An Unhandled Win32 Exception Occurred In Passmacleaner.exe [268]
Dec 13, 2012i got the error that passmacleaner.exe is missing,restore it but i don't have that exe give me the link for that exe.
View 1 Repliesi got the error that passmacleaner.exe is missing,restore it but i don't have that exe give me the link for that exe.
View 1 Replies.NET Framework - Unhandled exception has occurred....
View 1 Replies View RelatedI am trying to run a program on my conputer which I have run many times before.Yesterday when I tried to run it I get a message "unhandled exception". This prevents me from running the program. In the dialoge box it says to press continue and the message will be ignored and try to run the program but it just shades out the program and I cannot do anything .
View 8 Replies View RelatedA couple of weeks ago this started happening : "Internet Explorer Unhandled Exception in third party module and should be closed. We are sorry for the inconvenience." Send Report Close . Then IE closes and reopens. As many as 3 - 4 times on the same site?
Here is my info :
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bit
Processor: AMD Athlon(tm) 7550 Dual-Core Processor, x64 Family 16 Model 2 Stepping 3
Processor Count: 2
RAM: 2942 Mb
Graphics Card: NVIDIA GeForce 6150SE nForce 430 , 128 Mb
Hard Drives: C: Total - 293688 MB, Free - 84392 MB; D: Total - 11554 MB, Free - 1256 MB;
Motherboard: PEGATRON CORPORATION, NARRA5, 5.00, 100669550003562
Antivirus: avast! Antivirus, Updated and Enabled
Well every time i start up my computer i get this error message "Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click quit, the application will close immediately." Access to the path 'C:windowssystem32dllhost.exe' is denied. These are the details....See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.UnauthorizedAccessException: Access to the path 'C:Windowssystem32dllhost.exe' is denied.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.Delete(String path)
[code].....
I get the following message "The exception unknown software exception (0xc06d007e) occurred in the application at location 0x759fd36f"
View 4 Replies View RelatedI have windows 7 64 bit and i dled and installed windows debugging tool from here Windows Software Development Kit (SDK) for Windows 8 i'm aware it's for windows 8 but a thread on this forum directed me to it for windows 7 so.. idk. and i couldn't find Windows 7 versions
after installed, i tried to open a .dmp file from C:windowsminidump but i got this error
did i install the right one? i'm having such a hard time opening these files just to find how why i've been bsoding so much recently ><
How do I remove this virus
View 2 Replies View Relatedneed to fix this problem so i can download pdf files
View 1 Replies View Relatedpdf is not a valid win32application how cani fix this
View 2 Replies View Relatedhave win32/small.ca virus in my computer can u
View 1 Replies View RelatedRunning Windows 7 Home Premium 64bit. Computer is running well and installing new programs, but get the above message when I try to access any Administrative services and some other control panel programs. Have run following: in repair mode:
sfc scannow
bootrec /fixMBR
bootrec /fixBoot
bootrec /rebuildBCD
chkdsk c: /fix
regsvr32 /i shell32.dll
bootsec /nt60 c: /mbr
number of anti-virus and anti-malware programs.
I am having a problem reading some CDs on my Win7 64 bit machine. On the ones which don't work the properties window shows it as empty and the disk checker says it is not formatted.. The program CDCheck says that the CD has Win32 type file system, and that this is not recognized by my system.
Is there any way of getting my system to read the Win32 file system CD?
When I boot I get the following; Cannot open NVCPL.DLL, not compatible with Win 32. Everything seems to be running fine. Should I do anything? I'm running Window 7 Ultimate 64 bit., with NVIDIA GeForce 210.
View 5 Replies View RelatedI have downloawaded a file and when i tired to clean my cumputer using Microsoft security essensial, it cannot remove hacktool win32 keygen, I have already run the DDS scan, but I don't know how to attach it here.
View 1 Replies View RelatedD:mypcdocumentscredencial.pra is not a valid win32 application.
View 1 Replies View Relatedc:windowssystem32cmd.exe not a valid win32 application ,, this is the error i got when trying to open the command prompt .Also there is no cmd.com file in there as some asked to delete but cmd.exe is of 0 bytes.
View 2 Replies View RelatedHow can I install the office 2007 win 32 without cd?I have the security key..
View 5 Replies View RelatedHave eset and it identifies the trojan but cannot remove. Have used super anti-spyware and malware bytes neither even identifies trojan. Have run eset and malware bytes in safe mode to no avail. Finally, tried system restore to an earlier date, have not yet turned computer on since then.
View 18 Replies View Relatedmy config:
Processor: AMD Phenom II x4 945 AM3
Motherboard: Gigabyte GA-790FXTA-UD5 AM3, BIOS F2
RAM: DDR3 Mushkin 996776 4x4 GB (16GB)
graphics: Gigabyte Radeon HD 7950 GV-R795WF3-3GD
[code]....
SSD, Radeon HD 7950 and Mushkin ddr3 are the newest parts. But I'm experiencing random BSODs (ntoskrnl.exe). There were also BSODs related to dwm.exe, but they disapeared when I installed Catalyst 12.8. Sometimes there are hardlocks without BSODs - ctrs+alt+del doesn't work here so I have to do a hard reset.First I thought it might be related to Radeon 7950 and compatibility problems - F2 (2009) is the latest BIOS for my motherboard (there is also F3J but still beta). Now it seems to be ok after I installed Catalyst 12.8.Then I thought that the SSD connected to Marvell controller is the problem. Well, there is a problem cause BIOS sometimes cannot see this SSD. Now Im thinking of buying a newest motherboard... unfortunately. I updated Marvell Controller drivers, still the same.Next thing - I ran memtest86+ ver. 4.20 to check memory. Pass 0 (Modulo 20, Random pattern) - there's only one error:
Test 8, Pass 0, Failing address 00080073468 - 2048.4mb
Good: e17e40c8
Bad: e17e00c8
Err-Bits: 00004000
Count 1
Next pass - no error. I let Memtest complete 6 passes. I got only this one error.BIOS settings:
tCL: 9
tRCD: 9
tRP: 9
tRAS: 24
Ram voltage - 1.635v set memory voltage to 1.650V. First MemTest pass - no errors. Second pass also completed. I think that all four sticks are ok. I can't say it's overheating. I'd say the memory is getting warm (even not so warm), but not hot. Third MemTest pass also was completed. No lock ups. Probably too low voltage could generate errors.Today I got another BSOD:
2012-08-28 19:38:20 SYSTEM_SERVICE_EXCEPTION 0x0000003b 00000000`c0000005 fffff880`0404a609 fffff880`0b98e9b0 00000000`00000000 tdx.sys tdx.sys+3609 x64 ntoskrnl.exe+7f1c0 C:WindowsMinidump�82812-36504-01.dmp 4 15 7601 276 112
Some background info: I am running Windows 7 Ultimate. It is 64-bit. I am running it on a laptop. I have no idea why I got the BSOD, but I did get it today. Restarted the computer in safe mode, then restarted again in "regular" mode and everything was fine. I'm typing on the same computer now (it's the only one I have, okay?). Can't think of anything that would be wrong with the computer, except the charger broke (I'm pretty sure this is a charger issue, and a new one is in the mail) so the battery doesn't charge: I have to have the computer plugged in when I use it.
View 4 Replies View RelatedHow to Add or Remove a Windows Firewall Exception in Windows 7 ?
View 0 Replies View RelatedSo I finally get everything installed and running. I updated my gfx drivers to the latest at the time(a couple weeks ago) and things worked.
The computer had been shut off for probably a week maybe longer. Turn the computer on, right after I login, bam, BSOD. system_service_exception.
So I do some searching on another computer. Most of the things come up talking about gfx drivers being the problem, but nothing definite.
I rolled back the drivers. Things work fine. ATI released a new driver catalyst 9.11. I install that, everything is fine. computer was shut down and restarted and still worked fine.
I fire up the computer tonight, bam, BSOD. Same message as before. So I rolled back the gfx driver and now it's working normal again.
Does it make sense for the computer to be working fine with the newer drivers, be shut down for a while, and then not work? Cause that doesn't make sense to me.
There's also not much information out there regarding this system_service_exception BSOD that comes up. It would be nice to have some better concrete info on it.
current setup:
gigabyte ga-ma790gpt-ud3h
amd x4 955
g.skill 4gb ddr3
WD caviar black 750 gb
Windows 7 64 bit home premium
On an avast scan it is detected 3 different win32:cycbot-KI infections. Two of the infections are in the sys\wow64\kernel32.dll (emul) and the third is in the sys\winsxs folder. I am unable to get avast to quarantine them and receive the message "error: virus chest server is not running" whenever I try to quarantine. I tried doing a boot scan but it was very slow and I received hundreds of error 0x80000006 (no more files) messages which I either quarantined or ignored (it prompted me for each one). I'm not sure that the boot scan did anything because after I ran it I still saw the 3 cycbot infections.
View 8 Replies View RelatedUnable to open large picture with win32. What can I do?
View 1 Replies View Relatedi have Microsoft security essentials and it detected that i have this virus trojan win32 alureon program .i tried to remove it with the program and reboot but it did not work.
View 1 Replies View RelatedExplorer exe is not a valid win32 application windows 7?
View 1 Replies View RelatedYesterday I wanted to use my HP laptop with my TV so I connected it using an hdmi cable. Everything connected fine and I opened up my cyberlink youcam software to adjust the camera settings. I got up for a minute to do something and when I came back the computer had gone to the blue screen of death (displayed right on the tv screen). The error was SYSTEM_SERVICE_EXCEPTION. This is the first time this happened so im not sure what to think. According to the HP website all of my drivers are up to date so I don't think that would be the problem.
I attached the dmp file and screenshots of my system specifications.
I am receiving the following error and unable to determine where this is coming from:
Exception EOSError in module rtl120.bpl at 0002AF01. System error. Code 1450 Insuffucuent system resources exist to complete requested service.
Almost as soon as I log in to my laptop it crashes. I can use safe mode and I keep my malwarebytes updated so I am unsure as to what could be happening. Here is the data dump:
Bug Check String- KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code- 0x0000001e
Parameter 1- ffffffff`c0000005
Parameter 2- fffff800`03506045
Parameter 3- 00000000`00000000
Parameter 4- ffffffff`ffffffff
Caused by Driver- ntoskrnl.exe
Caused by Address- ntoskrnl.exe+7cd40
Since building a new computer a few months back, I have been having issues with BSOD's while playing certain games like Battlefield 3 or Wow. But Skyrim and others are fine. I've tried many different drivers for ati and I'm currently using 11.12, but crashes still happen. I don't believe its a overheating problem as the temps are all low. WhoCrashed suggests a driver issue and has singled out ati as the possible issue a few times.
GA-990XA-UD3
AX6950 1bg
AMD Phenom II x 4 965
G.Skil 6b (3x2bg) RAM
Do these crash dumps show any type of noticeable pattern for the crashes?