Usb Device Automatically Disconnected
Aug 5, 2008
i have a problem with my usb ports, ok so like last week i got my computer back from the manufacturer, i accidently knocked it over, (but we didnt tell them that). but anyways, i installed itunes, and tried to plug in my ipod, this was the first usb device i plugged it since i got it back, and for some reason it worked fine for like 10 minutes, then automatically disconnected, then reconnected, and reapetedly keeps doing that whenever i try to plug in a usb device. i did not have this problem before i sent it to get repaired, and now i do.
View 5 Replies
ADVERTISEMENT
Jan 16, 2009
I have a laptop (Dell XPS M1330) running Vista Home Premium 32bit featuring an HDMI port and, as far as I can see, a soundcard called SigmaTel High Definition Audio. I regularly watch videos on my LCD TV using HDMI and I am constantly annoyed by the fact that the audio output doesn't automatically switch over to HDMI when the cable is connected (or vice versa when the cable is disconnected).
One would expect it to do so as this is how it generally works when f.ex. headphones are connected and indeed, on my laptop, the audio switches from speakers to headphones automatically without any problems. My solution to the problem is to manually change the default output device to HDMI and then restarting the media player. I cannot see why this operation cannot be automatic, and therefore I ask of you all if there is any way to accomplish an automatic switch from speakers to HDMI when an HDMI cable is connected
View 5 Replies
View Related
Aug 4, 2009
I tried to phone you today to invite you to a breakfast this Sunday 10:30 am at Ely's Restaurant. Seems like the number I have for you has been disconnected. Are you interested in joining us?
View 9 Replies
View Related
Feb 19, 2010
I have a Dell inspiron 1545(vista 32-bit) and the internet connectivity is really annoying..!! It gets disconnected frequently showing limited connnectivity and then gets connected automatically in a few seconds. i tried to unbind the ipv6..but still no good results. i am not tech savvy.
View 5 Replies
View Related
Mar 24, 2008
After upgrading to SP1 my wifi connection keeps disconnecting and reconnecting about once every ten minutes or so .... I'm using WPA-Personal security and I have disabled power management for the nic.
View 6 Replies
View Related
Mar 23, 2008
some stage over the last week the sound of my PC has been set very low and I cannot find a way to increase it again. I have disconnected the speakers and connected tem to my Ipod and they work a treat. Volume in System tray is on full, so is it in the "Spealers/ Headphone Properties". The vertical bar on the right shows that the System recognises the volume, i.e. the equaliser keps jumping! I can hear something when I turn up the volume on my speakers but the music is only slightly louder than the white noise! The problem occurs with mp3s, films, CDs and DVDs. Does anybody knwo what the problem could be and how to solve it?
View 4 Replies
View Related
Jul 1, 2009
When ever i am on my laptop or playing my ps3 and my house phone rings i instantly lose my connection. Both of these things are connected via Router (Wirelessly). So today I decided to call comcast (I have Comcast High Speed Internet) so when i called them they said that I needed a booster and that they would send a technition to hook it up. But is this really what i need?, is there anything i can do besides getting a booster? And what would this booster do?
View 9 Replies
View Related
Mar 24, 2009
Im currently using Vista 32bit, with comcast Connection 16 kbps. Whenever I try to connect to skype or Requiem ( game) I get disconnected for 20-30 secounds. I have reset my routher (Linksys), PC, Modems, ran straight line from my modem. Nothing seems to be fixing the issue. It almost appears to be a Vista issue! Comcast says my connection is 100% active and good! Im not to tech savy, but I can figure most of the basics out with ease.
View 9 Replies
View Related
Apr 9, 2008
every day my Vista SP1 gets disconnected from the corporate DFS share right after I stop working with my Vista SP1 Enterprise computer for an hour. We have two different type Vista SP1 computers in our network, and they both behave the same.
I just get an Event ID No 9, in Operational Log of Offline Files "Path disconnected. \company.comDFSshare", and that's it. Any clues. Power management, or something?
View 5 Replies
View Related
May 15, 2010
I have a program trying to flash on my screen. It is every 12-15 seconds apart and only flashes for a half second. I have tried to click on it. I have disconnected from the internet as I thought maybe someone was trying to access my computer. Still does it. I ran3 different spyware and antivirus programs. Plus, I ran rkill (all 4 types). I still have the problem.
If I am typing while it flashes, it erases my typing. I have defragged, debugged in addition to running spyware and antivirus programs. After doing each one of them, I have restarted my computer. Still get that flash. It is driving me bonkers.
View 7 Replies
View Related
Apr 5, 2010
I am using my Bravia as a tv/monitor. Yesterday I connected my old AMD 2800 to it to do some testing. It runs on WinXP. Now that I have disconnected it and am using my main pc which runs on Vista Ultimate the icons in my taskbar are so low on the screen that I can barely see them; also the width of IE 8 is such that I cannot see the arrow in the upper left hand corner that brings you back to the previously viewed webpage; the x, _, and mimimize rectangle in the upper right hand corner are also not visible; and the icons on my desktop are so far to the left that they are only half visible. I checked the resolution and it has not changed. See the attached, pls. The only possible reason for this that I can think of is that while using the AMD 2800 pc I had to download updates to its video card to solve a problem that I was experiencing while using it.
View 4 Replies
View Related
Mar 23, 2008
Can not get my HP 7400 scanner to work after upgrading to Vista Ultimate 32 bit. Not the hardware - works fine under XP pro using same hardware configuration. Did a clean install, installed motherboard BIOS updates, scanner BIOS updates, Vista updates and the correct driver from HP. The scanner installed and Device Manager says device is working properly. When I try to scan, scanner initializes, starts to scan then locks up. Then can no longer be seen. ASUS M2N-E motherboard with AMD dual core. Other than that Vista works OK with the rest of my system
View 9 Replies
View Related
Sep 30, 2008
i have installed the correct driver for this belkin bluetooth usb dongle model: F8T012XX1 but in device manager, it has the belkin device and microsoft bluetooth enumerator, which is great. but when u get further down the list. it has a tab named "other devices" and then a subtab with "bluetooth peripheral device" which has an exclemation mark on it. i have searched for driver software using the update service but it cant find no update. i have looked for the name of the manufacturer but found nothing.i then disabled the unknown device, and sent a picture to my mobile phone. which confirmed that it was not the belkin bluetooth device. so i uninstalled the unknown device, restarted the computer. then when i logged in, it said that it had found a new device and wanted me to find the CD that came with it.
View 6 Replies
View Related
Jun 6, 2007
I got it for my XP Desktop computer, and on my Vista laptop... Ive tried to send files, and it finds and recognizes the files i want to send... but when go to transfer them, hte flashes the disconnected sign near the exit button. This is after about 30 seconds into it aswell.
View 4 Replies
View Related
Mar 23, 2008
When I've installed vista, the installation have set the boot manager to be on a different disk than the the boot loader. Now, if I want to remove the hard drive containing the boot manager, the system won't load, which is reasonable given these conditions, nonetheless I DO want to remove this hard drive and still be able to boot, therefore I've searched and queried everywhere and done the following: Physically disconnected the hard drive with the boot manager on it (d and boot with the Vista DVD to run startup repair -> this didn't help, the startup repair found the operation system but didn't recognize any problem, when trying to boot the system would not load, the error I'm getting when booting is disk read error occurred press ctrl+alt+del to restart.
(reconnected d:, and system boots flawlessly, then) I've manually changed the boot manger (and memory diagnostic, the only other bcd entry on the d: drive) location with bcdedit to c:, and now bcdedit (and VistaBootPro) show the boot manager (and memory diagnostic) in the c: drive, HOWEVER, if I try to boot from that drive I get the same error: disk read error.................
View 4 Replies
View Related
Jun 1, 2009
I know this is a repetitive topic, but I can not seem to figure this one out. It is a HP Laptop DV9815nr. I do not know much about it as it is not mine, but the problem is the audio was cutting out and now there is nothing. The computer is not recognizing any type of audio device installed. Even in Device Manager, there is no option for Sound, game and controllers. I have tried downloading the driver and installing, but no luck there.
View 9 Replies
View Related
May 1, 2009
I'm running Home Premium 64 on a Sony Vaio Laptop (CS170F). I'm having a curious problem: Yesterday I plugged into the machine the dongle of my wireless logitech mouse, and for some reason the machine said "Your unknown device is ready to use" (my OS is in spanish, the messages may not be accurately translated). Since then, an annoying message pops every few seconds warning about an "unrecognized USB device", that "didn't work as expected". The best part is this, if I click on the tray icon, sometimes the informative dialog window is emply, an other times shows all the USB ports in the system plus one extra with a "unknown UBS device", even without any device plugged into the system. I've tryed removing the unknown device from the device manager, but it shows up again.
View 9 Replies
View Related
May 21, 2008
I had been running Vista Ultimate x64 for a few months and recently found that I can only use the original USB mouse?! Installation of any USB mouse would show a new "USB Human Interface Device" in Device Manager but it just won't work. Installation of the very same model of my original mouse didn't work neither. So basically I am stick with the current mouse?
View 4 Replies
View Related
Jan 1, 2009
I went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run
Press F11 to boot menu
Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
View 9 Replies
View Related
Apr 14, 2010
I have a Dell Vostro 1000 laptop configured on a static IP address. With the network connected all works as expected. When disconnected and rebooted networking is not active and the adapter is shown as "Media disconnected". I have tried to disable media sensing (which would fix this on Windows XP) by doing:-
1. Adding a DisableDHCPMediaSense DWORD with value 1 to HKEY_LOCAL_MACHINESystemCurrentControlSetServicesTcpipParameters
2. Running the following commands as an Administrator:- netsh interface ipv4 set global dhcpmediasense=disabled. netsh interface ipv6 set global dhcpmediasense=disabled. Neither options appear to have had the desired affect.
View 4 Replies
View Related
Mar 23, 2008
How Can I Get Cap And Num Lock To Automatically Be Set Upon Start Up On Windows Vista Home Premium Os
View 6 Replies
View Related
Mar 3, 2009
I've imported my contacts file into Windows Mail but something funny is happening. When I am creating a message and am typing the first few letters of a contact's name, some names come up automatically just as they did in the Outlook but not all of them, although I those names are there on the contacts list. I can't figure out why. In order to add these names I have to go to Tools, Select Recipient and add their names to the TO field. Is there a way I can get Windows Mail to insert all contacts names automatically?
View 6 Replies
View Related
Mar 23, 2008
Every time I boot up, User Account Control pops up and asks me if I want to allow this program to run "PSDiagnostic.exe". This program has to do with the functionality of my wireless print server and it needs to run or the printer on my print server will not function. If I allow the program to run everything is fine, but I would rather not have to be bothered with this during every boot up. I know I can disable User Account Control to avoid this, but is there a way I can leave User Account Control active and still allow this program to run automatically during boot up? Like is there a list of exceptions that I could add it to?
View 6 Replies
View Related
Oct 16, 2009
I have a multi boot system with XP, Vista, 7 (RC1) and Ubuntu. If I select "restart" in order to reboot, it just waits until I do a hard reset. If I select shutdown, then it does so. Neither XP or 7 has this problem. Any fix for this?
View 5 Replies
View Related
Mar 23, 2008
I am using window Vista OS. The IP address assigned to my PC by sify is 10.x.x.x. Usually when i connect the lan cable to my laptop and check uing ipcofig i get the same IP ,But every now and then the IP gets chaged to some other IP y.y.y.y .Now when i go and check using the IP config my y.y.y.y Ip becomes the prefereed IP and 169.x.x.x becomes the duplicate IP But if i check in the Manage Network pane where we set the IP address ,there it will be showing the correct IP only ( x.x.x.x assigned by sify ).
View 4 Replies
View Related
May 15, 2010
im running a dell laptop with vista home. i recently reinstalled the os and am having login issues. there is one user account and when i startup or come back from sleep, i have to click on my user account before entering password. is there a way to make it automatically select this account and display enter password rather than me having to click account first? i do want to require a password.
View 4 Replies
View Related
Sep 6, 2009
My new emails are not coming into my inbox unless I exit out of Mail and then re-open Mail. If I hit Send/Receive, I get an error box with "Some errors occurred while processing the requested tasks. Please review the list of errors below for more details. But there's nothing in the Errors box.
View 9 Replies
View Related
May 31, 2008
I want to be able to automatically log onto my user account after sleep or shutdown. I unchecked 'require password etc.' under 'control userpasswords2'. But it keeps logging on to an administrator account.Is there a way to make the computer open at the desktop of my standard account? I would like the administrator account to be password protected.
View 9 Replies
View Related
May 7, 2008
I have a vbs script that I use to copy files from my local drive to a network drive as a backup. The script works fine on its own (by double-clicking it or by running it from the command prompt). I created a scheduled task to have it run automatically, but it doesn't seem to work. It says that it completed successfully, but it didn't really do anything. Even if I select it in the Task Scheduler and then click "Run" in the Actions pane, it says it's status is "Running", but nothing is happening.
View 9 Replies
View Related
Jul 29, 2009
Using Vista Home and Windows Mail. Just d/l'd IE 8 and now in Windows Mail, the new mail is automatically selected and shows up in the Preview Pane. Before, I could select an old piece of mail and when new mail came in, it did not get selected until I chose to do this. I want this feature back, but don't know how to get it. The reason? It is my understanding that once a piece of mail is in the preview screen, the sender (spam or otherwise undesirable character), knows you have received it; or if in html format, it can open a virus. I know I can turn off the Preview and do have a button on the top menu to do this, but would prefer to not have to do this whenever going into the email program. Also, is it true that by looking at the Properties (instead of the Preview Pane) of an unopened email to view its content,
View 9 Replies
View Related
Feb 10, 2009
Vista Home Premium 32. Sometimes when I turn my monitor on in the morning I'm greeted by the password screen. When I enter my password Vista says "logging off" (and does log off) then Vista goes to the "log On" password screen. After re-entering PW again, I'm logged back on but all the apps, web pages and work that I had open last night are gone
View 6 Replies
View Related
