'Failure To Display Security And Shut Down Options'
Jul 1, 2012
When gaming or even performing simple task, programs on my Windows 7 64-bit stop responding/freeze. Pressing CTRL+ALT+DELETE doesn't do anything and the system bogs down really slow, after which point the screen turns black with just the mouse cursor, and after a while this error message pops up: Failure to display security and shut down options.The logon process was unable to display security and logon options when CTRL+ALT+DELETE was pressed. If the operating system does not respond, press ESC or restart the computer by using the power switch.Oddly enough once I restart the issue is fine and can run smoothly for hours on end. Then out the blue it happens again... It's totally random.I just upgraded from XP Pro 64bit 3 days ago to Windows 7 64bit after my 5yr old HDD died and I replaced it with this.
So my laptop was working fine last night, woke up this morning and this issue appeared. I'm guessing it's a virus (stupidly, I haven't installed an AVP on this machine yet). Anyways, I can't open anything. Doesn't matter where I try to open the program or file from. The load icon appears but nothing happens. I also can't access the task manager or shut down/log off/etc. from the start menu, I get a "Failure to display security and shut down options" error msg. I'm in safe mode with networking right now, which is allowing me to open programs. I've already tried a system restore but it didn't solve the problem.
When performing more demanding tasks, which I try to avoid, programs on my Windows 7 32-bit stop responding/freeze, and pressing CTRL+SHIFT+ DELETE or CTRL+ALT+DELETE don't do anything until the system's had enough time to do whatever it's doing, after which point the screen turns black with just the mouse cursor, and, after a while, this error message pops up:Failure to display security and shut down options..The logon process was unable to display security and logon options when CTRL+ALT+DELETE was pressed. If the operating system does not respond, press ESC or restart the computer by using the power switch.[OK]I hit OK, and the system comes back, but it's clear it still has freezing/performance issues, because the whole thing soon repeats again. I've found that, to fix it, even restarting isn't satisfactory, because doing so won't help the computer "forget" that it was overworked, so, instead, I shut it down, for no less than 15 minutes, then start it up again, and it acts fresh again. Then I have to be careful not to overwork it again.But is there any way to help my Windows 7 take on those more straining processes? Googling "failure to display security and shut down options". [code]
Alright, I have a problem I'm not sure how this happened but when I tried to shut-down / restart my computer all the buttons were missing.. and in the start menu options where nothing is selectable I tried searching over the web trying the gpedit.msc and some registry hacks but still the same problem.
Problem description: While not occurring all of the time, it has become apparent that if my computer experiences a long period of activity, say if I am playing on it for a number of hours for example, the system will struggle to shut down. This means that once I click the button to shut down the system can sometimes take 5-10 minutes to finally shut down. At one instance the system hung up for so long that it caused a bluescreen of death, forcing me to just kill the power to the PC.Usually however the system shuts down in seconds like normal.Attempted fixes: What have you tried to do to resolve the problem?I examined the Event Viewer and learned that during each problem event where the computer would start to hang up, leading to the shut down problems, the program "Bonjour Services" is clearly defined in long strings of errors. Wanting to make sure that this program was responsible for the problem I waited for the issue to occur again and sure enough, each time the Bonjour Services was causing the issue.
know that this program comes with iTunes (which I use) but I simply uninstalled Bonjour since I don't use any of the specific functions it uses. Well it seems the problem has not simply been fixed by uninstalling Bonjour. I am still encountering the occasional stall upon shutdown, but this time the event viewer does not show any errors regarding it. I only uninstalled Bonjour through the Add/RemovePrograms in My Computer, is it possible that there are still parts of it screwing with my computer? It can't be a coincidence since Bonjour was clearly identified with each error in the event viewer for all of the previous shutdown issues
I'm using windows 7 and INTERNET explorer 8 when I get on the INTERNET and try to go to Hotmail a window comes up and says, "Security Warning - Do you want to view only the web page content that was delivered securely?" In the box that comes up it has more... "This web page contains content that will not be delivered using secure HTTPS connection, which could compromise the security of the entire page." Then it has three buttons to click on, "More Info", "Yes", "No" - This comes up time after time, page after page, didn't use to do this and I haven't downloaded any programs for security, or to use with/on the INTERNET.
I was trying to disable the 'Network Access: Do not allow storage of passwords and credentials for network authentication' since it was enabled which meant I couldn't save passwords. When I right clicked it and opened properties, the options of enabled and disabled were grayed out. Also, there is a padlock on the icon of the Security Settings tab and so does its subtabs. I am on an administrator account but it still doesn't allow me to change the settings.
Some files in my external drive has a lock symbol near them, some don't. Why is this happening?
I am using Microsoft Sync and recently I had to use "Run as Administrator" for it because some files were "access denied". (I am using the drive in different operating systems in different partitions).
Should I run Sync in administrator mode, or regular? How should I arrange the security for the drive? Should I add users or everyone? (now it is creator owner, system, administrators and me -I am administrator and only user-).
I got confused because before I didn't need to use the administrator mode for syncing and I don't want it to cause problems when syncing, not to miss any files.
(When I try to give myself -username-pc/username- full control, after that it still returns to not full control, no permissions for the drive are inherited )
I remember in earlier versions of windows I could put my computer to sleep and still have some functionality.. such as audio. How do I shut the display and still hear my audio? If I put the computer to sleep, the audio also shuts down.
The only way I could shut acer down was unpluging my computer. The moniter said "no something, I'm sorry but I forget. Is there a way with the keyboard to shut it down? I called my provider and they said it was a moniter or card problem, but it works good since i plugged it back in. I have window 7.
I've never experienced this message before. I have not had a virus or malware be detected in a year. This came up when I tried to close KVIRC, an IRC client program and turn off my laptop via the power button.Was this a glitch or something? I'm really hoping it isn't a virus. I haven't experienced any performance issues so..I should add the laptop appeared to freeze. I powered down, rebooted, and everything seemed to run normally.UPDATE: Microsoft security essentials picked something up with a full system scan. Not sure if the 3 viruses were related.
So this is the second time this has happened to me in the past few weeks. And the time before was when I was shutting down and exiting programs (I used my power button on my laptop)Last time I reported this I didn't get the information from the SF Diag tool properly, and being that I have the program up to date?
After I log in, within 15 min, the computer freezes and then says "reboot and select proper boot device". If I try to ctrl-alt-del, it will say "preparing security options"
i recently got a new hard drive in which the guy had to rewrite a partition on it. i updated all the drivers and for some reason i cannot install these two microsoft updates everytime i try it fails, and doesnt tell me why it fails, and when the hard drive and windows 7 was installed and it was working, all the memory on the local disk drive was taken up except for 200mb which is strange because it only had the OS installed and any windows essiantal programs.
about a year ago I had a problem with my pc where I would get the error message "display driver has stopped responding and has successfully recovered" and the occasional BSOD. I solved this problem by simply flashing my bios. However a similar problem has now arrived ( note I have not changed any hardware since the last error) where:
- There is a constant buzzing from my monitor ( NOT a problem with the monitor as it works fine in safe mode with no buzzing, which is why I suspect a gpu problem)
- I get random "display driver has stopped responding and has successfully recovered" messages, but no BSODs. OR the display just goes black and I have to hard reset my pc.
I am sure this has been answered in the past butI cannot find any links when I search!
I left my pc to boot up and it started into a check disc mode and all I get is the above message. I cannot reboot in safemode to restore, what can I do?
I recently purchased a lenovo laptop for home purpose around 1.5 months back. The laptop was having already microsoft security essentials (MSE) and mcafee antivirus plus software. Unfortunately, yesterday i was facing blue screen on death type of error (BSOD) error. On one forum, I found that it may be due to the mcafee antivirus software. So, I uninstalled the software as per suggestion.Why MSE was not able to detect this bsod error? Moreover, why mcafee, which itself is a anti-virus software, was causing this issue?
Morever, I want to install good free antivirus software. I am totally confused whether should I install the antivirus software or, the internet security software. Please throw more light on good free internet security software from longer perspective. (I just found that almost all free trials are only for 1 month only)? Moreover, why built-in windows firewall and microsoft security essentials (MSE) are not enough for detecting malacious software. Why extra internet security software or antivirus software is required ?
I recently bought a notebook PC, and was quite annoyed to find that Intel has magically removed the ability to change the Centrino N 130 wireless adapter's MAC address.Before the nutters get in here with accusations of "illegal" activity, I feel obligated to point out that there is nothing "illegal" about changing the MAC address on my own property. Briefly, I want to pose my notebook as a hypothetical attacker, trying to bump one of my other wireless devices off the router by assuming its MAC address. I don't really know what would happen if I did this, because, like I said, Intel artificially crippled the Centrino N 130 through its Windows 7 drivers. Rather paternalistic of them.Another benefit of the proposed experiment: showing the futility of MAC filtering in keeping out the "bad guys." I have been convinced of this for some time, but been simultaneously unable to demonstrate it to my own satisfaction. There is no substitute for actually trying something, rather than just reading about it.
I am also a little annoyed at the Centrino N's (lack of) performance. I have yet to have it connect at greater than 72 Mbit/s, even while sitting less than 10 feet from the router with a clear line of sight.FWIW, my router is a NetGear WNR3500v2. N wireless is enabled. As far as I know, this router is capable of supporting a full 300 Mbit or so 802.11n wireless connection, as long as the wireless NIC on the other end is doing its part (which mine doesn't).With all that in mind, can someone suggest an N-capable wireless NIC that is not purposely crippled by its manufacturer? I would prefer an internal mini-PCIe card, but Intel seem to be the only ones making those. Even a G-capable or USB device would probably serve the purpose, if that's all that's available.
i'm trying to install at bios and easy tune 6, but for some reason it comes up saying open driver failure, or open driver handle failure. what do i do?
"Open device failure/ open driver handle failure" message when installing gigabyte utilities. The install fails. Does anyone know what might be causing this message?
I Windows 7 Home Premium. My windows is getting the updates but when it says configuring windows it doesn't do it and says it failure to config and is reverting back.I also cannot turn on Windows Security Center.I appears something happened 8/15. I tried microsoft's fixes and system restore which hasn't fixed the problems.[CODE]
the display/monitor uses the generic driver for display and it is 1024×768 or 800x600 but it looks very odd it should be bigger because my screen is bigger. I have a acer monitor but is there something I can download to fix the display size?
Windows 7 64 turns off the monitor 1 signal after startup. At login, it powers off monitor 1 and powers on monitor 2. Windows 7 behaves as though dual display is working even though monitor 1 does not display. It's the same for single display, the monitor will not work on cable 1 except at startup.Both 'Extend these displays' in Windows Screen Resolution and 'Extend' in the Nvidia Control Panel is selected. And changing which one is primary does not turn on monitor 1. Nor does switching the position of display 1 in either (ex.left/right/top/bottom).GeForce 8400 GS; Dual Monitor Solution 59 pin (DMS-59) to 2 VGA adapter -tried two of these adapter cables.atest Driver: 306.23 - installed a clean reset install of the latest Nvidia driver released last week.Same Resolution: 2 of the 4 monitors I have tried have the exact same 'recommended' resolution (1280X 1024), both 60Hz, and even chose 16 bit color for both instead of 32 to reduce resources.
Linux worked: Dual display worked immediately when I tried it in Ubuntu 10. So, it's not the hardware. It works in Ubuntu 12 too but not properly -it won't transfer windows across displays. My Windows 7 64 is an upgrade from Vista 64. One person in another forum with the same problem resolved theirs by reinstalling Windows 7. But another got the same problem only after a fresh clean install of Windows 7 64 with the same GeForce 8400 GS and DMS-59 when it had previously worked in Vista. Dual Monitors - Only One Works at a Time
recently I've noticed that when I close my laptop that it won't go to sleep so when I went to change the "when lid closed" options in my power settings they wern't there. I also checked in the power button settings to the side.
After a recent crash, my boot up sequence now starts with a boot loader giving me the option of starting either of two windows 7 versions or doing a memory check. I don't want to go through this step. Is there any way to select a default version to run and forgo the boot loader options?
In this tutorial, we'll show you how to customize Windows Explorer and your folders even more by using the folder options window. You'll discover how to customize folder views and peek into the hidden files and folders on your PC.
