Setting Up 5.1 Surround Sound Using Only Red And Green Audio Jack

Jan 23, 2012

how I would do a 5.1 surround sound set up using only the microphone jack and headphone jack on my laptop - without utilizing an external sound card.

What I am interested in is: would it be possible to reconfigure/reassign the role of each audio port and how would I do that? How would I physically connect a front left/right, rear left/right and sub-woofer cable, to two ports available on my basic laptop? do i have to strip some wires and "piggy-back" the wires. Is what I am asking for possible? I know, the easy thing to do is to go and buy an external sound card like the Zalman-RSSC V2 5.1ch USB sound card, but I already have a desktop with an adequate sound-card for the purposes stated above and I want to try something challenging

View 2 Replies


ADVERTISEMENT

Surround Sound Works Via HDMI, But Not WMV, No Audio

Oct 20, 2009

I've got a bit of a problem with my audio with my new installation of Windows 7. Previously I had Vista installed, and had no problems with my Realtek HD audio. Installed Windows 7 everything looked good, then realized my Sony A/V receiver model SA-WCT100 was not outputting my movie collection in surround 5.1 like it use to using Vista.

I figured, that�s cool, probably need to install ac3filter_1_51a, I had to in Vista, and it worked a treat when I enabled SPDIF pass through. I guess I should mention I�m using HDMI all the way through, from my PC to the receiver, from the receiver to the LCD. Well, that didn't fix it, everything still plays in stereo. After scratching my head and clicking here and there, I finally found a little tab in the sound settings of my Realtek HDMI setting called 'Custom'.

I selected it, it said to enable AC3, DTS, etc click this box will require a restart. I said awesome, sounds like just what I need. I clicked, and rebooted. I went into WMC, and setup my audio wizard again, and selected 5.1, and tested, and this time it reported 5.1 on my Sony receiver as before it only showed 2 channels (Stereo). I played some of my DVD rips, and bam my DVD rips were playing surround sound again.

I was like that was easy enough. I went to test my Blu-Ray rips that I had converted to WMV HD using TMPGEnc Xpress 4.0, and the video started to play, and I was like, wheres the damn sound. I noticed on the receiver, it didn't report anything for sound. I had no idea what was going on. My surround sound was finally working for everything, but my WMV HD videos had no sound output. I mean I can't even get stereo or anything out of them now. At least before the WMV played in stereo, now I can't hear anything.

Please someone tell me what could be the problem, I don't know what else to try. I don't want to have to revert back to stereo, and disable the magic box under custom in my sound setting.

I have downloaded the latest Realtek drivers form Realtek, version 2.35 for the ATI HDMI audio, and the Digital Audio. I also have the latest drivers for my integrated Radeon 3200 graphics card. I read that sometimes a high resolution can affect the audio, so I lowered my resolution from 1080p, and that didn't help, which I figured it wouldn't.

View 5 Replies View Related

Audio Jack Do Not Produce Sound

Sep 20, 2012

My audio jack or headphones on Dell Vostro 1015 do not produce sound. The computer recognizes and displays that a headphone has been inserted. The in-built speakers work well. I have uninstalled and reinstalled the high definition audio drivers. I have tried to troubleshoot it with the Windows 7 Professional 32 bit troubleshooter but it does not work. It was working well until a few days ago. I have done a sfc/scannow on it.

View 9 Replies View Related

HDMI Sound Works But Audio Jack Not Working

Jan 17, 2013

I built a barebone kit and installed Windows 7 Ultimate 64bit, I installed all the drivers correctly but for some reason Windows keeps detecting the front audio jack as if someone is repeatedly pushing in and out headphones(no pun intended). Audio doesn't work at all through front and back audio jacks, only HDMI. I only get static from the audio jacks.

View 2 Replies View Related

Audio Jack Stuck In PC Input Jack?

Nov 4, 2012

A few days ago, one half of the jack of my external speakers got stuck in the female jack of my PC laptop.I am using Realtek HD audio, and I wanted to ask whether it is possible for me to somehow disable the jack and have my audio played through my normal inbuilt laptop speakers, seeing as I will be needing audio from my computer as soon as possible.

View 1 Replies View Related

How To Switch Micro Jack To A Audio Jack

Oct 23, 2012

My headfone jack (incorporated on the motherboard) is broken, and I bought a USB adaptor to conect my head fones, but it has a low quality.I came to know that it's possible to switch the microfone jack to use it has a audio jack, but I cant figure or research how. I use windows home premium 64bits.

View 6 Replies View Related

Audio Jack Stuck In PC Input Jack

Nov 4, 2012

A few days ago, one half of the jack of my external speakers got stuck in the female jack of my PC laptop. I am using Realtek HD audio, and I wanted to ask whether it is possible for me to somehow disable the jack and have my audio played through my normal inbuilt laptop speakers, seeing as I will be needing audio from my computer as soon as possible. Here is a snapshot of my audio devices - and as you can see the speakers and headphones are under one device so I can't switch between the two.

View 1 Replies View Related

Transfer Audio Through Hdmi And Audio Jack?

Jan 24, 2013

so i have a desktop running two monitors one via hdmi one via dvi i have my main desktop on one monitor to do internet Internet etc. and run stuff like movies games and stuff on the other. can i run two sets of audio one from the audio jack on my pc one from the hdmi to the screen? if not is there any other way to accomplish this?

if you need more info for example my pc setup just ask.

View 3 Replies View Related

How To Get 5.1 Surround Sound Through TV's USB

Aug 16, 2012

i recently brought sony32EX650 LED TV with Sony DVD player with home theater.and i want to watch HD movies on this TV with surround sound but we know dvd player don't play the Hd quality videos.But on TV's usb we can play those Hd videos and they have 5.1 surround sound also.and i can't get 5.1 through TV's USB. is there any possible to get 5.1 through TV's usb via home theater.

View 1 Replies View Related

How To Fix Surround Sound

Mar 25, 2012

ixin my surround sound

View 2 Replies View Related

Windows 7 SP1 And 5.1 Surround Sound

Mar 18, 2011

I installed SP1 for windows 7 this week and since then my sound is not working propely. Its only playing my front 2 speakers (Not rear 2 or centre on 5.1s) I have installed new drivers (Realtek) but nothing.If I run a sound test all speakers ding (on realtek or windows audio settings) Great but any application just pipes sound out to front 2 speakers. Is there another setting within windows ive missed?

View 1 Replies View Related

No 5.1 Surround Sound In Windows 7

Jul 14, 2011

I have a system running Windows 7 64 bit and a set of Logitech z5500 speakers. Originally I was using a Creative X-Fi Titanium Fata1ity board. In XP I was able to get surround sound. When I switched to Win 7, the surround sound stopped working. Sometimes it would test as working in the sound app in the control panel and sometimes it wouldn't. Sometimes I could fix it by reinstalling the board's driver, but it always stopped again over time. Generally I had to make do with a front R/L/C system and the subwoofer.After goggling the issue extensively, I finally decided that the problem was some unidentified conflict between the Creative card and Win 7. So I researched sound cards and finally settled on an Asus Xonar ST with an H6 card. I hooked the system up via a setup that looked like the chart here: [URL]. However, now all the sound comes out of the front R/L/C--and no subwoofer!

View 3 Replies View Related

Cpu Audio Jack Fixing?

Jun 24, 2012

how can i fix my audio jack in motherboard

View 1 Replies View Related

5.1 Surround Sound / Not Playing Back

Jul 9, 2011

I have set up my surround sound 5.1 speakers recently.I went into the Realtek HD Audio Manager, and set it to use "5.1 surround sound",but as I try to play music, sound only comes through the front speakers.I have tried looking through all sorts of settings, and cant find what I could have set wrong.I have tested the rear speakers in the sound manager, and it plays sound through the rear speakers in the tests, but Itunes, and internet explorer do not play sound through the rear speakers.If I change the defult device in the second screenshot to use Realtek Digital output, no sound comes out at all.

View 4 Replies View Related

No Surround Sound With S/PDIF Through MB Or Soundcard?

Oct 13, 2012

I recently purchased a 5.1 sound system, which I have connected to the S/PDIF output on my MB (Gigabyte Guerrilla) however my system seems insistent on sticking to a 2.1 output. A quick search shows that I should go into speaker setup, find the correct playback device and reconfigure it; however when I go to this page the option to configure is greyed out so I cant use it!I have gone through the properties page and when I do the supported format tests sound is done through all connected speakers so I know they can physically receive a signal.Does anyone have ideas as to why the configure option is greyed out? I am on an administrator account and UAC is turned off.

View 4 Replies View Related

7.1 Surround Sound Gaming Headset?

Oct 7, 2011

my laptop doesn't have the sound card to provide 7.1 surround sound, it does however have Dolby Surround Sound, so I was thinking if I purchased a 7.1 surround sound headset, how can I configure each speakers on it? Since currently the only audio channel I have is Stereo.The headset is plugged in by USB, so it must act like a sound card on its own, if I plug in the USB headset, will it provide me another audio channel for 7.1?

View 1 Replies View Related

How To Keep Surround Sound Headphones Configured To 7.1 Not 5.1

Aug 16, 2012

I just got some surround sound headphones. When I restart my computer after having set my sound configuration for the headphones to 7.1 (supported by these headphones) the sound configuration will be at 5.1. I don't know what is causing it to keep going to 5.1.When the set up is at 7.1 the two rear speakers are enabled. This might seem small but I play battlefield 3 and being able to better hear enemies who are behind me willter and this is one of the reasons I got the headphones so I definitely prefer these two speakers to work.

View 5 Replies View Related

Surround 5.1, Only Sub-woofer Produces Sound?

Aug 17, 2012

Well i have a stereo 5.1 system by Creative, version SBS 580.When i first got the computer everything was fine, then my brother bought those headphones, so we didnt use the speakers at all.so after about 1-2 years without use i plugged them in and tried to use them.The problem occured was that only the subwoofer worked, none of the speaked did,and the subwoofer only worked at the "Realtek HD Audio Manager" program.I tried reading forums of creative, tried to connect the system to the computer in many ways, all of the ways give me the same result, only the subwoofer produces sound.the way creative's guide say to connect the speakers is like that: ImageShack� - Online Photo and Video Hosting The program that im using is "Realtek HD Audio Manager" : ImageShack� - Online Photo and Video Hosting so when i play this play button, only the subwoofer makes the sound, non of the speakers. All of them are connected to the subwoofer correctly, they are turned on.

View 1 Replies View Related

[AUDIO] HP Dv6 Headphone Jack Not Working

May 31, 2012

So I just got an update for Windows and after the update my headphones stop working. Sound still works with the integrated speakers but whenever I plug in my headphones they don't work. I've tried making the headphones the default device and that didn't work. I have BeatsAudio on my computer so I would like to know which driver update I need to try and fix the issue.

View 1 Replies View Related

Front I/O Audio Jack Not Working?

Jan 18, 2012

Last month I built my own computer. I am having a problem with my Front I/O audio jacks.- Headset is Beats by Dr. Dre Solo HD- I have went into BIOS and enabled my Front I/O- My front I/O is properly connected to my Motherboard- My driver is Realtek HD R267 (Newest driver)I have looked up this problem for quite some time but can't find a way to fix it. People have said to go into Realtek Audio HD Manager and click on the folder next to analog and untick disable front detection. I don't have this folder

View 6 Replies View Related

Unplugged A Device From Audio Jack

Nov 6, 2011

I just downloaded new drivers for my Realtek Audio and now every 20 minutes or so I'm getting a message pop up saying "You just unplugged a device from the audio jack." and for about 2 seconds audio won't work, then it will work fine. This has only happened after I downloaded the new drivers. I've checked the physical speaker connection and it's properly in there.I don't know how to get the exact name for my sound card so if that's needed please tell me how.I suspect that it might be because of some other out of date driver, if it is so I would be very grateful if you could give me links to where I could download drivers because besides this update and graphics cards updates I have no idea how to update any other drivers.

View 5 Replies View Related

Front Audio Jack Not Working

Dec 6, 2012

my front audio jack not working my audio jack model iball cabinet i7272

View 1 Replies View Related

5.1 Surround Speakers Playing Sound Incorrectly/not At All?

Oct 16, 2011

My computer was blue screening. I had a warranty RMA through my manufacturer and I just got it back, fixed. However since then, my Logitech X-530 5.1 surround speakers have been messed up. Initially I thought the front two were not working, but when I was testing I found the Left Rear works and the Right Rear sound comes through the Front Left speaker. The Subwoofer is fine, but the Right Front and Rear have no sound. To be more clear, when my realtek audio manager tests the front two speakers, there is zero sound. When it checks the LR it comes through the LR fine, but the RR comes through the LF speaker. I've unplugged, checked wires, made sure everything was plugged in correctly, and I reinstalled my realtek HD audio driver also.s.

View 1 Replies View Related

How To Get 5.1 Surround Sound From Laptop Through TV To Sony BdvE390

Jan 1, 2013

I am having trouble getting my audio from my laptop to play as 5.1 surround. I have my Laptop with a HDMI running to my Vizio E260mv TV and then a audio optical cable running into my Sony BDVE390 surround sound system. It could just be a configuration problem with my PC's audio settings or something more I am not certain,

View 2 Replies View Related

Creative X-fi Xtreme Gamer No Surround Sound

Jan 21, 2012

I have had this sound card now for about 3 years. Everything worked fine with XP sp2 along with my old Logitech Z-560(THx) 4.1 speaker setup. Ever since I upgraded to Win7x64 it seems to not like this new card for whatever reason. I uninstalled the Xp drivers, and I disabled onboard sound in the bios. I even tried the latest beta driver on the Creative website. Nothing seems to work for my issue. The issue is that the rear speakers work, but they act as another somewhat muted front, and not a rear speaker. In the Creative Console Launcher, the rear speakers don't make any sound at all when testing channels.Also, the card stutters a bit during gameplay. More noticeably so during older games like CS Source. It will pause the graphics for 1/2 a second during a sound about once every 4-5 minutes (sometimes more often).I have been using 2.1, or stereo just fine, but I would like to use those rear speakers! Of note, the Logitech Z-560 speakers only have a green and black connection both are plugged in.

System:
Win7 pro x64 sp1
Asus M3A76-CM mobo
AMD Phenom II 940 x4 @ 3.6ghz
6Gb Kingston HyperX DDR2
Nvidia GTX 470 Superclocked
Creative X-FI xtreme gamer
Thermaltake Toughower XT 775w

View 2 Replies View Related

5.1 Surround Sound Drivers For Windows 7 Download?

Jun 22, 2012

My win.7 is not work 5.1 Channel Sound Ply.

View 2 Replies View Related

Front Audio Jack Not Working In Windows 7?

Jul 1, 2011

My Moterboard is asus m2n68-am plus , problem is that in windows 7 my front audio jack not working.ihave tried many latest realtech audio drivers but nothing , the problem is still continue.

View 2 Replies View Related

Front Panel Audio And Mic Jack Are Not Working?

Dec 1, 2012

how do connect mother board sound cable

View 1 Replies View Related

No Sound Coming From Jack

Apr 12, 2012

I've been at this for about six hours and I am stumped. I have no sound coming from any jack on my computer via the onboard soundcard or the front jack. Ive uninstalled and reinstalled the drivers from my mobo's disk and went through the realtek website and tried every driver I could find there. The system recognizes the speakers and shows them as putting out sound, but I get nothing. I've even ran through the BIOS to make sure nothing was amiss there.

View 31 Replies View Related

Windows 7 Wont Recognize Surround Sound Speakers?

Feb 20, 2012

windows 7 won't recognize my surround sound speakers and when i try playing music the volume of my 2 rear speakers keeps changing (they get louder and softer uncontrollably.) according to windows all my drivers are up to date. when i go to the playback tab in the sound settings menu, my speakers aren't displayed in the list and when i try to configure the speakers it wont let me choose surround speakers. i tried changing the settings in realtek hd audio manager but still i couldn't select surround speakers. the problem is not my speakers because the surround sound works perfectly with my Xbox 360 and my PS3.my laptop is an acer aspire 5736z running windows 7 home premium 32 bitmy speakers are Logitech z506 5.1 surround sound speakers

View 1 Replies View Related

Windows 7 How To Change Audio Jack Port Location

Sep 2, 2011

I have a Touchmate PC with two sets of audio ports (3.55mm jacks or 1/8" ) the front ones are not working (because they are disconnected) so i wish to use the rear ones, however, windows is set up so that the audio output (into my headphones) send information through all ports but the front mic, which is fine because i use the rear output port. My problem is that the microphone settings will only allow the microphone to be read through the front microphone port. Is there any way i can change these settings so that the microphone reads through the rear microphone port.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved