everytime i try to move anything it says its denied i give it admin but it doesnt copy it anyway. I go to folder properties and set the security to allow "Everyone" Full control but it still wont work it says access is denied and i cant apply it. I can go into an individual file and set security settings there and be able to retrieve it however it is inefficient to try to do this to the next 3000 or so photos/files. Can anyone reccomend me what i should do? or perhaps theres a program that
I have been unable to share files. Not only between two computers both running Windows 7, which I'm trying to sync some files in (OneNote), but I can't even change the properties.
I've tried everything, from going into advances sharing settings in the drive and giving full permission, to just the basic right clicking on the file, clicking Share With, and trying to click Homegroup, or going into specific people, and no matter what, it just keeps saying Nobody, with the lock icon next to it.I have gone into the firewall and made sure that's not an issue...it just seems that no matter what, Windows just will not allow me to share ANY files in my documents folders.
I was trying to write properties to some music files. I have done it before to the same file on vista, but forgot to save so im redoing it. When I attempt to save what I have just entered I get this:
"An unexpected error is keeping you from applying properties to the file. if you continue to receive this error, you can use the error code to search for help with this problem.
Error 0x8007000D: the data is invalid.
I have all updates, and the files are good.
Any help would be great.
BTW I can write info to most file but some give me this error. They were all off the same backup hard drive, transfered at the same time and I have writen properties to these files before.
this may be similar to some of the problems already mentioned but: we are editing images as we have done thousands of times before but today for some reason when we hit it he apply button the image file disappears. We can restore the file but everytime today we try to edit the properties of the file
One of my .avi files got the extension twice, not able to play in vlc media player, but it plays smooth in Windows media player. I don't now how it happened, but tried to rename it, still appears the same. When I looked in to the file properties it says the file having extension,(.avi) (.avi).!!! Thought of converting the whole file to some other format, sadly video converting program not able to open as it says unknown format!!!
I have two computers running windows 7. One is a laptop, one is a desktop. Both are connected to the same router. The desktop is direct wired via ethernet, and the laptop is wirelessly connected.I set up a homegroup and successfully connected both computers to the homegroup.If I share one of the "Libraries" folders on either computer, it instantly shows up in the Homegroup folder where shared items should appear. Any other documents or folders that I share from either computer do not appear, no matter what I try.I right click, choose "share with" and then "homegroup read/write". It doesn't appear accessible from the other computer. I choose "specific people" and then add "everyone," "guest" and "homegroup" all with read/write, and it doesn't appear on the other computer.
How can I get Windows 7 to name copied files using the scheme "Copy of" (used in Windows XP and earlier) instead of the default scheme "- Copy", whenever a file is copied to the same directory as the original file?In other words, if you copy a file named "Foo.txt" in a directory to the same directory, Windows XP would have named that file "Copy of Foo.txt", but Windows 7 names the file "Foo - Copy.txt". I want the copy to be named "Copy of Foo.txt".There are several reasons why I prefer the XP style file name:
1. It is familiar :-)
2. I have existing files that use the XP style file names, and I want all my file copies to use the same naming scheme. I guess I can do a massive file rename across all my backups, but that would solve only one of my problems.
3. Most of my folders are sorted by name, and using XP style would sort all copies together. On other forums it has been suggested that one can simply sort by date (to get the copies sorted together), but that advice assumes that all copies are created after all other files are created, which is actually not often the case.
4. I often work with long file names, which means that the end of the file name is often obscured, unless I have wide windows (not always possible) and use lots of horizontal scrolling every time I want to select a file. Hovering over a file to get its full name is a cumbersome solution.
5. On other forums some have given the advice to always make copies in subfolders, but I often make copies or copies of copies while I work (it allows me to roll back or to check earlier versions of a file quickly, during my work), and using subfolders would slow me down tremendously (not to mention confuse me).
I know that when TeraCopy is made the copy handler, it renames files in a different way than Windows 7 does, though unfortunately not the way Windows XP did it. Also, if one installs a third-party directory program such as Opus, it asks for a file name every time a copy is made, but I need something that simply names the file correctly immediately.
I created backup DVDs (5 of them) of my Windows 7 system, my notebook crashed, so I copied whole system from DVDs, it said everything is ok and 100% copied, but when I start my notebook, it just loads grey screen with mouse, LED indicator of HDD is not blinking so it looks like its not working. How can I figure this out? Sorry for mistakes if any, I am not native english speaking person.
my dad screwed up his computer somehow, so i took out the hdd and copied all his c:userusername files from his vista machine and then reinstalled windows 7. now i have all that data and his 1000s of files, but they're not like they were. now there are only a few files all tagged something like serdata123243895863823982374834293247238438.ms i know the data is there because they're the same size as it was whenever i copied them. anyone have any idea what the hell i do now?
if my current desktop - not just the picture but also the shortcuts and files on there- can be copied to a new profile? If so, how do I do this and have the programs work? Currently just have a new profile but haven't copied any of my files to it yet. Been having admin issues with the existing profile like not being able to do certain deletes, thumbnails not all showing. etc.
I just want to apologize in advance for this dumb question and if this is not the right place to post this or if this is something too random to help me with (I'll be honest with you, I'm not going to use my newfound knowledge for a good cause; I'm trying to hack into my dad's password-protected admin account from my limited account because the parental controls he set up on my account won't even let me save any pictures. I think it's ridiculous.) but I figured it was worth a shot. The title is pretty self-explanatory...I just need to know how to paste this certain executive file I copied into the System 32 panel. Let's hope this works so I can finally download Skype without the constant inquiring of my dad's admin password!
I am now sharing a computer with someone (we each have our own User Account). I copied all of my folders/documents that were under the Program Files folder on my previous computer onto an external drive.Can I now just copy those folders and paste them under the Program Files folder on the new computer I'm now sharing?
Whenever I select multiple photos from either a separate location on my hard drive or from my iPhone and paste them into a folder on my Hard drive, Windows will copy them and then just stop so I have to click Paste and check Do This For the Next * Conflicts and select Don't Copy and it will copy a few more photos.