7100 Will Not Shut Down, Or Reboot
Apr 24, 2009
Recently upgraded to 64bit. Seems i have a little problem with both 7077 and 7100. The PC wont shut down, or restart, it just hangs. Occasionally it will restart but not often. Ive tried everything such as Bios checking, unplugging external equipement.
Its not any software ive installed, it even does it during setup. Will come to a part of setup where it needs to restart and it hangs, i have to manually restart it for setup to continue.
I hope someone has a clue as to what may be doing it, as i thought it was a 7077 bug and it turns out its more likely my PC then anything else.
View 6 Replies
ADVERTISEMENT
Nov 27, 2009
Any time I scroll throght a Pdf file.. The system freezes.. then thr dreaded BSOD.
Thus far the codes have been varied from BC d1 BC 50, etc..
View 8 Replies
View Related
Oct 15, 2011
last night i was just minding my own business watching Internet videos, until my computer just randomly restart. the tower was still fully powered but the operating system restart, and now i can't boot up windows! every time i try to boot it up i get a black screen with a flashing _ at the top and it just stays there, i've tried booting up in safe mode but that doesn't work! i put good money into this computer and there's allot of important files on it for my school work on it, i'm using a friend's laptop until then.
View 7 Replies
View Related
Jul 29, 2012
I ran the lastest Windows updates on my PC and when it rebooted it was stuck on the "Configuring Windows do Not Shut Down" screen for hours. Finally, I shut down and the PC would not start up. I tried to do a system restore to before the Windows update, and got errors. However, the PC did start up (and actually said the restore worked), but not everything is functioning correctly on the PC (there is no HDMI sound for example and Google Chrome Updater will not connect to the internet). I tried to do another system restore from within Windows and got the error message in the attached screen shot.
View 2 Replies
View Related
Jun 12, 2012
My sisters computer is showing a screen that says windows resume loader and i cant move the arow keys to highlight my choice
View 1 Replies
View Related
May 18, 2009
I am having lots of small problems after upgrading from 7100 to 7127. I am using x64 and since the time I have upgraded, the whole machine has become extremely slow.
Earlier it used to be extremely quick in bootup and shutdown etc. Now it takes almost double the time to startup and shutdown. I am using a 256GB SSD and it is making a major difference in speed now.
I am planning to do a fresh install of 7127 x64 but any ideas guys?
View 4 Replies
View Related
May 18, 2009
I'm getting random freezes that require me to restart my computer and I'm not sure what's wrong. The OS installed fine with no missing drivers (aside from my wireless network card and my LAN drivers which still doesn't work: Realtek RTL8168B). At first I thought I had bad video drivers as I've experienced this before with Vista but the problem persisted even after updating to the lastest Windows 7 beta drivers from ATI.
It's strange because the system rarely froze during normal usage but the OS freezes immediately when I play any internet based games (Left4dead + COD4) or use any 3rd party program that requires bandwidth (utorrent + IRC).
I suspect the culprit now to be the wireless drivers but what doesn't make any sense is that I've had no issue at all with web browsing. Internet surfing and IM-based programs (Digsby) work fine. The wireless drivers work as expected.
Other things I've done:
Vista32 Home = stable.
Memtest86+ passed without errors.
All drivers current (Windows 7 betas if possible if not Vista64).
Ran programs that caused immediate freezing in compatibility mode (Vista SP1).
Power Options: Display off @ 30 minutes; Sleep @ 2 hours.
Turned off Media Player Network Sharing services (read it could be an issue)
View 5 Replies
View Related
Apr 24, 2009
Build 7100 will allow upgrades after all but from build 7077 up only. Without having to edit install routine.
View 9 Replies
View Related
Apr 26, 2009
Possible error here in Windows Explorer (build 7100 X-64)
Expanding Computer in the window on the left doesn't show the 2 installed CD / DVD devices but only the "Virtual Device" created by UltraISO.
Double clicking on the computer shows all the devices as shown in image 2.
UltraISO or Windows prob? Not a real "Show stopper" but I would like the system to be correct.
View 1 Replies
View Related
Jun 10, 2009
I've got windows 7 V7100 running on my dell D600 and when i attempt to upgrade it to 7201 x86 it fails saying it can find winload.exe.
i have my drive setup like this
100mb windows parition. ( from the orginal 7100 install on a blank hdd)
58G OS drive where Windows 7 is installed ( 7100)
239G Apps Parition ( labeled F & Installed as mounted volume as media)
from what i gathered the upgrade tries to use F: as the setup from the upgrade ( i have tried via USB & just extracting it to C:Windows 7 or F:Windows 7 - it asks the same Question ) and if i edit the BCD with EasyBCD the upgrade seems to point to F:
Should i just remove the 100Mb and 58G partitions and reload in one parition ? ie fresh install and leave the upgrade alone.... ?
View 4 Replies
View Related
Oct 22, 2009
I have read I can use Windows 7 Home Prem Upgrade to UPGRADE my RC7100.
I have read I can't use Windows 7 Home Prem Upgrade to UPGRADE my RC7100 and that I have to have RC7600 but I thought was a RTM build?
I am confused. Do I buy an UPGRADE or a RETAIL???
I'd really like one simple answer PLEASE to one simple question...CAN I BUY and use an UPGRADE H/Prem Windows 7 to do an inplace UPGRADE of a legally downloaded and activated RC7100? I take it if YES, I have to put in the ISO disc I originally burned as "proof" of originally installed OS?
View 9 Replies
View Related
Dec 29, 2009
I bought my computer with Windows 7 RC. I want to get the full version of Windows 7 (Home), as the RC will expire soon I believe. How do I do this?
View 9 Replies
View Related
Apr 24, 2009
windows 7 7100 install error please help me
windows 7 7100 x86 boot dvd pc but install error message
a required cd/DVD drive device driver is missing if you have a driver floppy disk. CD, DVD, or usb flash drive please insert it now.
View 4 Replies
View Related
Apr 29, 2009
when i did an upgrade from 7077 to 7100, my grub menu's completely gone no more is it there. I know that partition's there it's just for some reason 7 decided to say oh no no more will you have the option to boot to linux probably a plan by M$ to screw over people who jsut want to do an "upgrade" into doing more work but oh well. So what's the plan now? Do i have to do a complete reinstall of ubuntu to get my grub back or is there a simpler fix?
View 2 Replies
View Related
Apr 24, 2009
i had the latest version of SuperAntiSpyware running fine on 7000. i just installed it on 7100, and as soon as i hit OK to select English as the primary language, i get a BSOD.
View 6 Replies
View Related
Apr 26, 2009
I have a yellow bar on the action center indicating that AVG is no longer reporting to Windows in a format that is accepted...
anyone else see this?
View 6 Replies
View Related
Apr 3, 2012
i want HP 7100 Drivers which supported to windows 7
View 1 Replies
View Related
May 10, 2009
I'm running 7068 64 bit and have tried upgrading to 7100 RC 64 bit but it won't let me, it tells me this version is not upgadeable? Anyone got any suggestions or am i going to have to instal a fresh copy from scratch?
View 2 Replies
View Related
Jun 3, 2009
I have not had much experience troubleshooting errors like this. I have several recent dump files that have been analyzed via the windbg tool I saw referenced in a different thread. I get bluescreens usually about once a day, sometimes twice a day. It doesn't really matter what I'm doing. I can be surfing the net talking on ventrilo.
I can be poking around checking out Windows 7 features. I can be playing an online game. I can even be asleep and when I wake up, it's there. I assume it's some kind of driver related issue but when looking over the dump files, I'm really not sure what I should be looking for. Hopefully there is someone out there that can share their wealth of knowledge.
I run a Core2Duo E6600, 4 gigs of Patriot DDR2, an Asus P5N32-E SLI Motherboard, an EVGA 8800GTS 640mb video card, and 3 Seagate drives.
I initially thought the problem could be sound related. So I installed the latest Vista drivers for my onboard sound device courtesy of the Asus website. A friend had suggested that the Windows 7 Nvidia display drivers could be the culprit. So I am currently running 64bit Vista Nvidia drivers. However my system has crashed after each attempt at fixing it. I ran a memory diagnostic through Windows. I walked away while it was doing it and when I came back it had booted into Windows and nothing was stated one way or the other.
For the record it seemed fine during the first pass so I walked away thinking it would report something when it was done. For the most part I've just rebooted and kinda chalked it up to it being RC and maybe I needed to wait for Windows 7 specific drivers in order to address whatever issue I was having. But as time went on, I've come to the conclusion that I should try to address this issue as it may not be something that simply goes away come final release.
View 9 Replies
View Related
Sep 7, 2009
This a totally random occurance, yesterday i was using my desktop fine as i have been doing for the last 6 months with this build, this morning i switched it on and its stuck on the flashing windows logo, i don't mind re-installing windows but i need to get the data off it and i can't be bothered take out the hard drives and moving the data somewhere else! please give me a clue because there is no reason why it should have done this randomly!
i'm wondering if it could be because its an old beta microsoft have decided to stop it from working?
View 4 Replies
View Related
Sep 13, 2009
i instaled the rc1 2 weeks ago anfd everyting sems to be fine until today. i had 2 blue screen.
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7100.2.0.0.256.1
Locale ID:1048
Additional information about the problem:
BCCode:d1
BCP1:0000000000000000
BCP2:0000000000000002
BCP3:0000000000000008
BCP4:0000000000000000
OS Version:6_1_7100
Service Pack:0_0
Product:256_1
Files that help describe the problem: C:WindowsMinidump
View 6 Replies
View Related
May 24, 2009
Anyway, this is my issue. Whenever I turn on my monitor, I find my resolution gets changed to 1280x1024 instead of my native 1440x900. This happened with the latest nVidia driver, the older nVidia drivers, and the built-in Microsoft driver. I couldn't get my native resolution back unless I rebooted the machine entirely.
This bug has gotten under my skin to the point where I went back to using Vista, which I didn't want since despite that issue, Windows 7 was a treat to use. Does anybody know why this keeps happening? My video card is an eVGA GeForce 9800GTX+ and my monitor is a Gateway 19 inch FPD1975WH if that helps.
View 5 Replies
View Related
May 2, 2009
I just installed Windows 7 on my Sony VGN-BZ560. I have a very strange error. After a certain period of time and programs (which seems to be random) the window borders will disappear and it will become a strange blue.
This is a stock install using the Intel 45 Graphics driver in the RC build. Anyone know any solutions? I've googled but come up pretty empty.
View 9 Replies
View Related
Jun 6, 2009
just wondering how I should upgrade from Build 7100 to 7201?
And what exactly is the difference?
View 9 Replies
View Related
Jul 6, 2009
after installing windows 7 rc on my laptop i decided to try and install it on my desktop pc running windows vista home premium 32-bit
when installing it on one user account i get the error message "D:SourcesInput.dll is either not designed to run on windows or it contains an error. try installing the program again using the original installation media or contact your system administrator or the software vendor for suuport."
then i pess "ok" and another errore message comes up:
"Windows could not load required file WinSetup.dll. The file may be corrupt to install windows, restart the installation. Error code: 0xC1.
Wheni try to install it on a different user account i receive anither error message
"Windows was unable to create a required installation folder. error code: 0x80070017"
View 1 Replies
View Related
Jul 7, 2009
I want to upgrade my w.7 from build 7100 to 7264 but I have photoshop and other programs installed on build 7100 and I want to know if these program will still work without any problems after upgrading.
View 5 Replies
View Related
Jul 12, 2009
My upgrade from 7100 to 7264 failed. I had the same problem when upgrading to 7100 and had to reformat my drive. Here's the problem: at some point when transfering files and system settings (2nd step I believe) the C drive becomes currupted somehow. The OS still runs and boots, but the drive shows up as "access denied." The sizes under properties are all 0.
I'm using the computer to post this so it still runs, but the drive is desperately crippled. I think the partition table is messed up somehow.
Any ideas?
View 1 Replies
View Related
Aug 12, 2009
I have Vista x64 right now and I keep wanting to install the 7100 build beta that I downloaded a while back. I plan to buy the 3 pack of Windows 7 when it comes out but I am wondering if installing the beta build now will make upgrading harder down the road. Doing a clean install is just way to hard considering all the terrabytes of programs and data that I would have to either re-install or manually try to put back into it's original places.
I know a lot of people preach that doing clean installs is so much better. In my experience this has never really helped. I have on numerous occasions done clean installs and they never did seem to work any better or any faster than the upgrades that I have had installed for years. The only time I think you need to do a clean install is if you have stability issues with your hardware causing your OS to go flaky or if you neglect your OS and leave all kinds of crap floating around on it. We have one machine running Windows 2000 since 2000 and it is used daily without any problems or corruption whatsoever.
View 2 Replies
View Related
Sep 20, 2009
I'm currently running Win 7 Build 7100. I plan on purchasing Home Premium. My computer was originally running Vista Basic. I did a clean install of the beta (no partition, Vista is gone). Can I purchase the upgrade copy or do I need to purchase the copy for new computers? Will I need to put Vista Basic back on my computer if I want to use an upgrade copy? If I can upgrade directly from the beta, is it best to do a clean install? I'm a little confused as to how this process is going to work.
View 9 Replies
View Related
Oct 23, 2009
I don't post often, but I do read a lot, and there is a lot of good info here. Background: I am running a dual boot Win XP (32 bit) and Win 7 RC 7100 (32 bit). I have the Digital River WIN Pro Upgrade (32 bit). I have read the UNAWAVE downgrade scenario from Ultimate to Pro and the WIN XP to WIN 7 PRO upgrade here.
I am debating which OS to change. I really like the RC version and have been using it for quite a while. But since it is my main OS, I would hate to screw it up doing the downgrade as suggested by UNAWAVE.
If I upgrade the WIN XP OS, I am not sure If I would still be able to dual boot between WIN 7 RC and WIN 7 Pro.
If I do upgrade XP to PRO, would I be able to use WET to transfer my settings from RC to PRO. I am leaning towards the downgrade option, but wanted some more input from the "experts".
View 6 Replies
View Related
Dec 22, 2009
I have a sony vaio which originally came with windows vista but my recovery disk is buggered! I installed windows 7 when I was sent a link from MS and I have been told about an offer to upgrade as I'm a student so I can get it pretty cheap.
Can I upgrade from my current windows 7 (evaluation) to Windows 7 premium or do I need to have vista or XP installed before I can do so.
I would like to do a clean install I want to start out fresh.
View 8 Replies
View Related
