BSoD Stop 0x0000007E Unable To Boot

Nov 21, 2011

Firstly, my apologies that I am making a thread as a first post, I hate to do it but am pulling my hair out at the moment.After reading through the BSOD posting instructions I have a small issue. As I cannot get further than just before the windows logo appears due to this BSOD, I cannot (that I know of) post a crash dump of the issue.I am currently attempting to build a crash repair DVD from my laptop, but am also looking at using the USB method.

View 9 Replies


ADVERTISEMENT

Blue Screen Of Death - STOP: 0x0000007E

Jul 17, 2012

2 days ago after I closed off my laptop lid, my laptop went into hibernation mode. After that, the laptop is having some trouble trying to wake up. I remembered I saw an error message saying something like "Windows has failed to wake up from hibernation". So I have no other choices but to restart. Ever since then, I start to get an error.

STOP: 0x0000007E (0xFFFFFFFFC0000005, 0xFFFFF880070C25C6, 0xFFFFF880009A8B78, 0xFFFFF880009A83D0)

[URL]

I can't get into Windows. Everytime I try, I will be presented with the blue screen of death. I tried booting in safe mode but in vain. I will get stucked at Classpnp.sys[URL]. I am using Windows 7 64 bit, Core i7, 8GB Ram, 2GB Graphics

View 7 Replies View Related

BSOD After Closing ITunes Error 0x0000007e?

Dec 31, 2011

I have:

Dell Laptop Inspiron 1440
Windows 7 Home Premium 64bit OEM Full
3 GB Memory (2 Gb and 1 Gb sticks)
On board video
On board sound
Intel Dual Core Processor

After I removed an iPod from my laptop I never had installed before I got the BSOD after I restarted the computer. The message stated "Windows failed to start a recent hardware or software change may be the cause". I have tried startup repair from the OEM disc and have had no luck after 5 or more tries. I can boot into safe mode fine and connect to the internet. It will not start normally. The two options you get are start normally or launch startup repair and both of these fail when attempting. It always shows the error code 0x0000007e but some of the code in the parathensis change each time I boot the computer.

View 5 Replies View Related

BSOD (Error 0X0000007e) When Wake Up Display

Mar 14, 2012

Since I update my nvidia graphic card driver to the last ver 296.10 i got a BSOD 0X0000007e, every time I turn my screen on (I don't have sleep mode or hibernate mode or screensaver active). As long as I using the computer everything fine, but if I don't using the computer for several hours and move the mouse to turn on the display I get this error.

I try to download some hotfix from microsoft that related to this issue but it say in every try: this hotfix don't match to your computer.
KB Article Number(s): 979538
KB Article Number(s): 983615

OS: windows 7 ultimate 32 sp1
CPU: Q6600
Memory: ddr2 2 giga
Graphics card: nvidia 8600 gt

View 3 Replies View Related

BSOD Immediately Upon Windows Startup 0x0000007E

Jul 13, 2012

I have no dump files because the comp crashes almost immediately upon reaching the boot screen, and I don't know how to access them without windows explorer. So, I wrote down as much info as I could. I've tried startup repair multiple times, and I've tried system restore, neither work. Startup repair shows that all system tests are successful up to the System File Integrity Check and Repair, then it fails and gives:Error code 0x490 Unknown bugcheck: Bugcheck 7E. 0x0000007E (0xFFFFFFFFC0000005, followed by 3 other random ones each time.)System Restore gives error 0x80070067When startup repair fails, and the option to send data appears, the following problem info is shown.

Event: StartupRepairOffline
Signature1:6.1.7600.16385
Signature2:6.1.7600.16385
Signature3:unknown
Signature4:21200211

[code]....

View 3 Replies View Related

Can't Boot SSD Anymore - BSOD / STOP: 0x0000007b

Nov 18, 2012

I have a decent PC (i7 2600, 16gb ram, SSD + 2HDDs, etc). I've been using it for about a year.Since it's a work machine, in the last few weeks, I've been using VMware on it to use other experimental software, with no problems.Today, I tried to create a new VM and the software asked me to update it to a new version. I did it, create new VM and rebooted to change a config in the Bios (about virtualization). But when I tried to boot again, surprise: BSOD.

STOP: 0x0000007b, (0xFFFFF880009a9928, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)

When I got back to the BIOS, I found the boot order to be different. I fixed it but no good. I disconnected the other HDDs and all I got was a different boot error message. I plugged the SSD in another machine and it worked fine?

View 13 Replies View Related

Random Boot And BSOD Memory Management Stop 0x0000001A

Jun 27, 2012

I have been experiencing random reboots which very often fail and occasional BSOD crashes, the last one refers to memory management. I am running Panda cloud antivirus and malwarebytes.Original OS was preinstalled retail version win xp proff. Current OS full retail version win 7 64bit home premium Hardware new Dec 2006. Dual boot 2 x sata hard drives?

View 5 Replies View Related

Unable To Boot Into Windows 7 Without BSOD

Aug 23, 2012

Attached is all of the information. This is a new build, completed on saturday with a fresh install of Windows 7. I have ran memtest86 for 4 hours, completing 4 passes with no problems. I have reinstalled all motherboard drivers. I tried using driver verifier a few days ago and was unable to boot into windows without a BSOD. Was able to boot into safe mode to disable it. Have either been browsing on firefox, idle, or in a random application during each BSOD.

I have not yet had a BSOD while in safe mode (with or without networking). The BSOD tend to happen fairly often, with the longest time in between one occurring almost 20 hours. That only happened once, however, as all the other ones occurred within 5-10 hours of the computer being turned on. The next step I was going to take if I can't get a good answer would be to either reformat or do a "repair install" which I'd have to read up on before trying it.

View 9 Replies View Related

Cannot Connect To Printer, Error 0x0000007e

Nov 13, 2012

I am unable to connect my computer with a Network printer in my organization. I am running Windows 7 Home Premium-64bit on my laptop. The problem here is, when I try to add a new printer as:Devices and Printers> Add a Printer> Add a network, wireless or Bluetooth printer.The wizard searches for a few seconds than my LAN automatically gets disconnected.The other way round I've also tried to manually add the printer but it didn't work. It gives the error "Cannot Connect to Printer. Error 0x0000007e" The printer in Network is RICOH Aficio 8001 PCL6.I've tried to contact my IST department but they are saying that we are also unable to connect it with 64-bit operating system.

View 2 Replies View Related

Stop 50 Bsod

Jan 12, 2010

i have a asus p7p55d deluxe and ocz gold dual channel 1600mhz. page file in non-paged area how do i fix bsod?

View 5 Replies View Related

[BSOD] Keeps Crashing And Cant Stop It?

Jun 29, 2012

theese they have been happening non stop now. Im using windows 7 64bit

View 1 Replies View Related

Bsod Stop 0x000000f4?

Dec 13, 2011

a friend let me borrow their computer while mine is being de-bugged. samsung 64bit w7 and i had paused a movie at hulu while i took a phone call. i come back like 5 mins later to see the bsod with stop 0x000000f4 (0x000000000000003, 0xfffffa800850db30, 0xfffffa800850de10, 0xfffff800031848b0)physical memory dump failed with status 0xc0000010i've started back up in safe mode, but what happened? is there anything i need to do? can i go back to regular mode

View 1 Replies View Related

Getting STOP 0x00000124 BSOD?

Feb 5, 2012

Getting STOP 0x00000124 BSOD, doesn't seem to matter what I'm doing - sometimes playing Dragon Age Origins, sometimes surfing on Firefox, sometimes running iTunes.

system info:
x64
originally Vista, free upgrade to 7 (purchased just before 7 was released)
~2.5 years old
OS installed ~2 years ago

View 9 Replies View Related

Stop Error 116 BSOD

Nov 5, 2009

The OS is crashing when viewing a flick in TVU Player. So far, this is the only time this occurs, I can watch a variety of other video apps without any problem (knock on wood). What I did find searching seemed to point to a general concensus that the root of the problem was the Nvidia driver, but those posts were over a year old, and I would hope that Nvidia would have gotten it straight by now.

The process mentioned in the BSODs is nvlddlkm.sys, which obviously is part of the nvidia drivers. I'm currently using the latest Nvidia driver, and it didn't sound like going back to an older driver was likely a solution.

Since this appears to only effect TVU Player, one might think that it is the culprit, but I have tried several different versions of it without an improvement. Bottom line is whether anyone has any relevant suggestions, other than just stabbing in the dark?

View 3 Replies View Related

Windows Cannot Connect To The Printer - Operation Failed With Error 0x0000007e

Jul 14, 2011

I have a Dell laptop with Windows 7 Ultimate. While trying to add a network printer (HP LaserJet 4250n) I got the following error message: Windows cannot connect to the printer. Operation failed with error 0x0000007e.

The printer works fine from my Windows 7 Pro desktop, and also from other laptops with Windows 7 Ultimate.

I've tried installing Microsoft's hotfix (982728), installing locally on LPT2 and running 'net use LPT2 \Computernamesharedprintername /persistent:yes', updating the driver. None of these worked.

View 4 Replies View Related

How To Fix BSOD And STOP Code 0x0000001E

Jan 31, 2013

My OS is Windows 7 Home Edition 64bit. Recently I'm learning to make videos and my routine is editing the raw file in Windows Movie Maker then adding some effects to it in Adobe After Effects. I've been doing fine for months until suddenly the blue screen appeared. At first the problem only occurred occasionally when I tried to import to or export from WMM. But then it happened more and more often even when I was doing nothing until it reached the point where my computer couldn't even make it to windows anymore. I took my friend's advice and reinstall windows but that didn't fix the problem.

View 1 Replies View Related

BSOD With 0x0000010d Stop Error

Aug 12, 2011

My computer hasn't blue screened in a while, and this time it's a different error, I'm pretty sure. I zipped and attached my minidump file.

View 2 Replies View Related

BSOD STOP 0x0000003b Error?

Apr 23, 2012

I've encountered this crash around 6 times in the last few days, always when running games: Star Trek Online [throuh Steam], Neverwinter Nights 2 [through Steam] and Sid Meiers Pirates.I have filled in as many of the system details as I can to the profile - if more are needed, please tell me how to get the information.I also attach reports from CPU-Z, the Minidump and what I can from SF Diag Tool.The most recent changes I have made to my computer are: Defragmentation C drive. Windows 7 defrag. 10 passes. 22/04/12 approx 1400-1800GMT Uninstall multiple games 22/04/12Install driver for Logitech N305 Wireless NumberPad approx 5/04/12 [This component works correctly]It's been suggested that it may be a fault with the GPU - apparently, the driver from it was last updated 29/07/09. I'd prefer not to fiddle with it until we're sure that that caused the problem, which first arose around a month ago.

View 1 Replies View Related

BSOD - Multiple With Different STOP Errors?

Feb 4, 2012

I have been trying to resolve some BSOD I got on my PC. To do this I also re-installed windows several times. I build and install everything by myself for years, but this is the first PC with a lot of BSODs. I used the Debugging Tool for windows to check the minidumps by myself, but as far as my knowledge goes, I didn't find anything special in there. The only thing that was obvious was that in all BSODs the ntoskrnl.exe was involved. This was something BlueScreenView revealed also. In my opinion however it seems there is more to it, since the ntoskrnl.exe could probably also crash because of another driver or hardware problem.On my previous fresh Windows 7 Install I did found out once that alot of BSOD I had at that time were caused by a bad Creative driver for my X-Fi. On the web I found a useful hint, because other X-Fi users pointed to the beta-drivers for the card. The official Creative drivers are almost two years older then these beta drivers, so obviously the beta drivers should be the first choice. These drivers are the ones I use now. I also had some problem with my OCZ Vertex 3 MI, like most owners of this hardware, and the problem was the unstable firmware. I am using the latest firmware now, which is 2.15, and that made the system alot more stable. The third problem is happening in POST: my logitech G110 keyboard features an USB hub and connection for media. These kind of USB keyboards had some problem with recognision and initialisation in the UEFI BIOS. For that I also updated to the latest BIOS for my motherboard.

All in all you can see I discovered and tried to fix a lot of different causes for BSODs. I also ran memtest once on the system for two hours, but this was in Dual Channel setup. Didn't gave any errors anyway.The latest minidump is created by the use of Verifier. I turned verifier on to test the two drivers for my AMD HD6970(crossfired). After 5 minutes in windows the BSOD appeared. I am using AMD Catalyst 12.1 drivers. I tried this, because the BSODs all are different then the ones I had on previous Windows 7 installations (on the same pc), but the only thing I changed in the current installation, was the AMD 12.1 drivers.I reinstalled windows about two weeks ago, after using Secure Erase on my SSD. I installed only the latest drivers for all the things that need drivers. The complete installation, including windows updates and drivers, was without any fault. One day later the first BSOD appeared, etc. I use the system to play Battlefield 3 only, since the fresh install. Strangely, I played more then 50 hours in the game, without any crash or BSOD! The new AMD FX-8150 processor is the first to support native 1866 MHz DDR3. The motherboard specification showed that the board supported 1866 (OC), thus it's seen as an overclock. I set all settings in bios like the ram specificiation told, which is: 9-11-9-27 2T @1.65V. Still, it could be that the 1866 MHz is too much on standard NB voltages? It's something I couldn't find an answer to on the internet, and since I never overclock I don't have that much experience with the voltages.

All BSODs happened in different situations, like just after windows log in, or when I start a program, or when idling, or when browsing the internet.Since I couldn't figure out any more usefull details out of the minidumps, I hope someone here with more experience could check the attached files.

View 3 Replies View Related

BSOD Computer Stop On Sleep?

Feb 20, 2012

I have a new Asus N53SM running Windows 7 64. I have installed no extra hardware outside of a mouse and a external hard drive and it stopped yesterday, probably on going to sleep.I have done your steps 1 to 5 but the step "perfmon /report" fails to write the html file, I tried it three times including from the dos prompt as admin. This is my second asus in a week. If I can't fix it I will replace with something else.

View 8 Replies View Related

BSOD STOP: 0x00000050 / PAGE_FAULT_IN_NONPAGED_AREA

Dec 21, 2009

I just built my first computer and am now attempting to do an install of Windows 7 Professional (64 bit). I am encountering BSOD during the install.

I downloaded the ISO and burned it to disc and had BSOD issues. At first I thought possibly that it was the ISO or the burn, but now I am using a disk that has been used successfully on other computers.

My specs are as follows

Gigabyte P55-UD4P (F3 bios)
Intel i5 750
4 GB of Crucial DDR3 RAM (2x2GB)
WD Caviar Black 640 GB Hard drive
Sapphire Radeon 5850HD

I have adjusted the BIOS to boot to the DVD drive first. In addition, the BIOS came not set to AHIC (I think that is what it is called. I heard that it can cause problems.) I have made no changes in the BIOS.

I have encountered BSOD at different times. First I got it during the Windows 7 installation, at 1%. Now I've gotten it before you are even able to select the language to install it in (the first screen you are presented with I believe).

I have gotten different errors, but unfortunatly I only wrote one of them down, the most recent. It says "PAGE_FAULT_IN_NONPAGED_AREA" and the tech info says: "STOP: 0x00000050"

I really don't know exactly where to start to troubleshoot this. I really don't know if it's a hardware or software issue.

View 3 Replies View Related

BSOD Stop Error: 0x0000007B?

Mar 23, 2012

I needed to reinstall windows on my laptop, but I had to recover some files from the hard drive, so I took the hard drive out and connected it to my desktop PC. I installed the windows on the hard drive using my desktop PC too, because the laptops DVD ROM doesn't work anymore. I successfully installed windows on it, everything worked. I put the hard drive back in the laptop, booted the laptop and it popped up a BSOD saying:Check for viruses on your computer. Remove any newly installed hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK/F to check for hard drive corruption, and then restart your computer.Technical information:***STOP 0x00000073(OXFC8D3640), 0xC0000034, 0x00000000, 0x00000000

View 3 Replies View Related

Windows 7 BSOD Stop Code 124?

Apr 13, 2012

what this following error code means? I'm guessing it's some kind of hardware failure but I can't figure out what. I bought a new western digital caviar black 1TB hard drive, installed it with Sata cables and installed Windows 7 ultimate on it and it worked fine for a couple of days. All of a sudden today I get this error. I should mention that the reason why I decided to replace the hard drive is because my other hard drive(s) were fine until one of their sata cable broke in half and even tho I replaced the sata cables on those drives they still won't boot and would cause BSOD's. So, I decided to buy a new drive and new cables and try it.

Technical information:***Stop: 0x00000124 (0x0000000000000000, 0xFFFFFA8005B3E028, 0X00000000B2000000, 0X000000000004008F)

View 8 Replies View Related

BSOD Stop Code 3b, Unclear Cause?

Oct 20, 2012

I have been getting a BSOD every couple days. The error is a system_service_exception with stop code 3b. (STOP: 0x0000003b (0x00000000C0000005, 0xFFFFF9600010D010, 0XFFFFF88E011B40, 0x000000000000)To explain further, I have had this exact same error on TWO different computers, one of them completely new, while running the same combination of programs/drivers. They are both Stop code 3b with Parameter 1 the same, 0x00000000C0000005 (though Parameter 2 and 3 are different for each time the BSOD comes up). The two computers have different graphics drivers, so I believe graphics drivers can be ruled out as the problem (one is a AMD Radeon 6750M, the other is an Intel HD Graphics 4000). The graphics drivers are also updated. They are both running Windows 7, one is a Lenovo ThinkPad x1 Carbon, the other is a Macbook Pro running Bootcamp (I blamed bootcamp for the problem, which is why I got the new computer, but it seems that it is not the problem).

In both cases, I am running a 30" external monitor via a DVI-D to Displayport adapter, made by Accell (with additional USB powering). I believe this may be the problem, because after several days not using the monitor I did not have the crash. This is not conclusive though, because it normally only crashes every 2-5 days, but I think it may be a good place for a knowledgeable person to start. However, I used the computer for many months without any crashes with this external monitor, and it has only been crashing in the last month.I am also running a Logitech external trackball mouse and have a somewhat new Brother printer and it's associated drivers. I have Nod32 ESET antivirus, updated to the most recent version. I'm also using a program that uses a PostGreSQL database, and am running several applications at a time (not graphics intensive but I believe it does use up a fair amount of resources). For the most part, the crash has only happened after a couple hours of use. I have had all of these things installed and running on both computers when they crashed.

According to BlueScreenView, on both computers the error is caused by driver win32k.sys, caused by address win32k.sys+7d010. The crash address is ntoskrnl.exe+7efc0.My plan is to keep using the computer(s) without the external monitor, and see if they ever crash. If the monitor is the cause, I would hope for some solution that would allow me to use the monitor (I'd be willing to buy a new adapter if it might make a difference).I can't figure out how to upload the .dmp file, so you can find it here on another post of mine: http://windows7forums.com/blue-scr [...] post275928

View 3 Replies View Related

0x00000116 Stop Error - BSOD On New Build

May 30, 2012

I finished building a day trading PC and had a BSOD last night with a 0x0000016 stop error. The minidump is attached. System Specs:

AMD A6-3650
Asus F1A55-M LX Plus M/B
8 GB DDR3 Ram
Sapphire Flex Radeon HD 6450
2 WD HDD's in RAID1
SeaSonic M12II 620 Bronze PSU 620Watt
3 Asus Monitors

Clean Install Windows 7 HP x64 with Important updates
Catalyst 12.4 Drivers

View 2 Replies View Related

Regular BSOD With Stop Message Of NTFS

Nov 26, 2011

Been regularly getting BSOD with STOP message of ntfs for a few weeks now. I have attached the zip file and also a screenshot. I am running Windows 7 Home Premium x64 retail upgrade. Installed about a year ago. The original operating system was Vista ultimate. I have upgraded the motherboard driver today and haven't had the BSOD since (touch wood) but not 100% that it was that.

View 3 Replies View Related

BSOD (Stop Code 124) While Browsing Internet

Dec 7, 2011

I encountered a BSOD while just browsing the internet, I managed to get the STOP code of 124 though before it cleared. I HAVE been having some issues with my HDD not maintaining constant speeds during file transfers, so maybe its a HDD problem?

View 4 Replies View Related

BSOD/GraphicCard Flickering/Stop Responding?

Dec 16, 2011

Windows 7 is. . . - x64 Ultimate - the original installed OS on the system? Nopeelf Built - an OEM or full retail version? I got it from college... - OEM = came pre-installed on system - Full Retail = you purchased it from retailer -What is the age of system (hardware)? a year .... - What is the age of OS installation (have you re-installed the OS?) Just recently installed, a few weeks ago

View 8 Replies View Related

Frequent BSOD Stop Code 0x00000124

Mar 7, 2012

Recently I have been experiencing frequent BSOD. Below and attached is the latest one.

View 1 Replies View Related

BSOD High Svchostexe Usage How To Stop It

Mar 12, 2012

If I were to stop the scvhost.exe task, the BSOD wont appear. That's all i know of the symptoms.

View 1 Replies View Related

BSOD All The Time, Error Stop: 0x00000124?

Apr 29, 2012

so lately ive been getting BSOD all the time,i cant play a game more than 15 min before i get BSOD, and when im surfing it takes a little bit longer but after an hour or two of doing NOTHINg on the computer, i still get bluescreen. i dont know what to do, i think its the graphic card that is messing with me. because if i touch it, i almost get burnt, its really hot. error code is stop: 0x00000124 (0x0000000000000000, 0xfffffa8007c9c028, 0x00000000f2000000, 0x00000000002008f) ive never posted here, nor do i know alot about this

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved