[64-bit] Windows 7 Backup Failure

Sep 12, 2011

The external harddrive that I have been doing back-ups to with the Win 7 back-up utility has failed and no longer functions. I want to back-up to a different drive but Win Back-up seems to be fixated on the old drive that no longer exists (I pulled the USB cord).The "Mange space" link is greyed out and when I click on "Change Settings" I get notified that the operation failed due to an internal error (0x800800005 Server Execution Failed) I've checked and the Windows Update service is running, so why did it "fail"?

Win 7-64 Pro SP1
Intel i7-920
6GB

View 6 Replies


ADVERTISEMENT

Windows 7 Backup Failure?

May 8, 2012

i do a weekly scheduled backup it failed (code 0x81000019)this week. i freed up space try again fail. i check the event viewer and the only error even remotely related to VSS is "The VSS service is shutting down due to idle timeout."i re-tried multiple times (with my security software off and with it on) and checked and the VSS service was on and starting properlyi researched it on the net and ran "vssadmin list writers" (from an elveated command prompt of course)some of them listed time out error i reboot run it again and all have no error then try the backup and the same ones have time out errori'm currently running "sfc /scannow" because the research on the internet said that one of the causes could be corrupted driversmy backup drive is a usb HDD drive f:/ interesting event viewer logs for my backup drive"The shadow copies of volume F: were aborted because of an IO failure on volume F:."on top of this the drive won't recognize unless turned on after the boot is finished or off then on again once the desktop is displayed its the same regardless of what cable i use and check disk shows no errors on the drive(haven'tdone surface scan yet)i will post the results of sfc/scannowsystem informationwindows 7 ultimate 64bit8gb ddr3-1333 ram500gb sata internal hdd c:500gb usb external hdd f:athlon IIx2 3ghzmsi 1GB radeon hd 6670msi 880g-e45 motherboardlg sata internal dvd-rw drivesata controller in ahci mode

View 6 Replies View Related

Windows 7 32bit - How To Restore From Recent Backup After HDD Failure

Apr 19, 2012

Had a HDD failure - just replaced it and a clean install of W7 32 bit. I had been carrying out regular backups using Backup wizard and a have a recent backup set. How do I restore form that. Alternatively I have a separate backup of my documents etc. As a straight save. Would I be better to just drag them back onto new build and not bother with restore.

View 3 Replies View Related

Backup Failure; Bad Clusters

Nov 3, 2012

I was creating a system image backup last night and it failed because of bad clusters. Now i have 11 DVDs that were part of that backup. Do I have to start all over again?

View 2 Replies View Related

Backup Failure / Error 0x80070032

Aug 22, 2009

does anybody know what Windows 7 Backup Failure with Errmsg 0x80070032 means? I've searched the internet and saw various Vista posts mentioning services which are not enabled (Task Scheduler..)

However, this does not apply to Windows 7. What does it mean?

View 9 Replies View Related

SMART Failure Predicted On Hard Disk 0 - Backup Data

Jul 29, 2011

When I turn on my laptop it says:
"SMART Failure Predicted on Hard Disk 0: TOSHIBA MK3017GAS-(PM). WARNING: Immediately back-up your data and replace your hard disk drive. A failure may be imminent. Press F1 to Continue".
And then when I push F1 it just have a blank screen.

View 9 Replies View Related

"windows Detected A Hard Disk Failure Backup Immediately...."

Dec 1, 2011

i have this E627 model laptop and it has a problem "windows detected a hard disk failure backup immediately...."

View 1 Replies View Related

[BACKUP] Windows 7 Backup And Restore Utility?

Aug 23, 2012

When you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.

View 2 Replies View Related

Use Windows Backup To Backup To A Network Drive?

Nov 1, 2010

Is there a way to use Windows Backup to backup to a network drive?

View 6 Replies View Related

(windows Backup) Deleting Old Backup States?

May 8, 2011

I backup 100GB of data with Windows Backup and over the time where I do all my backups there is like only 30GB of data which changed from those 100GB and also new files were added. Now my external drive is full. When I now delete the very early backup, the first one where the 100GB of data was saved, will it delete then ALL those 100 GB, or will it just delete the previous versions of the files which were modified AFTER that time, which are in this case the 30GB I talked about? Because otherwhise I would then have in the end an uncomplete, messed up backup.

View 9 Replies View Related

Restoring A Backup From Windows Backup And Restore

Aug 8, 2009

I currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?

View 3 Replies View Related

Multiple Backup Jobs With Windows 7 Backup?

Dec 7, 2010

I'm using Win 7 Pro and want to schedule several backups to my NAS. With Win XP, I was able to schedule multiple backup jobs, which makes things easier since I have 116 GB of data. I like to backup my documents, email files, etc. every week, but my photos, MP3s, etc. don't change as frequently so once a month is fine for that. Not surprisingly, the media collection takes much longer to backup, which is another reason I try to separate it from my "regular" backup.Unfortunately, Win 7 backup only seems to allow one backup job to be scheduled, which seems awfully limited. Am I missing something? Are there other free backup utilities that would work better, or do I need to shell out some cash?

View 4 Replies View Related

Open Device Failure/ Open Driver Handle Failure Gigabyte?

Feb 14, 2012

i'm trying to install at bios and easy tune 6, but for some reason it comes up saying open driver failure, or open driver handle failure. what do i do?

View 2 Replies View Related

Open Device Failure / Open Driver Handle Failure Gigabyte?

Mar 9, 2012

"Open device failure/ open driver handle failure" message when installing gigabyte utilities. The install fails. Does anyone know what might be causing this message?

View 3 Replies View Related

Windows Backup Something Goes Wrong After Backup

Apr 13, 2012

Currently my PC is set just they way I like so I thought I'd do a backup, the idea being that should something go wrong then I can just use that backup (on DVD's) to do restore my PC to the 'now' settings.

View 3 Replies View Related

Windows 7 Backup Always Stops Around 50% When It Tries To Backup

Oct 19, 2011

Windows 7 Backup always stops around 58% when it tries to backup "Boot (C" What should I do?

Windows Sicherung bleibt stehen bei 58% bei Systemabbild von "Boot (C" wird erstellt.

View 2 Replies View Related

Created A Backup Image Using The Microsoft Backup Utility And Now Can't Restore?

Aug 9, 2011

I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"

View 5 Replies View Related

Backup Software That Splits Large Files For Incremental Backup

Dec 3, 2012

Any simple backup program that is capable of backing up large files incrementally by splitting the file and backing up only changed parts of the file? The files I'm talking about are files that get altered by appending stuff at the end of the file, e.g. log files or mailbox files, so it's generally possible to split a new version of the file at the exact point where the old version stopped, purely by file size.

Specifically, I want to back up Thunderbird and SeaMonkey mailboxes without having to create additional subfolders within those programs. I understand that if something had changed near the beginning of the file, then the whole file will have to be backed up, unless the backup program is capable of some very clever searching, but mostly the files will change only by having data appended to it.

View 5 Replies View Related

Which Backup Software To Backup Pictures/Documents/Videos

Apr 10, 2012

Which backup software to backup Pictures/Documents/Videos so that when you do a fresh install you don't loose anything.apart from your programs of course, just the documents backed up what do you use?

View 13 Replies View Related

Backup External Drive Seen By My Computer, But Not Backup & Restore

May 25, 2012

I'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.

View 7 Replies View Related

Backup Complete Computer - Create An Image Backup

Nov 22, 2008

How to Create a System Image Backup in Windows 7 ?

View 0 Replies View Related

Change Backup Location For Backup Manager?

Feb 20, 2012

Is there way I can change the location of the backup files location using the Win7 Backup Manager? Right now it just shows me the location for a USB port. I would like to use a Home Group Location.

View 2 Replies View Related

Windows Backup "The Backup Failed." Error

Feb 26, 2012

I have a Win7 64-bit system and have been successfully using Windows backup on an approximately monthly basis. I ran it before going to bed last night and woke up to a "The backup failed." when I tried to create a system image of both of my hard discs. The error is "Incorrect function. (0x80070001)". I found a workaround solution at Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003 and looked up and found a number of "junction points", most rooted at c:UsersDilipAppData - but the problem is that there is no such folder.

View 9 Replies View Related

Backup To External HD That Also Has Mac Backup On Same Drive?

Oct 21, 2011

I'm trying to backup Windows 7 to an external HD that currently is used to backup mac.eed to do to make this happen? I'm sure I'll have to format the ext HD then backup the mac using a different file format, but am unsure just what I'll have to do or how to do it.

View 4 Replies View Related

Backup Error - Backup Was Not Successful

Aug 3, 2009

Does anyone know what would cause the following backup error?

The backup was not successful. The error is: Windows Backup encountered a problem while determining additional locations of one of the users included in backup. (0x81000038).

View 6 Replies View Related

Windows 7 SP1 USB Failure

Sep 26, 2012

I connected a 7 port hub up to my laptop and now my USB ports are messed up.The 2 ports on the left side have sensing but no power out. The port on the right side has power out and sensing but anything plugged into it after plug-and-play has down its number is installed incorrectly, (has an error doesn't work). The computer is a new HP G7-1365dx laptop windows 7 Home premium.

View 5 Replies View Related

Windows 7 OCX Failure

Aug 7, 2012

I have a problem, when I try to run a certain program it has an error, that prjChameleon.ocx or one of its dependencies are missing.. So I downloaded prjChameleon.ocx and put it in my System32 folder, but still no luck, says it will not work.. Further studying I found out that I needed to register it.. So I went to Start>Run> regsvr32 C:WindowsSystem32prjChameleon.ocx

View 1 Replies View Related

How To Get A Windows 7 Oem After Hdd Failure

May 10, 2012

have a 14month old emachine notebook, with win 7 home ed pre installed, and the hdd failed. fitted new hdd but cannot access the os from the old hdd, and have no backup disks. how can i get a copy of the os. have the licence key

View 2 Replies View Related

Failure To Boot Into Windows?

Jul 20, 2011

making the computer recognise the system drive by using command prompt in recovery options windows 7 dvd. In the recovery options there is no operating system apparently but i know for a fact it is there as i had been on my windows 7 fine until i restarted the comp and then the problems started.

So how can i get windows to recognise where the system partition is.

View 3 Replies View Related

Failure To Configure Windows

May 17, 2012

I have the problem of failure to configure windows, i have seen a few posts on here about people solving this problem but i am a bit of a noob so was hoping i could get some 1 on 1 help.I was stuck in a loop for a while in that i would get to the failure to configure windows screen and it would either restart or would just stay on that screen for hours. i have now somehow got onto my laptop (don't ask me how! just luck i guess) but i was wondering if there was something i could do to stop it happening again. until that time i will be trying to leave my laptop turned on.

View 5 Replies View Related

Failure To Boot Up Windows 7?

May 28, 2012

my PC is refusing to start up. It happened yesterday after the power had flickered, I turned off my computer because the battery it was hooked up to was yelling at me (due to the power flicker). On the startup, my PC just hangs after "Verifying DMI Pool Data", and then gives me the "DISKBOOT FAILURE, PLEASE INSERT DISC AND PRESS ENTER" to continue shenanigans.

I've cleaned out my computer and have tried unplugging my two external hard-drives, as well as going into the BIOS and making sure the boot order was correct. When I insert a Windows boot disc, it refuses to 'repair' my system because it says there's no specified OS to repair... I thought the problem was that it wasn't recognizing my actual hard-drive, but that doesn't seem to be the case, (I forgot how I got to it but,) it recognized that I had 183/500 GB of space left (as well as being able to view certain files.

I recently was able to get into DOS, where it's listing my main drive as "X:windows\system32". Could this be the problem? If so, how did it reassign it to "X: and why did it do that?!

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved