So a friend of mine has a folder setup on his PC that he can access by inputting IP address, along with some other information. It looks similar to this: \151.x.x.xxxdatadata. How would I go about setting something up similarly on mine? I run Server 08 R2 if it matters?
View 6 RepliesI recently made a folder to share with an XP machine. When I look at the network through my seven machine I see the folder I shared and the USERS folder shared as well. Why is that? I have the network setup at a home network. 7100 32 bit.
View 6 Replies View RelatedI have Windows 7 Professional x64.My pictures are located in this folder: L:Users<name>My Pictures
I want to share this folder with another user on my computer. Can't do it.
Simply altering the folder's permissions doesn't work. If I change permissions so that the folder in question does not inherit any permissions from parent folders, and instead allow my user read-only access to the folder...access denied.
Alright then, I tried to share the folder with my user. Although sharing usually means sharing with other computers on a network, it also applies to other users on the same machine. But the user can't access the shared folder...access denied.
I could move the folder in question to the Public user, but then everyone can see it. Holy cow...what does it take to share a folder with another user on the same computer?
I m trying to connect two PC using IPv6 and i m getting reply to connected but i can't access shared folder it say Network Error Windows can't access.i m tried following Address \fe80::1 So How can i get shared folder Using IPv6..
View 1 Replies View RelatedWhenever I move folders from my shared folders ( Users/public/public documents for example) it copies the files instead of just simply moving them. The folders are on the same hard drive/partition so there does not seem to be any reason it should start doing this. I dont know what I could have changed on the computer to cause this to happen either. it is quite a frustrating problem however because large files take a while to transfer when they should be moved instantly.
View 6 Replies View RelatedRecently a few computers in our domain has switched to Win 7 from Win XP. Now after sharing folder shared folder are not visible while accessing that computer from our Win CE device. Windows XP or Win 7 users can browse shared folders but not WinCE device.Media Streaming, Network discovery, File sharing is Off. Firewall is turn off.
View 10 Replies View RelatedI am running winows 7 ultimate 32bit as a server, i have the c: drive shared to all 13 users on the network. All 13 computers are running windows xp pro. The problem that I am having is this:When i open up the shared c: drive on a windows xp computer, and open a folder to view files, it only shows 122 out of the 227 files.when i open up the c: drive on the windwos 7 machine, i can see all 227 files.when i open up excel or word, and open a file that is stored on the windows 7 machine, it will open fine, but when i try and browse for the file that is stored on the windows 7 machine, it does not show it.now here is the interesting thing:when i open up the shared c: drive on another computer running windows 7, (not the server) i can see all 227 files and have no problems.i have multiple folders, ex: mypics2008, mypics2009, mypics2010, mypics2001, mydocs2000, mydocs2010, all shared off of the c: drive on the windows 7 server. this problem started a few weeks ago, i was able to see all the files in every shared folder off of the windows 7 server through all of the windows xp pr machines a month ago, and all of a sudden in the past few weeks, i am no longer able to see all of the files shared off of the server.i have rebuilt the index on the windows 7 server i have removed and redone ALL security, and sharing settings i have checked, rechecked and checked again all the file sharing settings I am stumped, and i consider myself knowledgable with computers.
View 4 Replies View RelatedI explain how frustrating this has been...Ok, so just a very brief back story, my job has a shared Toshiba file, where all scanned documents, and received faxes can be viewed as PDFs. Everything was fine until my computer (Windows XP) crashed, and I rebooted it with Windows 7. Everything else has been fine, but resetting up this file has been a nightmare. After about 15 calls, someone was finally able to create a folder that worked yesterday, however today it is back to the drawing board. , the folder that was set up was NOT the same one that my co-workers use, which is fine as long as I can access the data, but for whatever reason it is not working...I don't know if it has to do with the network path, the file name, or what.
Now, I am definitely hooked up to the network, and I definitely have network discovery on. Password protect is not on so that anyone can view the shared documents. If it makes any difference, the printer/copier/fax machine/scanner is a Toshiba E-Studio202L machine. When I click homegroup/sharing options, everything is checked off...I really do not know what the problem is, as the documents are just not getting forwarded to my folder (or any folder).
How do i stop my personal folder from being shared? I am not part of a homegroup.Under the advanced tab, sharing is not ticked and the 'share with' is set to nobody.
View 4 Replies View RelatedI've got two Vista Ultimate computers. Both have the same username and password. Same workgroup name.
Password protected sharing is enabled on both. I shared a folder on computer 1, and added Everyone to the security tab, with full control.
When i try to map the folder from computer 2, I can see computer 1 listed. But when I click on the + next to it, it asks for a username and password (which I did not expect to be necessary since they are both the same user account and password) and when I enter it it says Logon Unsuccessful.
I have just created a VHD on my laptop so I can share is as a shared area as I have over 5 computers in my house. I want the whole household to have access to the drive but not to a folder that i own as it contains private stuff. How would I go about protecting a folder from being accessed without the correct password and username. Or maybe, how would i go about stopping the folder from being accessed from the whole network but being able to access it on the local machine?
View 4 Replies View RelatedI have 4 worstations in the same HomeGroup I can access the files of workstation 1 from the two workstations but the 3th one in the 3th one the the shared folder appears but when I try to aceess the files inside I get an error can't acess contact administrator the pasword protection is disabled in the workstation 1 and I can access the files from the other two workstations so I have no clue what is going on I have disabled the firewall and Norton IS on both workstations but still can't access the content of the sahred folder
View 3 Replies View RelatedI recently replaced a Freeagent Pro with a Goflex Desk. Both the new and old drives were permanently assigned drive letter H and the new drive fitted in seamlessly about a week ago. The old drive is not used My Synctoy backups (run via Task Scheduler) all worked fine daily from 28th July until today when H was not found.I checked the properties and sharing was unchecked (not by any human hand!)The drive is permanently attached via USB.
View 2 Replies View RelatedWindows 7 adding network drive shortcuts to taskar. I'm searching a similar way with XP Quick launch bar to add some network folders (which aren't mapped as drives) to taskbar.hen dragging to taskbar, there opens a window (Pinned/Recent/) which I understand means shortcut has now pinned. Now there are listed already several network shortcuts, but still these are not visible on taskbar. Where do these go and how to make these visible? It looks like it's a separate toolbar, where I can open already previously dragged shortcuts, but how to open it without dragging a new network shortcut to taskbar?When dragging an application to tasbar, there isn't such a window and application shortcut is added without any question asked.It seems like Windows 7 doesn't support dragging and creating network shares shortcuts directly onto taskabar or did I missed something essential?
View 1 Replies View RelatedI have a file sharing server and about 10 client computers that access files on this server.
What i would like to have is when each client computer wants to access any of the files on the server that they are prompted with a usernamepassword dialog.
I do not want to create each user on server if i dont have to. The server is Windows 7 Pro 64Bit 6 of the client computer are Windows 7 Pro 64Bit 4 of the client computers are XP Pro
I'm sharing a folder with other PCs on the network and it works fine, except in this case:1. file in D:folder1 (normal folder)2. move file to D:folder2 (shared folder)3. file not visible from other PCs
View 2 Replies View RelatedI'm trying to access a shared folder on my windows xp machine. i went to map network drive, use different credentials, and typed in the account name and password that i had given rights to on the other computer. but it just reprompted for different credentials.as a temporary fix i created a user on this computer with the exact same credentials as the ones i typed in, and it works for that user. so apparently the computer didnt understand what i typed in for 'use different credentials'?
View 2 Replies View RelatedHow to set permission for shared folder for windows 7 32bit?
View 1 Replies View RelatedI'm trying to share a folder on my computer (N:TV, where N is an internal hard disk) on my local area network. Two media centers connect to this folder. Until this week, they connected just fine using no username or password. Suddenly, they want to know a password -- and even entering my Windows credentials (my user account being the only one on the machine), access is denied.
I've selected the folder I want to share, and viewed its properties. It's shared with Everyone for reading. I can access the folder by opening \Mycomputer\TV in Explorer.Network discovery is turned off. File and printer sharing is turned on. Password protected sharing is turned off. All three machines are in the same workgroup.
I just noticed two of my computers are automatically sharing the entire user's directory with all permissions for everyone, I was reading up on this a bit before and it seems it's a Windows bug. I was wondering, since the password protected sharing is turned on by default, would anyone have been able to gain access to my computers information if they didn't have a user account / password or would they need an account / password no matter what the permissions are set to.
View 1 Replies View RelatedI made a work group between 1 window seven PC and 2 window XP PC.In Window7 PC I shared folders and can see them in the 2 window XP all files and subfolders that are already in the folders before were shared. But all the files and subfolders that add after were shared I can't see.I found the subfolders that add after the shared folder was created were not shared and if I shared the subfolder I can see; but with the files nothing.How can I see all files and subfolders added to the shared folder after created?
View 1 Replies View Related've got a problem getting offline folder permissions to stick after restarts in our domain. Here's what I do:Go to MC>shared folders>shares>C$ (as an example)>properties>offline settings> and then I change "only files and folders users specify..." to "All files...". Apply and done.It works like a champ for what I'm trying to do (enable Restore Previous Versions of files to actually work- I learned that RPV fix from another thread here at seven), but after each restart the settings are restored to default. I'm assuming there's a group policy I can implement that'll auto-set those permissions permanently but I can't find any 'offline' shared folder permissions options anywhere
View 2 Replies View RelatedI have a windows 7 pc that is part of an office network along with about 5 other machines. They are all supposed to connect to a server via network mapping of the server's shared folder. (In this case the mapping is Z:\pi-serverdata and the server is running 2008 R2 on a workgroup). Upon reboot, all systems but one will remap to this drive with no problem.
The one machine will always boot up with the message 'Windows could not reconnect network drives' The mapping is showing in windows explorer but there is a red 'x' icon showing the connection is lost. When I click on it, it prompts for windows credentials, which I enter and then it remaps with no problems. However upon next boot the same thing happens again. No matter what I try I cannot get the system to retain the credentials.
What I have tried so far:
1. Ensuring that there is a match of user names and passwords on the server and workstation.
2. Deleting the mapping and re-adding it.
3. Running a batch file to delay the mapping in order for windows to finish connecting the network first.
I would like to be able to browse to the network folder via network discovery through the workgroup but this particular machine does not have the server show up in the network listing (all other machines do show the server). Plus when pinging the server, it insists on responding with ipv6 unless I force a v4 ping...not sure it's relevant.
I have few computer at home with different Windows version, there are Windows XP, Windows Vista HP 32 bit and Windows 7 HP 64 bit. I have two share folder in the desktop using Windows Vista HP 32 bit, Share A is set to Full Control for Everyone and Share B has a permission access setting, allow few persons to access only. All computer can access Share A without problem. However, there is a problem with Share B. I only allow 3 users to access this share folder, 2 of them using laptop with Windows XP Home and Professional, they can access Share B without problem, the 3rd user using laptop with Windows 7 HP 64 bit (username is Jolene) can't access Share B, it shown "You have no permission to access...". I already double check the user name and password, there are correct. I try to login to the network using Jolene in other laptop with Windows XP, it can access both Share A and B. That means the username and the permission setting are correct in the Windows Vista desktop. I removed the anti virus in Windows 7 HP laptop, disable Windows firewall, or bootup in Safe mode with network support, but still can't access Share B.
View 7 Replies View RelatedI have 10 pcs on a LAN workgroup. They are mixed Windows 7 and xp. I have set the file sharing, net discovery etc on win 7 on and password protection, firewall off.They all have user accounts like pc1, pc2,...pc10 and I have also created the account of the pc I want to access the restricted folder to the pc that shares it.I have set the ownerships on Windows 7 machines too. I can access the folders on XP machines from the Windows 7 successfully. When I try to set a user-restricted shared folder to a Windows 7 pc and access it from XP I fail. It says that I do not have sufficient rights to access the folder, contact the network admin. I can only access to the folder by setting it available to "everyone" or "guest" read/write but that s not what I want.
View 4 Replies View RelatedMy 5 Windows 7 ultimate x64 pc will share their drive with each other completely.Without any restrictions (full read/write/modify access )I do not want any PC asking for User Id and password when the access the shared drive.What i know basically is i will be having same workgroup on each PC .I will turn on Network Discovery and enable file and printer sharing.Will turn off Password Protected Sharing radio button.Now doing this what i need is,1. what type of user accounts i need on my each pc? (every pc log in to with its own different user name and password)2. In advance sharing tab,just using EVERYONE will solve my problem?(along with NTFS permissions)
View 9 Replies View RelatedFrom virtual xp guest I can't access a shared folder on server 2003 machine.I can access it from windows 7 host.The Host, virtual xp, and server are all on the same workgroup.
View 3 Replies View RelatedHow can I restrict user from finance department to access share folder in server? just that particular department. What I know I can set in the permission 1by1. But the department has 100 user. Is there anyway to actually set to restrict this 100 user from accessing the share folder in the server?
View 2 Replies View RelatedHow do I get it to save in the shared mailbox folder not my personal folder in outlook 2010?
View 1 Replies View RelatedI bought a new wireless Epson Workforce 545 printer. It has worked without flow for quite some time (nearly a year). Now all the suddenly it wont print.I have it as a shared printer. There are three other family members on the network and all three others print without any problem. Mine worked fine and now wont print. It goes through the motions and then times out. All it says is "printer error".
View 8 Replies View RelatedI am able to access shraed folders and shared printers, I Not able to see anything...
View 2 Replies View Related