BSOD 0xF4, Windows 7 X64 Sp1 With Power Management Set To Always On
Nov 27, 2011
A blue screen of death consistently appears to my system (Gamer PC Intel Core i7 2600K 120GB SSD 1TB 8GB GTX560Ti). It's code is the following : Stop 0x000000F4 (0x0000000000000003, 0xFFFFFA800AC5F450, xxx, xxx). I have updated mobo's bios and ssd's firmware to the latest version. In my operating system -windpws 7 x64bit sp1- i have disabled the option of shuting down hard disk drives when not in use. I have done so following advices that i found in technical forums.
Two months ago, I bought a number of components and assembled my PC, using Windows 7 Home 64-bit.A few times a week during 'cold' start-up, I get a BSOD with STOP id 0x000F4. There are also 'cold' start-ups that are successful. When I do a restart or a shutdown followed by a start-up this problem has never occured yet.What is always the case is that the BSOD hangs in the phase "initializing disk for crash dump" and the led of the harddisk is burning constantly, but nothing happens. As a consequence, I do not have a crash dump file of this problem.I did already a complete reinstall with the OS of my system, but the problem remains. The tests of the disk, memory and graphics acard are ok.
My computer was suffering from random bsods and viruses before. I atributed the bsods to viruses, but after reinstalling windows 7, I found that the bsods still happened. It seems to happen when installing drivers, or running prime95. Booting into safe mode allows me to pretty much do anything.
When crashing, it does a slow crash, where I can move the mouse around, but the startbar and any other programs dont respond. Explorer then crashes, followed shortly by a bluescreen.
When i try to look for power management bat for mouse in windows 7 i can not find it is not there (device manager /mice and another pointing devices/properties )
I built a tiny yet powerful HTPC with the new sandybridge Intel i3 CPU. is there some kind of software that will turn off the spinning HD when it is not needed and only turn on if say a tv recording is scheduled for a certain time, record the show, and then turn the hd off again. it runs windows 7 64 bit, 8 gigs of ram, 2tb hd, blu ray burner.
I would like to ask you about my problem in Window 7 professional 32bit.I just reinstall it, and update it. But when I change Processor Power Management at 5% min and 80% max in power plan at both battery and plugin, so when I am in Windows everything works fine, but when I start a game in full-screen, this power plan will change to 100% for max and min, and stay like that. I change it as Administrator. It is on laptop Toshiba A300D.But before this last reinstall everything works fine.
Just got my new system up and running. My system drive is a 256 gb SSD, and I have two internal 3TB HDDs...one data and one backup. I also have an external 2TB USB HDD that I will use as a backup (albeit, less frequently than the internal backup). Because of the SSD, the power management for turning off hard drives automatically is disabled. This is recommended for running SSDs. Therefore, both of my internal HDDs are constantly spinning.I would like to find a solution to manage the HDDs, but at the least find a solution to turn off (or just stop spinning) the internal backup drive, since it is not used very frequently. It would be nice to do this with the external HDD, but I'll probably just unplug it when not in use...easy enough.I searched for any software/utilities to do this, but couldn't find anything. Other users have the same idea, but it doesn't seem like they found a software solution either. As of right now, I've determined my options are:
1) Manually unplug/plug internal drive. Requires access to the inside of the case.
2) Get a mobile rack for my case (eg Vantec), which allows me to remove the backup drive or just power it off from the mobile rack.
3) Wire in a power switch for the drive. Cheap, easy, simple.
4) Get an external enclosure that has a power switch on it.
Out of those choices, I would probably choose 3), just because it is cheap and I'm not adding more components that have potential for noise (like the mobile rack that has a fan in it).
When I set the power management to turn off the monitor after x minutes, the monitor is off for 1 second and it turned on automatically. I am using msi ex600 laptop.
I have tried the following: * Unplugged the mouse * Exit from all application's running * Disable the network card
My bios and graphic card are updated. The hibernate option is working fine. Is there a way to find what turns on the monitor?
I can only wake my PC from sleep using the keyboard. How do I get it to do it with the mouse? My Logitech mouse does not have a power management tab under Properties.
Getting several BSoD a day and it driving me mad! I have replaced the RAM but still giving me the "fault in non paged area" error and i have reinstalled windows and the error still there
i have a pile of memdumps if someone can help me
BSoD error i have had "IRQ", "MEMORYMAGEMENT" and "NON PAGE FAULT",
with me replacing the ram and reinstalling windows, where else could cause this issue?
After previously solving the BSOD error "a clock interrupt was not received on a secondary processor within the allocated time interval" by replacing the CPU, I have run into another BSOD. This time the error is "memory management". After doing some research I'm thinking this error is about some program conflicts or something similar (I'm hoping that is the case!), instead of a hardware problem. I have attached the last 3 minidumps I have.
I started to get random BSODs, usually after a few hours after turning on my PC. The only major change I made was a firmware upgrade to my Asus P8Z68-V Pro MB to the latest iteration: 3203 released Feb 21/12. Recently my website got hacked via ftp password breach but I ran a full system AV & Malware scan and results were clean.
Windows 7 64-bit (student upgrade version), approx 8 months old. System: Intel i5 2500k cpu @ stock, 8800GT, 16GB G.Skill PC3-12800 ddr3 ram, Windows booting off a WD 1.5gb Black HDD
[code] I bought this computer at Microcenter, they manufacture them and sell them under the brand PowerSpec. Mine is the B633 Since I bought it, it had had multiple errors, as shown in the attached .zip. I want to know what I need to do to fix these errors.I have ran memtest and let it do 10 passes with 0 errors. I am running driver verifier right now and have had 2 BSOD that I have never seen before, one was Special Pool...? Most of the time it is Memory Management BSOD, however.
my computer has been receiving random BSODs throughout the day, especially when I am browsing the web. The message is usually "memory management." This computer is around 3 months old. The first 1 1/2 month, it did not experience this problem. However, from July and onwards, my computer would get BSOD; it would occur at least once a day.
According to BlueScreenView, the driver that is causing BSOD is "ntoskrnl.exe."
i recently made a thread in regards to my blue screens and i will now upload more of the minidumps. they generally occur when i am on chrome and watching a Internet video. i just received one then in regards to memory_management and no reason was shown.
So I've been having random BSOD's for 10 day's now - They appear at complete random and I can't tell why, Each time they display 'Memory Management' - I can normally diagnose them and narrow it down, However I cannot seem to do so. Can an expert have a look at the dumps and see if they can work it out?
Recently I have been getting random BSOD some say Management, other say Non Default, Bad_Pool_Header, maybe some others but the BSOD is to fast for me to read exactly what it says. I been doing my research on how exactly I can even first look at this mini dumps found a program call (BlueScreenView) When look around i can see all id the dumps there but am seeing the the main culprit is a ntoskrnl.exe. Now I am guessing this Because it was shown alot. People have said to run memory checks, your ram sticks are going bad, restore your computer, but honestly I an clueless.
I would like to know 1) What are the step to find the problem 2) How to fix it 3) How to prevent it
However after about a week of usage with no errors all of a sudden I have started getting the odd BSOD, and today I have had about 20, even in safe mode.
Suddenly my computer could just black out, looks like it is turning itself off, but not completely. The fans is still running, but can't use the computer and the screen is black.And yesterday I got a BSOD also. Don't know if this Memory Management issue has something to do with my earlier blackouts, but I hope so. So that there is only 1 thing to fix ;-)Yesterday I ran Memtest86+ for 10 passes and 22 hours. And I got zero errors. See picture.
I just bought my new laptop 1 month ago, but BSOD occurred for many times.Window 7 Home Premium
System
Manufacturer Hewlett-Packard Model HP G42 Notebook PC Total amount of system memory 4.00 GB RAM System type 64-bit operating system Number of processor cores 2
Storage
Total size of hard disk(s) 596 GB
Graphics
Display adapter type ATI Mobility Radeon HD 6370 Total available graphics memory 2746 MB Dedicated graphics memory 1024 MB Dedicated system memory 0 MB
Acer Aspire 4740G. 2 years old. Last 1-2 weeks constant BSOD as per title, and random freezing up, forcing restart. On restart, random issues pop-up e.g. "Windows explorer is not working", "Login services not working (causes me to be logged into a new profile, all settings, icons, wallpaper gone)". The system has run the Memory Diagnostics test. Extracting from the Event Viewer, the results are as follows:
i'm having issues with my Windows 7 Ultimate 64 bit PC. Every so often it will just BSOD on me. I've had a look at the errors and it mentions MEMORY_MANAGEMENT and ntoskrnl.exe, but i don't really know what i'm doing so i figured i'd get some REAL help. I've recently installed new graphic drivers, hoping that might help but it just crashed on me again.Windows was pre installed on the machine and the machine itself is only a year old.
I have been experiencing random reboots which very often fail and occasional BSOD crashes, the last one refers to memory management. I am running Panda cloud antivirus and malwarebytes.Original OS was preinstalled retail version win xp proff. Current OS full retail version win 7 64bit home premium Hardware new Dec 2006. Dual boot 2 x sata hard drives?
I had 2 BSOD in recent weeks with the same error message on ntosknl.exe. I,m using Win 7 64bit. The dump file is attached. I,m using AMD X4 955 with 8G Ram, 1G HDD
The operating system is 64 bit OEM. The computer is about nine months old (I got it at the end of June). I have not re-installed the operating system nor made any significant changes. Attached is the output from the "BSOD dump and system file collection" executable. I added the system health report to the same folder as the rest of the stuff, under the name "performanceanalysis.html". Let me know if you need any information that is absent from those files.
The BSOD usually occurs when the computer hibernates, restarts, or turns off. The computer will take an exceptionally long amount of time on the "turning off" screen, then the fan will start running loudly and the BSOD appears.
I've been using Windows 7 since it went public, within the last 18 hours I got about 15 BS'sOD. I think the problem had something to do with the fact that I plugged my laptop into a power strip BEFORE turning the power strip on...idk. But whenever I plug in my laptop it takes about 30 seconds for a BSOD to show. I copied a couple down, here they are:
3. 0x0000008E (0xC0000005, 0x8CBB63D1, 0x8BA84A94, 0x00000000) KI1.sys - Address 8CBB63D1 base at 8Ca0900 Data Stamp 4911af5e
4. STOP: 0x0000008E ( 0xC0000005, 0x8BDB73D1, 0x8BB8FA94, 0x00000000 ) Kl1.sys - Address 8BDB73D1 base at 8BC0A000, Data Stamp 4911af5e
What I've tried:
Unplugging the power cord. Result: nothing happens but the battery drains so I eventually had to plug back in. Removing the battery. Result: I didn't get a BSOD for about 25 minutes. Using a different power source with battery. Result: Same as with original power source. Using a different power cord. Result: BSOD after 30-45 minutes. Plugging in computer when closed. Result: this works but I can't use the computer.... Currently I'm using 1, 4, and 5.
FYI: I posted a similar message on the Microsoft forum but all they told me was that it was a driver problem...I'd like to know is there anything I can do? and what those bug codes mean.
