Startup: Application Failed To Initialize 0x00000005
Apr 26, 2008
I have a HP Mefia Center that came with XP preloaded and I made recovery disks. They also offered Vista free. I got the Vista and it came with "Upgrade Assistant" I ignored the assistant expecting it was more PR crap. I installed the Vista and it worked ok but I saw that XP was better. The installation did not give any option other than "clean install". After trying to install an old program that failed I started have problems with failed initializing programs including IE7. I was getting data execution prevention errors. On startup I get; Application failed to initialize 0x00000005. A problem caused program to stop working.
View 4 Replies
ADVERTISEMENT
Mar 26, 2008
When attempting to install Tax Cut State program a message comes up "TaxCutAZ.exe" application failed to initalize properly (0xc0000005) The program then terminates. Still can not get the program to load.
View 4 Replies
View Related
Mar 17, 2010
Cannot open any *.exe files to include browsers. I have tried to do a system restore, but did not help. I have also tried everything in safe mode with no luck.
I have tried to run hijackthis, but it won't run either.
View 9 Replies
View Related
Apr 11, 2009
I receive the following message when I have logged on to my computer: Windows Defender "Application failed to initialize: 0x800106ba. A problem caused this service to stop." I have looked at Help and Support but have not found anything to identify what the problem is. I run Vista Home Premium 64 Bit OS.
View 6 Replies
View Related
Mar 23, 2008
When attempting to install Tax Cut State program a message comes up "TaxCutAZ.exe" application failed to initalize properly (0xc0000005) The program then terminates. Still can not get the program to load. how to correct this problem?
View 4 Replies
View Related
Jun 13, 2009
I get a message saying evertime I try to start it, saying
that the application failed to initialize 0x800106ba. a problem caused this program's service to stop.to start the service, restart your computer or search help and support.
View 3 Replies
View Related
Apr 8, 2009
I got this error message after I turn off Windows defender via GPO in AD on a Vista PC: windows defender application failed to initialize 0x800106ba? I am looking for solution for the error.
Scenario:
AD 2003
Vista enterprise installation
Office 2007 installed
McAfee installed
McAfee firewall is installed
Windows defender can be turned off
Disabling the Windows defender GPO results in the error after rebooting the system: windows defender application failed to initialize 0x800106ba?
View 8 Replies
View Related
Mar 23, 2008
I just downloaded a bunch of application and did a lot of work on my computer. I do however, have samantic endpoint virus protection and did a couple of scans with no problems. When i try to open windows defender i am getting an error that says. Application failed to initialize: 0 x 800106ba. A problem caused this program's service to stop. To start the service restart your computer or search Help and Support for how to start a service manually. I restarted and tried to open it but got the same error.
View 9 Replies
View Related
Feb 16, 2009
This message kept coming up after I turned my computer on. What does this mean and what do I need to do to fix this?? "Application failed to initialize 0x80016ba." A problem caused this program's service to stop. To start the service, restart your computer or search Help and Support for how to start a service manually."
View 9 Replies
View Related
Mar 4, 2009
My daughter suddenly experiences: Windows Defender: "Error Code 0x800106ba Application failed to initialize" This is a fairly new machine (running Vista Home Premium) and it was delivered with McAfee virus protection installed. The initial McAfee license is about to expire so she renewed that license for a permanent licence today. There may of course be a connection here, but I fail to see what that connection could be.
She was guided to http://support.microsoft.com/kb/931849 which suggests to initially remove (uninstall) Windows Defender and then reinstall it. The only problem with this is that Windows Defender is not included in the list of installed programs that can be uninstalled, and when she tries to "reinstall" it Windows Defender is reported as already present on the system. I checked on my own system where Windows Defender is running without any problem, and the same applies here: Windows Defender is not listed among installed programs.
View 9 Replies
View Related
Jun 19, 2009
I'm trying to install either Firefox or Flock and I get the following error: Quote: Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features. I click "OK" and the program does open with, as it says, incorrect behaviour.
View 4 Replies
View Related
Jul 20, 2009
I recently got Halo 2,and before I had I had ran a test and it said I met the minimum requirements. When I tried to install it however, it would change my resolution to 800 x 600, the display the message-(Initialization failed.Either insufficient system resources were found to run the game or game data is missing or damaged.Reinstalling the game may fix this problem. When I also try to customize game install,it tells me-Installation cannot be customized after game installation is initialized. I looked at some other threads and tried to update my graphics driver,but it said I had a custom driver installed and trying to install another driver may damage it.
View 6 Replies
View Related
Apr 4, 2008
So, when I try to run Maya 2008 I keep getting this error: The application has failed to start because d3dx9_34.dll was not found. Well, thats a DirectX 9 DLL and so I am guessing I need DirectX 9 right? So I goto Microsofts DirectX site and get dxwebsetup.exe. But... I can't run it. I get this error: C:Windowssystem32advpack.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator.I hit ok, says it again, hit ok and get this message: Current logon user doesn't have the Administrator privilege. Please logon again as an Administrator or contact your Pc Administrator.
Well, I am the Admin and I have admin and even if I right click --> properties --> run as admin I get the same message... ok I figure I will just download the redistributable instead... I do that and I try to run the DXSETUP.exe and I get the same Admin error as teh web setup... I have no idea what is going on and now i am starting to get very angry... very very angry. This is the onyl problem I have had with Vista thus far... and it is the worste thing it could be, I need Maya...I am running Vista Ultimate x64 and the Maya version I am installing is Maya 2008 x64 designed to run on vista x64 so it's not that it is incompatible. mad.gif mad.gif
View 5 Replies
View Related
Mar 12, 2009
Windows Defender application failed to iniatialise 0x800106ba. A problem caused this program service to stop.
I have tried to download this again, but it says it is already installed on my Vista, but if I try to run it, the above error message appears and does so every time I start up, so I just get stuck in a loop!
View 9 Replies
View Related
Feb 11, 2009
I had no problems yesterday or ever before. Apparently there was an update last night, and since then my desktop won't start up. It gives me the error saying windowssystem32driversfltmgr.sys will not load. I did a system restore to the system checkpoint before that update last night - to no avail though. I've done the automatic startup checker twice using the vista installation disk, it says there aren't any problems. is there anyway to just replace this fltmgr.sys from another vista machine? won't boot to safe mode, same error. last known good configuration doesn't work.
View 4 Replies
View Related
May 15, 2008
Vista 64 Home Premium.
Where is the tab/command to initialize (fdisk?) a new HDD?
I am logged in as Administrator (system says so) with full control/permission.
I can see the hard drives in the Device Manager/Disk Drives. All drives are "good" per the controller and I can see them as physical devices on the computer.
They all show as "Not Initialized" when I ask each to opopulate the Volumes info, and there is no obvious/apparent way to do it. Nothing on the controller shows it either.
Tried "Simple New Volume" under Disk Management--
doesn't/won't work because drive is not initialized.
One drive = one big partition = one drive letter.
View 9 Replies
View Related
Jun 9, 2008
HP Desktop (1 year old) Vista Home Premium 32 bit SP1. Had AVG 7.5 for about six months (with email scan disabled). AVG offerred Version 8 and I allowed it to download and install. Big mistake!! Gave me nothing but trouble. When I tried to uninstall it, I realized it wasn't listed in Install/Uninstall. But I saw that AVG had an Uninstall as part of their program....so I used it. (My second mistake!)
Now, whenever I start up.....a window appears: "AVG Anti-Virus System. Could not initialize AVG Anti-Virus kernel interface." How can I get rid of this window? It doesn't cause trouble...but I hate seeing it everytime I start the computer. As you can guess...I'm not a Guru...just a user..so please try to keep it simple...if possible.
View 4 Replies
View Related
Mar 23, 2008
I've looked over whole internet, and I am very surprised to be unable to find any answers to this. I am setting up Windows Dynamic Striped (RAID0) or Spanned volume (GPT) over four SATA hard drives 1Tb each. Everything is successful. I format the drive, copy stuff on to it, read it back, its fast, very nice. Then I reboot. After boot up I foind out that my D: drive is gone, i.e., volume is offline (as reported by Disk Manager). I can boot as I am using separate (IDE or SATA) hard drive to boot the Vista from. Now, if I configure the striped volume to be less then 2Tb (e.g., stripe two 1Tb disks or four x 500Mb partition each), everything works fine. I reboot and the volume is still there running happily. No windows event log I can find corresponds to this problem.......
View 4 Replies
View Related
Aug 1, 2009
I recently purchased an new HP with Windows Vista 64bit. I can download the Acrosslite but Windows will not initialize the program.
I get this message:
Could not initialize installation. File size expected 1316988 size retunrned 349692.
View 5 Replies
View Related
Mar 28, 2010
I'm trying to play Age of Empires II in my bro's netbook, but I get an odd message "Could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw". Though, I've been searching, and it seems that it's not really an odd problem, looks quite popular. I even read some threads on this forum, but none of them had solutions that were still available.
View 4 Replies
View Related
May 23, 2009
I am running Vista 64 and installed a program which apparently had a virus or I got it using IE8. I found an entry in the start up tab that was causing a problem. I went into the registry and deleted the item from the startup tab and I also disabled it in the startup tab. The startup tab still shows the item even though it is disabled and deleted from the registry. Why does it still show in MSCONFIG and how do I delete it from the start up entry
View 5 Replies
View Related
Dec 26, 2009
i have tried everything said in this thread & i still cant initialize the HDD. i get this error:- This request could not be performed because of an I/O device error.
i really need to get access to my drive as it has important files i really need
View 9 Replies
View Related
Mar 26, 2008
I've looked over whole internet, and I am very surprised to be unable to find any answers to this. I am setting up Windows Dynamic Striped (RAID0) or Spanned volume (GPT) over four SATA hard drives 1Tb each. Everything is successful. I format the drive, copy stuff on to it, read it back, its fast, very nice. Then I reboot. After boot up I foind out that my D: drive is gone, i.e., volume is offline (as reported by Disk Manager). I can boot as I am using separate (IDE or SATA) hard drive to boot the Vista from. Now, if I configure the striped volume to be less then 2Tb (e.g., stripe two 1Tb disks or four x 500Mb partition each), everything works fine. I reboot and the volume is still there running happily.
View 4 Replies
View Related
Mar 23, 2008
I have just puchased my first Windows Vista computer - an HP laptop. I have purchased at leat five laptops since 2000 so I am familiar with setup and
comfortable with installations etc. I have three questions here.
1. My last computer had Windows XP and an 80 gb hard drive with 70 gb full - After copying the data only (55 GB) to my new 250 gb hard drive I have only 107 GB remaining of the 222 GB C drive partition. I have not yet added many programs. That tells me that Vista must be using 50-60 GB or more of the drive. Can that be correct?
2. My new computer takes 5-6 minutes to start up. After two minutes I get the welcome screen. Then the monitor goes black for a full two minutes before continuing the startup process. Is this normal for Vista?
3. Occasionally the monitor goes dark for a few seconds and a window pops up saying the display driver has failed but is back. Is this normal?
I certainly gained no speed with this new computer. There are many things I like about Vista. Since I have no previous experience with owning it I am trying to sort out if this computer is a lemon that should be returned or if I should just put up with the downside.
View 9 Replies
View Related
Apr 27, 2008
The last couple of days I had a few times a startup error. It said something like Windows couldn't start normally. Run Startup Recovery (Recommended) Start Windows Normally. I did the Startup Recovery and then it worked again but the next day or so the same thing, otherwise my system runs fine.
View 9 Replies
View Related
May 26, 2009
I have installed Microsoft Office 2007 SP2 from windows update...but i have a question....How can i delete this ''failed message'..not updates..only 'fail message'' from update history..look at this
View 4 Replies
View Related
May 23, 2008
I am running Vista on a Dell XPS 420. I came home to find both drives failed in a RAID 1 mirror. Dell gave me no help recovering data, but did send two new drives. I have installed Vista on one of the new drives without RAID. I wanted to see if I could recover any files from the failed drives, but I can't seem to get Vista to recognize either of the old drives that were in the failed RAID array. The failed drive does appear during boot up and still shows as part of a failed array. How can I get Vista to recognize the failed drive so that I can then attempt to run file recovery software on it?
View 4 Replies
View Related
Mar 23, 2008
I received this after my computer locked up when trying to open up windows Mail "Windows Mail could not be started, initialize junk filtering. Your computer may be out of memory or your disk is full. (0x80070002)" After closing that error out I get "Windows Mail could not be started because MSOE.DLL could not be initialized.
View 9 Replies
View Related
Oct 15, 2009
i've download batman and it dont work even install coz it says i am x 64 and the application is x32
View 9 Replies
View Related
Oct 8, 2008
i'm using vista x64 ultimate and having this issue for a long time, couldn't find a solution to fix it clearly.
Sometimes when i start Winamp, it just stops responding for few minutes and a message appears'' The program is not responding, if you wait for longer, it may respond etc..'' But even i'm not able to close it via Taskbar by Ending process or processes tree. Cannot get rid of it without changing the user or restarting the pc.
View 6 Replies
View Related
Feb 22, 2010
I am getting this error on start up ISASS.EXE application error then getting a black screen can move my mouse but nothig happens can't boot from safe mode/ last good config etc..
View 9 Replies
View Related
