i wanted to wipe my computer and reinstall windows 7 to have a clean slate. I downloaded windows 7 from Digital River and saved to a usb. i have a legal windows key purchased form MS. during the install i performed a hd "clean" through cmd. upon start up i got the bsod but was unable to capture the error. the SF diganostic file is attached.
i am using a dell 1420 with windows 7 64 bit.
Windows 7 told me it had downloaded SP1. I set it to install and it said it would take 30 minutes so i walked away from the laptop.
I came back, and now I get BSOD very time i switch it on.for some reason i can't download the system file collection app, but i have zipped minidump.attached minidumpB is without any system config, normal windows startup with graphics adapter disabled,attached minidumpRestrict is with 'selected startup' with windows services disabled and no startups. with graphics adapter disabled.Both of them enter BSOD shortly after startup, after the windows icon has come, and when you would usually expect the wallpaper to appear.safemode works fine.windows 7 professional 32bit. laptop 2 years old. 6 months ago I had mother board fried and when i got laptop back repairer had partitioned hd into C:
System D: 1.11gb free of 1.46gb
HDDRECOVERY 544mb free of 5.63gb
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.256.48
Locale ID:2057
[code]....
i used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer , the start-up at least took half an hour at that time and the service pack 1 installation showed "not successful " i tried to again to update the service pack1 which showed 73.6mb - 892.6mb so i updated it again and again the same thing happened.
View 7 Replies View RelatedThe installation is done from dvd and worked just fine.
Win 7 Home premium
mainboard Asus M2R32-MVP with bios update v 1109
OCZ PC2 6400 2 GB (have 2 of those took 1 out for installation)
Nvidia Geforce 9800 GTX+
AMD Athlon 64 X2 dual core 4000+
Barracuda 7200 SATA 250gb harddrive (ST3250820AS)
DvD/cd TSSTcorpCD/DvDW SH-S183A
as well i unhooked all usb devices
clean install, worked fine, but after install, the desktop would come up and nothing was working after, just freezes up.
Specs:
Toshiba laptop
Win7 home premium 64-bit
3gb RAM
freshly formatted hard drive
original media from Toshiba with win7
I am trying to completely wipe this laptop off and start fresh. The recovery partition has been removed as part of my search for a resolution for the problem. When I try to install windows 7 on this machine I start by selecting to format the entire hard drive. It completes this and then starts the installation of windows 7. It take a very long time for windows to unpack the files and copy them to disc. After about an hour and a half it starts asking me for the User name/location/time settings, etc.
After that it reboots to startup windows for the first time. It immediately tells me that windows cannot start and startup repair will need to be run or I can select to ignore this and try to start normally. Either option yields no improvement. After working with each of those options I just decided to reformat the drive and start the install again. Even after the drive was wiped and fully formatted I get the same error once the windows installation finishes.
i just recently started getting BSOD at windows startup, ive attached a Windows_NT6_BSOD_jcgriff2 file.
View 2 Replies View RelatedI have an Acer 3400 desktop. Tonight, its started BSOD.
When I start it - the Windows 7 splash screen appears, after a few seconds, every time, the BSOD appears. The error comes up very quickly (far, far too quick for to read).
I've tried booting from a different HDD (I'd did a Windows clone a while back to a (hybrid) SSD, so tried booting from the original HDD) - but still get the same problem - so I'm assuming not a Windows corruption or HDD problem?
he Bluescreens began after i installed Windows 7 64Bit Ultimate on my Computer, before that i had used Windows 7 32 bit Ultimate and i hadn't any problems. I installed the latest driver for all my components, but this didn't help. I also ran Memtest86+ with no ram errors. The Bluescreens appears often when I'm playing Starcraft 2 or Battlefield Bad Company 2.
Here are the my System Specs:
Motherboard: Gigabyte GA-870A-UD3
Processor: AMD Phenom II X4 955
Graphic Card: AMD Readon HD 6870
Memory: Geil Value Plus DDR3 PC3 1066 1333MHZ 4GB Kit
Power supply: Cougar SE 400
I have attached the minidump files, the RAMMon-SPD-Info, an the CPU-Z Memory InfosRAMMon - SPD Info.txt
I try to install Windows 7 on computer with Windows XP SP3.After step of loading files I get the BSoD with following error:STOP: 0x0000005C (0x0000010B, 0x00000003, 0x00000000, 0x00000000).When I run the Windows 7 Upgrade Advisor, it no reports about any problem with installation ability.Here is hardware configuration[CODE]
View 9 Replies View RelatedI'm trying to install Windows 7 Home Professional 64bit on my computer. Everything appears to go fine during the custom installation. After the setup gets to installing updates, the computer restarts. However, the computer inexplicably cuts power to my monitor, and after around 4 minutes the monitor will briefly flash back on to display this BSOD:This will flicker for about five seconds before the power to the monitor is cut off again, and another four minutes pass before the BSOD flickers on again. I've tried to use the "Repair Windows" option at the beginning of Setup, but that doesn't work either. It just says Windows can't find anything wrong. If I start Windows normally or on Safe Mode (with or without networking/command prompt) it says that the installation didn't finish and I need to restart the installation. I've tried to reinstall Windows 7 several times now, and all attempts end at the BSOD. It looks like that nvlddmkm.sys file is the root of the problem. This is being installed over a Linux Ubuntu OS, but I've since deleted the partitions. In the past this computer has also had Vista on it with absolutely 0 problems?
View 2 Replies View RelatedFor some reason, my clean installation on my HTPC still boots with the old Vista startup screen (the green scrolling bar). I really like the new one that 7 has with the floating colors that come together to form the "windows" logo that works fine on my other machines. I did notice that I would always get the Vista logon when my desktop was dual boot, but now that I've eliminated all Vista installations, I get the 7 startup screen - thus I was surprised to see the old green bar show up on my HTPC, seeing as though the only OS that's on it now is Windows 7 7100 (which works GREAT!).
My HTPC has 3 drives in it, one for Media, one for extra storage (is completely empty now) and one 80GB drive for the OS. (Interestingly enough, the "Media" drive (E:) is listed as the "System" drive, even though I did the installation with all the other drives unplugged.
Is there a way that I can fix this so I get the Windows 7 startup screen?
I bought a SSD Samsung 830 128gb and i tried installing windows 7 x64 on it, but everytime i try to launch the installation, i get a BSOD with STOP 0x0000007E right after the spinning Windows logo appears. I tested the HDD and the RAM and they passed all the tests. Also, i tried launching a Ubuntu live usb and i was able to use the pc without problems.I thought the issue might be related to some mobo drivers, so i installed the latest UEFI but it didn't solve the issue. Resetting CMOS didn't solved it either.[CODE]
View 4 Replies View Relatedi have recently ordered a lappy ASUS K53SV-SX520D from flipkart. the specifications are i5 second Generation processor. it came preinstalled DOS. i tried to install the windows 7 ultimate 32 bit. and i installed successfully. But some problem arose i guess the reason is that i created 3 partitions while installations and from Disk Management i created another volume. of the remaining unallocated space.now when i started the lappy m not able to BOOT. its just the blank screen with a blinking curser. i have tried many times but failed. peoplesolve this problem. its a new laptop and m no even able to start it even once.secondly. someone suggested me to delete the partitions while instaling the Win 7 again. i tried that too.. but all the options to delete, format, new, are in gray. i mean m not able to delete those 4 partitions.
View 1 Replies View RelatedMy home pc is currently running windows xp, it was turned off without shutting down and has since shown a bsod when it is starting up. This occurs in safe mode aswell as regular startup. I was advised to try repairing using my xp disk, or reinstalling the os I cannot find my XP disk but I do have a new retail copy of 7 home premium 64 bit. I was hoping I could fix the problem with that. I have changed the boot priority in BIOS to the DVD drive but it doesn't load, the disk spins up for a few seconds before spinning back down. This repeats for approx 30 seconds before giving up and booting the hard drive.
View 4 Replies View RelatedI have no dump files because the comp crashes almost immediately upon reaching the boot screen, and I don't know how to access them without windows explorer. So, I wrote down as much info as I could. I've tried startup repair multiple times, and I've tried system restore, neither work. Startup repair shows that all system tests are successful up to the System File Integrity Check and Repair, then it fails and gives:Error code 0x490 Unknown bugcheck: Bugcheck 7E. 0x0000007E (0xFFFFFFFFC0000005, followed by 3 other random ones each time.)System Restore gives error 0x80070067When startup repair fails, and the option to send data appears, the following problem info is shown.
Event: StartupRepairOffline
Signature1:6.1.7600.16385
Signature2:6.1.7600.16385
Signature3:unknown
Signature4:21200211
[code]....
I can only run Windows 7 Home Premium (different computer than the one I'm posting from) in safe mode. When I try to use the Diagnostic Tool, it says that it is saving the files but then it doesn't finish up with giving me the folder on my desktop. How I can get the files to show so that I can attach them to this thread?
View 3 Replies View RelatedI've recently began building my first custom-built computer, I began with an old Compaq Presario that a friend gave me, and I've pretty much gutted it and replaced all its components. The components I've replaced have included the motherboard, processor, hard drive, RAM and PSU (I'll include the specifics of my set-up below). I've been trying to install Windows 7 but have been getting the blue screen (BSOD) before the installation could complete. The BSOD said "PFN_LIST_CORRUPT" towards the top of the screen. I'm fairly sure that I've installed all the new hardware correctly. The following is the new hardware I've installed:
Processor - AMD Phenom II (3.2 GHz)
Motherboard - Ultra Durable 3 (GA-880GM-UD2H)
Hard Drive - Hitachi Deckstar 7K1000.C (1TB SATA)
RAM - Corsair 2 Gigs (2 sticks, 4 Gig total)
PSU - Logisys PS550ABK (550 Watts)
I was wondering if someone could help me out. I just recently installed a new copy of windows on my OCZ Vertex 3 90GB SSD. When the computer restarted to finish the setup, it gave me a BSOD for .5 second and then restarted my computer.I have it in my Bios that it's configured where it uses AHCI because for some reason IDE no longer identifies all of my SATA ports and what's plugged in them.I do not have a factory built PC. I have a Gaming Rig I've built myself. I'm simply at loss of ideas on how to fix this problem I'm having with this SSD. My stats are as follows:
[code]...
BSOD when Win7 is extracting the installation on setup
View 3 Replies View RelatedFor the last couple of weeks (I was just given the laptop) my friends Dell Inspiron has been Blue Screen of Death'ing on start then rebooting (loop on this) - I was able to see the BSOD when I disabled the "reboot on error" and all I get is the following: Blue Screen STOP: 0x0000007B.I cannot get into Safe Mode (same error) to get any dumps (at least I wouldn't know how)I tried Startup Recovery, Last known configuration, Restor points (many of them), Chkdsk, sfc, and bootsec but nothing seems to resolve the problem... The next step is a re-install from the Dell Recovery drive (I hope because I don't have the origial Windows 7 Dell Install CD),
View 4 Replies View RelatedI've been having increasing problems with my Asus g73jh. Love the performance, but been having random crashes concerning video i assumed. Updated the graphics drivers as well as ran a bios flash on the laptop. The unit always has a problem with being moved and I just moved it for the first time in around 6 months (been using it connected to my screen in living room) to bring to class and it crashed with a page fault error when I arrived at class, then again with another bsod when I got home and unpacked it.
[code]....
I have been getting the blue screen of death on my win 7 Dell desktop for about 2 weeks. I managed to back up all of my files onto an external hard drive , but then today started getting the same BSOD when starting up my toshiba win 7 home premium 64 bit notebook.
Since the BSOD on my desktop , I am unable to connect to the internet as it no longer recognises the wifi card in the PCI slot. So I will continue with the information from my notebook.
My system specs are:
Manufacturer: Toshiba
Model: Satellite L-650
Processor: AMD Phenom II P820 Triple-core 1.80 GHz
[Code].....
I am not computer savvy when it comes to these sorts of things. The heading states it all and am wanting a bit more of an insight at any problems that may be occurring etc.. Also, as of late I have noticed that my DVD player refuses at times to read a DVD movie or game title, and only after a few open / closes it seems to work. - x86 (32-bit) or x64 ? Windows 7 Home Premium 64 bit - the original installed OS on the system? As Above - an OEM or full retail version? Retail Version
View 3 Replies View Relatedwin 7 hangs on startup and freezes or BSOD 0x000000d1 within 1 minute usually. system runs fine if I boot to safe mode.no serious hardware or software changes around the time it started happening (that i recall) I didn't use my pc much for a few days and then the first time i noticed (around June 7th, 2012) I just logged in and there was a popup saying something like windows had recovered from an unexpected shutdown and the system was really slow and then it froze. Makes me think maybe a power outage corrupted something (i'm not on a UPS) or a windows update went badly. i tried to update several drivers in safe mode but none were succesfull. Catalyst Install Manager says: "Failed to load detection driver"sfc /scannow reported no violations perfmon /report gives me...."Error: An error occured while attempting to generate the report. The system cannot find the path specified. "My oldest system restore point says June 7th, 2012 so i did restore but it still has the problem.I built the system 1-2 years ago and haven't re-installed the OS since.
specs
Manufacturer: Myself
OS: Windows 7 Ultimate x64
CPU: AMD Athlon(tm) II X4 635 2.91Ghz
Motherboard: ASUS M4A88TD-V EVO/USB3
Memory: G Skill 2GB X2 (4GB)
Graphics Card(s):
Two ATI RADEON HD 5700's in Crossfire
Sound Card: ASUS M4A88TD-V OnBoard sound
Hard Drives:
One 100GB Seagate Barracuda ST3100011A on ATA with Windows 7
Two 1TB Western Digital WD10evds-63u8b0's on SATA in RAID1 for storage
PSU: Corsair 850w
Cooling: ?? cpu at 55 celcius at Idle
Keyboard: Microsoft Wireless MultiMedia Keyboard
Mouse: Microsoft USB Optical mouse
Internet Speed: 18 mb/s
This is my first custom built computer. I've had the same similar problem for the past year. I have continuous problems starting up and BSOD. My computer will not start up properly at times. It also seems like this problem happens if my computer is off, not in sleep mode, for longer than 24 hours. It involves several restarts. I've checked my hard drive and memory for bad sectors and not found anything. I've run both the memtest and the windows memory test several times and found no problems.There was one post I found on a seperate site that talked about ASRock m/b having problem with Ram voltage so I've manually changed the BIOS to be the voltage required for the Ram. Seemed like it fixed it temporarily but quickly started getting more BSOD.Recently updated AMD drivers and was completely unable to get into Windows. When I restored the system to before the AMD updates I was able to get into Windows.
Some of the BSOD:Bad_Pool_Header Bug_Code Memory_Management
Below are my system specs:Processor: AMD Phenom II X4 840 3.2GHz Socket AM3 95W Quad-Core Motherboard: ASRock 890GX PRO3 AM3+ AMD 890GX RAM: 4 GB - Patriot G Series �Sector 5� Edition 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 Hard Drive: 2 TB - HITACHI Deskstar 7K2000 Graphics Card: Visiontek 900299 Radeon HD 4670 Graphic Card - 750 MHz Core - 1 GB DDR3 SDRAM - PCI Express 2.0 x16 - 1600 MHz Memory Clock - 2560 x 1600 - CrossFireX DVD Drive: ASUS 24X DVD Burner Windows 7 . . . - x86 (x64) - Professional - Full retail version - Age of system (hardware)? 1 Year - What is the age of OS installation - 1 Year (reinstalled once)
So I get this BSOD when my machine starts up, right after the BIOS/memory/harddrive screen. Can someone please tell me what this means?
(Sorry I cant get a dumpfile because I cant get past this and get the OS up.)
I hope I have done everything correctly as far as following the instructions to report my bsod problems. I've noctice it usually resets and bsod after I logged into windows? if it doesn't crash in the first few minutes upon entering windows then it seems my system would be stable for hours on end.
View 3 Replies View RelatedRecently I built a new pc and I've been getting random BSOD's while on startup or soon after my desktop loads and also during shutdown sometimes.Here's my recent crash info from WhoCrashed:
[code]...
Had to install in safe-mode. After install, my graphic card was recognized and the drivers started working! 64-bit is WAY faster than 32-bit...Or is it just 7600 being faster than 7100...
View 0 Replies View RelatedI attempted install of RC1 on a new hard drive and got as far
as "Completing Installation". System reboots and after logo goes
to black screen. No error codes.
Reboot and selected Safe Mode. Win 7 says "Can't complete installation
in Safe Mode".
Reboot, press F8, select Low Resolution. Same results. Black screen.
System configure:
Asus P5Q3 Deluxe Wifi
4 gb DDR3 memory
E8500 Intel Processor
EVGA Nvidia GeForce 9800GT with 512 mb ram
On board Marvel Lan
On board Ralink Wifi
On board sound
1 - 500 gb SATA II hard drive
1 - Sata DVD
This machine runs Windows Vista Business with absolutely no problems.
This machine runs Mac OS X 10.5.6 with Absolutely no problems.
This machine runs Windows 7 Build 7000 with absolutely no problems.
I use a different hard drive for each operating system and I have
a brand new drive that I'm using to install Win 7. The drive I'm
using to install Win 7 can run Win 7 Build 7000 perfectly.
I do a clean install attempt to install RC1 and I get above results.
I reinstalled Win 7 Build 7000 on the same drive and just before boot
it says "Checking Vidoe card performance", then reboots and Win 7,
Build 700 is installed.
On clean install of Win 7, Rc 1 it appears to get to the exact same pont
(although I don't see the message about testing performance), reboots,
and gives black screen.
I have been on a couple of board and the predominant them is BSOD's
at boot for machines running Nvidia graphics. It would appear that RC1 has fouled up the Nvidia drivers.
I can't get into Low Res mode to load the approved 9800gt drivers from
EVGA so I can't complete the installation.
I'm hoping someone from Microsoft sees this and comments.
Any other thoughts or suggestions would be welcomed.
I've got one mayor problem during installation of windows 7. At last step of installation BSOD appears "completing installation".
Maybe anybody have any experience with that. I really like to test new operation system from Microsoft. I also run Windows 7 Upgrade Advisor Beta but non of errors was detected.
