I have a retail version of Vista Home Premium Upgrade which I used to upgrade XP home edition OEM around 6 months ago. Tomorrow I`m upgrading my Processor and Motherboard and would like to do a fresh install of Vista if I can. The problem is I have lost my XP serial key (was stuck to the case as a sticker and was peeled off and chewed up by my 2 year some months ago). What options do I have to do a fresh install? Am i better off reinstalling Vista over the top of my old version? I would though really like to do a Format C: though and get a nice fresh install for my nice new system.
I have a retail version of Vista Home Premium Upgrade which I used to upgrade XP home edition OEM around 6 months ago. Tomorrow I`m upgrading my Processor and Motherboard and would like to do a fresh install of Vista if I can. The problem is I have lost my XP serial key (was stuck to the case as a sticker and was peeled off and chewed up by my 2 year some months ago). What options do I have to do a fresh install? Am i better off reinstalling Vista over the top of my old version? I would though really like to do a Format C: though and get a nice fresh install for my nice new system.
I just upgraded my system's motherboard, chip, and ram and ran into a big problem. When I booted up for the first time, Vista started to boot up then reset. When I ran recovery, it told me some drivers were corrupted (probably the old hardware). I ran the motherboard disk and installed the new drivers and to make a long story short, it didn't work. Add that to the fact that I can't find my serial number sticker and I'm screwed. Is there a way to find my serial using the Dos prompt or can windows pull my serial off my hard drive if I reinstall?
I have a new laptop that I got from Dell and want to do a 100% clean Vista install on it. I have the DVD that came with it to restore vista, which I don't want to use because of all the extra crapola that it installs. I also have an x32 Vista DVD that came with my VIsta Upgrade retail package. My question is - since I have the serial number that came with the laptop, will it work with the retail DVD even though it's an OEM serial?
I have a cash drawer that attatches to my computer via a serial port. My XP machine crashed not long ago and I bought a Vista computer, but it does not have a serial port available. I have a serial to USB cable adapter, but I cannot get my cash drawer to open using it. Does anyone know how to open the cash drawer using this adapter?
Bought and installed WEB EASY 7. Ran fine no problems. Shut down system and when I started up later and executed WEB Easy it said that it could not fine the serial code. Put the serial code in again and it ran fine, until the next shutdown and restart. Worked about 6 weeks with WEB EASY (Avanquest) to resolve and they could not. Their final fix was to format the disc and install a clean Vista with all updates.
I have not problem with any other software that I have purchased. I have uninstalled and reinstalled WEB EASY from my account with Admin Priv as well as Installed with the "Hidden Administrator" logon. Avanquest has of course said it is Microsofts problem and hung up. Apparently when I do an initial install and enter the serial code as requested it puts it in the worng place or somewhere that later users, including the Administrator, does not have access to; or the prgrram itself is locked out of.
I own a x86 (32bit) original copy of Windows Vista Home Premium. Since my CPU is 64bit I'd like to use a x64 edition of Vista. My question is: can I use my 32bit serial with a x64 edition? Do I need to active it by telephone (since I already activate my 32b copy)?
I own a x86 (32bit) original copy of Windows Vista Home Premium. Since my CPU is 64bit I'd like to use a x64 edition of Vista. My question is: can I use my 32bit serial with a x64 edition? Do I need to active it by telephone (since I already activate my 32b copy)?
Below is a list of software I have purchased, but am not using so I thought if anyone is interested in using any of the belowmentioned programs, send me a Private Message and I will provide you with my Serial/Activation Number/s.
Ace Utilities Acala DVD Copy CleanMyPC Registry Cleaner ConvertXtoDVD CyberLink DVD Suite 5 CyberLink Power2Go 5.5 CyberLink PowerDirector 6 CyberLink PowerDVD SE for Vista
I just upgraded my system's motherboard, chip, and ram and ran into a big problem. When I booted up for the first time, Vista started to boot up then reset. When I ran recovery, it told me some drivers were corrupted (probably the old hardware) . I ran the motherboard disk and installed the new drivers and to make a long story short, it didn't work. Add that to the fact that I can't find my serial number sticker and I'm screwed. Is there a way to find my serial using the Dos prompt or can windows pull my serial off my hard drive if I reinstall? Please help, the copy of Vista is only 4 months old and I was waiting to put the sticker on when I got the new case + Motherboard setup
I am unable to install drivers for the Serial ATA Controller that is displayed within the Device Manager and my HDD show up as an ST325062 0AS SCSI Disk Device. Even when I install the recommended driver for the Srial ATA Controller from the Windows Update website it still remains driverless. Now whether the following issues are related to this problem or not I am not sure, but I will state them here anyway.
After a certain period of time my entire system will freeze and I will have to reset my PC, although when I do it does not reset but powers down. This is continues if I use the restart command from the Windows Start Menu or automatically restart after the installation of a software package. This is extremely annoying. Having shelled out for the latest hardware in order to be compatible with Windows Vista 64 and then for this to happen is quite sickening.
Here's another stupid question from yours truely.....me! I have an ancient laptop with Win 95, and my Vista desktop. I also have a parallel to serial cable, male parallel at one end and a female serial at the other end. I had read something about a Direct Cable Connection, but I didn't see certain options that were needed to use it....even then, when I tried to install that service on the laptop, it asked for the Windows install disk, which is long gone..
I am a court reporter, hooked up via USB-serial adaptor to attorneys using a software called LiveNote to receive my steno translated into English. My Vista 8mth old computer has crashed 2X in the middle of the day with experts on the stand and on video. is this a vista issue or a hardware issue?
I have bought a second hand laptop with windows vista business installed. There is a sticker on the bottom of the laptop showing the installed windows is a genius one. But part of the label gets wore out. I want to make format the hard disk and do a clean re-installation of vista again. However, I am so worry that if I miss the serial number, I would be stuck in the middle of the process.
I have two label printers that use serial ports - but my new Vista HP Pavilion doesn't have any. Is there some connecting cord I can purchase to get the job done?
I am trying to connect a device that has a serial port connector to a Vista computer. I got a converter to plug it into a USB port. When I plug it in I get a message that it recognizes the device(converter) and has installed the drivers. When I try to use the hardware that uses the serial port I get a message that it cannot find a com port. I have tried to manually connect it to every com port the hardware's software offers, but no luck. How can I make this thing find a com port?
i am using vista home edition and i lost my cd but i have cd key behind my laptop as everyone have that one. So i dont know in this situation how do i re-setup my vista or repair. Now the problems that i am facing.I am using the hidden adminstator account.It was good but i guess i was effected by some virus. I was using bit deffender antivirus with all the latest updates. Also i use to update my windows regularly.But now i cant update my vista or run any programs properly.At first problem that i faced which is when i click any program it comes with the choose promt i mean when a program does not have the extention like for example .exe like .zip etc dont have then a choose promt come so same thing happen in everything even songs videos programs that i need to choose from the promt again the same file even i go though the program files i need to choose. Also i lost my admin rights i dont know why that thing happen.
Then i clear my pc with advanced system care 3 pro and fixed 2424 registry problems. But the problem didnt stop yet.Now when i click any programs or anything a message comes with: this file does not have a program associated with it for performing this action. Create an association in the set associations control panel. But this when i click right mouse button and run as start it works Like open run as adminstator then start button and this is happening to every program No program is running in the time of start up. even not antivirus or any program i need to click start to run any program
I have a Sony VAIO laptop with Windows Vista Home premium and I have a problem with my sound.
When I unplug my computer from the back to move to another room I lose my sound and I have to restart my computer to get it back. Can anybody help me to stop this from happening or how to fix without restarting my computer.
On my desktop, i recently found that there was an entry in my ALL PROGRAMS, that was "Programs". I thought i would not need it so shift deleted the "Programs" and now i cannot find anything under ALL PROGRAMS. :cry: There used to be alot of items like Windows Defender, Windows Updates, Fax and Scan, Mozilla Firefox, Yahoo Messenger, etc... Now its just blank. I tried system restore and recuva but nothing changed
My daughters forgotten her password on her laptop, i have tried all the usual methods to get in to it but to no avail, in both normal and safe mode, we don't have the XP disc as she bought the laptop from a friend, i have even thought about downloading ophcrack but it seems a bit long winded and a little confusing.
All of a sudden I went to up the volume with the up volume button and the volume bar is gone. The sound increases but to what level I don't know visually. I tried updating driver and that came back with best driver is all ready installed.
This is what I see on my C Drive with Vista Home Premium
1. 48.3 GB used space on Local Disk (C When I Click Local Disk C then Properties, Blue Red Pie (51,940,466,688 bytes)
2. 28.1 GB Size on Disk When I Open C & Select All, Then Click Properties (30,206,545,173 bytes)
3. That's a Difference of 20.2 GB & I Checked Show hidden files and folders & Remove the checkmark from the checkbox labeled Hide protected operating system files.
4. 33.2 GB is the size of my Compressed Backup on my Acronis TrueImage11 C Drive Backup to an External HD, so I think the 48.3 GB is true. Where could the 20.2 GB be hiding?
Yesterday, I opened a document (Office Student 2007) from my e-mail account on the web (not Outlook)
I clicked "Save" repeatedly throughout the day and was never prompted to select "Save As" and when I X'd out, it did not say "Are you sure you want to close without saving?" so, I assumed all was well. However,when I went back to open it, it wasn't there. I searched all the folders, hidden folders, temp internet files, etc. but cannot find it!
I was clicking "Save" so it has to be saved somewhere, right?
Hi there, the flienames are no longer being displayed when I view the contents of C: drive as icons. I am aware of how to hide/show filenames for any folder other than system ones using the ctrl key and 'View' menu, however this does not work with C: drive. Any ideas how I can get the filenames back with the icon views for this folder?
my windows mail has suddenly lost my folders & messages, it doesn't matter what I try I can't seem to get anything apart from a message popping up saying low memory or not enough disk space, & I only brought the laptop 3 days ago & only registered my email today I had 2 folders & 3 messages in my inbox.
