I'm trying to install the new win vista x64 os on to my new hard disk but during the installing ,it keep prompt me with this message " Windows is unable to find a system volume that meets its criteria for installation. " The hard disk i uses is Hitachi Deskstar HDS721616PLAT80 ATA/IDE drive
View 4 RepliesI installed Vista a while back, on a system pretty much formatted this way:
partition 1: linux
partition 2: XP
partition 3: linux swap
partition 4: extended {
partition 5: linux home
partition 6: linux usr
partition 7: Vista
This worked fine. Perfectly, in fact, and I was really pleased with how smooth the Vista install went. I noticed that Vista installed its bootloader on partition 2. Since I was going to trash XP at some point, I figured I would cross this bridge when I got to it. I got to that bridge last night. It was time to install a different flavour of linux, and trash XP. But nothing's ever easy... I reinstalled linux so that things look more like:.........
I had Vista Ultimate x64 installed on my machines, and wanted to install the x86. But, when I tried to install the x86 after deleting the x64 version, I now get an error that says that "Windows is unable to find a system volume that meets its criteria for installation." I have reformatted the drive and all else that I can think of, but, it it continues to throw the error message. What should I do? I am sure that my system and hardware is sufficient to handle the Vista install, and I am trying to install to the same drive that I had the other installed to: Processor 2.00 gigahertz AMD 64 Opteron's (2 installed)
View 9 Replies View RelatedMy Windows Vista Enterprise has a serious problem. It is unable to find, delete, or create any system restore points. I have not found a way to re-initialize the system restore point process.
View 4 Replies View RelatedThere are discussions on this general subject but no aparent resolution. About two months ago I was sometimes prevented from opening photo attachments on some emails received from the same party and sometimes could open them. By this I mean, I would click on the paperclip where a list of photos would appear and I'd click on on photo and I'd get a message saying: "Windows cannot find file name (photo captions used by sender).jpg. Make sure your typed the name correctly and then try again." Well, of course I didn't type the file name; the sender did. I could click on the save attachments, and once saved to a folder I could open them from the folder. I forwarded the mail to others, and they report no problems in viewing the photos. I can also view the photos in the email itself, but it would be necessary to scan up and down and from left to right to view the whold photo and the caption would not appear.
View 6 Replies View RelatedDon't seem to be able to find a group about windows 7 ? Is it under some other name?
View 9 Replies View RelatedRecently had a Computer problem and for no reasons I had been asked to reintall Norton AntiVirus. Then my com sorta had flashing digits and words during the restart. After it the sound menu sorta spoilt? Whenever i click on it, it just opens up and immediately closed.I tried accessing the control panel too, but it couldnt work.
View 5 Replies View RelatedThis was posted on Vista.general.discussion for a couple of days ago. I have an old system disk with XP which I moved to the E-drive when I installed Vista on a new disk. Everything of the OS on the old XP disk is deleted with the exception of this System Volume Information. I?ve taken the ownership and is now allowed to look into the folder. But no way of deleating it. No usable answer was given to the question other than moving my files to the C disk while formatting E. that might be the end solution. But does anybody know of a trick with or without editing the registry.
View 5 Replies View RelatedMy c: drive's volume gets unexpectedly decreasing even when i am not copying, downloading, or installing things.
View 4 Replies View RelatedI have a 198 GB HDD that has only ~3GB of space left. I cannot delete
any more data, i already did disk cleanup and deleted any non-critical
files. I did a disk analazyz and found that the system volume
information folder is taking up an enormous 89 GB of space that's almost
as large as the files I put on there (107GB). This is my server machine
(wndows server 2008) so there is not any system restore to reduce. Is
there anyway to safely reduce the space that this takes up.
A quick peak into the file tree shows that just one file takes up over
67 GB of space.
I'm also using Bitlocker on this and all drives.
I am running Vista Ultimate running under VMWare 2.0.2 on a MacPro 10.5.7. I had to recover my c: drive due to some VMWare corruption issues. We can now see the drive, but when I try to boot from it I get "Missing Operating System". If I boot from the Vista Ultimate CD to do a repair, it does not see the OS and so won't do a repair.
Running a command prompt chkdsk c: says "The type of the file system is RAW" and it fails. dir c: gtives "The volume does not contain a recognized file system". Diskpart list partition shows "Partition 1 Primary 40 GB 1024 KB". Filesystem shows "UDF Allocation Unit size 2048". I tried booting from the Norton SystemWorks CD for their disk utility, but evidently the CD is not bootable.
I noticed a big discrepancy between C drive used space and the files I actually have on C drive ex programs, windows , users etc. Those files add up to approx 32.5G. whereas the C drive info indicated that I haves used up around 67G out of 400G. I assume the rest must be Restore points etc. However when I click on properties of the System Vol Info folder I see 0 Bytes. When I use the command VSSadmin I see that 34.5G out of 55G is used.
Why can't I see the size of the System Volume Folder in Windows Explorer even though I am an administrator? Is there something I must do to give myself the appropriate privileges? I believe I should be able to view the size of the System Vol Info file because I can do so on my laptop which is also running Vista?
I'm using Vista Home Premium - I generally use Outlook 2007 for my e-mail and organising but recently went to Windows Mail to find a Newsgroup (unavailable in Outlook). However, no Newgroups were visible. Unable to find a way to find them I clicked on "Help" and the advice includes "Click the Tools menu, and then click Newsgroups." However, there is no "Newsgroups" option in the Tools menu that displays. The Windows Mail I have is version 6.0.6000....
View 9 Replies View RelatedIs there any way the user or Administrator can Delete System Volume Information contents in Vista? If so how?
View 4 Replies View Relatedthe Volume Icon was gone from my system tray. Does anybody know of a way to get it back?
View 6 Replies View RelatedI can't get them back either by checking them in the Start Menu Properties as they are both grayed-out or by rebooting. I still have network & internet access and sound. Vista Ultimate SP1 x86.
View 9 Replies View RelatedI'm sure this subject is beat to death, but I've been searching and cant find a thing, is registry defragging the same as registry cleaning, as far as effects of course. I know they perform different things but are they both harmful to the system?
View 9 Replies View RelatedI am looking for path of hosts file in vista x64. I found solution to get for 32bit apps to see the 64-bit tree, search now find hosts file and i see it and can edit it. But before these solution i was unable to find hosts file.
Monochrome Blog - Updating your hosts file in Vista 64-bit Where is this file hidden and how to find it. If i run Notepad as administrator and try to browse that cwindowssysnative directory i found noting. But TotalCommander find it and i can edit it and add that what i need. It just was weird.
I have -Dell XPS 730x with 6 GIG DDR3 RAM, Intel i7 64 bit Processor, 500 GIG disk,
I am running -Windows Vista Home Premium 64 which was preinstalled on the cpu
I want to -Dual boot between Vista64 and Windows XP32
So far -I have done everything to this machine from creating a virtual window in Vista64, to going into the command prompt from vista boot disk and running diskpart to clear hard drive.
I currently have -Two partitions on one disk. Primary 200GIG and Healthy 265GIG -Windows Vista Home Premium64 installed and running
The problems im having -every time try to boot from CD and run the windows xp setup, it is UNABLE to find ANY HARD DRIVES!
I have researched that
- I must have the disk partitioned
- Windows XP must be installed first
- I have to play with the boot.ini
- If i install vista32 it will be more successful
The errors I have gotten -STOP: 0x0000008E - i researched this and it said one option is to take out the excess RAM
I will be happy if - By the end of this weekend I can successfully run XP or both OS's in dual boot.
I need to go through all this trouble because - Digidesign has not written software for 64 bit proccessing yet. I need to make music.
running XP try to install 7 but get a error message unable to find partition error 0x80070490. i ran compatability which stated ok
View 9 Replies View RelatedMy laptop motherboard fried, so I removed the hard drive and purchased a caddy. When I plug the hard drive in to my new desktop PC I am able to see that only 4GB of the 100 GB capacity is available (as should be the case). However, I cannot see any of my files on there (folders I had created on the desktop etc.).
The only folders I can see are PerfLogs, Program Files, SwSetup, Users, Windows and two of my personal folders (both containing some photos). I really need to find the rest of my files as I have 12GBs of photos and videos of my baby boy on there, and would be gutted if I cannot access them again (for obvious reasons). Nothing else is important.
I must be missing something obvious... How do I do an XP style search? You remember, right-click a folder, click "Search", and have Vista search the selected folder? I've been unable to find this primitive operation. I'm willing to give up search control to Vista for local drives, but indexing our entire network, and each and every USB stick/USB Hard drive seems, well, silly for the once or twice a month I need to search in those locations. I'm willing to wait the thirty seconds it takes to search, because I can normally limit the size of the search ("Let me look through the code tree for December", for example).
View 9 Replies View RelatedNo sound: it's just not working, and whenever I try to change the volume from the taskbar, a window pops up saying "Volume Control Applet is not responding". Also when I right-click on the sound icon and go to 'playback devices' and then go to the recording tab, it freezes (the window) and says "Windows Shell Common dll is not responding. (I don't know if this is related but my iTunes isn't working, I double-click to listen but the little time bar at the top doesn't move at all, but the window does not freeze)
View 9 Replies View RelatedA friend of mine has Lenovo laptop that runs Vista Ultimate, the laptop itself is a little under a year old. Earlier this year, October-ish, she started her laptop to find the Cannot Find Operating System message. She took it to the tech department at the university we go too and they backed up all her info and had to reinstall Vista. We it has happened again. She said the recovery way didn't work and she had to reinstall Vista, this time losing all her pictures and everything.
What is causing this? I really want to make sure it doesn't happen a third time to her. I have read that some say it is the hard drive but I think if that was the case, she couldn't reinstall Vista or do anything to the laptop as the hard drive would be loose or fried.
Vista Home Premium 2. New system board and processor. Won't boot. An i7 950 and gigabyte board with high speed 1600 memory. Doing repair doesn't work. Reports something wron with system timings/speed etc. as well could be. Memory folks (OCR) ask me to run memtest400 (it passed all the vista diagnostics).
In install I go to command prompt and try to run mt400.exe. It says, "The system can not find the file." If I do dir e:mt400.exe it fins it just dandy. I tried copying it to a number of other places but get the same response. Even copied it to the loading directory under a number of folders. Now what? Is it impossible to run exe files in vista installer?
for find the drivers for Toshiba Satellite A215-S4697. i've checked at the toshiba site..but I cannot find it >.< i use windows Vista Ultimate 64 Bit..
View 4 Replies View RelatedI'm having some problem with my audio. I have 2 regular speakers. I just bought a new computer (Vista Home Premium installed) and using the same 2 speakers that I had on XP.
Default setting is at 2.1. (I understand that means you have 3 speakers but I only have 2) and there's no setting for "Stereo". And the problem is that the audio doesn't go higher than 50 and the volume is VERY low. I tried so many different forums and couldn't find any results.
My laptop is doing so weird and wild stuff, and I'd much rather take care of this problem myself (with the help of the internet, of course) than take it to a rotund egghead who will probably press three buttons, fix it completely, and charge me five hundred dollars. So here's the deal: First, when I was to click on, say, a Picture folder, the folder will load up but all the thumbnailed images of all my pictures will be the same stock Windows image. Like, I can't preview any of my pictures by looking at their thumbnails anymore. So that was a problem, and it's still a problem. Haven't fixed that one. Now recently, when I want to open a program, say Itunes or Firefox, instead of doing exactly that, it takes me to a Windows 'Open With' subscreen and asks me with WHICH program I'd like to open....the program I'd like to open. It's maddening.
My Macafee isn't opening any more. I just did a Dell System Update last night but it said it didn't find anything. I ran an Ad-Aware that didn't find anything. And to top it all off, for some reason my computer simply cannot check for new Windows Updates.I have no idea what's going on. Oh and if it matters my keyboard is all wonky. Not that that's an issue anybody here can help me with but I thought I'd mention it. My laptop is only a year or so old so I'm not sure why it's having all these issues. Oh and I don't know what kind of Vista I have. 32? 64? How do I find that out? heart and soul for any assistance anyone can give.
I have a Kodak CX7330. On my XP machine, I am able to select only those pictures that I want to transfer, I cannot find such an option on the Vista system.
View 4 Replies View RelatedWhatever happened to the file transfer program Alohabob? Microsoft bought the company a few years back and there were reports it was going to be integrated into Vista. I cannot find it anywhere on my Vista system. Was it ever implemented? If not, it certainly should have been. Anyone wishing to transfer files from a previous version of Windows would find it most useful.
View 4 Replies View RelatedWould this show up in restore point history or is there another way to find this info?
View 9 Replies View Related