my sound levels intermittently go up and down, not much but its noticeable when playing music loudly. I have already disabled all sound effects, switched plugs from back panel to front, and tried different speakers and it does only in WMP, every enhancement is off except for the EQ which didn't change anything anyway.
View 4 RepliesThe sound level recorded with my microphone is very low. I have tried to change the mic level but Windows will put it back to 47%, without allowing me to put the level up to 100%.Does anybody know why?
View 5 Replies View RelatedI'm a very capable user running a Dell E1505 here. The battery lasted less than a year, and then I replaced it with a brand new battery. This has been in there for at most a month now. The past two days I have had an interesting situation going on. The computer is running Vista Home Premium, and it's running on AC. The battery seems to be working fine. It's detected fine, the PC runs off of the battery, and it charges as well. It's not set to suspend, hibernate, or anything like that at any time; these features are all deactivated because I am never in a situation to use them.
However, for the past few days, I have closed the lid and then gone to sleep at night, but when I have opened it up the next morning, I have the red X icon that says the battery is not detected. I've unseated the battery and clicked it back in each time, and it is immediately recognized and operates completely normally as described above after that.
The first time that this happened, I thought it may just have been some odd thing as can happen now and then with computers, and I ignored it. I went through my day using the E1505 as usual: leaving it unattended for minutes or hours while doing other things, closing the lid before going to the store, opening the lid again, etc., and it worked fine. However, when I awoke this morning the X was there with the no battery message. I again unseated and reseated the battery, and all seems normal.
My keyboard will start malfunctioning intermittently. When I type "asdf" the results are "[]asdfghjkl;?`zxcvbnm,./-+1234567890-=qwertyuiop" when typed over and over. Notice that this is the middle row then the lower row and then the number row and then the qwerty row. This happens in Office 2003 programs when it occurs as well as other programs. It was causing too many problems so I had to restart and now it is not happening.
View 6 Replies View RelatedI just converted to Vista Enterprise with and IBM laptop and docking station. I keep losing my external IBM keyboard, 3 or 4 times a day. If I pull out the USB plug and put it back in to reset it my keyboard starts working again. I've updated the latest driver on the IBM website but still have the problem.
View 5 Replies View RelatedA few days ago i noticed that i would be in a game or watching a movie and vista would switch/crash back to desktop out of whatever i was doing. I then click on the window/application on the taskbar to reenter it and i can resume either the game or video no problem. was wondering if maybe a third party application like abobe could be causeing this? i updated the video driver still does it. i changed performance for Visual effects still does it. i checked all programs in the firewall exceptions and other settings still does it.
View 4 Replies View RelatedWhen I connect my Epson CX3200 printer to a PC with XP o.s., I can see the ink levels in the properties window. Wen I connect to a PC with Vista o.s. I am unable to view any ink levels.
View 9 Replies View RelatedI have purchased a laptop which of course, has vista. I am still on xp on my PC. On my pc I was able to add a second row of icons to my bottom taskbar. All my favorite programs and icons were on there. I cannot find a way to do that on my laptop with vista.Is there a way?
View 3 Replies View RelatedHow do you check the ink levels in your printer? Win 98SE had a window that popped up and showed you how much ink was in each cartridge. I am using an Epson Stylus Color 600 printer and Widows Vista Home Premium.
View 4 Replies View RelatedWhen I was running XP Pro my printer driver allowed me to see my ink levels. When I moved to Vista the old driver no longer worked and the Vista driver did not provide any capability for monitoring ink levels. Does anyone know of a utility that would allow me to see the ink levels in a HP g95 all-in-one printer under the Vista OS?
how much ink I have in the printer cartridges? When I had XP it automatically showed up whenever I printed. Now I don't know how to access that information.
View 5 Replies View RelatedI've just noticed that this little downloads forum is: "Registered users can share and swamp downloads.(Registered Users Only)". Does that mean we are expecting unprecedented levels of downloading activity?
View 4 Replies View RelatedI have an Epson Stylus C64 printer which I am able to use as normal (with ink levels and status monitor appearing) on my old computer with Windows XP.
My new laptop is Vista and although I have installed the Epson Stylus Printer Software that came with the printer onto the laptop, the Ink Indicator Levels and the Epson Status Monitor options showing in 'Printer Prefences' seem to be grayed-out/disabled. I am unable to gauge my ink levels so have no idea how much ink I have available and/or when to replace it. The actual printing seems to be fine at the moment but I am unable to tell when the ink requires replacing.
I have tried to re-install the Epson Printer software but nothing seems to change - the ink levels and status monitor contine to be disabled/grayed out. I noticed that when installing the software I am asked to disable any anti-virus software - I have Norton installed but have no idea how to uninstall it - my computer also seems to be automatically provided with something called McAfee Security - again I am unsure how to disable this and whether in fact I need to do this - it may be that the anti-virus programs are hindering the Epson software from fully loading? Any ideas and/or suggestions would be most welcome.
I am trying to adjust my mixer to accomodate my new speakers, the voice is too low, and the base is too high. I have accessed the mixer and tried to make it tollerable, but have failed. There is no direct bass and treble adjustment, and there is not a "user" or "custom" setting. There are only presets, the problems with these presets, is that they work in certain situations, but not in others. Any advise? Am I looking in the worng place? Can I put software in place to adjust the levels indepent of each other? I am using the onboard sound card on an Abit IP35 Pro, and I am using Home Premium 64.
View 5 Replies View RelatedI keep getting a yellow exclamation point on windows start navigation sound I can go in and select it and it works for the time it is selected. but as soon as I reboot the yellow exclamation point comes back how do I fix this can someone help me please it annoying and aggravating to have to turn that on all the time. I even did a system restore back to yesterday thinking I did something to it no go still dose it. nothing else broken all works good sound everything just not this one.
View 9 Replies View RelatedThis worked for me before but I messed it up. I used to be able to record the sound coming from my computer and play it to my microphone right away as it goes. Meaning when I record something, it would record whatever is playing on the computer. But I forgot how to make that setting.
View 9 Replies View RelatedI just upgraded to Vista U x64 and am having sound problems. I have a prelude x-fi sound card but the sound coming out of it is extremely low. I have maxed out every thing I can max (control panel sound, creative panel) and the sound level is whisper quiet. I have also upgraded all my drivers except the prelude's, I would but their website isn't offering those drivers at the moment. But the drivers supplied with the card are vista certified so I should get something. But my mobo, etc is all updated. I have been searching for a solution for two days to no avail.
View 8 Replies View RelatedI have windows vista home basic, installed on my laptop and I am having a problem with the sound recorder. Everytime I open it up, a window pops up saying, "Windows Sound Recorder is not installed properly. Run REGSVR32 WavDest.Dll." How do i go about fixing this problem?
View 9 Replies View Relatedi am having troubles with windows updates and a microsoft tech told me to uninstall anything to do wit sigmatel. i take it that sigmatel has something to do with the sound because now i do not have any. i sent them back an email but they have not got back to me yet. what to do to get the sound back?
View 8 Replies View RelatedMy Desktop PC was working fine yesterday, but today there is no sound at all from the speakers. I opened Device Manager and found everything normal: there was no yellow questions marks beside the Sound item. The speaker cables are also firmly connected to the PC. I've ran AVG, SpyBot & Malwarebyte's Anti-Malware to scan for virus, etc, but found none.
View 9 Replies View RelatedThe other day I was fiddling around with my sound settings, and as a result my sound stopped working. I get this error message:
Problem Event Name: APPCRASH
Application Name: rundll32.exe
Application Version: 6.0.6000.16386
Application Timestamp: 4549b0e1
Fault Module Name: RtkAPO.dll
Fault Module Version: 11.0.6000.38
Fault Module Timestamp: 4656a98c
Exception Code: c0000005
Exception Offset: 00074060
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 5991
Additional Information 2: 9a7e58d14ca03757451aa580f3cdf39e
Additional Information 3: 4a3b
Additional Information 4: 0249092b0350b2300551cf43f33bc910
Ive had no sound since I instaled Vista Im gona try to explain to problem even tho my Vista is in swedish. Anyway when I got to the thing were I choose what kind of sound I wont for exampel "Stereo" (Right and Left speaker) or 5.1-surround. Ive only got 2 speakers so mine is set to Stereo and theres no sound from the right and left speaker. BUT when I try the
square option whit 4 speakers: Right and Left still no sound from but the Back Right and Back Left theres sound.
I hope you understand the problem even thougth my bad english if not please tell me and Im gona try to explain/translate it better.
i recently purchased vista ultimate x64 and did the downgrade from xp pro sp2. computer ran like a dream in the customized version of xp i was running. now the system will not play sound...at all. proper drivers are installed, have tried it in media player and itunes and from the sounds window in control panel. system specs are as follows...
View 9 Replies View Relatedinstalled vista today the comp used to be xp since the install theres no sound what so ever its an realtek hd sound card updated the driver the lot as well found some codes
Problem signature:
Problem Event Name: PnPDeviceProblemCode
Architecture: x86
Hardware Id: PCIVEN_1106&DEV_3288&SUBSYS_08881849&REV_10
Setup class GUID: {4d36e97d-e325-11ce-bfc1-08002be10318}
PnP problem code: 0000000A
Driver name: HDAudBus.sys
Driver version: 6.0.5750.0
Driver date: 11-02-2006
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 2057
Windows was able to successfully install device driver software, but the driver software encountered a problem when it tried to run. The problem code is 10.
I bought a new laptop with vista home premium 32, she set it up as a standard user an now it's impossible to install anything onto computer because the system is still asking for admin. password and even if we know that one (well there haven't been password set up) in that dialog box it's nowhere to write it. How we can make her account changed to administrator?
Only one way I came up with is to use recovery disk set it up differently, well not sure about that and don't fancy it much.
I installed the service pack 1 and I don't have sound now. I have tried reinstalling my drivers, and all that other mumbo-jumbo from the microsoft page, but I still don't have sound.
I have vista home premium, running on an Acer aspire t180. Does anyone know what I can do, or where I can go to solve this problem? According to my computer, my speakers are working....there is just NO SOUND!
just installed Vista HP 64 bit and it went pretty good, for the most part. I am dual booting w/XP Pro 32 bit, on seperate hard drives. I'm pretty impressed so far. I do have one major problem - no sound at all. Here's my hardware setup: asus p5q pro, Intel c2d e8400, saphire radeon 4850, auzentech x-fi prelude, logitech z-5500, seagate 320gb sata(XP Pro), seagate 640gb sata(vista). soundcard & spkrs. work great in XP. I went to auzen website & d/l latest drivers, drilled down thru all the vista options & menus I could find, checked device mngr.
View 7 Replies View Relatedi had sound day before yesterday on my pc. i switched it on today and i have no sound the only time i have sound is when i put the pc to the hi-fi via the aux.
The sound was workibng fine on my machine until today...I've checked the connections, checked the properties in control panel, checked the volume levels on the system and in windows media player - and I don;t know what else to check.
View 7 Replies View RelatedI just got a new computer - based on Vista Home Premium, supplied with Creative Inspire 5.1 surround sound speakers and a Realtek sound card. When I enter the soundcard setup pages and test various options, the sound plays fine through all speakers. So there is a link between the computer and the speaker system, and the correct speakers are used as they are tested. But I'm not getting any system sounds playing, and nothing from Media Player when playing music files.
View 7 Replies View RelatedOnce in a while, I lose sound (very embarrasing)..happens when I play songs through a Dj program.
View 4 Replies View Related