I have an ultra book with 128GB.I also have a 1TB NAS drive on my network. I want to go through and archive old personal data files and move the archives to the NAS drive. I don't want to totally get rid of it.I know I can just move over want I don't want to keep on my computer. But I'm hoping I can find some method of managing the archives now and in the future.
View 3 Replies
my system registry to locate and stomp out old and irrelevant references.As expected, I am going to be told at least once to 'be careful' doing this.[Perhaps I should keep count of the actual 'be careful's I get for amusement?]Not to worry, once I was into if far and long enough to realized (according tomy actual use of the system) how very very many useless references are kept in the registry, the sheer number of it all convinced me a system restore might save me entire days of nit-picking... so I stopped my search & eliminate strategy.I do not have my IE to keep history of sites viewed or downloads performed.I want to have Windows 7 do the same except with applications executed and probably other things in addition to downloads that I really do not wish it to keep track or.
I do not have any password saving or automatic suggestions (typing in fields)enabled and a great many other things that I believe relay on some manner of archiving. I use installation monitoring so that I can 99.999% uninstall without need of extensive OS archiving. I'm fairly confident that I have things set up so that I can begin keeping my registry clutter free (and I am very prepared for keeping system backups in case I am wrong). Now- how do I stop Windows 7 keeping so many freaking historical and impractical entries in the registry?
For some reason, when I archive my personal folder, the size of the outlook.pst is not decreasing? I'm following the same steps, e.g. I close outlook after archiving, then re-open and compact the personal folder. From WITHIN Outlook, the personal folder size shows that it's been reduced significantly. But from my file manager view, the file size continues to grow, and is now approaching 2G. While I know this Outlook 2003 2G max limitation was "fixed" in Outlook 2007, I still don't understand why the size on disk doesn't reflect the fact that I've archived?
I'm running Outook 2007 under Windows 7 (64 bit)
I'm assuming this may be a problem because Outlook occasionally hoses up for no apparent reason?
I checked my page file size versus my RAM and since they were both ~ 6G, I followed the advice received elsewhere in this forum to increase the page file size. I have now set it at 9G to 12G.
I have several old email data files (PST) that I no longer use and therefore have not included them in my Outlook 2010 profile. I was wondering is there anyway I can see what is in them without importing them into Outlook as I am after 1 specific email with a video attachment on it.
View 1 Replies View RelatedAll the files and the data on my usb thumb drive, but it is still their, I can even copy it to a new file. All the data says it is there,but it is still invisible. I have run Norton 360, and Mal-ware bytes, no effect. I am running sys 7 pro 64 bit on a Toshiba satellite
View 2 Replies View RelatedI regularly activate Windows Mail on Win-7 for myself and my customers who are used to Outlook Express 6 and like it. I know how to migrate the address book from OE6 to Windows Mail but I can't seem to find the actual EMail folders in Win-7, Windows Mail. In OE6 they are *.dbx files and are easy to find, copy and migrate to the new PC. Now I have a friend who is running Vista with Windows Mail but he hates Vista and wants me to install Windows 7 for him. I have no problem activating Windows Mail in Win-7, but he'll want his old email folders and I don't know how and where to find them?
View 1 Replies View RelatedOld PC currently running on Windows Vista Home Premium 32bit and new PC on Windows 7 Home Premium 64bit.
So far I've did a full backup via Acronis True Image 2012 (read online about it) and I'm lost on what should I do next? Do bear in mind that I'm a "noobie" in tech stuff
I've had this laptop for a few months now and I got another hard drive called Data which is empty, my other hard drive called OS is where everything goes and I wondered if I can move games and other files to my Data hard drive without corrupting them. And if possible can I move a file called Program Files to my Data hard drive without causing any problems. My pc takes a long time to restart which I guess my OS decides. My OS got is 80gb of 238GB and my Data is 332gb big, with no files in it.
View 9 Replies View RelatedUnable to find locale data files. Please reinstall.what is this mean?
View 1 Replies View Relatedmy computer has a message that says install locale data files an how do i do this?
View 2 Replies View RelatedIm trying to convert the hex data of some files and folders into notepad format but i dont know how to do it in the program i have Winhex. I have also learnt that this is called parsing... I have two images here of what i am trying to achieve.
View 5 Replies View Relatedif my operating system like xp or win 7 is corrupted/damaged which it can't be started to get/recover my files what software should i use
View 4 Replies View RelatedPretty much all my music files (even ones in separate folders) with images associated with it (like files to show album covers which are hidden), folders inside that weren't viewable before, volume information, temporary files, etc. Which are normally hidden have suddenly become viewable and are also regarded as system files (they are all slightly greyed out along with the hidden box in properties).
View 1 Replies View RelatedFor the third time in a week, Windows 7 has replaced some of my personal data files with earlier versions, without my consent, following a restart. I'm talking about my outlook Data file (outlook.pst), my Quicken data files and a few others. Files are located in different places, but mostly in my Documents folder.
There are no errors, no crashes and no warning whatsoever. I just restart the PC and suddenly my data files are overwritten with sometimes days old versions. The first time it happened I assumed that maybe I hadn't properly saved my document(s), but then I noticed it actually WAS replacing current files with earlier versions. I would enter a few days worth of transactions into Quicken, save and even backup the files, only to have it revert back to a file that was saved two days ago after restarting the PC, causing me to have to re-enter all those transactions. Same thing with Outlook - I could add/change/remove appointments in my calendar, only to discover that it went back to an earlier time after the next restart, all changes made would be lost. Just a simple reboot is all it takes - the last time I had to reboot to update a driver. This is completely unexpected & unacceptable behavior. What would cause Windows 7 to do this?
I have searched trying to match my need to many different setups of user.I have a new laptop. shared by wife and myself. the account is set to administrator. set up user for myself so that I could have certain programs for my use only. when I try to install say Quicken it also appears in our joint account.how do I get a user account with only my programs and data files on my desktop and not on the main one we both use.
View 4 Replies View RelatedWhen i start downloading large data files with multiple connections (it does not matter which download manager i use - flash get, jdownloader, IDM) it starts to consume a lot of MB until it consumes all of it, but when i close the download manager only about 200 MB becomes free (before downloading started i had used only 900/2048 MB and after closing download manager, it is used ~1800 MB / 2048 MB and there is no program in task manager which would consume such a lot of memory and i can free the ram only by restarting computer. This happens to me on celan RC version and even on clean RTM version.
I have quite a fast conenction 50/50 Mbps so the RAM runs out quite fast (in 15 minutes i have no free ram).
This happens only in Windows 7 (in Vista, XP it downloads without any memory leak using the same download managers)
Does anyone have the same problem or know how to solve it?
I had some problems with my laptop and had to re-install my OS. I made a image backup of my HD with Acers's backup manager only to find it doesn't restore my data at all. (According to Acer this has become a common problem with the backup manager). I also made a copy of my HD luckily.
After spending some time on Google I discovered that the contacts, send emails and received emails were stored as an .eml file. I thought all was well and started searching through the copied data and found nothing. On top of that I discovered that the directory sections where the supposed files are stored, is not the same on the newly installed OS as it is on the copied data. For example:The copied data I searched in was under Users>username)>AppData>Local>Windows Live (or first) Microsoft>Windows Live but the new OS directory doesn't look the same.The windows Live 2011 I used before backing up was part of an update in the beginning of 2011 from MS and the one installed now I found on another site and then windows updated the rest. My OS must be the same as it's from a hidden partition on my Acer .
I have seen some XML files and don't know if this is a similar data file for WML.
How to Enable or Disable to Backup Data Files in Windows 7 ?
View 0 Replies View RelatedSo currently I have Windows Xp and Windows 7 /32bit installed. Windows XP on C Drive and Windows 7 on D.I would like to install Windows 7 /64 bit over windows XP so I can use more than 4G Ram. So I would have both 32 and 64 bit windows on the same PC. I have few questions: Can I somehow upgrade from XP to 7 without losing data and files? Will I still be able to go on the Windows 7 /32Bit?
View 3 Replies View RelatedCopied 32-bit version of cardfile.exe to my W7 PC and voila, it runs like a champ. Problem is I can't associate my Cardfile data files with the executable using the "Open With" function.
1. Copied 32-bit executable into a directory named "Cardfile" within "Program Files (x86)".
2. Copied my Cardfile data files to My Documents and renamed *.crd to *.car due to avoid Windows CardSpace association.
3. Right clicked on one of my *.car files and selected Open With.
4. Navigated to my cardfile.exe executable, clicked Open, but Windows won't accept association and keeps trying to open with Acrobat, first "registered" app on the apps list.
I think this is happening because cardfile.exe was not actually installed and therefore not registered. This was never a problem in XP, but MS always seems to they have to increasingly protect us from ourselves and now it's an issue.Anyone know how I can register cardfile.exe with the OS so I can associate my Cardfile files with the executable and open them directly?
So I've been using my 64GB ssd as my windows 7 boot drive and i have a 1TB hdd as my data drive. Recently the my computer has begun to freeze up with errors like "explorer.exe" has stopped responding or "windows" has stopped responding and half of the time when i try to boot it says it cant find windows. This has lead me to believe that my ssd is dying despite being only a year old. I need to RMA my ssd but to do that i would be losing my boot drive for weeks. So I thought id try to create a system image so that i can simply put my boot drive on my hdd, but when i try to create the image it says that the image would be 711GB because its including all of my hdd (which contains all my user libraries and downloads). My question is: how do I make windows stop thinking that my hdd is a system drive so that I can create a reasonably sized image, or more generally: how can i easily move my boot drive to my hdd? Also, I've read some posts about using "easyBCD" to accomplish the latter but I'm not sure that's exactly what i need in this situation.
View 4 Replies View Relatedjust did a fresh install of Windows 7 Ultimate on my second pc, all went well apart from it gets to amd data change update new data to dmi then..... stops, it wont budge, i haven't touched anything in the bios or added any new hardwear.When i reboot, same again, went into the bios and made sure i have it set to boot from hard drive first.
View 6 Replies View Relatedforum i have a question. I have a kingston 30 gb ssd i use as my windows drive, and a 750 gb wd hdd for data/game storage. I have heard that you can ghost a file on the data drive into the x86 folder so that all new installs go there and then you still recieve most of the benefits of your ssd w/o clogging it up. I have an amd based system (dont know if that matters or not)
View 1 Replies View RelatedI have a system drive on a workstation which is 1) removable, 2) contains 2 partitions - one for the sytem & data files, one reserved by the os.
I would like to use this drive and it's file data in an external drive case (SATA) connected to my notebook.
Will the notebook handle the external drive properly?
I have a problema with windows 7 professional (64 bit, sp1), and offline files.I'm trying the functionality of offline files with a NAS network (WD my book live).Specifically, I do not want to synchronize files with certain extensions (.nef and .cr2). With gpedit.msc in Computer Configuration -> Administrative Templates -> Network -> Offline Files, I enabled "exclude files by caching", entering (in the appropriate field), *.nef; *.cr2 But the files with this extension are synchronized anyway.
View 1 Replies View RelatedI have my tower pc on constant all day- to record a streaming IP Camera from my work.Initially, I saved these files into my docutments- which they would save as .avi files, and after every several days I would delete them as they would take up ALOT of space on my pc.My pc is 250GB in size, and usually it would be about 80GB full before I had the IP Camera. Just recently, I noticed all of the IP Camera avi files seemed to have disappeared from my documents if I went directly to the folder... I could still see them in documents when I was choosing a location to save the recordings.Upon right-clicking the avi files in the latter, the files would be of no size and wouldn't play.Now my computer is 210GB full in the matter of a week.
View 1 Replies View RelatedMy wife has Windows 7 home premium x64 on her laptop and is using Word 2007. The problem she is having is she will open a word file, change it up, save it, then re-open it later and its the old file not the new one. Where as I can open the edited file on my desktop running the same OS but with Word 2010 and the file that opens for me is the newest version.
View 3 Replies View RelatedMy offline files seems to work offline all the time, even when it shows me being online. I sync most of my business files to my laptop for working at home at night. When I edit a file from my Win 7 (pro, 64-bit) laptop, then go to edit it again, I get the version I had changed, but no one else does. This is causing huge difficulty, because my employees will start working in a sales forecast spreadsheet after I reconnect to the network and supposedly sync, but they don't get the latest version. Even doing a manual sync seems to make no difference.
View 2 Replies View RelatedI have a system with 32gb DDR3-2400, a 256GB SSD and a couple of spinners. I have set up 4gb of the RAM to be used as another RAMdisk using the softperfect software. This problem has been going on for some time, but has been more of a problem since I started using the RAMdisk. Not because the RAMdisk itself isn't working well, because the stuff that is stored there keeps getting reset.I have pretty much identified that when updates are installed through windows update (either from Microsoft update or from my WSUS server), the following are reset to defaults
1. Pagefile is automatically managed and stored on the C: drive and is set to 32gb
2. The TEMP and TMP environment variables are reset to the C:users default location
3. The temporary Internet Files location is reset to the default C:users... location
There may be others that I have not discovered.I have manually set my swap file to 1024/2048 on the D: drive (a spinner), on the belief that it should rarely if ever be needed with a system equipped with 32GB of RAM. I'm certainly not inclined to waste 32GB of space on my SSD for an unused object.I have placed the TMP/TEMP files, cookies and Temporary Internet files on the RAMdisk to squeeze a little extra performance out of the system. (Yes, I know, I'm not really getting much benefit).Photoshop and a few other programs also use the RAMdisk as a scratch disk, and were the main reason I set it up in the first place.This is becoming a real pain when it gets reset as I have to manually change everything again. Anyone know a way to make windows leave settings at what I set them, instead of having it continually reset the values to what it wants? I'd prefer to have it my way. I know there will be proponents of "leave things as windows wants it".
Is there a way to make SFC use the Windows 7 DVD for files to be replaced instead of the files on the hard drive?
View 9 Replies View RelatedI didn't used to have this problem before. For some unknown reason, all my video files have a separate PNG file next to it with a picture of the thumbnail. I don't remember changing any viewing options that may have triggered this.
View 2 Replies View Related
