FIles Copied To 2nd Drive Gone?
Jun 21, 2012
I have a very important question about files I copied on to a different drive.I copied all my data(user account) from my C drive to my E drive. The E drive already had data on it before and has plenty of room.I saw that the data was copied then I did a "Windows Easy File Transfer" of the same C User data and also put it on the E drive. The windows easy transfer made one file.Then I reinstall Window 7 Pro on to C drive. I booted up the computer and looked in the E drive for my data, but Windows changed that drive to F from E. I looked in F and there were the files, but I could click on them. I rebooted the computer and upon boot-up the computer wanted to do and chdsk on F and I let it. Now I cannot see those files that I copied before the reinstall, but I can see the other files that were on that drive. Also the used space does not add up to what the drive says, so I think the files are there, just cannot see them.how I can get those files back.
View 7 Replies
ADVERTISEMENT
Feb 11, 2012
I copied several large files (between 1 and 4 GB) from one USB hard drive to another. At the target destination several of the files had defects. They were in general not completely unreadable. Most could still could be opened but had clearly corrupted data. how can this be detected/prevented. Doesn�t Windows 7 have some kind of an integrity check when copying files? Also is there any good software to compare files for being exactly identical down to the last bit? Ideally with the capability to compare whole folder contents so that it hasn't to be done file by file.
View 8 Replies
View Related
Feb 22, 2013
I recently got a new iMac so am trying to copy/move some files around. However ANY file i copy onto the hard disk (which is in NTFS format) are not visible in Win7. The folder into which i copied into is visible but shows size as 0 bytes, whereas there is around 1.7TB of data in that folder. ALl older folders which were created/modified in Win7 earlier are visible. If i attach the disk to the Mac, the the files are there.. Am using Paragon NTFS if that matters...
View 14 Replies
View Related
May 20, 2011
I have windows 7 on my HP desktop and i needed windows xp for a certain program for school so i created a partition of 40 GB and formatted it as NTFS... I booted the installation disk and it was loading setup and it said the thier is no disk drive or partitions so i booted 7 back up and Googled it and it said something about raid drivers and SCSI or something needing to be updated... so i booted into setup and noticed that my SAta controler or waterva it is was set to raid so i set it to IDE and booted it this time after loading setup fles my partitions were there so i selected the 40 gb partition and pressed install it copied seup files for Windows xp and said rebooting... it rebooted and all i see is ( _ ) <-- that thing blinking forever so what do i do i've been googling it for ever and cant find what i want so either what do i do to fix it and install windows xp so it's working or just get rid of xp and it temporary copied install files
View 4 Replies
View Related
Apr 24, 2011
I'm trying to back up my "data" drive to an external hard drive. The properties on the disk show that there is 910 GB of data on the disk. But, when I select all files on the drive (hidden files/folders shown), it only adds up to 899 GB. Even worse, when I begin copying files, only 835 GB is found and begins to copy. What could be causing this/how can I copy ALL my data? Running Windows 7 Professional x64 Drive contains media files (lots of media files), software installers, .iso files, backups, and system images. Plus a lot of other stuff. Image of drive + file information: [URL] Edit: Tried taking ownership of all files and directories, and allowing my user full control.
View 1 Replies
View Related
Nov 25, 2012
I have recently been using some .bat tools to speed up searches in root directories.The tools search for the files in a list.txt, and copy them to a new folder which appears on my desktop. It has been working, until I used a new version today.It copied the files correctly, but I could not see the new folder appear on the desktop. I searched for it and found it where it should be, C:UsersEvanDesktopWhy does this folder exist, but not appear visually on my desktop? is it an error in my.bat file or something else
View 2 Replies
View Related
Jul 12, 2012
I have tried to copy a complete file heirarchy from one drive to a folder on another drive but found several files and folders are not being copied.
There is no report of files missed or any kind of error message.
I am actually trying to copy the contents of a friends hard drive onto a backup drive since he is getting a new computer and wants to ensure nothing is lost. I have mounted his internal 2.5 sata drive in a caddy and am copying it to my computers second internal drive.
I expected not be be able to copy certain system files. I also expected I might not to be able to copy some of his personal files due to the standard windows system protection (I am system administrator on my PC whereas of course he was administrator on his PC where the files and folders were created which I thought might be an issue). When I first tried to view some folders I was asked by the system if I wanted to allow permanent administrator priviliges to them (namely his personal directory under "Users" ). I replied yes and was thereafter allowed to descend into and view those files. Now when I copy the entire heirarchy of some 35GB I find the new folder is only 15GB. It is not just down to any compression as I have confirmed that there is only about 1/3 of the expected number of files to what was in the original. I have since tried individually copying some of the sub-folders that were missed and they copy fine on their own. As you can imagine, trying to dentify what has copied and what has not is a mammoth undertaking.
View 5 Replies
View Related
Jan 15, 2013
I have a new computer with Windows 7 on it - and I want to copy the files from my old computer to my new one. I'm looking at copying about 300 GB worth of data.When I copy all files and insert them onto my new desktop, I notice that all of the date/time stamps are changed to today's date.Is there a way to preserve the date/time stamp for each file, so that it keeps the original one?
View 3 Replies
View Related
Sep 20, 2012
I was lucky to grab a recent image backup from a failing 1.5 TB drive. Can I restore it to a smaller drive if the available space on the original drive was well below 1TB?This is the first time ive had to work with this particular image file. I have restored from backups before, just not this type of image.
View 9 Replies
View Related
Nov 25, 2012
my dvd drive can not read copied cds?
View 6 Replies
View Related
Jan 26, 2012
a number of backup copies of large files on external USB-connected NTFS drives differed from the source versions still on my hard drive. I also discovered that I could reproduce the issue with newly-copied files.Here are the specifics of the issue, following a series of experiments:
- On my system, copies of large files, files typically larger than 500MB, are corrupted (altered) roughly 30% of the time when copying them under Windows 7 64-bit to USB-connected NTFS-formatted external drives.
- No error occurs / no error message appears during the copy
- The file size of copy is always identical, whether or not data was altered during the copy process.
- File differences are confirmed via either the command-line "FC" command or a utility such as WinDiff
- The issue impacts copies made via the Windows GUI -OR- via command-line copy or xcopy
- The issue occurs with multiple external USB NTFS-formatted drives, no matter what make or model.
- Subsequent attempts to copy an affected file will ultimately yield an identical copy. This would seem to rule out interference by an external program such as an anti-virus program (and the only AV I am running is Microsoft Security Essentials)
- The USB drives involved pass error checks, and copies made to these drives on other (non Windows 7) systems produce identical copies
- So far, the third party utility "TeraCopy" manages to consistently produce clean copies, and therefore is a temporary workaround. This utility apparently works because it, by default, bypasses the NTFS memory caching operation used by the Windows 7 OS...a caching system which I have so far found no way of disabling.
- The problem does not appear to impact relatively small files (1 to 100MB or so). I have not found any particular threshold, but I have seen the issue impact numerous files in the 500MB neighborhood.
- The problem seems to date at least to the version of Windows 7 that was in release as far back as the Fall of 2010, as I discovered corrupted backup copies of files dating back that far. Again, the files are corrupted with respect to the original copy...NOT with respect to file structure itself.
View 6 Replies
View Related
Aug 22, 2010
My setup: Windows 7 Pro (locale: Polish) and a NAS drive (D-Link DNS-323) attached via a router. Just recently upgraded from XP to 7. The NAS drive reports an NTFS partition.The problem I've just discovered: when copying files to the NAS drive, if a filename contains certain characters, such as curly quotes, angle quotes, bullet characters, subscript characters, em-dash etc., only the short 8.3 filename gets copied to the NAS drive.(I would not sweat it if the troublesome characters just got dropped, but what happens is that meaningful filenames are replaced with gibberish as above.)I use the NAS drive as a backup/mirror location for the local drives, so this is a big issue, since my backups are now severely clobbered. I discovered the problem while testing my backup regime, then found out the filename change occurs no matter how the files are copied - whether it's the backup application, a file manager or just Windows Explorer.And (of course) the problem did not occur when I was running XP, and nothing on the NAS drive changed since I installed 7 a week ago. Files that were previously copied onto the NAS drive (under XP) still show up fine, which tells me that 7 is actively interfering with the copy operations.
View 2 Replies
View Related
Mar 17, 2012
How can I get Windows 7 to name copied files using the scheme "Copy of" (used in Windows XP and earlier) instead of the default scheme "- Copy", whenever a file is copied to the same directory as the original file?In other words, if you copy a file named "Foo.txt" in a directory to the same directory, Windows XP would have named that file "Copy of Foo.txt", but Windows 7 names the file "Foo - Copy.txt". I want the copy to be named "Copy of Foo.txt".There are several reasons why I prefer the XP style file name:
1. It is familiar :-)
2. I have existing files that use the XP style file names, and I want all my file copies to use the same naming scheme. I guess I can do a massive file rename across all my backups, but that would solve only one of my problems.
3. Most of my folders are sorted by name, and using XP style would sort all copies together. On other forums it has been suggested that one can simply sort by date (to get the copies sorted together), but that advice assumes that all copies are created after all other files are created, which is actually not often the case.
4. I often work with long file names, which means that the end of the file name is often obscured, unless I have wide windows (not always possible) and use lots of horizontal scrolling every time I want to select a file. Hovering over a file to get its full name is a cumbersome solution.
5. On other forums some have given the advice to always make copies in subfolders, but I often make copies or copies of copies while I work (it allows me to roll back or to check earlier versions of a file quickly, during my work), and using subfolders would slow me down tremendously (not to mention confuse me).
I know that when TeraCopy is made the copy handler, it renames files in a different way than Windows 7 does, though unfortunately not the way Windows XP did it. Also, if one installs a third-party directory program such as Opus, it asks for a file name every time a copy is made, but I need something that simply names the file correctly immediately.
View 1 Replies
View Related
May 22, 2010
Is there a way to make SFC use the Windows 7 DVD for files to be replaced instead of the files on the hard drive?
View 9 Replies
View Related
Jun 4, 2012
I created backup DVDs (5 of them) of my Windows 7 system, my notebook crashed, so I copied whole system from DVDs, it said everything is ok and 100% copied, but when I start my notebook, it just loads grey screen with mouse, LED indicator of HDD is not blinking so it looks like its not working. How can I figure this out? Sorry for mistakes if any, I am not native english speaking person.
View 3 Replies
View Related
Apr 20, 2011
my dad screwed up his computer somehow, so i took out the hdd and copied all his c:userusername files from his vista machine and then reinstalled windows 7. now i have all that data and his 1000s of files, but they're not like they were. now there are only a few files all tagged something like serdata123243895863823982374834293247238438.ms i know the data is there because they're the same size as it was whenever i copied them. anyone have any idea what the hell i do now?
View 8 Replies
View Related
Feb 7, 2012
if my current desktop - not just the picture but also the shortcuts and files on there- can be copied to a new profile? If so, how do I do this and have the programs work? Currently just have a new profile but haven't copied any of my files to it yet. Been having admin issues with the existing profile like not being able to do certain deletes, thumbnails not all showing. etc.
View 3 Replies
View Related
Oct 20, 2011
I just want to apologize in advance for this dumb question and if this is not the right place to post this or if this is something too random to help me with (I'll be honest with you, I'm not going to use my newfound knowledge for a good cause; I'm trying to hack into my dad's password-protected admin account from my limited account because the parental controls he set up on my account won't even let me save any pictures. I think it's ridiculous.) but I figured it was worth a shot. The title is pretty self-explanatory...I just need to know how to paste this certain executive file I copied into the System 32 panel. Let's hope this works so I can finally download Skype without the constant inquiring of my dad's admin password!
View 1 Replies
View Related
Aug 8, 2012
I am now sharing a computer with someone (we each have our own User Account). I copied all of my folders/documents that were under the Program Files folder on my previous computer onto an external drive.Can I now just copy those folders and paste them under the Program Files folder on the new computer I'm now sharing?
View 1 Replies
View Related
Aug 6, 2011
the windows7 is copy and is not genuine
View 4 Replies
View Related
Dec 16, 2012
Whenever I select multiple photos from either a separate location on my hard drive or from my iPhone and paste them into a folder on my Hard drive, Windows will copy them and then just stop so I have to click Paste and check Do This For the Next * Conflicts and select Don't Copy and it will copy a few more photos.
View 9 Replies
View Related
Dec 20, 2012
I've tried to search this but have had no luck. My wife's computer has XP Pro 64-bit installed and she wants to try (again) to upgrade to Windows 7. I have 2 hard drives for her computer, the one with the XP OS is installed and the other with Windows 7 is waiting to be installed. I only planned on installing one HD at a time, but if I can install both and copy her user files and emails from one HD to the other, that would be an option too. Eventually I want to have just the Windows 7 HD installed and archive the XP HD in the safe.Several months ago she wanted to try Windows 7 but I anticipated that she may want to switch back to XP if she didn't like the new system. I bought a new HD and installed it in her computer, then installed Windows 7 Pro on it. The new system works fine and was updated to a current state as of several months ago. I realize there will be lots of Windows 7 updates to install, and I'm willing to spend the time necessary to do that. However, I'm looking for a short cut for installing all of her personal settings and Outlook email files from XP to Windows 7. I'm thinking that I could copy her entire User file from the XP system and after Win 7 is finally updated and current, paste that User account into Windows 7. MS Office 2003 is already installed on the new HD. I realize it won't be a 100% "one for one" swap and that I may have to tweak several settings from her XP User account, but is using the XP User account even feasible? If I can't paste her XP User account, can I copy her XP Outlook PST file onto a flash drive and then paste that PST file into Windows 7? I don't see why that wouldn't work, but there are a lot of issues that I'm not aware of. Does anyone have any better suggestions on how to import her personal settings and emails into Windows 7 on the new HD? P.S. I didn't realize this was my first post. I've been lurking and reading for quite a while. I live in the Largo, Florida area and have been very active in computers for several years, but just recently upgraded to Windows 7 on my personal computers. I'm getting more comfortable with Windows 7 each day, but now that I've broken the ice with this first post, I hope to become fairly active. I hope that I can eventually contribute to the forum. I'm glad to be here!
View 5 Replies
View Related
Mar 17, 2012
I have been trying to find a way for Windows Vista and 7 to use the Folder.jpg file in a folder as an album artwork icon (in lieu of a folder icon with skewed and obscured artwork), and since Windows no longer natively supports this feature, the best workaround I've been able to find is to replace the folder icon manually. This creates a desktop.ini file with an absolute path to the Folder.ico file I also have in each album folder. I then changed the desktop.ini to reference a relative path, like this:[.ShellClassInfo]IconResource=Folder.ico,0Here's where my questions arise:1. When I copy that desktop.ini to another folder with a Folder.ico file, Windows doesn't read it, even after restarting the computer. I've searched the web on this and have found thread after thread where people have the same issue, but no one seems to be able to resolve it without manually changing the icon, either through the Explorer interface or using the command prompt. Is there a way I can get Windows to read the manually-copied desktop.ini of every sub-folder in my music directory?
2. On a related note, when I copy my customized folders with the relative-path desktop.ini from my Windows Vista computer to my Windows 7 computer, the artwork doesn't show up there, even for the folders I got to look right in Windows Vista. Am I going to have to manually re-associate the desktop.ini every time I upgrade computers or reinstall the OS?The album artwork looks so good, but I don't want to go through hundreds of folders and manually associate the folder to read the desktop.ini file. That would take so long, and just the few I've done manually so far have killed my wrist.
View 4 Replies
View Related
Oct 10, 2012
This issue is absolutely frustrating. I recently did a reinstall of Windows on my Gateway LT20 laptop. I did so from the recovery console (Press F8 at boot, restore from recovery partition and retain user data).After the reinstall, I decided to Backup the rather large collection of personal files that I have on the C: drive. (Actually, this would be a second backup) As I began copying folders over to the external drive, permission dialogs would occasionally pop up......very odd as I am the sole user of the computer and am the admin. I noticed an "account unknown" set as the owner in the security tab and I figured that it was because the files were carried over from the previous install and the unknown account was just my admin account from before. So, I took ownership of each folder (and selected "replace owner on subcontainers and objects). Alas, I was still getting the UAC permission dialog when copying some subfolders. I said 'screw it" and just clicked "OK" to get on with the backup. This is followed by a "do you want to merge folder A with folder A?" dialog.
And so the folder begins copying to the new drive with it's subfoldersHere's the weird part:After I click "OK" the displayed amount of data left to be copied shows zero.....but it keeps copying data. And it just keeps going. The status bar of the copy dialog box shows a smaller amount of data to copy than there actually is in the source folder. And by the time the main folder is done copying, the resulting folder is larger than the original O-o What the deuce?! The properties dialog box tells me there is more files present than what's in the original folder.I.....I just want to copy my damn music and photos to a portable drive. Why do you curse me computer gods?!! *shakes fist at sky* I'm very confused and want to know why and how a source folder that is 18GB turns into a folder that is 28GB when copied.
View 1 Replies
View Related
Jun 16, 2012
Got this problem where I can't boot into Windows 7, but I can boot into other things like Linux and Hiren's boot CD. I have access to all of my data on my internal hard drive, and would like to copy this to an external hard drive so that I can wipe the computer clean and reinstall Windows 7. How can I do this? I tried Puppy Linux, but I was unable to do stuff with the external HD as I got errors saying the external HD was write-protected.
View 4 Replies
View Related
Oct 6, 2012
I copied a folder with C# .NET programs from my Windows XP machine to my new Windows 7 machine. However, on Windows 7 the folder has a lock symbol on its folder icon and I can't use any of the programs in it, although I can browse the folder and subfolders within it.I right-clicked on the folder and checked permissions. They were all grayed out.I added my individual username and selected Full Control, and the check marks for that username are now in full black (not grayed out). I went into Advanced and selected "Replace all child object permissions with inheritable permissions from this object" which is unchecked by default. I clicked "Apply" and "OK." But I still can't use any programs in subfolders, and the root folder still have a lock symbol on it. The propagation did not take effect, as all security checkmarks are grayed out on subfolders.
View 1 Replies
View Related
Jan 17, 2013
Now Windows 7 does not start from the new drive, I get "a disk read error occurred".Then I bootet from a Windows 7 rescue CD and used these commands without success:bootrec /fixmbrbootrec /fixbootI even recovered the BCD with these commands:Bcdedit /export C:BCD_BackupBootrec /rebuildbcdI have no clue what else I could do now. The partition is marked active. The Windows 7 partition is readable from within Linux, I can see everything there. I ran chkdsk from the rescue CD with no success.
View 7 Replies
View Related
Sep 2, 2010
It was bad in XP, but seems worse in Windows 7.Clipboard doesnt seem to hold onto last Copied item long at all. I will copy a string of text and if I I dont paste it very soon after it wont paste.Usually I hcopy a piece of text, and if I have to minimize a few windows or do too many keystroke before pasting it gets lost and I have to go back and re-copy it.Its just beuggier than expected for such a nice OS.
View 2 Replies
View Related
Feb 4, 2012
Im a newbee and i made a diskcopy from my HD 1 TB to LA Cie USB disk 1 tb.The source disk have a * hidden recovery part,C: aktiv bootD: data diskAfter copy disk I saw a differens in the aktive boot part on the target disk with aboNow I deleted the aktiv boot part on the target disk and made a copypartiation from the sorce disk to the target and now it became exaktly the same.y questions:Will this copy work allright if I have to copy back all the parts.Using Minitool 7.1 bootable CD didnt find my target disk so I used Minitoolver 7.0 bootable cd and it works ! Whats the problem with 7.1
View 6 Replies
View Related
Dec 18, 2009
I'm really hoping I find an answer to this question besides the one I've found on the internet a hundred times over (That's not a good idea, you shouldn't do it).
My question is: Is there a way to allow a user to create/edit files in the C drive (system drive), and in the Program Files contained there? Let's assume that this user is not only a local admin, but a domain admin as well.
The reason for this is I work for a company that does a lot of editing within these areas of Windows. We need to be able to create and edit files where they are stored. I know one way around we've found is to copy the item out of the folder, edit it, and put it back, but this is a pain in the butt.
I also know that most program need to "run as admin", so that's not the problem either. I've given this user every right and permission in the Security tab of the C drive, and had it propagate down through all files, folders, and sub-folders, and still I'm hit with an error that says "Access is Denied" or another one saying that I don't have the right privileges.
Please, if anyone knows how to change this in 7 it would be much appreciated. I know that this worked in XP, and I'm not looking for someone to tell me "this is a bad idea so don't do it", or "maybe it didn't work right in XP". I have seen enough of these.
UPDATE: I have been playing around with saving office and wordpad documents into the C drive, and into the Program files. It seems that I'm able to do both now (for some odd reason), but I still receive intermittent errors when trying to edit or copy/paste or cut/paste from one location to another.
View 5 Replies
View Related
Oct 27, 2011
I have Windows 7.i copy entire flash drive to a folder (Call it "RemovableDrive" folder under My Document) from flash drive (USB).In "RemovableDrive", folder, I right click and select Properties, then I uncheck READ ONLY, and select Apply to set all files and folder/subfolders to uncheck READ ONLY.
In the "RemovableDrive" folder, I opened a file, and edit it. Then I try to save it.it would not let me. I also set the property of the file to READ ONLY, but still has the same problem.
View 9 Replies
View Related
