I've got one mayor problem during installation of windows 7. At last step of installation BSOD appears "completing installation".
Maybe anybody have any experience with that. I really like to test new operation system from Microsoft. I also run Windows 7 Upgrade Advisor Beta but non of errors was detected.
I've been trying to install Windows 7 64bit RC1, but towards the beginning of the installation I always get a BSOD with this message:
MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED
I have an E8600 with an Abit XI38 Quad GT Speedster motherboard
Is this a known problem? Are there any work arounds?
he Bluescreens began after i installed Windows 7 64Bit Ultimate on my Computer, before that i had used Windows 7 32 bit Ultimate and i hadn't any problems. I installed the latest driver for all my components, but this didn't help. I also ran Memtest86+ with no ram errors. The Bluescreens appears often when I'm playing Starcraft 2 or Battlefield Bad Company 2.
Here are the my System Specs:
Motherboard: Gigabyte GA-870A-UD3
Processor: AMD Phenom II X4 955
Graphic Card: AMD Readon HD 6870
Memory: Geil Value Plus DDR3 PC3 1066 1333MHZ 4GB Kit
Power supply: Cougar SE 400
I have attached the minidump files, the RAMMon-SPD-Info, an the CPU-Z Memory InfosRAMMon - SPD Info.txt
I try to install Windows 7 on computer with Windows XP SP3.After step of loading files I get the BSoD with following error:STOP: 0x0000005C (0x0000010B, 0x00000003, 0x00000000, 0x00000000).When I run the Windows 7 Upgrade Advisor, it no reports about any problem with installation ability.Here is hardware configuration[CODE]
View 9 Replies View RelatedWindows 7 told me it had downloaded SP1. I set it to install and it said it would take 30 minutes so i walked away from the laptop.
I came back, and now I get BSOD very time i switch it on.for some reason i can't download the system file collection app, but i have zipped minidump.attached minidumpB is without any system config, normal windows startup with graphics adapter disabled,attached minidumpRestrict is with 'selected startup' with windows services disabled and no startups. with graphics adapter disabled.Both of them enter BSOD shortly after startup, after the windows icon has come, and when you would usually expect the wallpaper to appear.safemode works fine.windows 7 professional 32bit. laptop 2 years old. 6 months ago I had mother board fried and when i got laptop back repairer had partitioned hd into C:
System D: 1.11gb free of 1.46gb
HDDRECOVERY 544mb free of 5.63gb
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.256.48
Locale ID:2057
[code]....
i just installed win 7 rtm. i only installed avira and then tried to install catalyst, but i get bsod during installation.
i have an ati 3300 (integrated) + 3400.
any idea?
I'm trying to install Windows 7 Home Professional 64bit on my computer. Everything appears to go fine during the custom installation. After the setup gets to installing updates, the computer restarts. However, the computer inexplicably cuts power to my monitor, and after around 4 minutes the monitor will briefly flash back on to display this BSOD:This will flicker for about five seconds before the power to the monitor is cut off again, and another four minutes pass before the BSOD flickers on again. I've tried to use the "Repair Windows" option at the beginning of Setup, but that doesn't work either. It just says Windows can't find anything wrong. If I start Windows normally or on Safe Mode (with or without networking/command prompt) it says that the installation didn't finish and I need to restart the installation. I've tried to reinstall Windows 7 several times now, and all attempts end at the BSOD. It looks like that nvlddmkm.sys file is the root of the problem. This is being installed over a Linux Ubuntu OS, but I've since deleted the partitions. In the past this computer has also had Vista on it with absolutely 0 problems?
View 2 Replies View RelatedI bought a SSD Samsung 830 128gb and i tried installing windows 7 x64 on it, but everytime i try to launch the installation, i get a BSOD with STOP 0x0000007E right after the spinning Windows logo appears. I tested the HDD and the RAM and they passed all the tests. Also, i tried launching a Ubuntu live usb and i was able to use the pc without problems.I thought the issue might be related to some mobo drivers, so i installed the latest UEFI but it didn't solve the issue. Resetting CMOS didn't solved it either.[CODE]
View 4 Replies View Relatedi wanted to wipe my computer and reinstall windows 7 to have a clean slate. I downloaded windows 7 from Digital River and saved to a usb. i have a legal windows key purchased form MS. during the install i performed a hd "clean" through cmd. upon start up i got the bsod but was unable to capture the error. the SF diganostic file is attached.
i am using a dell 1420 with windows 7 64 bit.
I've recently began building my first custom-built computer, I began with an old Compaq Presario that a friend gave me, and I've pretty much gutted it and replaced all its components. The components I've replaced have included the motherboard, processor, hard drive, RAM and PSU (I'll include the specifics of my set-up below). I've been trying to install Windows 7 but have been getting the blue screen (BSOD) before the installation could complete. The BSOD said "PFN_LIST_CORRUPT" towards the top of the screen. I'm fairly sure that I've installed all the new hardware correctly. The following is the new hardware I've installed:
Processor - AMD Phenom II (3.2 GHz)
Motherboard - Ultra Durable 3 (GA-880GM-UD2H)
Hard Drive - Hitachi Deckstar 7K1000.C (1TB SATA)
RAM - Corsair 2 Gigs (2 sticks, 4 Gig total)
PSU - Logisys PS550ABK (550 Watts)
I was wondering if someone could help me out. I just recently installed a new copy of windows on my OCZ Vertex 3 90GB SSD. When the computer restarted to finish the setup, it gave me a BSOD for .5 second and then restarted my computer.I have it in my Bios that it's configured where it uses AHCI because for some reason IDE no longer identifies all of my SATA ports and what's plugged in them.I do not have a factory built PC. I have a Gaming Rig I've built myself. I'm simply at loss of ideas on how to fix this problem I'm having with this SSD. My stats are as follows:
[code]...
BSOD when Win7 is extracting the installation on setup
View 3 Replies View RelatedWe have 64 bit Windows 7. I have been installing Visual Studio family 2008, SP1, 2010 and 2010 SP1. At the end of installation, I keep getting mini dump BSODs, and once the computer has rebooted the Visual Studio Installer shows the installation has failed due to a fatal error. I attached the minidump files in a zip folder.
View 1 Replies View Relatedso for about 5 days, i have experienced random and sporadic bsod, before that it was normal and stable. i did my installation on my os on october 2011. i'm quite sure it's graphic driver but i've clean installed almost 10 times and still crashing. it crashes randomly when i opened a Internet video or open a video file, everything regarding to video. i'm already feeling hopeless here
my specs are
win 7 64 bit home premium (not oem)
gigabyte x58 ud3r
i7 920
gigabyte gtx 480
asus xonar essence stx
3x2 ocz ram 1033 mhz
my os is located on my ssd which is an intel 510 120 gb
i got 1 tb hard drive caviar green
i got 500 gb hard drive caviar green
and 250 gb seagate (really old, it's ide iirc)
i've uploaded the minidump and system performance, i hope i did right on the attachment (first time posting here).
I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
View 9 Replies View RelatedI just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc
View 9 Replies View RelatedSo i have a new SSD Corsair Force 3 240 gig and all I want to do is install Windows 7 Pro on it. This board does not support parted magic (cannot wake from sleep and there are no onboard video to wake up to) so ive resorted to clean all.I have not been able to successfully boot the OS on the SSD. I never intended on setting up raid but apparently all the literature i see is on raid. I created a USB install disk as reccomended onto a 8gig ntfs primary active did the bootsect /nt60 X: and it successfully worked copied the cd over to the flash drive and copied the rste drivers in a folder called drivers My SSD is installed on port 1 6gig sata intel (as this board doesnt have marvel apparrently) My DVD is installed on 3gig Sata port 6 I set up Raid in the bios as reccomended by others (as this is the only way to install ssd?).
Nothing UEFI is enabled There are no other drives hooked up to the computer. Just SSD, USB cordless mouse, keyboard and no network cord or WIFI i started with a clean ssd as reccomended my bios recognized the ssd on post i booted into the win 7 install (MBR not uefi) i loaded the 64 bit rste drivers from asus as reccomended by others i left the machine to install the usb then booted into windows install (for whatever reason) i pushed f8 to boot my corsair windows brings up an error on a black screen File: windows/system32/drivers/adpahci.sys driver did not load Status: oxc0000221 Info: Windows Failed to load because of a critical system driver is missing or corrupt
First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.
This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."
I am writing this right now because after the last BSOD it said "Windows can not start" and I had to restore to when it was previously working. So up until that point this is what I did.Since working with computers almost my entire life I know most BSOD are due to either bad memory, drivers, or bios. I started there and updated my nvidea drivers but it happened again. I moved to the motherboard bios.I did find a newer one on there and using ASUS tool I flashed the BIOS. Same thing still happened. Next I ran memtestx86 for 8 hours and it returned no errors.At this point I just decided to look for newest drivers for everything. One thing that happened consistently was that my wireless USB adapter from Cisco had to be unplugged and plugged back in for it to work. I went there first, reinstalled the drivers but still the same thing. I thought maybe it was my hard drive. I downloaded Seagates Utility tool and ran all the tests and they all passed fine. I ran defrag just for good measure along with windows version of the mem test and that passed as well. I still continued to get the BSOD and I have to tell you I'm irritated and also stumped.
Next I moved onto software. I have been using AVG free for years but I know virus programs do some crazy stuff and I got rid of that. Turned on windows defender. I decided that since the wireless adapter didn't work after these crashes maybe lets just go to a direct wired connection. I disconnected the cisco wireless adapter and I'm just using a direct connect right to my router.These come at random times.. nothing I do can trigger it. It can stay on for days and not crash and then there are times it can be up for 10 min and crash.Some of you might notice that in the CPU-Z screenshots I had to take the screenshot with the error underneath. Every time I chose either of the two slots it crashed the program.I have not done anything internally besides add some neon to my computer which does not connect to the board at all.I have seen IRQL blue screen once so I even went as far to go into the power settings for windows and make sure the usb and everything never went into any kind of "standby" mode.
I believe this is still under warranty and I would like to go in with good information if I need to challenge and get new hardware if that's what it is.On a side note I have not touched the memory physically. I know some suggestions were to reseed the memory and chip but In my opinion something that has been working for months that never moves off my desk and is never basically touched besides the power button shouldn't mean something just came loose after 4 months of owning it.Again that's just my opinion. I have removed AVG, Ad-Aware, Some webcam motion detector software (which was a joke) and the only thing that was really installed was Skyrim.
1 x Case CoolerMaster HAF 932 Full Tower Gaming Case - Black 1 x Case Lighting Liquid Neon Thunder Pattern Light - Red 0 x iBUYPOWER Labs - Noise Reduction None 0 x iBUYPOWER Labs - Internal Expansion None 1 x Processor Intel� Core� i7-2600K Processor (4x 3.40GHz/8MB L3 Cache) 0 x iBUYPOWER PowerDrive None 1 x Processor Cooling Asetek 550LC Liquid CPU Cooling System (Intel) - ARC Dual Silent High Perfornamce Fan Upgrade (Push-Pull Airflow) 1 x Memory 8 GB [4 GB X2] DDR3-1600 Memory Module - Corsair or Major Brand 1 x Video Card NVIDIA GeForce GTX 580 - 1.5GB - Single Card 1 x Video Card Brand === High Performance === EVGA Brand Video Card Powered by NVIDIA 1 x Free Stuff [Free Game Voucher] - Dungeon Siege 3 - Free with Purchase of NVIDIA GeForce GTX 550 or above 1 x Free Stuff [Free Game Download] - Just Cause 2 - Free with Purchase of NVIDIA Video Card 1 x Motherboard [SLI] ASUS P8Z68-V -- 3x PCI-E 2.0 x16, On-Board Bluetooth, Lucid Virtu Technology 0 x Intel Smart Response Technology None 1 x Power Supply 1000 Watt -- CoolerMaster RSA00-AMBAJ3-US 1 x Primary Hard Drive 1 TB HARD DRIVE -- 32M Cache, 7200 RPM, 6.0Gb/s - Single Drive 0 x Data Hard Drive None 1 x Optical Drive [12X Blu-Ray] LG BLU-RAY Reader, DVD�R/�RW Burner Combo Drive - Black 0 x 2nd Optical Drive None 0 x Flash Media Reader / Writer None 1 x Meter Display NZXT Sentry LX Aluminum Fan Control, Clock, and Temperature Display 0 x USB Expansion None 1 x Sound Card 3D Premium Surround Sound Onboard 1 x Network Card Onboard LAN Network (Gb or 10/100) 1 x Operating System Microsoft Windows 7 Home Premium + Office Starter 2010 (Includes basic versions of Word and Excel) - 64-Bit 1 x Keyboard Thermaltake eSPORTS CHALLENGER PRO Gaming Keyboard 1 x Mouse Thermaltake eSPORTS BLACK Professional Gaming Mouse 1 x Monitor 27" LCD 1920x1080 -- Sceptre X270W-1080P 0 x 2nd Monitor None 0 x Speaker System None 1 x Headset Thermaltake SHOCK Spin Gaming Headset - w/ Ergonomic Shaped Velvet Ear Cushions, Neodymium Magnet Speakers, In-Line Volume Controller & Independent Microphone Box 1 x Video Camera Connectland 1.3MP USB Interface WebCam 1 x Advanced Build Options iBUYPOWER Specialized Advanced Packaging System - Protect your investment during transportation! 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Achieve exceptional airflow in your chassis 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Basic Pro Wiring 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Advanced - Power Package (Individually Sleeved 24-pin ATX, 8-pin CPU, and SATA Drive Power Cabling) 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Advanced - Video Package (Individually Sleeved 8-pin and 6-pin PCI-E VGA Power Cabling) 0 x Case Engraving Service None 1 x Warranty Standard Warranty Service - Standard 3-Year Limited Warranty + Lifetime Technical Support 1 x Rush Service Rush Service Fee (not shipping fee) - No Rush Service, Estimate Ship Out in 5~10 Business Days
This started happening last night while i was playing Borderlands 2, it has happened at idle, playing just about any game in my library, during downloads and just browsing the web. I changed all of my accessible drivers, and it continued to happen, so i moved all of my personal files onto my external HDD. I re installed windows on my SSD (did not reformat) and reformatted my HDD. I re installed my drivers, re-enabled SLI and it ran fine for about an hour, just downloading WoW, and then happened again twice.
View 2 Replies View RelatedI started getting BSOD two weeks ago. As far as I can remember the first time I had a BSOD was on the day I installed Max Payne 3 (I read somewhere that the some guy had also this problem when he installed max payne). There were two occasions that I got a BSOD upon starting Max Payne 3. But lately I'm getting BSOD when doing low-load stuffs like browsing with no other apps opened. I've already done memtest with 10 passes with no errors. I'm 24 hours prime95 stable. I just don't get it! I've manually set my timings for my ram. I'm not doing any overclock. Everything is on stock settings.
View 2 Replies View RelatedI am brand new to this site so forgive me if I miss a step. I was wondering if someone who is good at debugging dump files could give me a second set of eyes on these 2 I will attach. One BSOD is DRIVER_POWER_STATE_FAILURE (ntoskrnl.exe) and the other is UNEXEPECTED_KERNAL_MODE_TRAP (ntoskrnl.exe).I have this problem across 15 identical laptops with fresh installs of Win 7 Pro 64Now my guess is this will boil down to a BIOS upgrade, but if there are driver conflicts within these dump files
View 6 Replies View RelatedI am the developer of a driver for a network adapter device that does scatter-gather DMA. Driver is not newly developed, but has had some recent changes.My client has a puzzling BSOD on one x64 machine after about 18 hours of successful operation. My x64 Win 7 machine runs fine forever. Client's box crashes in seemingly random places that indicate mem corruption.Mem test on machine was clean. Minidump is attached. WinDbg stack doesn't trace back to my code - it just shows the calls to handle the exception. Any clues y'all can see?System info from WinDbg:Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64Product:WinNt, suite: TerminalServer SingleUserTSBuilt by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506One difference between client's x64 and mine: Theirs has a valid DMA MapRegisterBase pointer from a AllocateAdapterChannel call, where mine (and my x86 systems) always have a null DMA MapRegisterBase
View 1 Replies View RelatedMy computer has been stable for years, however recently I have been getting BSOD when doing any task. Windows will sometimes load to the desktop and I am able to watch video, run windows score, check email, etc before it will BSOD. Other times, it will BSOD before getting to the windows login screen.When I use safe mode, it logs in and stays there - no BSOD.I have tried removing all extra hardware in the machine, however this has had no affect. I have also tried one stick of RAM, then another, both BSOD.
View 3 Replies View RelatedWindows 7, 64bit, volume license (though OEM on the machine is also windows 7 64bit)1 month old hardware (10 days since I added memory). 18 month old OS install (backed up and restored, and drivers updated to new hardware)(Note that the older BSODs in the zip file are from old hardware)
View 1 Replies View RelatedI was having many random bluescreens on my old home build. I upgraded my Videocard to an Nvidia GTX 550 Ti thinking that it was videocard related. After fresh install I'm still getting BSODs.
View 3 Replies View RelatedOver the past months I have encountered a BSOD roughly every month and I want to get rid of it. The BSOD happens at random (at least as far as I know), not with specific tasks.This morning I started looking for the error and found that turning verifier ON might help in identification. I did this and rebooted a couple of times, every time with the same BSOD occuring during the boot stating something about dne64x.sys
System specs:
Windows 7 Professional x64 full retail version
+/- 8 months old system, OS age is the same
I never used it heavily at the start and assumed it was just a driver and that i'd figure it out later.Well; now is later and I can't figure it out.I've done a re-install of the OS (HP recovery)This system is about a year old and is an HP Pavilion dv6 laptop with AMD Phenom II N850 Triple Core @2.2 ghz 6 gig memory 64 bit Windows 7 Home Premium.
View 1 Replies View RelatedLike I said it was fine for a good while but today the Sht hit the fan and BSOD after BSOD and only just stabled now
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7600.2.0.0.768.3
[Code].....
I just bought all my parts, and I can't seem to get the computer stable. It is constantly BSOD or freezing and crashing during games. I've attached the SF diagnostic report for one of the dumps i guess.
View 1 Replies View Related