Wasn't exactly sure where to put this question.I have a machine with a h67a-ud3h-b3 MOBO abd an currently using both video outputs. Nice board. Does anyone know if I can add an addtional video card to the board without having to disable the on-board video. Yes, I'd like a 3 or 4 monitor system. Everything I've found on the subject is very vague.
View 1 RepliesUsing Win 7 64-bit with AMD SATA drivers with a strange issue.
When this board boots up it does an AHCI initialization which shows the attached sata drives. After that, Windows 7 loads and runs without a problem. However, when I reboot Windows it sounds like the hard drives spin speed is slowing down then speeding up again.
It does this about 4 times then the computer shuts down. When the computer restarts and goes back to the AHCI init screen it now shows "S.M.A.R.T. Error", but Windows boots without a problem. If the computer is shut down (powered off) the next boot will not show the error.
I've had Windows 7RC 32-bit, and currently also have XP-64 and XP-32 partitions on this machine with no problems at all. If I set the machine to Native IDE instead of AHCI everything goes back to normal with no shutdown issues.
Any ideas?
I installed all the drivers available from the Gigabyte website for some reason the wifi function simply does not work. Also, the screen plugged into the 7950 works fine but the other screen connected into the motherboard gets the message "no signal detected".
View 1 Replies View Relatedmy computer (windows xp) language is hangaren. i cannot change the language to english.
View 2 Replies View RelatedI got my laptop with Windows 7 Home Premium 64-bit yesterday and so far I'm unable to fix the problem with my native language shown as hieroglyphs. I attach a screenshot : Uploaded with ImageShack.us
I can't even find that Install/Uninstall Language.
The Gigabyte Z77X-UD5H WB comes with a Wireless Adapter/Bluetooth PCIe card.
Atheros AR5BWB222. Gigabyte calls it a GC-WB300D
The driver is being reported as having an issue by a splat in device manager with the following message: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52). The Card works fine in another system that also runs Windows 7 x64 Pro.
I have called Gigabyte, uninstalled and the reverse in safe mode also. Done everything I know. Why it works in one system and not this one is the key. Once it was seen to work on another system Gigabyte tossed me into the ditch.
I have tried drivers from the boxed CD and their site. The Bluetooth side of the card which uses its own drivers is OK.
Windows 7 X64 Pro SP1
Gigabyte Z77X-UD5H WB
Intel 3770K
Kingston 16GB 2133 Genesis RAM
Corsair 750Watt Pro Series
Sapphire 6850 GPU
I have a Western Digital 1 TB USB 2.0 that I have connected to a computer that has Gigabyte connection to my NAS which can handle Gigabyte speeds.I am only getting 30.1MB/s.Is there any settings I can do to windows so that it can send faster?
View 1 Replies View RelatedI bought a Gigabyte GA-Z68X-UD3H-B3 mobo and while checking the Memory QVL on their website I saw that they have not listed 8gb individual sticks of ram.They provide the Module P/N of 2x4gb and 2x2gb ram packages.I have learn that the Module P/N number has to be very respected to secure the compatibility, but when I for example look for the 2x4gb ram package specs on a different package (1x8gb), the Module P/N changes slightly and it is not found on my mobo's QVL. Is there a problem if I choose the 1x8gb package even thought the serial number varies slightly?I already bought a 2x4gb ram package because I did not think that in order to take full advantage of ram slots capacity (get to 32gb) I have to use 1x8gb sticks.So now that I have 2x4gb ram in my system, is it possible to use the other 2 empty slots and use a 2x8gb package in order to have 24gb in my system?
View 9 Replies View Relatedi have wondows 7 and i cant find driver for my dysplay card i need intel 915gm for windows 7.
View 7 Replies View RelatedFirstly my hardware:CPU: Phenom x3 720GPU: MSI Radeon 6850 OC (bought about week ago)RAM: 2x Kingston HyperX DDR2 1066MhzMOBO: Ta790gx 128MPOWER: Seasonic Ss500et 500WMONITOR: Old Daytek 17" (D-Sub slot)Today everything worked fine, but after reboot my monitor didn't display anything. Diode was shining as in sleep mode. I tried to use second DVI port (with DVI->D-Sub adapter) but no difference and PC wasn't running well(no BIOS beep and PC was stopped i think). I unplugged my Radeon card and connected monitor to integrated card and then it was working perfectly. But... I have DVI and D-Sub integrated, first one doesn't work with adapter, D-Sub works... Weird... I decided to plug again my Radeon and check again, but the same as before. I am confused, don't know now that card is broken or maybe this adapter?
View 7 Replies View Relatedi have a compaq persario sr1630nx i just remove the graphics card i had on it do to a malfunction. and i plugged in my monitor to the original input and it looks all blurry?
View 9 Replies View Relatedwhat inexpensive video card for dual display?
View 9 Replies View RelatedI don't know what it is but Windows 7 doesn't recognize my graphics card for some reason....... I have scanned several times for driver updates, still nothing seems to fix my problem.I don't know what causes this, dxdiag displays everything else properly as far as I know. [code]
View 9 Replies View Relatedhow does the multi display graphics card work
View 1 Replies View RelatedI got a new video card at work to install and nothing will show up when I plug it in. I can go through the computers VGA and it works fine, but when I go to the video card only a black screen. Any help? Can't download drivers either, only black screen upon boot.
View 8 Replies View RelatedI have a Samsung RC512 SO2 Netbook w/ Windows 7 Home Premium 64bit.My Computer has two videos cards in it:
1) Intel(R) HD Graphics 3000
2) NVIDIA GeForce GT 525M
Currently it is using the Intel card for my built-in display on the laptop.The max resolution is only 1366 x 728. I am looking for any way to jack up the resolution.Is there a way to switch the built-in monitor's video card to the GeForce, with hopes that it offers a higher resolution?The only thing I could find is a way to utilize the Nvidia card for another monitor if I plug it in, but not for the built-in display of the laptop.
Video card for windows display driver model
View 11 Replies View Relatedabout a year ago I had a problem with my pc where I would get the error message "display driver has stopped responding and has successfully recovered" and the occasional BSOD. I solved this problem by simply flashing my bios. However a similar problem has now arrived ( note I have not changed any hardware since the last error) where:
- There is a constant buzzing from my monitor ( NOT a problem with the monitor as it works fine in safe mode with no buzzing, which is why I suspect a gpu problem)
- I get random "display driver has stopped responding and has successfully recovered" messages, but no BSODs. OR the display just goes black and I have to hard reset my pc.
Currently I'm using Comodo Internet Security as a firewall and I'm planning to build a home network using Windows 7 Homegroup and thought that Comodo might be an obstacle in doing that.
So my question is, as a normal home user of Windows 7, do I really need a 3rd party firewall other than Windows 7's firewall?
I keep getting this message which says that Additional log on information is required.Sometimes i get this message when i boot windows or sometimes when i logoff and log into windows again.
View 4 Replies View RelatedI am using Windows 7 Ultimate 32 bit. Because of business purpose, I need five Additional Clocks. But Windows 7 has only two Additional Clocks.
View 1 Replies View RelatedI'm trying to install additional voices for Windows 7 narrator and other Text to Speech Programs. I have downloaded and installed this: Download: Microsoft Speech Platform - Runtime (Version 11) - Microsoft Download Center - Download Details, and then few of these: Download: Microsoft Speech Platform - Runtime Languages (Version 11) - Microsoft Download Center - Download Details (I am using Windows 7 64Bit Ultimate on a desktop PC) But I am not able to find the option to use these newly instlled voices for text to speech.
View 1 Replies View Relatedi have pro book 4530 s .i formatted the hard drive and hp-tools drive deleted. when i was going to install one driver ,that driver needed to installed on "HP-tools" drive the driver installer said do you want to create the hp-tools drive i clicked on yes : but this error was shown: main drive already has four partitions,additional partion can not be created (also when i was going to install windows i couldn't have more than 3 partition!)
View 9 Replies View Relatedcan I add an additional taskbar to W7? I'm used to a clean wall on XP
View 2 Replies View RelatedI get blank taskbar items when a program displays a 'toast' - I have only noticed it with Skype and Teamviewer. See screenshot attached.
View 1 Replies View RelatedMy setup: Windows 7 Ultimate x64 on ThinkPad T510. 1HD, two partitions (C and D).I just reinstalled my system and encrypted C; however, there is absolutely no option to encrypt D. I've tried accessing the drive from admin account and still nothing. When I open BitLocker management, it only lists partition C and not D.Here is some additional information that might or might not matter: I tried to restore my Windows 7 from an Acronis image and it was unsuccessful. Tried it twice and during booting POST showed two different W7s installed, which was incorrect. When I finally installed Windows 7 from scratch, the extra W7s were still appearing before startup and I had to use EasyBCD to remove them. Now when I am trying to backup partition C, Acronis says that my System Reserved Partition (SRP) is on partition D. My hunch is that Acronis messed up my drive D when I was trying to restore my C partition. Then when I did a fresh Windows 7 install, the SRP incorrectly ended up in D and since SRP cannot be encrypted, that means that my entire drive D can�t be encrypted either. I am dreading about going through formatting my 750GB HD and installing Windows 7 and encrypting it yet again. I read somewhere that you can use software like Acronis Disk Manager to move the SRP to drive C, but I am not sure how this will work because when I open the native winodws Disk Management, I don�t see SRP there.
View 3 Replies View RelatedWindows 7 64bit Retail version, installed about 6 months
I built the computer for my wife, and was awaiting some items to come into stock, so I had only 4gb of ripjaw ram when first installed everything, and everything ran perfectly.
I got my second lot of ram an additional 4gb of ripjaw ram, same model and mhz rating, however once installed BSOD appeared time and time again, I couldn't track down the problem, I ran mem tests, and came back that there was some errors, I took all 4 sticks back and had them replaced, one set was exchanged on the spot the other took about 2 months, so cruising along on 4gb of ram again, and all is well, receive my additional sticks, and within 2 minutes of loging in, BSOD...
The Motherboard has 4 slots, and is compatable with this ram, the slots are colour coded, blue and white (from memory) and the pairs are in the own colours, pair 1 in the blue slots (1 & 3 slots) and pair 2 are in the white slots (2 & 4 slots), once i pull the additional ram out, back to normal.
After installing today's (13-11-2012) updates, I constantly get the following message: 'Additional log on information may be required - click to open you browser' If I execute my browser nothing happens (off course) I'm on a cable internet connection which doesn't require log on information what so ever. PC is via Ethernet cable connected to a linksys 54GL DD-WRT router.How can I fix this annoying andstupid problem?
View 9 Replies View RelatedI recently bought a new computer, it came with a 1TB hdd which was mounted. I had a new 1TB HDD already, and when i tried mounting it, it was to small, the HDD that the pc came with had some plastics on it's sides that held it properly.I mounted the HDD and put it on the Case floor, it's working but recently i've been getting I/O errors, it all solved when i unplugged and plugged it again, but my question is, how do i mount it properly without those plastics as i don't know what they are or how they are called?
View 1 Replies View RelatedI am upgrading my HTPC that i put together a few years back to have a SSD as a boot drive to increase space, quiet background running and speed up booting, etc.Everything was running fine before trying to exchange the raptor for the m4. I had a big issue getting Windows installed on m4 but finally did a clean install when no harddrive was connected except the SSD to the original SATA port of the boot drive. Once I had windows installed, and i was able to boot up with only the SSD attached to the boot SATA port, I attached the 3 storage drives to their original SATA ports and got an error when booting... it paused in mid boot, then started searching for a boot disk in the DVD drive. I looked at the BIOS and the SSD is listed as 1st (port0) on hard drive boot order and hard drive is 1st boot priority. I unplugged all 3 storage drives and it booted up without an issue
View 9 Replies View RelatedAdditional information might be required keeps popping up and keeps kicking me off the internet. I am using wireless connection. It keeps connection to the router but keeps kicking me back to the additional agreement page. I have had this problem at other locations too. I as using windows 7.
View 3 Replies View Related