My audio jack or headphones on Dell Vostro 1015 do not produce sound. The computer recognizes and displays that a headphone has been inserted. The in-built speakers work well. I have uninstalled and reinstalled the high definition audio drivers. I have tried to troubleshoot it with the Windows 7 Professional 32 bit troubleshooter but it does not work. It was working well until a few days ago. I have done a sfc/scannow on it.
how I would do a 5.1 surround sound set up using only the microphone jack and headphone jack on my laptop - without utilizing an external sound card.
What I am interested in is: would it be possible to reconfigure/reassign the role of each audio port and how would I do that? How would I physically connect a front left/right, rear left/right and sub-woofer cable, to two ports available on my basic laptop? do i have to strip some wires and "piggy-back" the wires. Is what I am asking for possible? I know, the easy thing to do is to go and buy an external sound card like the Zalman-RSSC V2 5.1ch USB sound card, but I already have a desktop with an adequate sound-card for the purposes stated above and I want to try something challenging
I built a barebone kit and installed Windows 7 Ultimate 64bit, I installed all the drivers correctly but for some reason Windows keeps detecting the front audio jack as if someone is repeatedly pushing in and out headphones(no pun intended). Audio doesn't work at all through front and back audio jacks, only HDMI. I only get static from the audio jacks.
A few days ago, one half of the jack of my external speakers got stuck in the female jack of my PC laptop.I am using Realtek HD audio, and I wanted to ask whether it is possible for me to somehow disable the jack and have my audio played through my normal inbuilt laptop speakers, seeing as I will be needing audio from my computer as soon as possible.
My headfone jack (incorporated on the motherboard) is broken, and I bought a USB adaptor to conect my head fones, but it has a low quality.I came to know that it's possible to switch the microfone jack to use it has a audio jack, but I cant figure or research how. I use windows home premium 64bits.
A few days ago, one half of the jack of my external speakers got stuck in the female jack of my PC laptop. I am using Realtek HD audio, and I wanted to ask whether it is possible for me to somehow disable the jack and have my audio played through my normal inbuilt laptop speakers, seeing as I will be needing audio from my computer as soon as possible. Here is a snapshot of my audio devices - and as you can see the speakers and headphones are under one device so I can't switch between the two.
I somehow experience a problem that my heaphones (small ones), which work properly on my mobile, produce sound when connected to laptop only from the right headphone. The left one isn't reacting to tests as well.
the internal speakers of dell inspiron 1420 does not produce any sound but but can hear sound when i plug in my ear piece. iam using win7 ultimate, 64 bit
so i have a desktop running two monitors one via hdmi one via dvi i have my main desktop on one monitor to do internet Internet etc. and run stuff like movies games and stuff on the other. can i run two sets of audio one from the audio jack on my pc one from the hdmi to the screen? if not is there any other way to accomplish this?
if you need more info for example my pc setup just ask.
So I just got an update for Windows and after the update my headphones stop working. Sound still works with the integrated speakers but whenever I plug in my headphones they don't work. I've tried making the headphones the default device and that didn't work. I have BeatsAudio on my computer so I would like to know which driver update I need to try and fix the issue.
Last month I built my own computer. I am having a problem with my Front I/O audio jacks.- Headset is Beats by Dr. Dre Solo HD- I have went into BIOS and enabled my Front I/O- My front I/O is properly connected to my Motherboard- My driver is Realtek HD R267 (Newest driver)I have looked up this problem for quite some time but can't find a way to fix it. People have said to go into Realtek Audio HD Manager and click on the folder next to analog and untick disable front detection. I don't have this folder
I just downloaded new drivers for my Realtek Audio and now every 20 minutes or so I'm getting a message pop up saying "You just unplugged a device from the audio jack." and for about 2 seconds audio won't work, then it will work fine. This has only happened after I downloaded the new drivers. I've checked the physical speaker connection and it's properly in there.I don't know how to get the exact name for my sound card so if that's needed please tell me how.I suspect that it might be because of some other out of date driver, if it is so I would be very grateful if you could give me links to where I could download drivers because besides this update and graphics cards updates I have no idea how to update any other drivers.
My Moterboard is asus m2n68-am plus , problem is that in windows 7 my front audio jack not working.ihave tried many latest realtech audio drivers but nothing , the problem is still continue.
I've been at this for about six hours and I am stumped. I have no sound coming from any jack on my computer via the onboard soundcard or the front jack. Ive uninstalled and reinstalled the drivers from my mobo's disk and went through the realtek website and tried every driver I could find there. The system recognizes the speakers and shows them as putting out sound, but I get nothing. I've even ran through the BIOS to make sure nothing was amiss there.
I have a Touchmate PC with two sets of audio ports (3.55mm jacks or 1/8" ) the front ones are not working (because they are disconnected) so i wish to use the rear ones, however, windows is set up so that the audio output (into my headphones) send information through all ports but the front mic, which is fine because i use the rear output port. My problem is that the microphone settings will only allow the microphone to be read through the front microphone port. Is there any way i can change these settings so that the microphone reads through the rear microphone port.
I rercently came with the following problem without any reason:I have a realtek audio chipset with my mother board.Since some time, the HD audio drivers keeps on detecting/undetecting a device plugged in my front jack (resulting is sound cutoff, which is more than annoying). But, there is nothing plugged.If I plug something then, the detection works right.I'm wondering if it is a software problem, or if there is something wrong with my motherboard or my front jack connector (some kind of shortcut or whatever).
I have realtek ALC898, part of gigabyte Z77 UD5h mobo, windows 7 ultimate 64bit. Rear jack speakers always work, sound always works. But after sleep, the front panel audio jack does not work, ie headphones silent.
Workaround 1) go to device manager, disable realtek high definition audio, then enable it, then front panel audio jack works properly. workaround 2) restart the computer and it works again.
I tried disabling sleep and using hibernate, since I read somewhere that hibernate is like a restart, but apparently it is not. Using hibernate, once it resumes from hibernate, front jack still doesnt work just like using sleep mode.
It sounds like resuming from sleep mode or hibernate mode, that windows 7 is failing to reinitialize some of the realtek audio drivers, at least those associated with front panel audio jack for headphones. So have to restart or disable/enable realtek high def audio in device manager. I have most recent realtek drivers, tried both from realtek, and most recent from Gigabyte, both have same issue. My windows 7 is fully up to date.
Am I right in this is just failure of 7 to reinitialize some drivers?
When my PC wouldn't boot a few months back I thought I was safe with system restor. Wrong , there were no points there to restore to. A few week ago when I was having problems there were no restore points either and I discovered the upgrade install method, and got going again. Having recently been helped with PC crashing several times a day (by uninstalling catalyst Control Centre), I seem to be up and running normally again, but there are no rstore points. I asked about this serveal months back and I seem to remember that there is no automatic creation of restore points (ideally twice a week would be good). I followed instructions to set this up, but still they weren';t there when I needed them.
I have three printers.1. Samsung ML-2010 (B&W)2. Epson Stylus Photo PX650. HP Color Laserjet 1600.When trying to Print a Spreadsheet from ExcelThe Samsung prints without any problem.The Epson takes Four and a Half Minutes to produce a print.The HP tells me "Current Printer is unavailable, Select another Printer"Each of the Printers will print a Windows Printer Test Page from my PC.
I recently done a new build, not with the same specs I have on here; i5 2500k p8z77-m pro sapphire radeon 6870 I cannot get any sound through the front+back headphone jacks, realtek doesnt detect any audio devices, however i can mess around with the settings to get windows to say i have speakers+mic and 2nd audio devices plugged regardless if anything is plugged in or not.
every start i have to install sound driver if i want to hear sound.After installation of sound driver i can hear sound with no problem. But when i shut down the computer and start again after some time sound goes away.
My sound is working but "line in" and stuff wont show up in sound. So I have sound but no mic. The driver says its a Microsoft driver. The sigmatel audio drivers I tried using were all distorted when I installed them as in the sound would work and everything would show up in Sound but was messed up. Its obviously the wrong driver so I uninstalled it and put the "Microsoft" one back.
Gateway 840gm (slightly upgraded) 500w power Nvidia 9800gt gfx 3gb ddr2 3ghz pentium d (dual core) 125gb hdd Windows 7 ultimate 32bit
When a sound plays on the computer, it makes a funny clicking noise at the end of it almost like it has got stuck- The problem can be temporary solved by changing the audio settings but when you log off and back on the problem still persists.
I just reinstalled windows and installed the latest realtek from here Realtek
I checked my playback devices, and it shows a green bar going up and down indicating that the sound should be working, but i can't here jack.
If i switch my sound in playback devices to my 42 inch flat screen, sound comes threw fine... i HIGHLY doubt my speakers are broken as they were working before i reinstalled windows.
In WMP, SRS trubass and proper EQ sound much better in my speakers, and I also want to apply this sort of enhancement (Or as close as possible) to sounds coming from my browser, for example.Is there a program or system in place I could use to do this?