I need to boot into drive D, the HP recovery partition, so I can restore the HP laptop to it's original state, since it's all hopelessly messed up, but I installed EasyBCD and told it to "Reinstall the Vista bootloader". And now when I boot I no longer get the option to boot into drive D.
View 9 RepliesMy laptop is a Toshiba Satellite and it came with a Recovery CD that is supposed to wipe out everything and then reinstall Vista. I ran the CD, and it wiped out everything but didn't reintsall Vista - I got an error message saying: Error: Could not open WIM File F:5718XSP. swm. What can I do?? The laptop is empty now and I can't do anything at all with it.
View 7 Replies View RelatedI have a PC i am trying to format and reinstall windows vista. Unfortunately my mate has lost his original recovery dvd I made him and has now got a corrupted/damaged recovery partition. After all the searching I cannot for the life of me figure out how to do this. I want to format the hard drive and start from fresh as he has major Virus problems. I tried searching old threads but couldnt find anything like what I needed, I hope I am not repaeting a thread already. If so please point me in right direction. If it helps its a Acer 6252 travelmate.
View 7 Replies View RelatedI have a Vista computer that always boots into the recovery options and trys to repair the operating system. How can I stop this from happening? Even after repairing it does not try to boot normally! Safe mode does the same thing. Using bcdedit the RECOVERYENABLED is set to YES, how do I set this to NO? The computer failed to boot in the first place because of a thrid party service, normally I disable the service in safe mode but now the recovery options seem to be getting in the way.
View 8 Replies View Relatedi have tried everything to remove malware from my computer but nothing seems to work. so i figured i would just completely clean my computer and do a system recovery to get it back to the factory settings but i cant find a system recovery disk. i have a few questions: is it possible that i never received a disk and the recovery options were preinstalled? and how do i find out if my computer has preinstalled recovery options?
View 4 Replies View Relatedevery time I turn my laptop on, it goes straight to the system recovery options. I've run Startup Repair and Windows Memory Diagnostics Tool, and ran a few tests and it said there's nothing wrong with my laptop. I've shut it down and restarted it a few times but it still goes straight to the system recovery options instead of the logging-in page.
View 4 Replies View RelatedI'm using a Toshiba Satellite A300-1HP and i want to format. However, i don't have any disk that includes Vista or any drivers in it, as was the case with a previous Toshiba satellite model i owned. I only have the product key for Windows vista home premium, on a sticker on the bottom of the laptop.
View 9 Replies View RelatedI have been trying to create the recovery disk for my Acer laptop, I have used the eRecovery management and when I insert the DVD-R disk it comes up with the message burning failed insert a blank DVD. Could some one tell what I am doing wrong.
View 9 Replies View RelatedI was running dual boot fine between XP and Vista now im running both Vista it only reads my newly installed drive on boot and i have no boot options as you do in XP/Vista installs, im a newbie to dual drives and was wondering how to set it to have boot options now!
View 5 Replies View Relatedi've just installed XP pro 32x on my 70GB partition, and have Vista Ultimate 64x on my 160GB partition. I installed these myself and are custom OS's, im not sure if this has anything to do with the problem, but.. Once i installed XP, there was no options to boot into Vista. So in goes the Vista repair disk, and im back into Vista..and pretty soon id like to get back into XP ( My media centre, editing, creating videos, and playing games, and doing things non-vista compatable) but i dont want to have to recover my damn computer everytime. Btw ive tried other sites and forums before bothering you guys.
View 4 Replies View RelatedAcer Extensa 5220, Intel Celeron Processor 530 I tried to upgrade the OS from XP to Windows Vista. It was low of memory so I started deleting some unneeded files. But after that when I restarted the laptop I had an option F2 or F12. I tried both of them, but without access. When I put the XP cd it shows me NO BOOTABLE PARTITON ON TABLE. After that I can only turn off the laptop and do the same thing again and again. Please tell me how can I re-boot my laptop. All my important documents are on D drive, so I don't mind to clean all C drive and start all over, just how can I re-boot the laptop?
View 5 Replies View RelatedJust tried looking at a thread - Boot Advanced Options - Number of Processors - and i was greeted with the following:
View 6 Replies View RelatedLast night I ran a defrag on the windows drive and on the boot files, now when I try to boot into windows it just hangs at a black screen. So I tried safe mode, same thing. Last know working config, same thing. So I chose the 'Repair my computer' option. Chose start up repair, it came back with: Start up repair has found problems with this computer that cannot be fixed automatically. Well the error was a missing boot manager... So defrag deleted the boot manager for vista? I even tried system restore but it wont allow that either because windows says the drive is dirty...
So basically I'm posting this from Ubuntu live cd until I can figure out what the heck I can do to get back to Vista.Oh yeah, Ubuntu mounted the vista drive, and right in the main folder (C:) I see a file named bootmgr... So what gives? I'm going to transfer all of my files to a external thru Ubuntu then try a system recovery...
Friends Toshiba a205-s5000 satellite laptop w 32bit Vista
Will boot fine into safe mode/sm w networking..
Normal boot just sits at loading screen..
Have tried:
Disabling all startup apps and services -same
System restore as far back as it will go - completed, but the same
Recovery functions from boot menu - complete, but the same
Last known good config - same
Disable Driver Signature Enforcement - same
Enable low resolution video - same
Biggest problem is no Toshiba/MS restore CD/DVD available.
I do have a clean copy of XP I could try.
I have no problem formatting and starting over w XP, but it just seems like if it will boot to safe mode, it should be fixable ... software/drivers being the issue.
I don't know if this is the right forum but i wasn't sure which other group i could post this to. Does anyone know of a program that you can use to boot from cd into a file manager or something like that so if windows wouldn't boot i could still gain access to my files and copy them over my network to another pc?
View 5 Replies View RelatedI run vista 32 bit. I'm pretty sure it's Vista personal (PC didn't actually come with a Vista disk). I only use it for music and games,basic stuff. It's a Compaq....It shat itself recently, it wouldn't boot, so i borrowed the Vista Business disk from my dad to repair it/disk boot, and it worked fine, that was a couple days ago. Today it happened again, except it won't repair the same way. I start it up, it goes to the Compaq startup screen with 4 options; [Esc] Boot menu, [F9] Diagnostics, [F10] Setup, [F11] System recovery. Except I can never go to the diagnostics or system recovery menus, i press the keys and nothing happens. Then when i don't press anything it goes to a black screen with "Disk boot failure, insert system disk and press enter", so i do. Then it says "Windows is loading files" with a white bar below, once that's done it goes to the Microsoft Coporation green load bar that scrolls across over and over. Then it suddenly stops for a few minutes and a blue screen appears saying
"A problem has been detected and Windows has shut down to prevent damage to your computer DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps: Check to see if any new hardware or software is properly installed. If this is a new installation ask your hardware or software manufacturer for any windows updates you might need. If problems continue disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to disable or remove coponents, restart your computer, press F8 to select advanced startup options, then select safe mode. (pressing F8 does nothing for me) TECHNICAL INFORMATION *** STOP: 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x87995395) *** nvstor.sys - Adress 87995395 base at 87991000, Datestamp 46671a61".....
I've read just about every thread about vista not booting and am completely at a loss. I am running Windows VISTA Ultimate x64, do not have the original disk with me as i brought this computer to work on to my vacation spot to do some work. After running a botched program, I got a msg saying the computer would restart automaticly. Having extensive windows knowledge I know this is never a good situation to be in. I am using a windows x64 boot disk that i found from neosmart as I do not have access to the original disk.
Download: Windows Vista x64 Recovery Disc — The NeoSmart Files
I have tried every option in recovery options. Just to clarify, after everything posts, without errors, I get a black screen with a white cursor that moves down a few lines and doesn't do anything after that.......
I bought an Laptop with Vista Home Premium 32bit. If I install a FULL version of Windows 7 on this Laptop, can I use the Vista Home Premium 32bit key from the laptop on one of my other desktops? If so, would I talk to Microsoft or the manufacturer to get a disk without all the manufacturer "Bonus" software?
View 9 Replies View RelatedI've got an Sony VGN-BX197XP laptop that I've upgraded to Windows Vista Ultimate. Since then I've encountered some strange display-related issues:
1) I could only boot into Aero about 50% of the time. The rest of the time I forced onto the Standard theme with no Aero option. Since installing Vista SP1 I can't get Aero at all.
2) When not running in Aero mode I can't get the Windows Media Player to play video files, nor get a Perfomance Index.
3) If I plug in an external monitor I can't get a picture on the laptop monitor but I *do* get a picture on the external monitor and it runs Aero 100% of the time. It will also play video files and give me a performance index.
there must be many people who have moved all their mail from XP on one laptop to Vista mail on a new laptop. These two computers can see each other on the network. How can I easily move all history, contacts, folders etc from one to the other?
View 7 Replies View RelatedA customer asked if he created the recovery disc would he still have a complete working recovery partition. He is in fear of creating the disc then losing them.
View 4 Replies View Related4JHA.3676@TK2MSFTNGP06.phx.gbl> A customer asked if he created the recovery disc would he still have a complete working recovery partition. He is in fear of creating the disc then losing them.
View 8 Replies View RelatedI want to create a recovery partition on my windows Vista laptop. Pretty much i want to be pompted when the pc boots to hit f10 and have a count down of 10 seconds. I know this would be done through boot.ini however i have no idea how to do so. Also id make a seperate partition on my hd of ten gigs just for the backup image.
View 6 Replies View RelatedWhen I had XP, I had a startup problem so I rebooted with a Windows XP CD that came with the computer. It fixed it.
I'm not sure if this is called a boot or recovery disk, or both.
I was hoping to make a similar disk for my new Vista (Gateway)computer but I'm not sure how to do it. I read something about an emergency thing that takes up 3 DVDs!
I went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run
Press F11 to boot menu
Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
My Vista Home Premium (SP2) is corrupted to near unusability. Proof?
1. I click the Firewall control panel and I get an error "Error loading firewall.cpl. Firewall.cpl is not a valid win32 application" It sure is not valid: when I go to C:WindowsSystem32Firewall.cpl, it shows a file of ZERO bytes!
2. I try to click the Windows program installation/repair/removal control panel, and the window blinks in and out.
It's been 28 months since this Vista installation has been in use, and often rescued in ways that avoided a clean install entirely.
I think it is now time to do the clean install. For one thing, the 100 GB Seagate drive (the one with the bootable Vista partition) after about two years revealed 432 read errors with a region of the hard disk (discovered by 'ddrescue' while using Ubuntu Linux), probably because the HP Pavilion dv9500t like all HP notebooks is notorious for overheating, and this failure to cool damages CPUs and shorten hard disk life.
MY PROBLEM: I am now living on the other side of the world. I made recovery disks using HP's recovery manager, and I think the recovery partition is deleted (not sure), but they were left with relatives on the other side of the world (mistakenly). HP does not answer requests for how to get recovery disks.
QUESTION: I have recovered the product key for the Vista installation using product key recovery software (the Microsoft label on the bottom of the computer is smudged beyond readability, not so for HP's label). Is there a way to download Vista installation somehow and use my product key to autheneticate the installation?
On my computer there are two partitioned drive C: and D: D is recovery disk. Some of files have gone into it which I want to recover. I copied all contents in C but still it does not open. Can any body advice? I do not have administrator password.
View 5 Replies View RelatedI currently have an Asus M50SA laptop running Windows Vista Ultimate 32bit. Recently my hard drive was failing and had to get it repaired. So I used the Windows Back up utility and backed up the entire hard drive to an external 3.5 inch usb hard drive. I then sent my laptop off to get repaired and they took out the hard drive and put a new one in and re-installed Vista for me. However, when I went to run the recovery program from the install disk, it kept coming up with the error that it could not find any backups. Using the command prompt though, I could connect to my USB drive and see the image. What do I need to do to get the recovery software to see the VHD file on the USB drive?
View 6 Replies View RelatedSetup: My old XP machine crashed and burned (possible lightning strike). However, the Hard Drive survived. I used my IDE to USB 2.0 adapter and hooked up the HDD to my new Vista machine. Problem: While I can access, view, and copy all other files, I cannot access the My Documents folder because I don't have permissions. Well, let me clarify that - I can see the files, but I get the permissions error when I attempt to open or copy the files, individually, in groups, or by parent folder.Duh. Is there anyway I can access the Owner files (My Documents and all sub-folders) from my Vista machine?
View 7 Replies View RelatedI fried my external hard drive by accidentally unplugging it from it's port. Searching on the internet they want $400-$800 to recover the data. Is there any other way to recover it or maybe a cheaper way?
View 7 Replies View RelatedMy computer got the error, I don't know why but maybe it's because I ran a registry cleaner or the computer crash time ago. Now when I start the computer there are some dialog says that there are some problems on the reg and asks to restore the default value, and it keeps showing that dialog everytime I start the computer. I checked the event viewer, only seen the warning something like this:" Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards. DETAIL 1 user registry handles leaked from RegistryUserS-1-5-21-1216382924-1572877739-2728514917-1013_Classes: Process 988 (DeviceHarddiskVolume1WindowsSystem32svchost.exe) has opened key REGISTRYUSERS-1-5-21-1216382924-1572877739-2728514917-1013_CLASSES " It doesn't affect to the performance of the computer but gives some troubles.
View 6 Replies View Related