I have been unable to run any programs using my CD Rom drive. Every time I place a CD in, nothing happens...no error messages, nothing! I need to install a program, but I can't. This is really getting frustrating!
View 9 RepliesI am running Vista x64. My computer is a bit over a year old and all of a sudden as of a few weeks ago I am unable to install any programs or install any updates. Never had any problems before. I am not sure why this is happening but I don't have any viruses, that I know of. A virus scan is clear. When I try to update I get an error code of 80200053
View 5 Replies View RelatedRight after startup known good programs want to lauch but they are blocked. I was advised to disable DEFENDER - done to no avail. Windows Vista itself is blocking the programs. I click the taskbar icon and select view blocked programs but have no access to ENABLE them.
View 4 Replies View RelatedUnable to fully format or erase Any programs in the net I can use?
View 9 Replies View Related5 days ago I posted a problem about not being able to download exe files and not being able to install programs from CD's. The problem had been addressed a couple of years ago and none of those solutions worked, along with no recent listings of the problem. What did I do wrong on my post that I had no comments, suggestions or assistance offered at all?
View 7 Replies View RelatedRecently installed a video converters (Stoik Video Converter). However, when I try uninstalling it, I receive the following message, "Setup.exe has stopped working". After I close the dialog window, I see a popup on the task bar that says Setup.exe was closed due to Data Execution Prevention. Kind of frustrating that I can't even uninstall the program. Error details below:
Problem signature:
Problem Event Name:BEX
Application Name:setup.exe_InstallShield (R)
Application Version:10.50.0.125
Application Timestamp:4178b4a2
Fault Module Name:StackHash_4a9e
Fault Module Version:0.0.0.0
Fault Module Timestamp:00000000
Exception Offset:008d08e0
Exception Code:c0000005
Exception Data:00000008
OS Version:6.0.6000.2.0.0.768.3
Locale ID:1033
Additional Information 1:4a9e
Additional Information 2:236f2a1c65038fb7ca5862ccab73aabe
Additional Information 3:7f6a
Additional Information 4:a44f06ddc95f9aed1c0e8b4741db58d8
Looked across several forums and haven't found any answer to this type of question
I was wonder if anyone know a solution for the following problem. I have a ethernet hard drive and I've never had a problem until using vista and windows server 2008. both operating systems are unable to browse the drive, instead it completely crashes explorer.exe. Windows server 2003 & XP have never had trouble.
View 6 Replies View RelatedI have problem with my laptop with vista home premium 32bit. My C drive is full and I have lot of space(80 GB) left on D drive. Is there any way to move programs from C drive to D drive? I want to move microsoft office and other programs which occupy more space on C drive.
View 9 Replies View RelatedThe operating system is Window Vista Home Basic SP-1 and it has a 32-bit operating system. I connected the hard drive from my old Dell with Windows 98 to my new computer. I used an Airlink101 3.5??? USB 2.0 SATA/IDE HDD Enclosure, Model AEN-U35SE to make the connection. I am able to access the files on the old hard drive, but the programs don???t work. The whole point was to be able to use MS Word in the old format, rather than the new format, which looks completely different. Other programs don???t work, either. What can I do to make them work?
View 8 Replies View RelatedI'm running Vista Ultimate, 32bit, with a home network and internet. Recently I bought, and installed, the "Argosy Mobile Video HDD Pro," model #HV359T (it's essentially an external 1.5TB drive housed in a small case that lets you store and play media -- movies, music, pictures, etc. Nifty thing.) I set it up and it works just fine, and downloaded some movies on my home TV system via USB. BUT, I just can't map it to a drive on Vista on my home network.
The error I get is simple: "Windows cannot access 192.168.1.103" (The IP addr of the box). I can ping it, the supplied utilities can see it, but Vista just can't when I try to map it. I have no further diagnostic info, just that Windows can't access it; not too helpful. I suspect it's a security issue, but that's just a wild guess.
See attached. Cannot shrink the C: drive to create a new partition. using Vista Ultimate 64bit with SP1 refresh 2
View 9 Replies View RelatedWhen I try to connect an external USB hard drive or a USB memory stick to my laptop, Vista throws up a message saying: ???Windows needs to install driver software for your Unknown Device???. I let Vista search, but Vista cannot find the required driver. However, when I connect the same external USB hard drive or a USB memory stick to my desktop PC, also running Vista Ultimate, Vista has no problems recognizing the device and installing the required driver automatically and without throwing up any messages. I suspect that some Vista service(s) on my laptop might be disabled or not functioning properly, but I cannot find out which one could be the cause. Perhaps someone here could point me in the right direction.
View 9 Replies View RelatedIt's unable to either normally format any external memory devices into a FAT or FAT32 format, or unable to read it at all. I keep trying to open the device but it keeps saying that i need to format it, but because of problem 1, it can't be formated (it almost completes but the process shuts down, stating that it can't be formated). This problem has been happening for the longest time and I really need this fixed.
When I say external memory devices, i mean CDs, DVDs, Flash drives, SD cards, memory card readers. Everytime I check the disk management of these devices, it says they are Primary Partitioned (which is the normal status right?). And the only thing that seems to be the problem is the RAW file system (which I heard windows doesn't read)............
Just received a USB drive today from ebay 8 gig drive. Upon putting it into my computer it comes up as unformatted. So press format and errors at the end (unable to complete format). Then tried to format the drive via computer management in admin tools. All goes OK - 8 Gig showing. Copied 6.5 Gig onto it to test, and only some of the files work. About 2 Gig of AVI work but the others open as corrupted - same problem on my PS3. Thinking its either faulty or got a feeling its a fake 2 Gig. If its fake can you somehow restore the orginal boot / bios to get it back (better than nothing i suppose). Eneco flash drive 2.10 16777216 lba
View 4 Replies View RelatedWhenever I try to click on X: in My Computer I get the following: X: is not accessible. Access is denied. That's kinda funny given that earlier today, chkdsk /F was able to not only run on the drive but actually told me a few filenames (the records for those files had to be updated). I ran Ubuntu LiveCD and was able to access the drive just fine from that, as well. My question is... given all this, why am I unable to access the drive from Windows Vista? Sure, maybe the drive is going bad, but that doesn't explain why Ubuntu LiveCD and chkdsk /F can access it and Windows Vista cannot. So, short of just abandoning Window Vista all together in favor of Ubuntu, what can I do?
View 9 Replies View RelatedWhen I try to disconnect my external usb drive I get the following message. " Windows can't stop your Generic volume device because it is in use. Close any programs or windows that might be using the device, and then try again later." I have no programs running that would be accessing the USB external drive that I know of. Is there some way to find out what program is accessing it? I have things in the back ground like Windows Onecare who uses that drive to back up my files, but happens in the middle of the night.
View 4 Replies View RelatedI have -Dell XPS 730x with 6 GIG DDR3 RAM, Intel i7 64 bit Processor, 500 GIG disk,
I am running -Windows Vista Home Premium 64 which was preinstalled on the cpu
I want to -Dual boot between Vista64 and Windows XP32
So far -I have done everything to this machine from creating a virtual window in Vista64, to going into the command prompt from vista boot disk and running diskpart to clear hard drive.
I currently have -Two partitions on one disk. Primary 200GIG and Healthy 265GIG -Windows Vista Home Premium64 installed and running
The problems im having -every time try to boot from CD and run the windows xp setup, it is UNABLE to find ANY HARD DRIVES!
I have researched that
- I must have the disk partitioned
- Windows XP must be installed first
- I have to play with the boot.ini
- If i install vista32 it will be more successful
The errors I have gotten -STOP: 0x0000008E - i researched this and it said one option is to take out the excess RAM
I will be happy if - By the end of this weekend I can successfully run XP or both OS's in dual boot.
I need to go through all this trouble because - Digidesign has not written software for 64 bit proccessing yet. I need to make music.
My laptop motherboard fried, so I removed the hard drive and purchased a caddy. When I plug the hard drive in to my new desktop PC I am able to see that only 4GB of the 100 GB capacity is available (as should be the case). However, I cannot see any of my files on there (folders I had created on the desktop etc.).
The only folders I can see are PerfLogs, Program Files, SwSetup, Users, Windows and two of my personal folders (both containing some photos). I really need to find the rest of my files as I have 12GBs of photos and videos of my baby boy on there, and would be gutted if I cannot access them again (for obvious reasons). Nothing else is important.
I do not want to see any of the programs at the top of the list of All Programs (especially Internet Explorer). I just want to see the program folders listed, preferably sorted by newest or most recently modified first, by alphabetically would be OK. How to get rid of the 8 programs shown in here? Thanks.
View 6 Replies View RelatedIve been having a few problems with uninstalling some programs via the add/remove programs tool. For example I have been trying to uninstall Itunes and everytime I do Windows installer says it is preparing to remove and then it stops and a window come up that says "The system administrator has set policies to prevent this installation." and then another one says I do not have sufficient access to uninstall Itunes and to please contact system administrator.
So I spoke to a friend how recommended this forum subject and I followed the Take Ownership steps a few times but to no avail it still does the same thing. I can't update Itunes untill this one is uninstalled!!!!!
I use Vista 32 Ultimate and I have this problem during the startup of Windows: The UAC control stops 2 programs and I'm not able to let these programs load with UAC control active. Tried everything also in Windows defender but no success. I must always confirm and let run these programs clicking on the UAC block tray icon that appear during the load of these 2 programs. Someone tell me that these programs blocked by UAC must be updated from the developers to pass the UAC.
View 9 Replies View Relatedwhen i go to start, all programs, all my folders/programs show up, but then i noticed that theres a "programs" folder within the list, and when i click that, it shows all the same folders/programs that are in the "all programs" list. but then some of the folders within the ones in the 'all programs" list, they are empty, but they show up in the programs folder in the list. i dont know how this happened and i just wanted to know how to fix this issue.
View 2 Replies View RelatedThis morning, I started my computer, logged on and went on the Start Menu to access Microsoft Office programs. But when I went on the 'All Programs' menu, there were no programs listed! I really mean NO PROGRAMS AT ALL. This includes Microsoft Office folder and every other software and program i have got!.
View 4 Replies View RelatedI just got my new computer with Vista Home Premium x64, from Windows Professional XP. Installed programs are not showing up at Start/All Programs. Some are in directory C: Programs or Program Files (x86) and still dont't show up.
View 4 Replies View RelatedI am unable to send email. Using Vista. Have emptied outbox as suggested in other posts. Outbox was emptied without difficulty, sent to drafts, then deleted. Created new email - tried to send - still couldn't. Error message - unable to connect to smpt server. Have gone to tols - accounts - servers - re-entered info.
View 7 Replies View RelatedI am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
I'm running Vista on a PC that has a hd that has been formated into 3 discrete drives.Vista is loaded onto the C drive, programmes are loaded onto the d drive while i have my data stored on my E drive. By default any documents I save are directed towards My Documents on the C drive - how I go about changing that so the default is my Documents on the E drive?
View 9 Replies View RelatedI do not know how this happened but there is a folder called "Programs" in "All Programs". The content of the "Programs" folder is a duplicate of what are in the "All Programs" except "Programs" folder. How can I get rid of this duplicate?
View 9 Replies View Relatedwhen booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
View 9 Replies View RelatedDoes 'Local Disc' D mean it is a drive inside my machine or could it be my external hard drive?
View 9 Replies View Relatedi just bought My Book Essential 1 TB today... and when i got home i plug it and it works just fine but its bothering me that the HDD type is FAT32 .. so i format it and try to change it to NTFS.. but somethings happen and boom the electric in my apartment was down... and so when the electric back i want to format it again but i can't... there drive is detected but with no space detail... it says "Windows can't format Drive H: - Check to see that the disk and drive are connected properly, make sure that the disk is not read-only, and then try again.
For more information, search Help for read-only files and how to change them" when i open the Disk Management from (My COmputer > Manage) it seems it's already a volume.. but the weird thing there is no space detail.. and i cant erase the volume ... i've tried using diskpart but i can't do nothing because there is no volume and i can't erase the disk... no luck with fsutil cause its not ntfs... I havent tried 3rd party software and i havent tried it on other computer (don't have other computer right now) and WDC didnt give live cd for formatting because all of them was in the drive... though i already redownload it but the program is useless..