No User Partitions After System Restore
Mar 4, 2009
I did a system restore last Friday and all went well (I thought) However, when one of my 2 daughters attempted to gain access to her part, she was greeted with a black screen and no program icons. My other daughter attempted to do the same on her account, with the same result. Previous to the system restore, they could both access their partitions easily with everything on display. The laptop has a 250 gig h/d, and they were designated as standard accounts, mine being the admin account. They are particularly keen to retrieve their I-tunes stuff, so any help or advice would be gratefully received. I am trying hard to avoid a reformat.
View 3 Replies
ADVERTISEMENT
May 15, 2010
I believe my computer got infected with a virus. Windows Defender detected "TrojanDwonlaoder:Win32/Bredolab.AA" and "Trojan:Win32/Hiloti.gen!D". It claims to have successfully removed these. I restart my computer. When I log on, I get Data Execution Protection notifications about Rundl32 and the like. I also notice that "flvencoder.exe" is running and consuming 30% CPU. I did install this program (Gmax FLV encoder) and perhaps it contained a virus (though the program worked). I also don't recall that it should have started upon logging on. None of this really matters, I don't think. I did a System Restore to a point before I installed Gmax FLV encoder (3 days prior). The restore completes successfully. Upon logging into my account, I get see the "Preparing Desktop" message and know that this is not good news. My user profile was not loaded. All of the data is there though. What I first tried to do was logging into Safe Mode, and setting the reg. keys such that my old profile is loaded instead of a temporary one...................................
View 9 Replies
View Related
Feb 2, 2010
OS is Vista 64 Home Premium
My problem is this, i have 4 partitions on my hard-drive; on Drive C are all the user accounts which have their own security settings, but when I try to move my Documents folder to drive E (or any of the Drives) using the 'Move' tab on folder properties, although it still shows as a sub-directory of my user name anyone can access it on the other drive (but they can't on Drive C)
If that all makes sense, can anyone tell me what I'm doing wrong?
View 1 Replies
View Related
May 14, 2009
I just got my new build up and running late last night and during Vista installation, I did not make any partitions to my main system drive. I would like to make a couple, maybe one for Windows and programs and one for dedicated swap space. My main question is do you think it would be best just to reinstall windows and do it from there? Or just as good to use Disk Management to do it?
View 6 Replies
View Related
May 15, 2010
I just got a 500GB HDD to upgrade in a laptop and will be installing a clean Vista,I know how to make the partitions but i need some estimates of the sizes.Is/will the OS partition grow?I know it obviously will cause of system updates an such but can the "Program Files" folder go on the Data partition so programs can be install there an the system partition never grow etc.?
View 4 Replies
View Related
May 26, 2008
Why can't I use system restore to restore back to certain restore points? I was only successful twice with it. When my laptap was new and when I used it after re-formatting my hard drive. On all occassions after those two instances I can never restore back to any restore point. It always says that "unspecified error" line. If Microsoft doesn't know what happend, how could I. Why did they bother putting system restore if it doesn't work all the time anyway. It gives you a false sense of security.
View 5 Replies
View Related
May 28, 2009
After installing SP2, on 5/25, System Restore seems to have stopped creating automatic restore points every 24 hours. I checked the Task Manger and it is set for 24 hours. It shows a restore point being created on 5/26. System Restore shows the last Restore Point being created on 5/25 about 1 hour after downloading.
View 5 Replies
View Related
Apr 11, 2008
I have a recent problem installing Windows updates on Vista Ultimate as the update process stays on 'creating restore point' forever. I've let it run as long as 7 hours in this state, with no change. It looks like the system is unable to make a restore point sucessfully. I know it has worked in the past, as I'm fairly up-to-date on Windows updates. Reading some other threads, I've tried using Disk Clean-up to remove all by the most recent restore points, and then try to disable/re-enable system restore - this part without success. When I check the system properties for System Restore, the System Restore button is greyed out. I've attached a screenshot of the screen for reference. I've checked the group policies to verify the System Restore is not disabled there.
View 9 Replies
View Related
May 11, 2009
I went to accessories/system tools/system restore and clicked it. I then got a small dialogue window asking if I wanted to continue and I clicked continue. That little window disappeared but then nothing hasppened. I was expecting to see a list of possible restore points but nothing showed on my screen. I clicked system restore again and got a message that system restore was already running and would now exit.
View 9 Replies
View Related
Oct 23, 2009
the special junctions that Vista and Win7 have added to the profile directories for backwards-compatibility. No backup software I have seen (short of complete imaging software) seems to backup and/or restore junction points. So I find myself with the profile missing all the default junction points, and quite frankly, not sure how to manually recreate them. No matter what I do, I cannot seem to replicate the Vista/Win7's original junctions that are hidden when "Hide Protected Operating System Files" is enabled.
The junction points that I am referring to are things like ("My Documents", "My Music", "Application Data", "Local Settings", etc). Is there a tool out there that can accomplish this for me? Or is there somethign I can do by hand to recreate these junction points? I have searched and searched the web for hours, but cannot seem to find anyone who has asked this question before.
View 5 Replies
View Related
May 3, 2009
Not sure why but when I try to open system restore I get this message: "System Protection Settings has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I cannot make or restore my computer. If I go into system protection I get this error: C:WindowsSystem32SYSDM.CPL is either not designed to run on Windows or it contains an error. Try installing the program again using the original media or contact your system administrator or the software vendor for support.
View 9 Replies
View Related
Mar 23, 2010
I am new here and I have been having problems with my laptop for at least a few months now. And now I am fed up with it and just want to do a full system restore. I have no disks or previous system save dates. I talked to one of my friends and he said that i need a disc. I am just coming her for confirmation and or help. I am running a Toshiba Satallite P505D with and AMD Turion X2 dual core processor 4GB of Ram and a 64 bit operating system.
View 5 Replies
View Related
Oct 26, 2008
I wish the ****ing dumbass companies wouldnt preload computers with useless trials and dumb****. Ever since this computerwas purchased, I've had more problems than Lindsay Lohan had with DUI and drugs.
Holy ****. Games, Personalization, System Restore, System Backup (Error code 1068), User Accounts, and Windows Update. They show up, and then they dissapear right away. Any help please? Virusscan'd with AVG, tested hardware, it's clean, I dont know whats wrong.
View 8 Replies
View Related
Apr 25, 2010
I am working with a PC that has account and password issues so the user is blocked from accessing his files. I have tried Orphcrack on the system but it's not showing any passwords. The user tells me the system has been acting odd for some time now and - of course - he does not have a backup and to make it worse his tax information is on the system so he had to file an extension to get time for me to do this recovery and restore. I need to pull his files from the system to wipe, perform a clean install, setup his account and restore his files.
View 4 Replies
View Related
Jul 29, 2009
My wife was on the internet and suddenly System Pro popped up and started scanning warning my wife of a virus attack on her computer and wanted her to buy the AV Pgm for $49.95. She just clicked all the exits and got off of the internet and now she is locked out of her computer. We can't get system restore to work, Can't get safe mode to work, She has AVG 8 installed but cannot start it. Tried SFC /scannow but was denied access. Tried putting the Windows XP disk in to do a repair and was unable to get it to start. I think the only thing to do is reformat the HD and start over but her PC ignores the A drive and the dvd drives. I cannot get into it in order to re format it.
View 9 Replies
View Related
Apr 25, 2008
I am trying to get rid of system restore shadow copies on my Vista home premium. I keep getting system error when I try to reduce the room used on my C drive as I only have 28gb of 145gb left. I have tried typing in:vssadmin list shadowstorage For the above command to run you must use elevated privileges:
1.. Click on the Start menu then click All Programs / Accessories
2.. Right Click on the Command Prompt option and from the drop down menu click on the Run as Administrator option
3.. At the command prompt type vssadmin list shadowstorage and Press Enter
(NOTE: if the command does not run change directories to c:windowssystem32) After the vssadmin has executed you will see results similar to the following:.....
The output above shows space used on the C: drive by System Restore is 237.419 MB. The maximum space allocated for System restore is 2.092 GB To view the number of restore points you currently have on your Computer run the following command vssadmin list shadows Next, to reduce the allocated space used by Vista's System Restore, use the following command: vssadmin resize shadowstorage /on=[OnVolumeSpec:] /for=[ForVolumeSpec:] /maxsize=[MaxSizeSpec] Where example: vssadmin resize shadowstorage /On=C: /For=C: /Maxsize=1GB When decreasing the space allocated to System Restore, you will loose the earlier system restore points. The advantage is gaining extra free space. If you are concerned with losing the previous restore points, wait until you do not need them anymore before reducing the allocated space. If you plan on upgrading to Windows Vista or running a clean install and will need extra space, consider reducing the space after installation has completed. It is not recommended to disable System Restore. The capability to restore to a previous point in time or having the new Shadow Copy feature available can be a time saver if something goes wrong or if you delete a file. source: John Barnett Windows Vista Support I keep getting an error message. I seem to remember doing this before with my XP but can't remember how. Is there an easier way?
View 4 Replies
View Related
Aug 28, 2008
I've been facing issues with backup / restore / system restore
View 7 Replies
View Related
Jun 19, 2009
The mystery, at least to me, my PC was running almost 2 years. and it was not until about 3 weeks ago that System Restore began to save Restore Points the size of Approx 3 to 4GB daily. Prior to that the Restore Points were well under 1GB. it would be 3 to 6 days before I noticed the loss of 1GB. So why suddenly would the Restore File grew 1 one day from well under 1GB to between 3 to 4GB? That now is the issue I would like to know the answer to. and perhaps that file being saved with each Restore Point is not needed. I mean it wasn't needed for almost 2 years. so I can't think over night it became important but it sure is eating up HDD space.
View 5 Replies
View Related
Mar 12, 2009
(i'm running vista 32bit SP1, i hope its not too out of place to ask a question in a 64bit forum)
this looks like the closest i've found to a forum w/ my prob.
essentially i backed up my HD on an external (western digital) using "second backup" as the backup software.
i noticed after backing up that all my folder icons (favorites, contacts, music, pictures, etc...) reverted to the generic yellow folder.
i was able to change one or two (and only those in the shortcuts in "favorite links" heading of a windows explorer window) by right click -> properties -> change icon but all the folders (in their actual location eg. c:users"username") remain the ugly yellow folder.
changing them one by one seems inefficient and if annoying if it were to occur again.
i've done the right-click on destop -> personalize -> change desktop icon -> restore default, no result (tho i didnt really expect one since the desktop icons arent really the issue)
i've rebuilt the icon cache, no luck.
i've re-written the desktop.ini for a couple of them, no result (tho i didnt really expect one)
system restore isn't an option, i dont have an old enough restore point (hense the need for backing up).
i'm wondering of a systemic way to essentially restore the default icons for all these folders (music, video, downloads, etc...) and their respective shortcuts.
View 3 Replies
View Related
Feb 6, 2009
I have been using Vista HP for about 4 months. When first installed, there was an option 'Switch User' on the 'Shutdown/Log Off/Restart.... etc.' Menu. This option has now disappeared. How may I restore it?
View 5 Replies
View Related
May 13, 2008
Laptop connected wireless to a router. Desktop connected to same router with Ethernet cable. Seagate external HDD, connected to the desktop with a USB 2 connection. I'm trying to use Vista Backup & Restore to backup the laptop to the external HDD. When I try to set it up, the program finds the disk alright. But then it asks for a user & password. What user & password? I tried with all the PW's and users I have on the two computers, but nothing works.
View 5 Replies
View Related
Apr 13, 2008
Trying to restore my system but when I attempt to see the restore points Vista tells me the wizard is already running the this program will close.
View 9 Replies
View Related
Mar 4, 2009
My laptop suddenly shut itself down for no reason. When I restarted it, I was given a fresh new desktop with new music folders, documents folder etc.etc. I have since found out I was given a TEMP account - which is weird because I still logged into MY personal profile with no problems (and no warning messages about files being lost when I shut the computer down). Anyway, since I didn't get any message, I worked on my website pages all day and saved the work into a folder on the "new" desktop.
HOWEVER... after restarting the computer the next day and logging into my profile, I was presented with my original desktop - - - BUT NO FOLDER WITH ALL MY WORK! When I searched for the specific files and folder on my computer - I found the files, but I could not open them because "C:UsersTEMP(folder name)" did not exist! Is there a way.. ANY WAY of getting those files back?
View 5 Replies
View Related
May 11, 2008
I remember with WinXP that if I had my computer turned on and was not using it for a certain length of time (maybe 30 minutes), it would 'automatically' create a 'System Checkpoint' in the System Restore area. I could also 'manually' create a 'System Checkpoint.' What I would like to know is - doees Vista (Home Premium) create such an 'automatic' System Checkpoint if I have notebook turned on, but don't use if for about 30 minutes?
(I believe there is a way to turn on an Automatic 'System Checkpoint' that you can schedule to be done at a certain time. That is not what I am talking about. I am talking about an 'automatic' System Checkpoint' that is done if the computer is turned on, but not used for 30 minutes or more (approximately).
View 8 Replies
View Related
Apr 7, 2010
Every time I try to run System Restore I get an error message saying that the restore was unsuccessful because of an error. Try again with a different date
View 9 Replies
View Related
Apr 8, 2009
It seems no posible to restore the system from previous "restore points" with Vista Bussines. I always get the message "System restore did not complete succesfully. Details: The writer experienced a transient error (0x800423F3)."
View 7 Replies
View Related
Mar 23, 2009
I wonder if anyone could tell me how a user could execute a command to begin a system shutdown (Event ID: 1115). This is the type of shutdown windows executes when it encounters a critical error such as services.exe being killed. I cant find a way to execute it, even executing a shutdown command under the SYSTEM account doesn't seem to work. I need it because once executed it cannot be aborted even by an admin (as far as i can see).
View 7 Replies
View Related
Sep 22, 2008
My daughter recently changed the user password on my wife's laptop and has forgotten it. Is there a way to by-pass or get around this?
View 4 Replies
View Related
May 18, 2010
Daughters laptop was reporting that the HDD was about to fail, should backup and repair.
The concensus of opinion suggested a new HDD was the answer.
Have done that and created the restore disks from the original HDD.
Started the restore and went ok until nearly at the end of formatting the new HDD when I got the message
"error if it happens again contact HP" it did not happen again and appeared to restore files ok, did a verify and no errors.
Trying to boot from the HDD it now fails. Errors report registry incorrect plus others.
Cannot load my Vista version as is 64bit.
I cannot obviously send the errors to MS as the thing will not boot.
Any solutions obvious apart from getting a disk containing Vista 32 bit system
Laptop is an HP Presario running Vista HOme Premium 32.
View 9 Replies
View Related
Apr 18, 2009
Is there any utility built into Vista or XP to allow one to create a complete system restore DVD?
View 9 Replies
View Related
May 31, 2008
I have not been able to resolve my sound and messenger problems that occured after an update. However, when I go to system restore, it only goes back 5 days and I need it to go back 6. Is there any way to restore to a point previous to the points they offer?
View 4 Replies
View Related
