I just bought a new gateway with Win7 and a 2 TB harddrive. I wanted to partition the drive. I was following directions on how to shrink the C drive. I right clicked on the C drive in disk management and selected shrink volume. Then I clicked SHRINK without entering anything. I'm not sure if anything changed or not. I would like to get the C drive back like it was with 2 TB.
View 5 RepliesAlthough there isn't an interface specficially designed for it, you can actually view the progress of a volume shrink operation in Windows 7, and cancel a shrink that is in-progress, using the Disk Defragmenter tool.Volume shrink can take a long time, especially if you have a very full, or fragmented hard drive. Being able to view the shrink progress can be pretty handy!
View 1 Replies View Relatedwhy does shrink volume only display 350gb available to shrink out of a total of 703 gb on (C drive? the Hewlett Packard is fresh out of the box. it was partitioned with 200MB system files, the 703GB partition contains 25GB of files, 150MB partition unallocated. a (D drive HP created for emergency (nice feature). any suggestions on what to do with 150MB since it is so small (mb). windows 7.
View 8 Replies View RelatedMy C drive is full and started to make computer run lil bit slow.my question is if i shrink my d drive which has about 70g free can i just extend the c drive to take the un-partitioned space? I dont see why not but seen as i was on here i said id ask, i dont want to have a small usless volume if i can not add it to the c drive.
also it is 1024mb in a gig init?? im goin to add 50g to my c drive which would be 51200mb!
i've got dell xps 15 having 500gb harddrive,i wat to shrink my c drive for partition but it shows error n says run chkdsk which i tried but got unsuccess
View 1 Replies View RelatedI have created new hard drive by shrinking but after shrinking my C drive isoccupying near around 150 though it is using only 40 GB so i want to allocate only 70 GB and rest for a new drive.and one more thing after shrinking my all hard drive became dynamic simple volume previously it was Basic volume. will I face any problem for that?
View 3 Replies View RelatedWhen I go to the normal shrink partition in my Windows 7, it won't allow me to do it. What do I need to do to get my pc to allow me to shrink the C; in order to allow large Drive partition/
View 4 Replies View RelatedI just purchased a new HP Pavillion with a 1.5 Tb drive. I want to shrink the C:drive down to about 100Gb, and create other drive letters, with roughly 500Gb, 500Gb and 400Gb.I went into Disk Management and began the process by attempting to shrink the C: drive, but the smallest it would let me shrink it was 651Gb. I got a message saying that unmovable system files prevented it from shrinking any more.I tried defragging, but that didn't get me any more shrink.Then I tried disabling the paging file and defragging again, but that didn't gain me any more shrink.CallThey said this was outside the scope of their warranty.
View 3 Replies View RelatedI have a 300gb harddrive that i shrank by 50gb to make room for a windows 7 rc1 32 bit dual boot. I now need to extend the partition because i have almost filled it up. When i shrink the main partition (the 238gb one) that has vista on it, it won't let me extend the windows 7 partition onto it.
This is what it looks like in diskmgmt.msc
Vista (188gb)/Unallocated space (~50gb)/Windows (50gb)/HP_RECPVERY (9.91gb)
i have hp dv6 ,my C drive size is 450 gb and 205 gb is free ,yet i able to shrink only 9 mb .
View 2 Replies View RelatedI deleted all shadow copies, first via Disk Cleanup and then via vssadmin, all per your instructions. It didn't help. I then went in and disabled System protection. It didn't help either.Disk manager still says I only have 462756 MB shrink space out of a total of 953867 MB (NTFS), leaving 491111 MB after shrinkage. That's not enough - I need to shrink the C volume to 96 GB, because I want to move to my empty RAID SSD (2 disks/mirror) with 107.13 GB (NTFS). I assume the reason I cannot use Seagate's disk utility to execute the move is that it cannot move from a larger partition to a smaller, but it hasn't actually told me that - it just doesn't follow instructions.)
View 1 Replies View RelatedI tried looking around on the net and here, but I wasn't able to find what I was looking for.
I want to put in a dvd and have dvdshrink lunch automatically. Anyone have ideas?
I have 320GB hard-disk out of which 144GB is free but when I try to shrink it to create a new volume, the maximum amount I can enter is somewhere around 4GB.
View 4 Replies View Relatedhow to shrink Windows 7 iso, like remove the other editions.
I made a windows 7 AiO disc, which has all the editions, 32bit and 64bit but I want make a special iso, that only has 32bit and 64bit of Ultimate,
I have been using DVD Shrink 3.2 with Win XP for years to make backups and archive my valuable DVDs. I now have a new computer running Win 7 and DVD Shrink no longer seems to load properly or work correctly. I still need to be able to back up my own DVDs-what programs are available in Win 7 to do that?. I have just begun using the new computer and have not begun to exoplore all the features of Win 7
View 6 Replies View RelatedI don't fully understand how all this works yet, and I'm not sure if I can disable this and still expect it to run smoothly! Some places I looked said that with anything over 4gb of ram, I really wouldn't need it, but others said keep it for sure..
View 3 Replies View RelatedOkay, in your OWN personal option, which software would you get to do the following:1. Shink the image before writing.2. Make a recue disk.
View 9 Replies View RelatedMy os partition size is 222 GB. Free space in OS partition is 85 GB. I want to Move 80 GB free space of OS partition to second Partion(F:) to do this, I tried to Shrink the OS volume. But size of available space for shrinking is only 707 MB.But there is 85GB free space in my OS partion. why this occurs?
View 4 Replies View RelatedIs there any way to shrink one partition and add that space to another as I illustrated here
View 1 Replies View RelatedDVD Shrink (3.2) has stopped working...in fact it won't open. I'm using Windows 7 Ultimate and nero 7.
View 5 Replies View RelatedHow to Shrink a Partition or Volume in Windows 7 ?
View 0 Replies View RelatedI want to shrink my C drive. The volume shrink in disk management. It says that it is corrupt run chkdsk (something like that) SO I run the error checking and restart. Then it says error can fix error (some long thing with a billion numbers. Then it says run system recovery from control panel to back date the c drive to a before hand restore. So I go through that but right at then end the last button to push it says error on c drive first run error checking.
View 3 Replies View Relatedi using win 7 pro..but i cannot start De-fragment..so i cant shrink volume hd because this 2 thing are related...so what must do??? my restore point not work
View 3 Replies View RelatedI just installed a fresh new copy of Windows 7 Professional 64 bit to my newly bought free dos computer yesterday. Later I installed my motherboard drivers, monitor drivers and optical disk drivers. I also installed CC cleaner.
Now I am trying to partition my 500GB Hardisk. The C: drive is around 465GB so I want to reduce C: to 150GB (OS+Programs/Software) and make another D: drive which will have the rest 315GB (Personal files + games).
The problem now is there is a limit in the shrink volume amount. And this limit i quite big. It only lets me reduce the C: drive to 243GB. Here is the Screenshot:
I tried disabling Shadows Copy, Paging File, Hibernation and System Restore but its still the same. I also tried defragging using the default windows defragger but nothing worked.
I upgraded to Windows 7 from Vista and when the upgrade was complete my screen shrunk and has 2 inches of space on each side--Yikes. I opened my Lightroom 2.5 program and my pictures are really screwy looking. IS THERE A WAY TO EXPAND THE SCREEN TO FIT THE ENTIRE MONITOR---hope this isn't a stupid question, I searched long to try and figure this out.
View 2 Replies View RelatedStarted with a 500 gig hard drive, was able to shrink it to half. My goal is a partition size of 100 gb. The entire contents of drive is less than 50 gb. I did away with the page file so as not to cause a problem as a none move able file. No hyber.sys file either. So right now the size of the partition is about 238 gb, but when I try to shrink it further it tells me that it can only be shrank by 7 more megs.
View 3 Replies View RelatedI used Shrink Volume option in disk management and then create new volume of the un-partition volume,after that desktop restart and windows corrupt,I am installing windows 7 professional,after license agreement the 0xE0000100 error coming,i have tried to install XP also but could not install.
View 2 Replies View RelatedI've been trying for the past two days to re-install windows 7. It would work fine if I had more disk space available which is my problem. I have 74.5GB's available on my laptop, but unable to get more than 3GB clear at a time, and I need about 7GB's to reinstall my windows 7.When I try to shrink the partition, it tells me to run a chkdsk. I've ran chkdsk several times but it always stops at 9% and gives me an error.
View 5 Replies View RelatedI have a partition set at 237 GB. I have 161 GB of free space left and want to move more out of the partition. But it would not let me move more out. Is this a bug or something?
View 2 Replies View RelatedWindows Disk Management utility has provided Extend / Shrink volume support.I got to knowthat FSCTL_SHRINK_VOLUME ioctl is provided for supporting shrink volume feature.I am interested to know what support is provided by File system driver and otherstorage modules to achieve shrink volume feature.Actually Linux does not have support for online shrink volume. So interested to know what are the support provided by Windows storage stack.
View 2 Replies View RelatedI have just run PartedMagic on a new Windows 7 system to shrink C: in order to be able to create an E: (Data) partition. On rebooting, I get the following error message: Windows failed to start.
A recent hardware or software change might be the cause.
To fix the problem:
1. Insert your windows installation disk and restart your computer.
2. Choose your language settings, and click "Next."
3. Click "Repair your computer."
If you do not have this disk, contact your system administrator or computer manufacturer for assistance.
File: Windowssystem32winload.exe
Status: 0xc0000225
Info: The selected entry could not be loaded because the application is missing or corrupt.
As it is a new machine, it was supplied with no system disk and I don't have a Windows 7 Installation Disk to hand. I guess that either the boot sector has been corrupted, the partition table has been corrupted or most likely that the system partition has been moved slightly.
Incidentally, the system is an Acer Aspire 5742 According to PartedMagic, the partitions are now allocated as follows:
unallocated - Size = 1.00 MiB
/dev/sda1 - NTFS - PQSERVICE - Size = 15.00GiB - Used = 12.27GiB - Unused = 2.73 GiB
/dev/sda2 - NTFS - SYSTEM RESERVED - Size = 100 MiB - Used = 33.59 MiB - Unused = 66.41 MiB - boot
unallocated - Size = 7.84 MiB
/dev/sda3 - NTFS - Acer - Size = 488.27 GiB - Used = 27.17 GiB - Unused = 461.11 GiB
/dev/sda4 - unknown - Size = 92.79 GiB
I suspect that the unallocated 7.84 MiB is the cause of the problem and that PartedMagic realigned the "Acer" partition.
I imagine that PQSERVICE contains recovery data of some sort (like Acronis)?