I recently installed Windows 7 32 bit. I have a 64bit compliant asrock motherboard and intel cpu. This motherboard supports up to 4gb of ram, which I have. I do want to install 64bit but I'm not sure if it would be worth it. I say so because I was reading on this forum yesterday about 4gb motherboards not being able to address all 4gb of ram even on 64bit.
View 9 RepliesI have a Western Digital 1 TB USB 2.0 that I have connected to a computer that has Gigabyte connection to my NAS which can handle Gigabyte speeds.I am only getting 30.1MB/s.Is there any settings I can do to windows so that it can send faster?
View 1 Replies View RelatedI have vga driver for win xp, but it doesn't work on win 7. My motherboard is Gigabyte GA-8SIMLH. What can i do now ?
View 2 Replies View RelatedRecently bought Gigabyte GTS 450 Graphics Card. 90% of the time, I can get to the Windows login screen, but when it tries to go to the desktop, the screen goes black, my Graphics Card fans speed up until they sound like jet engines and I have to hit the reset button to get any signal. Sometimes I don't even make it that far. The funny thing is, occasionally, I will make it through to the desktop with the "Display driver stopped responding and has recovered" message, but I will get it again if I try to open Firefox. If I make it that far, I am usually stable until my computer is reset, or use any gaming software. It's been like this no matter what driver I use, the packaged driver, 275.33, or the latest 280.26. Gigabyte techs have told me to just try different drivers or send it in.. they've been absolutely worthless!
View 3 Replies View Relatedi'm having trouble installing the latest catalyst drivers.the package fails and keeps knocking me back with the INF file was not find.ive installed the package to a folder and tried to navigate via system and update the driver file but get an error regarding the information set or element settings (and the driver doesn't update.my graphics card is still working so to speak, i can enter games although my system crashed 2 hrs ago from dxgmm1.sys and thats what prompted me to uninstall and reinstall my drivers but im running into alot of problems.i've also tried reinstalling through safe mode and still not working (ive used driver sweeper to make sure it's a fresh install)
View 4 Replies View RelatedMy Gigabyte GN-WP01GS stopped working after upgrade from Vista 64 to Windows7 64.From another PC I went into Gigabytes website, this one: url...downloaded the latest driver for Vista 64 onto a USB-stick. Unpacked the file on the USB-stick. Installed on my Win7(64) PC. Accepted update. The network icon now indicated networks available. Selected my network. Now i works!
View 2 Replies View RelatedI want to ask someone please where can i download drivers for gigabyte 8ig1000mk for win 7 thanx in advance
View 1 Replies View Relateddoes gigabyte Maynord model GA-8IEX supports Windows 7 or not?
View 2 Replies View RelatedI started everything up and entered my new OS disk,thenit says 'loading operating system...' for not even a second then goes on to say'system boot failure, insert system disk and press enter' I re enter the disk but then it says 'disk boot failure, insert system disk and press enter'. I don't know what to do, I've gone into BIOS and but the cdrom as the first boot device also but nothing seems to work.. everything is brand new and my motherboard is GA-970A-UD3 AMD type
View 4 Replies View Relatedi installed windows7 on my AMD anthelon and i am using s-series m61pme-s2 gigabyte motherboard. mydisplay driver and sound drivers do not support windows7.
View 2 Replies View RelatedI don't have windows 8 drivers for my system,which is having Gigabyte G31 motherboard download drivers for it.
View 2 Replies View Relateddrivers 945GSM-S2rev.3.9
View 2 Replies View RelatedI just installed a new mobo, cpu, and ram. After I finished installing all the peripherals I booted up my system. Everything is going great until i get to the windows 7 loading screen. As soon as the window's logo appears it BSODs and restarts. I have windows 7 x64. I used another HD with Vista x32 and it worked perfectly. Another potential problem is my USB mouse isn't functioning but i suppose that is because I don't have the drivers or something similar to that.
mobo - gigabyte GA-P55-UD3 Rev. 2.0
cpu - Intel i7-870
RAM - Kingston hyperx ddr3 1600 2 x 4gb
Just did a fresh install of Windows 7 Ultimate 64bit. Trying to install the motherboard chipset but got confused with these options. Which one do I install? Asetup or Setup? Motherboard is Gigabyte 880-GMA U2DH rev2.1
View 5 Replies View RelatedI have a GA B75M D3V (bios version F9), paired with Intel Core i5 3550 (Ivy Bridge), 2 x 4 GB Patriot Extreme DDR3 PC1600.Installed Windows 7 x64 Ultimate SP1 on it.Strange problem is, after using my computer for some time, perhaps an hour,or more, randomly, I can't completely shutdown my PC.After clicking shutdown on start menu, my PC react normal.But, after a while, the PC (case and everything inside it) like in stall state.and the monitor goes blank (no signal from the PC). So I have to press power button for 4 seconds to completely shut it down.
View 2 Replies View RelatedI updated the bios to the latest version on a gigabyte GA-Z68X-UD3H-B3, using @bios application in windows. I have two disks in a RAID1 All was working fine but upon boot i was getting a message about enabling ACHI. Stupidly curiousity got the better of me and I eventually I said Yes. The next time i turned off i couldn't boot to windows. I went into the bios and noticed that the SATA was set to ACHI, but the bios still saw my RAID volume set up and everything appeared Normal, so i changed this setting to RAID.
it still wouldn't boot to windows - giving some message about not having access to the drive. i tried using the windows install disk but that gives error messages about RECENV utility not working, use chkdsk. it does show a drive as a volume D: (not C: interestingly) I have tried running repair and that doesn't work. I have tried chkdsk/r and that didn't help. In fact that degraded the Raid so i had to rebuild it, and now that is running Normal.
I also can't see any of my restores when i use the install disk.
I don't want to do a reformat and start again as there is data on there that is newer than my last backup.
So the options i am considering
1. remove the disks - place one of them in an external usb case and try to extract the data to save it - not sure if this is possible? and then do a clean install or try the below.
2. can i go back to the previous bios version? is that just a case of power off everything and remove the CMOS battery? and power back on?
3. go through with a new install of win 7 but don't format the drive and see if it just corrects any bad files.
I'm using a GA z77x-UD5H and it has its own UEFI dualBios. I am using an external dvd drive to try and install windows 7 because I just built this pc. I have nothing on my HDD yet. All I am trying to do is figure out how to boot using the DVD drive to install windows.
View 5 Replies View RelatedI have just bought two brand new WD 500 GB RE4 HDD's and connected them coorectly for RAID 1. I have changed the BIOS and Pressed Ctrl+F to create the RAID and this has been successful. When installing Windows you obviously get to the aprt where you need to load the floppy drivers to locate the drives...
I have downloaded ever driver from the Gigabyte support drive and loaded them onto a USB, not one driver can be seen when the USB is "Browsed" too...
How important is it that the drivers are on a floppy, as I do not have a floppy drive or access to a floppy and drives. Also what driver should be downloading as I tried the 3.2.1540.17 one and that was not seen, so I just downloaded them all in an attempt for success.
Do you know how many hex bytes for 1GB? Are there any online convertor for that?
View 4 Replies View Relatedmy computer turns on then off over and over what does that mean gigabyte gah55mud2h I5 2.66 gig what can i check i know how to build my own comp. i installed a new chip because i was told by geek squad but it is stil tuening on for a second then off then on over and over what should i do?
View 12 Replies View RelatedOk I have installed windows 7 I have installed the Nvidia drivers through auto update is this ok or shouold I have done it another way? Also I need the chipset drivers for this board. GIGABYTE - Product - Motherboard - Overview - GA-965P-DQ6 (rev. 1.0)
I have tried the Vista ones but it says opearting system not supported. Can you please advise me where I can get the chipset drivers for windows 7? Also any one found windows 7 Creative drivers for the Extreme gamer edtion? I can only find the Vista drivers but will these still work ok?
I have been running win 7 for about 6 mths now dual boot with xp. I have done a fresh install and got rid of xp and running win 7 straight up. My system is a Gigabyte AM2+ with a phenomII black edition 4 core., 4gb ram onboard video.
Now for the question. i got thinking today and realized i hadnt installed any chipset drivers etc. I look in device manager and all the drivers are from microsoft and from 2006 ? So i go to gigabyte and get the win 7 download but all it installs is the graphic driver and usb filter driver nothing else. I try driver max and it says my drivers are up to date. What am i missing here.
I have a nice new Gigabyte X79-UP4 motherboard, and it is behaving for the most part, however the USB3 ports are not working. Drivers for the port installed fine (from the disk that came with the motherboard) however it is not recognizing either USB3 or USB2 peripherals.
Device Manager reports that the USB3 ports are fine -
I did download the newest Fresco Logic drivers from Gigabyte and the package failed on install with the message below -
Even though the installer failed I was able to go through Device Manager & update the drivers, but unfortunately there has been no improvement in functionality - USB3 and USB2 still do not work.
I have tried several installer packages, from different locations, and all have failed!
i'm new user of windows 7 ultimate and i have this graphics card
Gigabyte 4650 GVR465OC-1GI 1GB (PCI Express) can anyone please help me and give me a link for windows 7 drivers for this card?
problem I'm having is that the on-board audio will not install regardless of what I do, let windows solve the issue, install the (apparently) compatible driver from the Gigabyte website via it's exe or manually from the same source.
I'm a little short on time at the moment so if any more info is required (system or other) please ask but I'm at a loss as to what to do. Despite oodles of googling If I can't find a solution I will just buy a new soundcard but this is a last resort.
I have been trying to install Windows 7 x64 Ultimate on a Gigabyte GA-P35-DS3 (rev 2.0)
and everytime i do the install fails and the install is then rolled back.
I currently have Vista x32 installed on Gigabyte Raid 0 (there's also an intel raid option but i've never used it). The Vista install runs fine and i've never had a problem.
When i try to install using the GA-P35-DS3 (rev 2.0) raid drivers from the Gigabytes site i get the usual microsoft grumbles about unsigned drivers but then the install seems to go OK from there until the install completes and reboots. At this point it errors out and reboots into the OS rollback install.
Does anyone know if this is an issue with this driver or does anyone have a link to another driver?
Been troubleshooting a desktop we built for video editing at the office for a while, running out of ideas so I thought I'd post here to bounce some thoughts around.The issues is the desktop will randomly BSOD or just black screen with no response, at random times doing random tasks. It is running Windows 7 64bit.
The hardware is a Gigabyte p67-UD3-B3 motherboard with an Intel i7 and 8GB (dual channel,2x2GB) Corsair DDR3 memory(TW34G1333C9A).I believe this to be a memory issue, as I have tested and reinstalled my drivers already.Also,I do not experience the issues when I remove one channel of 4GB of memory.It does not matter which channel,or which sticks are removed.I have used MemTest and received no memory errors. I think the issue is possibly being cause by memory compatibility or memory bios settings.
The memory uses XMP to auto set all the settings in the bios. It appears that the settings are as they should be. Frequency at 1333, volatage 1.5v.Corsair's website lists this ram as compatible with this motherboard. Gigabytes website does not list this memory on their compatibility list, but the 1600 version is.Any input on what I can change in the bios to continue troubleshooting? As I said, when I am running 4GB of ram everything appears to be functioning properly, but when I add another channel of 4GB I start seeing the errors.
How well is gigabyte 720 superv PSU performance? I found it very cheap than other psu brand.Do u have any experience of gigabyte psu.
View 6 Replies View Relatedam after a Tutorial for overclocking my Gigabyte GA-Z77X-D3H.
View 2 Replies View RelatedWhen it is plugged in, it shows it is charging but remains at 0% availability.
View 1 Replies View Relatedgetting Gigabyte g31 motherboard drivers
View 1 Replies View Related