How do you check the ink levels in your printer? Win 98SE had a window that popped up and showed you how much ink was in each cartridge. I am using an Epson Stylus Color 600 printer and Widows Vista Home Premium.
View 4 Replies
how much ink I have in the printer cartridges? When I had XP it automatically showed up whenever I printed. Now I don't know how to access that information.
View 5 Replies View RelatedVista started giving a blue screen a couple of days ago. Mentioned something about a bad device, but no new devices have been added. Went through the typical steps, tried to boot in safe mode and got the following errors:
AtBroker.exe The application failed to initialize properly. Click OK.
Explorer.exe The application failed to initialize properly. Blue Screen
Then booted to my install dvd, tried to fix errors. Came back with a failed check at the file system integrity check. Ran the check a second time and no errors are found. Can't boot in safe mode, and when i try to repair errors I get no errors found.
When I connect my Epson CX3200 printer to a PC with XP o.s., I can see the ink levels in the properties window. Wen I connect to a PC with Vista o.s. I am unable to view any ink levels.
View 9 Replies View RelatedI have purchased a laptop which of course, has vista. I am still on xp on my PC. On my pc I was able to add a second row of icons to my bottom taskbar. All my favorite programs and icons were on there. I cannot find a way to do that on my laptop with vista.Is there a way?
View 3 Replies View Relatedmy sound levels intermittently go up and down, not much but its noticeable when playing music loudly. I have already disabled all sound effects, switched plugs from back panel to front, and tried different speakers and it does only in WMP, every enhancement is off except for the EQ which didn't change anything anyway.
View 4 Replies View RelatedWhen I was running XP Pro my printer driver allowed me to see my ink levels. When I moved to Vista the old driver no longer worked and the Vista driver did not provide any capability for monitoring ink levels. Does anyone know of a utility that would allow me to see the ink levels in a HP g95 all-in-one printer under the Vista OS?
The sound level recorded with my microphone is very low. I have tried to change the mic level but Windows will put it back to 47%, without allowing me to put the level up to 100%.Does anybody know why?
View 5 Replies View RelatedI've just noticed that this little downloads forum is: "Registered users can share and swamp downloads.(Registered Users Only)". Does that mean we are expecting unprecedented levels of downloading activity?
View 4 Replies View RelatedI have an Epson Stylus C64 printer which I am able to use as normal (with ink levels and status monitor appearing) on my old computer with Windows XP.
My new laptop is Vista and although I have installed the Epson Stylus Printer Software that came with the printer onto the laptop, the Ink Indicator Levels and the Epson Status Monitor options showing in 'Printer Prefences' seem to be grayed-out/disabled. I am unable to gauge my ink levels so have no idea how much ink I have available and/or when to replace it. The actual printing seems to be fine at the moment but I am unable to tell when the ink requires replacing.
I have tried to re-install the Epson Printer software but nothing seems to change - the ink levels and status monitor contine to be disabled/grayed out. I noticed that when installing the software I am asked to disable any anti-virus software - I have Norton installed but have no idea how to uninstall it - my computer also seems to be automatically provided with something called McAfee Security - again I am unsure how to disable this and whether in fact I need to do this - it may be that the anti-virus programs are hindering the Epson software from fully loading? Any ideas and/or suggestions would be most welcome.
I am trying to adjust my mixer to accomodate my new speakers, the voice is too low, and the base is too high. I have accessed the mixer and tried to make it tollerable, but have failed. There is no direct bass and treble adjustment, and there is not a "user" or "custom" setting. There are only presets, the problems with these presets, is that they work in certain situations, but not in others. Any advise? Am I looking in the worng place? Can I put software in place to adjust the levels indepent of each other? I am using the onboard sound card on an Abit IP35 Pro, and I am using Home Premium 64.
View 5 Replies View RelatedI?m trying to install a network printer on a Vista machine. Vista is able to locate the printer on the network but when I select it for installation, for some time, Vista tries to connect and then pops up this message: "Failed Connecting to Printer - Access Denied" And then another window pops up with this message: "Spooler Subsystem Application stopped woring and has been closed." In fact the spooler service always stops, so I have to restart it on the services windows, within Administrative Tools of the Control Panel. The machine is new and has been installed yesterday. Everything else works fine. The printer I am trying to install is on a Windows XP Professional machine within the same network (naturally).
View 9 Replies View RelatedI have a Dell PC with XP Home and a Dell A960 Printer attached to it. I also have a new HP Laptop with Vista premium that has also had the same printer attached to it at times so the drivers are installed on HP laptop. I recently installed a router so I can use laptop wirelessly. That works fine. However, I am unable to print to the host printer wirelessly. I get message saying printer cannot communicate with computer. I tried everything I found on Google searches. I have enabled printer sharing on both. Do I have to make the Workgroup names the same and if so do I change the Dell with XP or the HP with Vista? I changed the Dell once to no avail so I changed back. Do computer names have to be same? I am a novice at networking.
View 6 Replies View RelatedDose anyone knows if they make a printer cable: I received a new lab top and it didn't come with the older printer jack on the computer. I guess I need to use one of the usb ports? My Epson 660 still works I hate the idea of getting a new printer when my old one works.
View 4 Replies View RelatedJust installed Vista SP2. Everything seems to work OK except for my Dell 1720 printer. It now prints an extra page before the actual document to be printed. There are just a few spurious characters printed at the top of this unwanted page. The following "proper" pages are OK. I have, so it seems, the lastest driver available.
View 7 Replies View RelatedI cannot set the default printer in Vista Business with SP1. I am connected to a domain trying to set a network printer hosted from a server as the default printer. I have seen a dozen or more questions similiar to this in this group as well as on other forums and found no answer. I see a MS-MVP come on and tell people to remove local printers such as the XPS and adobe printers. This is a ridiculous solution. Sure it may allow you to connect to a network printer but you have removed printers that you are going to need to use again. Unacceptable.
So far the only other solution that does not include deleting all the local printers off of the machine is to make sure you have write permissions to the default printer registry key. I have checked this and I do have write permissions(Full Control). SO WHAT NEXT? IS MICROSOFT EVER GOING TO COME OUT WITH ANOTHER FIX FOR THIS?
I'm unable to use spell check. I keep getting the following message "This language is no longer available for spell check". What do I need to do to activate spell check?
View 9 Replies View Relatedi have installed a printer from my main pc which uses xp pro to my new vista lap top ----- it shows the icon for the printer in the tray but i cannot still print any thing
View 7 Replies View RelatedI just upgraded my XP home edition to Vista home premium with an upgrade disk provided by Dell. Before the upgrade I uninstalled my HP 2575 printer and software because it was listed as a compatibility issue. After upgrade I reinstalled new software from HP for my printer from the HP website. I plugged in the USB cable from my printer. Vista recognized the new device but would not put it in the printer folder in the control panel. Vista did find driver software online but could not install it. The HP solution center tells me no HP devices have been detected. When I try to print I get a message that I don’t have a printer hooked up. That’s the back ground here is what I have done.
I have updated Vista; most were successful some security ones failed. I have Service pack 1 I uninstalled and reinstalled HP software many times I started my spooler and reinstalled printer and software many times. I checked Task Manager and the hpqste08 services are running. I uninstalled virus protection and turned off the firewall. I have done everything I can find at HP, Microsoft and here. I tried to reload Vista but got a Worker Thread Returned at Bad IRQL error message so I stopped reload.
The one odd thing I did find was in the Device Manager. In the Device Manager the HP 2575 is listed twice. Once under IEEE 1284.4 compatible printer and once under Other Devices. When I click on the one under IEEE 1284.4 compatible printer and update driver software it finds the driver and says it’s up to date. When I do the same on the one under Other Devices, windows finds the software for this device but encountered an error when trying to install it. It does this when looking online and when looking in C: drive.The printer still does not show up in the printer folder in the control panel.
I have a Vista Home Premium Laptop, an XP Home laptop and an XP Home desktop (and an XBox 360) connected to my Linksys wireless G router and an XP Home desktop connected via CAT5 to the same router. All connect to the internet fine. The XP laptop finds and uses the printer on the desktop fine. I had setup a share of the Canon I560 printer, connected to my XP desktop, on the Vista laptop and it worked fine. I don't believe I made any changes, but now it won't find the printer and I can't seem to install a new copy.
The Vista machine will not detect the printer and won't even find the XP desktop or laptop on the network. The XP machines find each other fine. All machines get their IP address from the router via DHCP. All are in the same workgroup, or it seems so. Strangely the Vista machine shows WORKGROUP and the XP machines show Workgroup, even if I type the name in caps, XP still shows Workgroup and Vista WORKGROUP.............
I have a Vista Desktop that has a wireless router. I have shared a printer, but I would like my Mac laptop to be able to print to it. Do I install the printer driver on the Mac or on the Vista machine? If I install on the Vista machine, is there a special installer? The printer is an HP DeskJet 2445.
View 4 Replies View RelatedI have a HP Color Laser Jet 3600n already installed on the company network. I just got a new gateway with Windows Vista Home Premium 32bit. When i go to the printer wizard it locates the 3600 printer on the network. Then it asks me to choose the printer software from a list. or choose a disk. I don't have the disk. So, looking through this list, it doesn't even have the HP Color Laser Jet 3600 in there. it's got a 3000 and then jumps to 7000.
View 9 Replies View Relatedi have a printer on my old windows xp computer. but i went to hook it up to my vista, obviously the printer is not compatible which sucks. so is there a way i can connect it through a network? i have no idea where to start or what to do first.
View 4 Replies View RelatedI'm trying to install my Printer Driver for Canon Pixma printer. When I run the executable to install the driver, it come back with "Printer Spooler is not running, Restart Printer Spooler. So I re-start Printer Spooler under Admin. Tools. Then I try to run the executable again. And again the Printer Spooler is stopped. It seems the executable stops the Printer Spooler?
View 5 Replies View RelatedWhats up with Spell Check? Can't seem to get to work.
View 6 Replies View RelatedHow do I run check-disk in Vista? No "RUN" command please as that doesn't work anymore. Where is it located so I can run it?
View 9 Replies View RelatedMy sister bring me a lap top Acer Extensa 4420, the problem is that every time you boot, Vista checks the C: drive looking for problems and the reset, after the reset Vista checks again the disk and reset again, doing this in a infinite way...
Before the chkdisk program start you have the option to skip it, if you do so you get a screen saying "Vista is Configuring the update 3/3" and then restart again...
The lap top have a rescue partition, with an auto-fix option, but it didin't worked, it was on running it all the night
When using the Spell Check, I inadvertantly clicked on the "Add" button, which put a word I misspelled into my Spell Check list. I would like to remove this unwanted word, but I cannot figure out to get rid of it, since there isn't a "Remove" button in the Spell Check window. Does anyone know if this word can be taken out of Spell Check?
View 9 Replies View RelatedMy hard drive appears to have some bad sectors and I would like to run chkdsk with /f to fix the problem but don't know how to do this as I need to run this program in elevated mode. If I try to run the program in Command prompt or Run?chkdsk /f I am told I do not have the previlidges to run it.
View 5 Replies View RelatedI 'm sorry if this is the wrong place to post this,but,I'm beside myself. I'm not very experienced on computers,but I can't get the disc check to run. I've tried to go to computer,properties,then tools the the check box, then to schedule a check upon restart,but the UAC box for permission never comes up,nor does it start when I restart the computer,what in the world it going on here it driving me nuts!! I am not good enough to go into the command prompt to do it,I don't know really how and not brave enough to try it. I just don't know about it. Could someone please let me know what is wrong? I have an Inspiron 531with Home Basic. Just the Basic computer.
View 5 Replies View RelatedI am using windows vista ultimate. Recently I needed to re-format. Now when I check for windows update.. via control panel, security, check for updates... After checking it says windows cannot check for updates, with error code 800736cc?
View 5 Replies View Related
