every time I turn my laptop on, it goes straight to the system recovery options. I've run Startup Repair and Windows Memory Diagnostics Tool, and ran a few tests and it said there's nothing wrong with my laptop. I've shut it down and restarted it a few times but it still goes straight to the system recovery options instead of the logging-in page.
View 4 RepliesMy computer has been acting funny for several days (even though I told it to be serious!), anyway, last night, it was running v-e-r-y slow while I was trying to work on it, and then it just automatically rebooted itself. A screen came up that said to perform a System Recovery, so this morning I did the Recovery, but now I've been stuck on this same screen because it wants a password, which I don't know it, nor can I remember it. It's a Dell Inspiron 1525 which I bought from Dell April '08. Is there some way to get a password with having to be charged for Dell's help? I'm thinking of just tossing the laptop in the recycle trashbin, and buying a new brand.
View 6 Replies View RelatedI have a Vista computer that always boots into the recovery options and trys to repair the operating system. How can I stop this from happening? Even after repairing it does not try to boot normally! Safe mode does the same thing. Using bcdedit the RECOVERYENABLED is set to YES, how do I set this to NO? The computer failed to boot in the first place because of a thrid party service, normally I disable the service in safe mode but now the recovery options seem to be getting in the way.
View 8 Replies View Relatedi have tried everything to remove malware from my computer but nothing seems to work. so i figured i would just completely clean my computer and do a system recovery to get it back to the factory settings but i cant find a system recovery disk. i have a few questions: is it possible that i never received a disk and the recovery options were preinstalled? and how do i find out if my computer has preinstalled recovery options?
View 4 Replies View RelatedI need to boot into drive D, the HP recovery partition, so I can restore the HP laptop to it's original state, since it's all hopelessly messed up, but I installed EasyBCD and told it to "Reinstall the Vista bootloader". And now when I boot I no longer get the option to boot into drive D.
View 9 Replies View RelatedFirst off, when I go to Create a Restore Point, it always takes the system about 20-40 seconds before it gives me what I want which is C drive checked in the list to create a restore point on. It shows me all my USB hard drives and other partitions, none of which I ever want to choose to create a restore point on. Is there a way to choose to have only the C drive come up on this list of possible drives for restore points? (I assume this would be quicker, since it would not have to find all those other drives/partitions before showing me the C drive.)
Secondly, since I only have an 83gig partition for C drive with Vista (64-bit Home Premium) and programs using 43 gigs of that; so how much space do I really need for System Restore points? I know there is a page here on this forum somewhere for going into the system via Command and changing the amount of space allotted for System Restore. Should I leave the Default allotted space or should I change it to a smaller amount? (My computer came shipped with a 700+ gig C drive but I shrank it to 83gigs and the rest is for just archiving, with a special partition for ripping and burning and decoding files.) Third: Where are the System Restore point files or whatever they are stored?
Fourth: Aside from manually creating a Restore Point via System Protection, is there a way I can make it create a Restore Point once a day at a particular time? I think it creates one at startup every day (I'm not sure, but I seem to recall that it does this), but is there a way to tell it, say, to create one every day at 5pm, or something like that in addition to creating one at start up? Or would that require too much disk space alloted to it? (I have a big hard drive, but I'd just as soon not junk it up with an excessive amount of System Restore space.)
i am using Windows Vista Home Premium, ive run into a program installation problem, ive managed to remvoe the program, but my laptop still messes up a whole lot. Now when i run system restore, it only gave me one option, their recommended one...which was 10minutes before the uninstallation....i wasn't able to choose anything else, whether it be a day back, or a month back...anyway to fix this?, my friend has the same laptop as i do same vista version from the same store, but he doesnt have the same problem.
View 5 Replies View RelatedSystem is not recognizing my pw and needs a pw reset disc. I don't have one. What are my options?
View 8 Replies View RelatedIs it advisable to NOT allow system restore to run every day? I feel that I don't need this because I do very few changes to my system. This task uses resources I may not want to give up. Also, If system restore runs every day, It is very hard to find a particular restore point that I had made, say 2 weeks ago.
View 5 Replies View RelatedI have a system that has FAT16 file system on it. I have that file system on that for some reason so I don’t need to upgrade on that….but recently I had some files deleted and now I need to get them back. They are important for my official use and hold great importance. I know that there is software for recovery but since I have a FAT16 file system I guess that all won’t work on that.
View 4 Replies View Relatedi installed sp2 several times. First time it worked fine until we had a power outage and it unregistered my windows installation and cited security breach as the reason why it could not rereg the os. so I reinstalled the OS. after about a week i installed sp2 and again it worked fine for about 3 days Then it unregistered the os again. This time i uninstalled the SP and all was fine. went to reinstall the sp and it would make it to the 100% mark and back out the whole installation.
AFter reading forums til my eyeballs bled i found i could "rearm" the system. I did this and SP2 reinstalled fine. The next day updates told me i had 1 important update and it was a sp2 uninstallation tool. I clicked ok and d/l it when the system rebooted it promptly removed sp2. I reinstalled sp2 it reinstalled fine. The next day new definitions for defender came in and when it rebooted it removed sp2 again>??? Any ideas this round robin installation system seems to be stuck in a loop and im stuck with something just not sure what.
I recently have managed to gain a corrupt file on my computer this basically means my computer does not startup. I have a boot disk available for my system (Windows vista x64 ultimate). However when it comes to trying to select a operating system
in the system recovery options the box is blank and i have no operating system to select. I have a feeling the fact i have sata raid setup on my computer is the reason as to why i cannot see my C: drive. I know this will fix my computer if i can only locate an operating system to detect. I have already carried out all the usual suspects of what is wrong like system restore etc but i cannot find a hard drive to restore.
i bought this acer PC and i hate the recovery disc. i have a cd key on the side of my case. Can't i borow a Vista home premium 32bit disc and use the cd key on the side of my case because i H8 recovery disc's. it doesn't give the options to format or which hdd to install system on
View 9 Replies View RelatedI will probably do several system recoveries in the next couple of months for a Vista problem that is too lengthy to explain. A friend told me that causes wear on a hard drive and can shorten its life. Is that true?
View 6 Replies View Relatedi cannot get into system recovery by tapping f11 on restart i have vista 32 bit system,is there an alternative way to access system recovery ..
View 4 Replies View RelatedI tried System Restore up to the previous 4 restore points, but it didn't work. I ran System Recovery with the recovery disks I burned when I purchased the computer, but it froze up at 1% on Reinstalling Original content. I am currently running the System Restore from the recovery partition on the computer, but it is freezing up again at the same spot.
View 6 Replies View Relatedvista ultimate, no SP1 yet, cause it won't take on my system and Panda Titanium AV i get a message that says Panda has detected a worm on the computer and I need to restart it to complete the removal. i restart, and when I do, it goes to the desktop, but none of my programs work. every time i try to open one, it gives me a message saying wininet.dll is missing.
i can't open any programs at all. i can't open explorer at all. i tried a system restore, but it said it failed and did not reset anything. i don't know if it will help to boot it from the DVD, in fact, when i think about it, the DVD drive has not been working. if i try to put a CD or DVD in, the drive disappears from my system.. so i'm not sure that will be an option either short of going out and buying a new drive.
i used the full system recovery on vista home basic of my friend's laptop and i forgot to backup his files.. is it possible to undo the system recovery like we always did in system restore.? i ask this bcoz the laptop is not in my hand right now so i cannot look if there
is an undo option of system recovery.
What are the basic differences between XP & Vista? All we do is surf the web, email and download an occasional game. Norton AntiVirus is always on and always up-to-date. My XP machine is dying big time & I can't figure out how to save it. It won't recognize the System Recovery disk that came with the machine, but it will recognize other CDs. That CD must be bent or whatever. The SPs are up to date. I'm running Office XP and it is taking Word and Excel 7 or 8 seconds to load; it used to open in a snap. I installed the latest edition of Firefox and loading web pages with it is taking too long. Most pages should just snap open. I guessed we've been "phished" or whatever because some of the ads I run into know that I live in Seattle. Our network connection is DSL and we haven't made any changes of any consequence that I know of to this machine in ages. I put SpyBot on it a week ago and twice when WinXP started, the Spybot folder opened. Not the program but the folder.
View 9 Replies View RelatedI am wondering if you need to re-install Windows after a hard drive failure before you use a "ghost" image. I used Macrium Reflect to create it.
http://www.macrium.com/blog/2008/03/...umReflect.aspx
Do you install Windows on the new drive or just install the "ghost" image of the drive before it failed?
First and foremost create a Recovery Disc and keep it safe and do not switch off the System Recovery utility. Do not remove the bloatware came with your PC unless you are desperate for space in your Hard disc,if and when you remove them do it one by one monitoring the response of the PC. If you couldn't get SP1,don't loose your sleep over it because it is not for the benefit of the user and it is designed to stop the user using other free third party softwares and tools(in my opinion anyway and remember I am not an expert).
Do not rely solely on the advices and do your own research as well because these so called advisers haven't provided me with tangible proof of their competence. Most of them hail vista as the best but wouldn't say why. If you ask any questions,they will blame you first for not asking the question properly and point you to a website to learn how to ask questions. Then they will request the third party software details and blame them. Now the turn of your hardware incompatibility which creates the problem. When everything fails they will accuse you of being an Ubuntu user. I suspect these so called experts use Ubuntu or some thing and pretend to be Vista experts and trying to damage the image of Vista. However,there are many helpful sites available and one of them is: www.vistax64.com If you do the basic housekeeping maintenance you will do fine.
My PC wont start onto my Desktop, the only thing you can see is the "System Recovery", and the "System Recovery" doesnt work (it wont repair). The computer did shutdown while i completed an programinstallation, probably a virus?:....
View 5 Replies View RelatedDoes anyone know if there is a downloadable version of Vista? I have a gateway laptop and had a crash. I tried to use the recovery partition and instead of reinstalling my system, it wiped it and then said something to the effect of insert you recovery cd. Well I bought my computer at Best Buy and of course they don't provide the discs with the computer!! Ahhhhh!!!! My computer came with Vista installed and I have a valid CD Key, but no disk now. I have ordered a recovery disk, but it will take up to 8 business days to get here. Does anyone know if you can download an evaluation copy of Vista or any copy of Vista for that mater??? I figure all I need to do is get it installed and I can use my CD Key.
View 6 Replies View RelatedI have an Acer 9410 laptop with Windows Vista and I had taken it to computer techs to fix some mouse pad problems as well as some startup freezing problems. They said it passed their PC check so didn't appear as anything was wrong. They said I could try to do system recovery to restore it back to its factory settings. Well, when I initially tried it, it didn't work so then, not thinking this through and not being as familiar with this as I would like to have been, I accidentally rand the Anytime Upgrade CD thinking it was also the recovery CD.
Of course, I found out after the fact that it was just that, so it reinstalled another version of Vista on my computer which then completely wiped everything including the Acer emPowering Technology software which contains the software to do the system Recovery. But it also removed some of my original drives like the memory card drivers, microphone, and maybe the webcam. In the process it saved a bunch of old Windows files to my hard drive. Are those still useful and is there any way
I can recover those drivers besides getting the recovery CD's which I can purchase from Acer or the store where I bought it from for around $40.
I aquired a Gateway GT5058 with a bad hard drive from my neighbor and I will note it had Win XP Media Center Edition installed. The bad hard drive was fully accessible from my Vista machine but the primary partition gives an "error to load operating system". Visible inspection of the hard drive shows a melted area so I am shocked the drive was able to be accessed since it will not boot in it's native machine. I had an old 40 gig drive laying around so I used a recovery disk from my Gateway laptop and low and behold it installed just fine and the machine is fully functional so I want to get another drive for it.
First problem is that the previous owner might be able to locate the system recovery software or he might not...I will probably know this in a few days. If he can locate it then I have no problems but I am preparing to have to restore this machine an alternative way which is what I need help with...........
i have a home built system with vista ultimate. i am trying to create recovery discs! there is no recovery manager, what r my options?
View 8 Replies View RelatedI'm trying to do a system recovery for a friend. She has a gateway computer. I forgot the model. She is in another state so it's very difficult to do over the phone since basically it's like being blindfolded. Her computer is messed up so it looks like recovering using link one is out of the question. So my question is if I have her use the link 2 which requires the disc, how should I have her do the recovery? When it comes time to select what kind of partition to create which do I select? Format partition? She is the kind of person who is not familiar with computers and gets aggrivated pretty easily so I'm trying to do this as easy as possible.
View 4 Replies View RelatedI previously had a problem on my Gateway Laptop Computer - Gateway Core2 Duo Centrino, that came pre-installed with Windows Vista Home Premium, which I could not fix. I had to do a System Recovery using the on-screen program and did not back up any of my files, in attempt to clear out everything that I had on the computer. After I completed this process, I set up my desktop and internet, and started over. When reviewing my Hard Disk Drives on my "Computer" menu, I notice that my C: Drive is almost all the way full (8.55 GB free of 139 GB).
Although I downloaded a few programs and set up my Internet Security, I am sure I did not install anything large enough to use up almost all of the computers storage space for programs and files. By doing the System Recovery I thought that it would erase everything so that my computer would be back to it's factory condition. Could my previous files still be in the computer? After searching this forum, I did not find any information on the specific question that convinsed me of the soultion,
or a course of action.
I created a restore point and went into the System Tools menu and attempted the disk cleanup on the recovery drive C: where Windows Vista is stored and then cleaned up the up the Shadow Copies, and nothing helped. I went through many windows folders and found nothing that would amount to the vast amount of space that is apparently taken up.
my son decided to do a full recovery of his hp530 laptop for some reason and all seemed to go well but for one small proberlem, he cannot access the internet connection unless he uses the routers dongle which works alright. laptop hp 530vista home basicrouter dynamode+donglevirgin cable b/bi.
View 8 Replies View RelatedI run vista 32 bit. I'm pretty sure it's Vista personal (PC didn't actually come with a Vista disk). I only use it for music and games,basic stuff. It's a Compaq....It shat itself recently, it wouldn't boot, so i borrowed the Vista Business disk from my dad to repair it/disk boot, and it worked fine, that was a couple days ago. Today it happened again, except it won't repair the same way. I start it up, it goes to the Compaq startup screen with 4 options; [Esc] Boot menu, [F9] Diagnostics, [F10] Setup, [F11] System recovery. Except I can never go to the diagnostics or system recovery menus, i press the keys and nothing happens. Then when i don't press anything it goes to a black screen with "Disk boot failure, insert system disk and press enter", so i do. Then it says "Windows is loading files" with a white bar below, once that's done it goes to the Microsoft Coporation green load bar that scrolls across over and over. Then it suddenly stops for a few minutes and a blue screen appears saying
"A problem has been detected and Windows has shut down to prevent damage to your computer DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps: Check to see if any new hardware or software is properly installed. If this is a new installation ask your hardware or software manufacturer for any windows updates you might need. If problems continue disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to disable or remove coponents, restart your computer, press F8 to select advanced startup options, then select safe mode. (pressing F8 does nothing for me) TECHNICAL INFORMATION *** STOP: 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x87995395) *** nvstor.sys - Adress 87995395 base at 87991000, Datestamp 46671a61".....
I don't know if I am in the right place. But the people here seem to know what they are talking about. I have HP Pavilion dv5-1235dx Entertainment Notebook Pc. Windows Vista Home Premium SP2. I have already talked and emailed HP about 20 times. I had a problem with total care advisor so HP told me to uninstall it and then reinstall it so I did and the website they gave me to download it was really to update it and would not install. Now they say I have to do a system recovery. Is there anyway to download the HP Total Care Advisor without doing a system recovery? I was told by HP that I need this to do hp updates and it is important for my computer.
View 9 Replies View Related